Hi there,
I am having a table in Sql which has 2 columns which has data in encrypted format. It shows data in junk format (ascii format). But in frontend (tht is in software)it shows data in proper format. Can any one help me in decrypting data.
Thanks,
Regards,
mystical
CREATE TABLE TabEncr (
id int identity (1,1),
NonEncrField varchar(30),
EncrField varchar(30)
)
CREATE MASTER KEY ENCRYPTION BY PASSWORD = 'OurSecretPassword'
CREATE CERTIFICATE my_cert with subject = 'Some Certificate'
CREATE SYMMETRIC KEY my_key with algorithm = triple_des encryption by certificate my_cert
OPEN SYMMETRIC KEY my_key DECRYPTION BY CERTIFICATE my_cert
INSERT INTO TabEncr (NonEncrField,EncrField)
VALUES ('Some Plain Value',encryptbykey(key_guid('my_key'),'Some Plain Value'))
CLOSE SYMMETRIC KEY my_key
OPEN SYMMETRIC KEY my_key DECRYPTION BY CERTIFICATE my_cert
SELECT NonEncrField,CONVERT(VARCHAR(30),DecryptByKey(EncrField))
FROM dbo.TabEncr
CLOSE SYMMETRIC KEY my_key
What is the problem with this code. It works fine , inserting the value encrypted but when i try to decrypt ,it returns a null value. What is missing. I also tried with symmetric key encryption with asymmetric key. Result is same, returns NULL value. I am using SQL 2005
Happy Coding...
I have following problem. I would like to provide to my STP encrypted data and decrypt them inside it. To decrypt the data I'd like to use DecryptByKey. Encryption should be made on the Win32/.NET client.
Unfortunately I cannot find the way to make the data understable between the both worlds. First how to assign the same key on the both side? Do I get the same key from
Code Snippet
create symmetric key MyKey with
algorithm=triple_des,
key_source='abrakadabra'
encryption by password='aaa'
and from
Code Snippet
string Key = "abrakadabra";
byte[] bKey = Encoding.ASCII.GetBytes(Key);
byte[] salt = new byte[8];
RNGCryptoServiceProvider rnd = new RNGCryptoServiceProvider();
rnd.GetBytes(salt);
PasswordDeriveBytes pdb = new PasswordDeriveBytes(bKey, salt);
TripleDESCryptoServiceProvider prov = new TripleDESCryptoServiceProvider();
prov.GenerateIV();
prov.Key = pdb.CryptDeriveKey("TripleDES", "SHA1", 168, prov.IV);
???
I have read somewhere that create symmetric key calls CryptDeriveKey, but I'm not sure.
The next point is the format of the output data. I have noted, that the output from EncryptByKey is 16 bytes longer (after stripping key guid and fixed 0x01000000) than the one from Win32/.NET application. I assume, that it can lie in the inserting of IV as the first block, but should not IV be only 64 bit long in the DES family of algorithms?
Neverthless I have not magaged to perform encrypted communication such way between SQL Server 2005 and client application. Is it possible at all?
I have a SQL Server Login and I forgot the password for it.
Is there any way I can decrypt the password. I don't want to
change the password.
Thanks
Venu
Hi!
I want to encrypt a whole column in my table and I do this with this SQL code:
OPEN symmetric key Sym_Key DECRYPTION BY certificate My_Cert
GO
UPDATE [My_demo].[dbo].[My-DemoList]
SET [Test_crypt] = encryptByKey(Key_GUID('Sym_Key'),[Test])
GO
CLOSE all symmetric keys
GO
And this seems ok but when I want to decrypt it with the view I have created it seems that I get a "rubbish" character between each "real" character.
So my questions is: What am I doing wrong?
Because if I do an insert like this
OPEN symmetric key Sym_Key DECRYPTION BY certificate My_Cert
GO
INSERT INTO [My-DemoList] (Test_crypt) VALUES(encryptByKey(Key_GUID('Sym_Key'),'1234567'))
GO
CLOSE all symmetric keys
And then use my view to look at the decrypted value that I put in its ok.
Many thanks in advance!
I find it weird when decrypting a column from a baked up database and restoring it to another database. Here's the scenario:
Server1 has Database1.
Database1 has Table1 with two columns encyrpted -- Card Number and SS Number
Encryption and decryption in this Database1 is perfectly fine. Records are encrypted and can be decrypted too.
Now, I tried to backup this Database1 and restore it to another server with SQL 2005 instance called Server2. Of course the columns Card and SS Numbers were encrypted. I tried decrypting the columns using the same command to decrypt in Database1, however, it returns a NULL value
Here's exactly what I did to create the encyprtion and decryption keys on the restored database:
-- Create the master key encryption
CREATE MASTER KEY ENCRYPTION BY PASSWORD = 'myMasterPassword'
-- Create a symetric key
CREATE SYMMETRIC KEY myKey WITH ALGORITHM = DES
ENCRYPTION BY Password='myPassword';
Go
-- Create Card Certificate
CREATE CERTIFICATE myCert WITH SUBJECT = 'My Certificate on this Server';
GO
-- Change symmetric key
OPEN SYMMETRIC KEY myKey DECRYPTION BY PASSWORD = 'myPassword';
-- I then verified if the key is opened
SELECT * FROM sys.openkeys
If I create a new database, say Database2 from that Server2, create table, master key, certificate, and symmetric key. Encrpytion and decryption on Database2 will work!
Any suggestions gurus? I tried all searches and help for almost 2 weeks regarding this issue but nobody could resolve this.
Thanks in advance!
faiga16
3 Posts
I have a OLE DB Source that has a varbinary column of encrypted data. The sorce table is on a hosted SQL Server database where I cannot install a asymetric key. The SSIS package is running on a local SQL Server box that does have the asymetric key installed and working. Can you recommend the best way to transform this column is SSIS using a connection to the local SQL Server box that has the installed public key?
select @encryptedstuff = 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
SELECT CONVERT(nvarchar(50),DecryptByAsymKey(AsymKey_ID('rsakey'), REVERSE(@encryptedstuff), N'P4ssw0rd'))
Each row of the OLE DB Source contains a varbinary column with the ecrypted data. I need to to transform that one column and end up with a new record set that contains all of the columns from the OLE DB Source plus a new decrypted column.
Thanks,
Steve
Hi all,As all of you are aware you can Encrypt your Triggers/Stored Procedures/Views And Functionsin Sql Server with "WITH ENCRYPTION" clause.recently i came across a Stored procedure on the Net that could reverse and decrypt all Encrypted objects.i personally tested it and it really works.That's fine (of course for some body)Now i want to know is it a Known Bug for Sql Server 2000 and is there a permanent solution for Encrypting mentioned objects.Thanks in advance.Best Regards.
View 2 Replies View RelatedHi all...
Im wondering how do you encrypt and decrypt a stored procedure within sql server 2000 ?
i want to be able to encrypt data been inserted / updated using triple des algorithm and then on select / read - decrypt it.
Does anyone know a solution / stored procedure on how to do this? any ideas.
Thanks
Paul..
Im also wondering if there is a away of doing this on the code side without using stored procedures (asp.net c#) i have been able to encrypt and decrpt to a string but unable to do it through the datagrid object (dataset) or a datareader..
Any tips / help would be helpful
Thanks..
i have a ms sql base which contains tables encrypted with EncryptByKey, who knows how to make me a script do save the encrypted tables to clear text pm me in ym : hgfrfv or msn : [URL], i have all the keys used on encryption and all those stuff.
View 1 Replies View Related....it's possible without any third party application?I need to recover some encrypted user functions but the sources have beenlost long time ago, someone can help me?--Lav.
View 2 Replies View RelatedHello,
In SQL 2000,
I have created a Stored Procedure as follows,
Code Snippet
CREATE PROCEDURE MyTest
WITH RECOMPILE, ENCRYPTION
AS
Select * From Customer
Then after this when i run this sp it giving me the perfect results wht i want, BUT when i want to change something in sp then for I am using the below line of code.
Code Snippet
sp_helptext mytest
But its displaying me that this sp is encrypted so you can't see the details and when i am trying to see trhe code of this sp from enterprise manager then also its not displaying me the details and giving me the same error,
So i want to ask that if there is a functionality of enrypting the sp code then is there any functionality for decrypting the Stored Procedure also,
or not,
If yes then wht it is and if NO then wht will be the alternative way for this,
?????
I am executing a stored procedure in one database (Database1) that pulls data from another database (Database2) that is the back end for a third party application. Some of the fields in that other database are now encrypted. I need to decrypt those fields but since the query is running in a database other than where the data lives (which is also where the symmetric key + cert lives), I am getting the following error: "Cannot find the symmetric key" Below is an example of what I am running in the stored procedure:
OPEN SYMMETRIC KEY [XXXXKey] DECRYPTION
BY CERTIFICATE [XXXX_CERT];
select CONVERT(Varchar(50), DECRYPTBYKEY( <ENCRYPTED FIELD> ))
FROM Database2.dbo.TABLE1
CLOSE SYMMETRIC KEY [XXXXKey];
What do I need to add to Database1 so the stored procedure can decrypt the data it pulls from Database2?
Hi,
Is there any way of decrypting password value stored in sysxlogins table of SQL database?
Thx in Adv
In SQL 2005, I've created a test scenario in AdventureWorks where I:
1.) Create a database master key:
IF NOT EXISTS (SELECT * FROM sys.symmetric_keys WHERE symmetric_key_id = 101)
CREATE MASTER KEY ENCRYPTION BY PASSWORD = '<password>'
GO
2.) Create a certificate:
CREATE CERTIFICATE HRCert
WITH SUBJECT = 'Comments'
GO
3.) Create a symmetric key:
CREATE SYMMETRIC KEY CommentKey
WITH ALGORITHM = DES
ENCRYPTION BY CERTIFICATE HRCert
GO
4.) Add a test column to the HumanResources.JobCandidate table:
ALTER TABLE HumanResources.JobCandidate
ADD Comments varbinary(8000)
GO
5.) Open the symmetric key for use:
OPEN SYMMETRIC KEY CommentKey
DECRYPTION BY CERTIFICATE HRCert
GO
6.) Insert and Encrypt values ('Yes') to the newly created column:
UPDATE HumanResources.JobCandidate
SET Comments = EncryptByKey(Key_GUID('CommentKey'), 'Yes')
GO
-------
Great. Now all the textbooks say that, to view the column values in a decrypted state, you should:
SELECT CONVERT(varchar, DecryptByKey(Comments)) AS [Decrypted Comments], *
FROM HumanResources.JobCandidate
------
Great, I get it. But here's the rub. What is the best way to permanently decrypt the column and keep it in a cleartext state?
Running the following works, but keeps the column values in a varbinary (hexadecimal) state which is what we originally created:
UPDATE HumanResources.JobCandidate
SET Comments = DecryptByKey(Comments)
GO
But if I want to transform this varbinary(8000) column into a human-readable varchar column, the only thing I could come up with was a temp table solution:
UPDATE HumanResources.JobCandidate
SET Comments = DecryptByKey(Comments)
GO
DECLARE @temp varchar(1000)
SET @temp = (SELECT TOP 1 CommentsFROM Human Resources.JobCandidate)
CREATE TABLE #decrypt (Comment varchar(1000))
INSERT INTO #decrypt (Comments) VALUES (@temp)
GO
ALTER TABLE HumanResources.JobCandidate
ALTER COLUMN Comments varchar(1000)
GO
UPDATE HumanResources.JobCandidate
SET Comments = (SELECT Comments FROM #decrypt)
GO
DROP TABLE #decrypt
GO
--------
It works, but seems so inelegant to me.
Is there an easier way?
I have an encrypted column of data that is encrypted by a passphrase. The passphrase was encrypted by a symetric key in a key pair. The passphrase also is stored in a table. I can get the passphrase as needed to encrypt/decrypt the columns. I copied the production database to a new database for development. Subsequently I had to create a new symmetric/asymmetic key pair and recreated my passphrase with the new key pair. Now the passphrase will decrypt a text column but it will not decrypt two other columns which are of type varchar in the database. Here is an example:
DECLARE @pss varchar(30)
EXEC [dbo].[uspPassPhraseGet] @pss OUTPUT
SELECT DISTINCT contactid, uissueid, createdby, created_dt
,CONVERT(varchar(max),DecryptByPassPhrase(@pss, CONVERT(varchar(max),dbo.tbl_msg_app_legislativeinquiry.title), 1, CONVERT(varbinary, 23))) as title
,CONVERT(varchar(max),DecryptByPassPhrase(@pss, CONVERT(varchar(max),dbo.tbl_msg_app_legislativeinquiry.description), 1, CONVERT(varbinary, 23))) as description
,CONVERT(varchar(max),DecryptByPassPhrase(@pss, CONVERT(varchar(max),dbo.tbl_msg_app_legislativeinquiry.shortdesc), 1, CONVERT(varbinary, 23))) as shortdesc,
closed_dt, confidential, statusid, due_dt, deleted_dt,deletedbyid, highrisk, dbo.tbl_msg_app_legislativeinquiry.designator, dbo.tbl_ref_sys_status.description AS statusdesc
FROM dbo.tbl_msg_app_legislativeinquiry INNER JOIN
dbo.tbl_ref_sys_status ON statusid = dbo.tbl_ref_sys_status.ustatusid INNER JOIN
dbo.tbl_gbl_lkp_security ON uissueid = dbo.tbl_gbl_lkp_security.msgid AND
dbo.tbl_msg_app_legislativeinquiry.designator = dbo.tbl_gbl_lkp_security.designator
Like I said I can execute the uspPassPhraseGet stored procedure and I get my passphrase. It will correctly decrypt the dbo.tbl_msg_app_legislativeinquiry.description field which is great but the other two fields will not decrypt. When i copied the database over the encrypted fields do not display the same on the new database. The old database shows a box character followed by a bunch of junk (as expected). The new copied table on the new database shows only a single box (not the same as the original). Is there a known bug with copying a table with varchar fields that are encrypted to a new database? I tried to run a test and got the same result. I also tried to convert the varchar columns to text to see if that solved the problem and it didn't. The description field however is a text type column and it reads exactly as the original. The problem I think is that the Copy Database didn't actually copy my data correctly. How can I get the original encrypted data from the production into my development. I also tried just dropping the table and reimporting the table but that didnt take either. Scratching my head on this one.
Hi, all here,
Thank you very much for your kind attention.
I am wondering if it is possible to use SSIS to sample data set to training set and test set directly to my data mining models without saving them somewhere as occupying too much space? Really need guidance for that.
Thank you very much in advance for any help.
With best regards,
Yours sincerely,
After testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
I have used both data readers and data adapters(with datasets) in the projects that I have worked on. I am trying to get some clarification on when I should be using which one. I think I am doing this correctly but I want to be sure I am developing good habits.
As the name might suggest, it seems like a datareader is for only reading data. I have read that the data adapter and dataset are for a disconnected architecture. Or, that they can be used for this type of set up. I have been using the data adapter and datasets when writing to a database and the datareader when reading from a database.
Is this how these should be used? Is the data reader the best choice for reading data? Am I doing this the optimal way from a performance stand point?
......................................................thanks in advance
We already integrated different client data to MDS with MS Excel plugin, now we want to push back updated or new added record to source database. is it possible do using MDS? Do we have any background sync process to which automatically sync data to and from subscriber and MDS?
View 4 Replies View RelatedWhen I enter over 4000 chars in any ntext field in my SQL Server 2005 database (directly in the database and through the application) I get an error saying that the data could not be updated because string or binary data would be truncated.Has anyone ever seen this? I cannot figure out what is causing it, ntext should be able to hold a lot more data that this...
View 7 Replies View RelatedI have a requirement to implement CDC for 50+ tables to implement incremental data changes warehouse/reporting rather than exporting the whole table data. The largest table is having more than half a billion records.
The warehouse use a daily copy of OLTP db (daily DB refresh). How can I accomplish this. Is there a downside in implementing CDC just for the sake of taking incremental changes on the tables?
Is there any performance impact if we enable CDC on OLTP db?
Can we make use of the CDC tables on the environment we do daily db refresh so that the queries don't hit OLTP database?
What is the best way to implement CDC to take incremental changes for reporting.
Hi,This is driving me nuts, I have a table that stores notes regarding anoperation in an IMAGE data type field in MS SQL Server 2000.I can read and write no problem using Access using the StrConv function andI can Update the field correctly in T-SQL using:DECLARE @ptrval varbinary(16)SELECT @ptrval = TEXTPTR(BITS_data)FROM mytable_BINARY WHERE ID = 'RB215'WRITETEXT OPERATION_BINARY.BITS @ptrval 'My notes for this operation'However, I just can not seem to be able to convert back to text theinformation once it is stored using T-SQL.My selects keep returning bin data.How to do this! Thanks for your help.SD
View 1 Replies View RelatedI'm using Script Component to load data into Oracle DB due to the poor performance issue. Now, I found it will missing some data during the transmission. Please see the screenshot below:Â
SQL Server：
Oracle:
DDL:
create table Person
(
BusinessEntityID Integer,
FirstName nvarchar2(50),
MiddleName nvarchar2(50),
LastName nvarchar2(50)
);
Result:
I follow up this article:Â [URL] ....
VB Script:Â
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
[Code] ..........
Hi all, i got this error:
[DTS.Pipeline] Error: "component "Excel Source" (1)" failed validation and returned validation status "VS_NEEDSNEWMETADATA".
and also this:
[Excel Source [1]] Warning: The external metadata column collection is out of synchronization with the data source columns. The column "Fiscal Week" needs to be updated in the external metadata column collection. The column "Fiscal Year" needs to be updated in the external metadata column collection. The column "1st level" needs to be added to the external metadata column collection. The column "2nd level" needs to be added to the external metadata column collection. The column "3rd level" needs to be added to the external metadata column collection. The "external metadata column "1st Level" (16745)" needs to be removed from the external metadata column collection. The "external metadata column "3rd Level" (16609)" needs to be removed from the external metadata column collection. The "external metadata column "2nd Level" (16272)" needs to be removed from the external metadata column collection.
I tried going data flow->excel connection->advanced editor for excel source-> input and output properties and tried to refresh the columns affected.
It seems that somehow the 3 columns are not read in from the source file?
ans alslo fiscal year, fiscal week is not set up up properly in my data destination?
anyone faced such errors before?
Thanks
When I execute the below stored procedure I get the error that "Arithmetic overflow error converting expression to data type int".
USE [FileSharing]
GO
/****** Object: StoredProcedure [dbo].[xlaAFSsp_reports] Script Date: 24.07.2015 17:04:10 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[Code] .....
Msg 8115, Level 16, State 2, Procedure xlaAFSsp_reports, Line 25
Arithmetic overflow error converting expression to data type int.
The statement has been terminated.
(1 row(s) affected)
is there a step by step paper to get there? here is what i need to consider. I Iwill have many customers that will need their own set of records and access pages "branded for their company" each customer will have many clients. I am hosting this application on a windows 2003 server with SQL 2005 server enterprise.
I am using windows authentication, I have created a username in windows, then i added the windows user in SQL management studio in security, granted "DB Read" and "DB write" and again under the database security tab. still from the web authentication fails. i must be nissing a step or two?
I expect to set up a username for each database as i setup new customers.
RE: XML Data source .. Expression? Variable? Connection? Error: unable to read the XML data.
I want my XML Data source to be an expression as i will be looping through a directory of xml files.
I don't see the expression property or the connection property??
I tried setting the XMLData property to @[User::filename], but that results in:
Information: 0x40043006 at Load XML Files, DTS.Pipeline: Prepare for Execute phase is beginning.
Error: 0xC02090D0 at Load XML Files, XML Source [108]: The component "XML Source" (108) was unable to read the XML data.
Error: 0xC0047019 at Load XML Files, DTS.Pipeline: component "XML Source" (108) failed the prepare phase and returned error code 0xC02090D0.
Information: 0x4004300B at Load XML Files, DTS.Pipeline: "component "OLE DB Destination" (341)" wrote 0 rows.
Task failed: Load XML Files
Information: 0xC002F30E at Bad, File System Task: File or directory "d:jcpxmlLoadjcp2.xml.bad" was deleted.
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
The program '[3312] Package.dtsx: DTS' has exited with code 0 (0x0).
Thanks for any help or information.
I setup this package to import data from a Sharepoint list to a SQL Server data table. The primary key of my SQL table is mapped to the Title column of my Sharepoint list. There is a possibility that duplicate values will be entered in the Title field of the Sharepoint list. So when importing data into my table via SSIS, my package always error-out when there it comes across duplicate values. how you others have managed data integrity when importing from a Sharepoint list with the Title column being mapped to the primary key of a table.
View 4 Replies View RelatedHello,
I am wondering what conversion rules apply, when a string, which contains a number, is saved to a SQL Server 2005 into a column of type decimal.
This is the code I€™m using (C++):
CString cValue = "0.75"
_variant_t vtFieldValue;
vtFieldValue = _variant_t(cValue)
pRecordSet->Fields->Item["MyColumn"]->Value = vtFieldValue;
"pRecordSet" is an ADO recordset. The database column "MyColumn" is of type "decimal(19,10)".
The most important question for me is, if the regional settings of the database server or the regional settings of the client PC are considered during the conversion from the string to the decimal value. For example in standard French regional settings the "." would not be recognized as decimal separator.
I am also wondering if the language of the database instance, in which this data is saved, is considered during this conversion or any other settings of this database instance.
So my general question is: Does anybody know exactly what rules apply during the above mentioned conversion?
Thank you for your help.
Regards,
Volker
I've question about how to handle structural datamodel changes in a datasource of PowerPivot. Suppose I'm developing a starmodel in SQL Server and sometimes a datatype changes or a name of a field changes in a table. It seems to me that PowerPivot handle this not gracefully as Analysis MD does (mostly). I received an error because of a wrong fieldname or even no error when a dattype changes in PowerPivot. Is this common or do I something wrong here. Does this mean that every time the datamodel changes the PowerPivot should be recreated? Or am I missing the clue here?
View 6 Replies View RelatedHi everyone,
I have to extract, dayly a list of contacts on a exchange server in a table on our EDW on sql server 2005. Is it possible to get the information directly from a dataflow or i will have to developpe a script task ?
Need help desperatly !!!
I am getting ErrorCode 8 while loading the data from stage to model. I have checked my error view it states that "Member Code is Inactive".
Initially I have loaded same set of data in Model from MDS Stage table but then deleted with ImportType = 5 which removed all the data from the MDM model.
Now i want to load it back but its giving the Error Code 8 .. Before loading the same data i have changed the stage table Importtype to 2 and Importstatusid to 0.