Default Values Does Not Include All The Values (Cascading Parameters)
Mar 18, 2007
A have a multi-valued parameter (B) which is dependent on a single-valued parameter (A) on my report. When a value is selected in A, I want all matching values in B to be selected by default and the "Select All" option checked. To do this I have set the Default Values section in B to point to the same dataset as the "Available Values" section. Both A and B have default values so the report runs automatically.
One of the values in parameter A (say Value1) yields more values in parameter B than the other (say Value2).
If I run the report the first time with Value1 selected as the default for parameter A, all values in B are checked correctly. If I run the report with Value2 selected the first time and then change the selected value to Value2 and run my report, all values in B are displayed but only the values that were previously checked (when Value1 was selected), are now checked, leaving the "Select All" unchecked.
What am I doing wrong? Why are all the values in B not checked? The dataset is the same in "Available Values" section and "Default Values" section.
View 8 Replies
ADVERTISEMENT
May 30, 2014
I am working with SP. How can we find out values of parameters when the SP is executed with the default values?
View 9 Replies
View Related
Feb 11, 2008
Hi,
I would like to set up cascading report parameters but need to supply the list of values in my dataset query as they are not being pulled from a table or stored procedure.
I would like to set up something like
select 'LS' Source
Union
select 'RH' Source
Union
select 'UK' Source
as the value list for my first parameter, then, I would like the second parameter to default to '1' if the first parameter has 'RH' or 'UK' selected but default to blank if the first parameter has 'LS' selected. I can get all to default to blank or 1 but can not seem to make it dependent.
thanks!
Martha
View 2 Replies
View Related
Aug 1, 2006
This is regarding Report Services 2005 designing the report in Visual Studio.
Currently I am using a query to populate 2 date selectors in the parameter section at the top of a report. The start and end dates are determined by a query which returns the values based on yet another parameter. If I change the value of the paramter which is supposed to be used by the date selectors they don't seem to feel the need to re-calc themselves. I have 3 other dependent param's in the same report which behave reasonably.
Has anyone seen this before or is there way to somehow force a parameter re-caluclation?
jSiegel
View 1 Replies
View Related
Jul 23, 2005
I'm generating a list of parameters needed by stored procedures, and
I'd like to know which ones have default values assigned to them.
To retrieve the parameter information I use:
sp_sproc_columns @Procedure_Name='InsertUser''
However, the column that is supposed to give the default value,
'COLUMN_DEF' always returns as NULL, even when that column has a
default value assigned to it.
i.e.
CREATE PROCEDURE InsertUser@UserID INT = 10,.....
And then if I do a sp_sproc_columns @Procedure_Name='InsertUser'', the COLUMN_DEF value for the @UserID column is still NULL.
Does anyone know what I'm doing wrong and how I can retrieve the default value?
Thanks
View 1 Replies
View Related
Apr 26, 2007
I have created a report, and am setting default values for the parameters. Once the default parameters is set, the report automatically generates. Is there a way to make it not automatically generate the report? We are setting the parameters with values that will get the end user the most recent data, but alot of times, they will want to pull older data as well. We don't want them to have to wait for the report to automatically generate before they can change the parameter values
View 1 Replies
View Related
Nov 10, 2006
If all the parameters for a report have default values, the report runs automatically as soon as you open it. Is there a way to prevent this?
View 9 Replies
View Related
Mar 3, 2007
I have 5 cascading parameters. They all have default values. I would like the default value of each of these to be selected when the report opens.
It currently works correctly when I preview the report, however when I deploy the report to the server it does not. In the deployed report, the default value of the first parameter is not selected. However, when I select a value for this one, on postback the rest of these parameters get set to their default value. They're all configured the same. I'm confused as to why the first one doesn't default to its default value while the others do.
Got any ideas?
Here's how I have it configured:
Allow null value CHECKED
Allow blank value CHECKED
The rest are unchecked.
Available values: From query
Default Values: Non-queried with a value supplied that exists in the dataset.
View 1 Replies
View Related
Apr 11, 2008
I have my stored procedure set to
Territory_code IN (@Territory)
, now , how do i enter in more then one value. When i select the multi value check box, it gives me more spaces. But then doesnt recognize the values when i put in more then one. am i doing something wrong?
The field is a Varchar 20
View 1 Replies
View Related
Jun 17, 2012
I am SSRS user, We have a .net UI from where we want to pass multi select values, but these values are comma separated in the database. how can I write a sql query such that when I select multi values on my UI, the comma separated values are take care of.
View 5 Replies
View Related
Oct 15, 2007
Hi,
I have parameters in my report. The user can choose the year, month and date (3 parameters).
Now I want to set default vaules for the parameters , so that the user sees the report for example for the current day without selecting the parameters. I tried to set the type of the parameters to DateTime and the default value for example for the year to "=Today().Year" . But when I execute the report an error occures . Something like : no validValue for this parameter.
My Attributes for the year month and date are from an Analyis Services Cube from a Server Time dimension .
Does somebody know how to make it possible to set default values for this parameters?
Other question :
Does somebody know how I can reduce the values for a parameter. For Example I have a parameter "year" from a server time dimension from a cube. The values which are available are "Year 2004", "Year 2005", "Year 2006", "Year 2007".
But I want that the user only can choose "Year 2006" or "Year 2007" ant not every Year or "All".
Or Other Example: The User should only choose a Date that is int the past or Today but not a Date in the future.
Thanks !
JF
View 7 Replies
View Related
Oct 9, 2006
Hi,
I am using RS2005. i have a requirement in which i need to pass more than 1 value to a parameter. this parameter is used in a dataset for filtering.
Eg: if i have a parameter as @years, i want to assign values 2005, 2006 to it and use it in the dataset to filter like select.... where year in (@years).
How can i achieve this?
Thanks
Vivek S
View 13 Replies
View Related
Aug 3, 2015
My sql gives me the results as shown in #TEMTAB Table.some times Mitem_id is repeated for the same Group_id,SGroup_id with different item_id
ex: SQ322,SQ323,SQ324,SQ325 are repeated here.
CREATE TABLE #TEMTAB
(Group_id int, SGroup_id int, item_id int, Mitem_id varchar(10)
,YN varchar(2),value varchar(8),reason varchar(20))
[code]...
View 8 Replies
View Related
Apr 28, 2015
How to include row values as columns in my select query. I have a table that stores comments for different sections in a web application. In the table below, I would like display each comment as a new column. I only want one row for each record_ID.
Existing table layout
table name - tblcomments
Record_ID Comment_Section_ID Comment
1 5 Test 5 comment
1 7 Test 7 comment
2 5 New comment
2 7 Old comment
3 5 Stop
3 7 Go
Desired table layout
table name - #tempComment
Record_ID Comment_Section_5 Comment_Section_7
1 Test 5 comment Test 7 comment
2 New comment old comment
3 Stop Go
Once I figure out how to get the data in the layout above, I will need to join the table with my record table.
table name - tblRecord
Record_ID Record_Type_ID Record_Status
1 23 Closed
2 56 Open
3 67 Open
4 09 Closed
5 43 In progress
I would like to be able to join the tables in the query below for the final output.
Select r.Record_ID, r.Record_Type_ID, r.Record_Status,
c.Comment_Section_5, c.Comment_Section_7
from tblRecord r
left outer join #tempComment c
on r.record_ID = c.record_ID
How I can get the data in the desired #tempComment table layout mentioned above?
View 2 Replies
View Related
Mar 2, 2006
I need to set the default value of a field in my table to 'Regular' if nothing is inserted to that field. Is it not as easy as putting ('Regular') in Default Value?
View 4 Replies
View Related
Aug 3, 2001
How do you enter a default value where it is a combination of values ?
I want a default value to be entered into a field every time a create a new record.
The field will contain the "primary key number" + username
Cheers
Gary
View 1 Replies
View Related
Dec 27, 2005
We have a table that needs to have 00 as the default values in the columns until the point in time where they are updated with the values that we will use. The updated values will be two numbers 1-7 and 3-9 example 47, 14, 26, 68. This is a nvarchar data type in the columns. When I try to set the default values to double zero 00, after i click save it changes them to a single zero 0 instead of a double zero 00.
Miranda
View 4 Replies
View Related
Feb 11, 2008
This is the query that I have.
Code Snippet
SELECT * FROM [scholarship]
WHERE ([sectionID] = @schoolID OR @schoolID IS NULL)
AND ([schlrPrefix] LIKE '%' + @scholarship + '%' OR [schlrName] LIKE '%' + @scholarship + '%'
OR [schlrSufix] LIKE '%' + @scholarship + '%' OR [schlrPrefix] + ' ' + [schlrName] LIKE '%' + @scholarship
OR [schlrPrefix] + ' ' + [schlrName] + ' ' + [schlrSufix] LIKE '%' + @scholarship OR @scholarship IS NULL )
AND ([Specification] LIKE '%' + @major + '%' OR @major IS NULL )
AND ([reqr1] LIKE '%' + @requirement + '%' OR [reqr2] LIKE '%' + @requirement + '%' OR [reqr3] LIKE '%' + @requirement + '%' OR [reqr4] LIKE '%' + @requirement + '%' OR [reqr5] LIKE '%' + @requirement + '%' OR @requirement IS NULL )
How do I insert/add a default value in if the query above generates zero result?
View 4 Replies
View Related
Aug 23, 2006
I have a row of data being inserted in to a db table with default values, say:
Name Date1 Date2 and I'm inserting VALUES 'myName','12/04/83',NULL
Is there any way for the field Date2 to take the value being inserted into Date1 (ideally via default value)?
(Any good database tutorials would be handy! Thanks)
View 1 Replies
View Related
Sep 22, 2004
I am designing a new Database using SQL Server 2000 Enterprise Manager. I have a field called Phone, Fax and Zip.
Under Enterprise Manager I am trying to set up default values for these fields
Phone, Fax = 000-000-000
Zip = 00000
However Sql Server truncates it to 0.
How do I default value as shown about in SQL server?
View 5 Replies
View Related
Oct 26, 2000
Does anyone know if or how I can insert a default value of the (+) character into a column? when I try to save it I get an error message saying it has a problem with ')'.
View 1 Replies
View Related
Jun 15, 2001
I have a DTS package that is connected to a table in an Access97 database and to a duplicate(by schema) table in SQL2000. If there is a default value in the Access97 field properties the DTS package will import that value regardless of any other value in the Access field. I can not see anything in the DTS designer that handles this choice.
Even when I look at the Access connection in preview it shows only the default values.
Any thoughts on getting the actual values?
Thanks
View 1 Replies
View Related
Aug 12, 2014
I need to insert a record in a table which has about 90 columns.
My first column is a CustCode that would be supplied by parameter all other columns should be set to 0
Is there a quick way of doing this?
View 5 Replies
View Related
Nov 13, 2006
The columns fro which we do not enter any values.Fro eg in my table i did not insert any values to Balance col,in my table.
In SQL 2005,management studio,when i said modify table and changed the default to 0 from NULL and also unchecked the checkbox saying Allow Nulls.
I did the above changes and said save.It gave an error saying
'AccountsBalance' table
- Unable to modify table.
Cannot insert the value NULL into column 'Balance', table 'AccountBalanceSheet.dbo.Tmp_AccountsBalance'; column does not allow nulls. INSERT fails.
The statement has been terminated.
Plz help
Poornima
View 2 Replies
View Related
Jul 20, 2005
How can i change the default value of a column? I already have a columnnamed DateOfRental but I want to alter it so that it has default valuegetdate()ThanksDavid--http://www.nintendo-europe.com/NOE/...=l&a=Prodigious
View 4 Replies
View Related
Jun 6, 2006
Pardon the newbie question...but I'm trying to load a dimension table in a small data mart that has columns in it that are unique to the dimension and not sourced from any source table. Two of those columns are date columns that I want to default to the system date and the other column I want to load with a default value. I can't figure out how to do this within a data flow task. The source columns flow from the input db source into a scd transform but I can't seem to edit the columns in the target table table if they don't actually come from a data source. There doesn't seem to be a data transform object to handle this.
Thanks.
View 5 Replies
View Related
Jul 18, 2007
I have a report that I run where the selected MONTH and YEAR defaults to the prior month and year. When I run the report it shows the parameter values show as June 2007. Which is correct since this is July.
If I schedule the report to run on the 1st of every month will it default to the prior month/year automatically (I have the "use default" box checked).
View 1 Replies
View Related
May 23, 2007
Is there a way to hide my default values? If so, how?
View 13 Replies
View Related
Aug 4, 2006
Building the database I have come across different databases some that add a default value for every field and some that don't. I feel it is a hassle to add a default value, keep track if it is added.
I guess with a default value there would be no "NULL" values in the database but one could also make sure in the C# code that all the fields have a value when inputed and on the way out check for nulls.
What is the right way????
Pros and cons.........
Newbie
View 1 Replies
View Related
Nov 16, 2006
I have a this SP that inserts values into a table with results from a query, but at the same time I want to insert some default values.But thats NOT working the way I hoped for, actually sqlserver 2005 dont let me create this SP at all."Incorrect syntax near the keyword 'DEFAULT'."Can someone please tell me how I can achieve this? create procedure %PROC% ( @Ordre_ID int
)
asbeginIF NOT EXISTS(SELECT Ordre_ID FROM tbl_Ordre WHERE Ordre_ID = @Ordre_ID AND Ordrestatus IN ('2', '3', '4'))BEGIN return 0;ENDIF EXISTS(SELECT Ordre_ID FROM tbl_Faktura WHERE Ordre_ID = @Ordre_ID)BEGIN return 0; ENDBEGIN TRANSACTIONINSERT INTO tbl_Faktura( Ordre_ID ,PostNummer ,KID ,Fakturastatus ,Kontonummer ,Forfallsdato ,Belop ,BekreftetBetaltDato ,Faktura_GUID ,Adresse ,PostBoks ,Fornavn ,Etternavn ) (SELECT O.Ordre_ID ,K.PostNummer ,DEFAULT
,DEFAULT
,SI.Kontonummer
,(getdate()+14) ,v_OTS.TOTALBELOP ,DEFAULT
,DEFAULT
,K.Adresse
,K.PostBoks
,K.Fornavn
,K.Etternavn
FROM
tbl_Ordre AS O INNER JOIN
tbl_Kunde AS K ON
O.Kunde_ID = K.Kunde_ID
INNER JOIN
v_OrdreTotalSum AS v_OTS ON
O.Ordre_ID = v_OTS.Ordre_ID
,tbl_StatiskeInnstillinger AS SI WHERE
O.Ordre_ID = @Ordre_ID
)
UPDATE
tbl_Ordre
SET
Ordrestatus = '6'
WHERE Ordre_ID = @Ordre_ID COMMIT end
go
View 3 Replies
View Related
May 20, 2007
Hi, I have something similar to the following: CREATE PROCEDURE dbo.MySproc @columnVal int = nullASBEGIN SELECT * FROM MyTable WHERE MyTable.column = @columnVal END If columnVal is not passed into the stored proc i want it to just select everything from 'MyTable' (without the WHERE clause)....how can I do this in as few lines of code possible?thanks
View 3 Replies
View Related
Feb 8, 2001
Hi, all, does anyone know of a way to change default values inside of a table without affecting existing values?
I have a table with default = 0 in usermask column. Some rows already have non 0 values in them. I now need to change the default to 1 but still want the non 0 values be there. I also want the new default to take effect when new rows are entered. What's the best and quickest way to do it?
Thanks for advice.
Richard
View 2 Replies
View Related
Apr 5, 2007
In my datawarehouse fact table I have a column (revenue) that I want to populate based on the values of number of columns, for simplicity, say just 2 columns, 'productid' and 'affiliateid'.
I have a revenue lookup table, with those same 2 columns and the amount. So far so simple, but rather than have one row for every possible combination, I use 0 to mean default. For instance, all the affiliates have the same revenue value apart from a couple, so instead of 200 rows identical except for the affiliateid, I have one row with a '0' for the affiliateid and 4 rows with specific affiliateIDs where it differs from the default.
E.G.
AffiliateID, TypeID, Revenue
0, 1, £50
22, 1, £55
33, 1, £57
0,2,£60
22, 2, £66
33, 2, £69
To update the values, I join to the revenues table twice, one for both columns matching, and once for the default. I.E.
UPDATE facttable SET revenue = ISNULL(rev1.revenue, ISNULL(rev2.revenue,0))
FROM facttable FT
LEFT OUTER JOIN revenues rev1 ON FT.AffiliateID = rev1.AffilateID and FT.TypeID = rev1.TypeID
LEFT OUTER JOIN revenues rev2 ON rev1.AffilateID = 0 and FT.TypeID = rev1.TypeID
(In fact, this is over-simplified, because in fact there are 3 columns, so I have to have 8 joins like this).
This works very well, and cuts down the management of revenues significantly, there are a few 100 rows instead of the more than 100,000 there would be if I put every possible combination of values in its own row.
However, now there is a requirement to increase the granularity of the revenue allocation up to 5 columns, which makes 36 joins and there could well be more columns added later.
Has anyone come across a situation like this (and found a neater solution).
View 2 Replies
View Related
