Hi,
I need to populate some SqlParameter but I temporarily need to populate with a default value for the data type in question. Of course I can work them out, but I was wondering if there is already a way of doing this, from the .Net Classes or from SQL Server but without making a trip to the DB.
Thanks
John
Is there a way to change the default data type in SQL Server? If I import a database into SQL Server it makes every non-numeric field a nvarchar field. Is there a way to change this so that these fields would be varchar or char by default? I cannot find any way to redo these as a batch/group update and have to modify every single field manually. Any insights greatly appreciated.
View 4 Replies View RelatedHi,
I have a data transform from a flat-file to a SQL server database.
Some of the flat-file fields have NULL values. The SQL table I'm
importing into does not allow NULL values in any field, but each field
has a Default value specified.
I need to have it so that if a null value comes across in a field using
the data transform, it takes the table default on import. I could of
sworn I had this working a few days ago, but I get errors now that
state I'm violating table constraints. Has anyone done this before?
Thanks
Jeff
Hi,
I´m exporting an ms-excel file, then I use a lookup transformation to get a field from a SQL Server 2005 table. The Lookup transformation editor, after selecting the table, shows a warning that says:
at least one mapping between a column from available input columns ans a column from available lookup columns must be defined on the columns page.
So I try to make a relationship in the Lookup transformation editor's column tab where I find the Available input columns and the available lookup columns but I get the following error:
The following columns cannot be mapped:
[Department, DEP_CLEGALCODE]
One or more columns do not have supported data types, or their data types do not match.
The field in SLQ Server is varchar(10) and the input field is a derived column transformation; I have tried different Data Types but I always have the same error.
The DataFlow is: ExcelSource --> Derived Column --> Lookup --> Flat file destination
thanks.
How to set default values for selection list navigator without using parametrized queries for data source view.
View 2 Replies View RelatedI am designing a new Database using SQL Server 2000 Enterprise Manager. I have a field called Phone, Fax and Zip.
Under Enterprise Manager I am trying to set up default values for these fields
Phone, Fax = 000-000-000
Zip = 00000
However Sql Server truncates it to 0.
How do I default value as shown about in SQL server?
Does anyone know of any cross-references between SQL Server data types and the new data types introduced with SQL Server Integration Services?
View 6 Replies View RelatedHi,
I am experiencing some problems calling reports in ReportServer using URL.
I have several multivalue parameters that are not being set through the URL. The values for this parameters should be the default ones that I have set in VS.
When I preview the report in VS, the default values are correctly set but, when using the URL call, I keep being prompt for this parameters and the report is not rendered until I set them manually.
Does anyone ever had this problem?
Thank you in advance
Catarina Ribeiro
I have my stored procedure set to
Territory_code IN (@Territory)
, now , how do i enter in more then one value. When i select the multi value check box, it gives me more spaces. But then doesnt recognize the values when i put in more then one. am i doing something wrong?
The field is a Varchar 20
I am working with SP. How can we find out values of parameters when the SP is executed with the default values?
View 9 Replies View RelatedI'm new to SQL Server, but could someone explain how to set up a field with an auto number/increment that can be used within an Access DB?
View 4 Replies View RelatedI am trying to write a generic stored procedure to return the data type of a given col in a given table in any database.
I would like to place this sp in master.
input parms are @TableName sysname and @ColName sysname
ouput parm is @data_type varchar(128)
set @data_type=''
select @data_type = data_type from information_schema.columns where table_name = @TableName and column_name = @ColName
when debugging this I always get 0 rows (@data_type remains '')
I have a thought that I can add an input parm for the database, say @DbName sysname
But I am having trouble updating the select stmt to be something like
...from @DbName +'.' + information_schema.columns.
Any Ideas?
Thanks for your help.
Very simple ...
Where can I find a web site that explains the difference between sql server express data types?
thx.
SQL Server 2000, ASP.Net 1.1
I've been writing this stuff for a while, and can't seem to come to the
conclusion of how I should be retrieving data and assigning this data
to variables.
Since i'm using SQL Server, I'm convinced that I should be using the
datareaders GetSqlDouble (or whatever) function, but this would mean i
need my local variables to be one of the SQL types. The problem
with that is, that there will have to be lots of conversions done by me
to be able to use a SQL type in my application.
For instance, I have a class where i'm retrieving dates. In order
to retrieve them correctly (Null values included), I need to retrieve
them with GetSqlDateTime(), then when it comes time to display the date
in a table, i must first check for nulls, then convert to a
string. This seems to be very cumbersome. Would I be better
off just using GetDateTime(), and the .ToString method, and ignoring
Sql Types all together?
so, basically, how are you guys using your sql server data? with
the supplied sql types, and doing all of the post-processing work
manually? I feel like i'm having trouble conveying my
issue...hopefully someone knows what i mean....i'd just like some
direction to save trouble in the long run, since i feel like there's
got to be a better way...
Confused!
Thanks,
JJ
A have a multi-valued parameter (B) which is dependent on a single-valued parameter (A) on my report. When a value is selected in A, I want all matching values in B to be selected by default and the "Select All" option checked. To do this I have set the Default Values section in B to point to the same dataset as the "Available Values" section. Both A and B have default values so the report runs automatically.
One of the values in parameter A (say Value1) yields more values in parameter B than the other (say Value2).
If I run the report the first time with Value1 selected as the default for parameter A, all values in B are checked correctly. If I run the report with Value2 selected the first time and then change the selected value to Value2 and run my report, all values in B are displayed but only the values that were previously checked (when Value1 was selected), are now checked, leaving the "Select All" unchecked.
What am I doing wrong? Why are all the values in B not checked? The dataset is the same in "Available Values" section and "Default Values" section.
I trust you'll bear with an SQL Server newbie with what may seem a rather inane request. I am designing a web app in Web Designer 2005 Express with SQL Server Express. Unfortunately, I'm finding a little confusing with some of the data types when designing tables. I have tried to find information on the various Microsoft sites (general site, MSDN, here) and while I found one document that had a table comparing data types in different implementations of SQL, it wasn't at all helpful. Most of my confusion is with the various string and char types; the numeric types seem pretty straight forward for the most part. However, it might be helpful to know the difference between money and smallmoney/datetime and smalldatetime, particularly space/size information and formatting options (unless the latter is up to the interface). It would also be helpful to know which string/char types correspond to any counterparts they might have in, for instance, Access (with which I am already quite exprienced). Or any particular quirks or idiosyncracies they might have. I don't expect anyone to write a full tutorial, but if someone could point me in the direction of a good online doc, it would be most appreciated. You might well ask, why not use Access databases? I would answer...I like to learn new stuff!
Thanks much.
Hi,
Can anybody give me some information on Table data types of SQL2K.
How and where can it be used. Does it make the queries faster, in case there are many users using ?
Please could anybody give me these details, to make me decide whether I can use it or not ?
Thanx and Regards,
Sushma
We have a query that joins column A int which is an int onto column B with contains only int's but was created as a varchar and can't be changed to an int at the moment.
Casting column a as a varchar in the ON of the join to left join seems to void the index altogether and the query just runs for every.
We are talking a few hundred million rows of data in each table.
Temp solution is select into a #Hash table as correct data type and index then use the #Hash table in the join.
I need to create a view of a sql table, but change the data types. I knowthe syntax below is not correct, and can't figure out if it is wrong or ifyou just can't do this. I have only created views before with the same datatype.CREATE VIEW F0005New(DRKY nchar(3), DRDL01 nchar(30))INSERT (SELECT rtrim(F0005.DRKY), F0005.DRDL01FROM F0005 AS F0005WHERE DRSY = '41' AND DRRT = 'S1')Thanks!!
View 4 Replies View RelatedHi Can anyone point me to a document somewhere that shows a mapping ofSQL Server 2000 datatypes to C datatypes? I am writing some extendedstored procedures which need to be able to process pretty much anydata type, so I want to make sure I am taking them from SRVPROC andstoring them in the correct C data type.Thanks,Bruce
View 1 Replies View RelatedHi,Can anybody tell me if it is possible to return a table data type (asopposed to a temporary table) from a stored procedure.I am currently studying for 70-229 using the Thomas Moore book but itdoesn't really make it clear, as the text suggests you can't returnthem but some of his sample questions suggest you can.I can't make it work in Query Analyser so I am assuming that you can'treturn them. Is that correct?Thanks in advance for any help,Simon.
View 1 Replies View RelatedIs there ANY data type other than varchar that is valid for localvariables and allows more than 8000 characters?
View 3 Replies View RelatedHi,
I´m building an aplication with VB.net and SQL Server 9, but in the future it will be compatible with PostgreSQL (by another developer), so my question is, if anyone knows what "data types" in SQL Server 9 i must use to maintain compatibility with PostgreSQL, so that when the time come for the conversion i don t have to chage the "Data Types" on each table.
Any help would be apreciated.
Hello All,
We are developing customer support application. We will have so many customers after launching this product. But my problem is how will i store data of all these customers in SQL Server. Please suggest me.
i have created asp.net page, one feild of this page text area.
when i insert some text through this page in "text feild" of SQL server on few words of this feild cut and inserted to text feild of SQL server but all text that i have written in text area feild.
can u please help me how to handle so that i can all text in text feild of SQL server data type text/next.
I have a simple Integration Services project and the problem is that decimal fields are importing as real (I'm loosing the digits behind the decimal point).
The project contains a data flow task importing a flat file (.csv) to an SQL Server destination. My .csv file has two decimal type fields. Example:
Field 1: 12345.67
Field 2: .123456
My database table that I'm importing to has two fields. The only way that I can get this data to import is to define the fields as "float" in both the text file and database table. I want the database table fields to be defined as decimal or numeric, not float:
Field 1: decimal(7,2)
Field 2: decimal(6,6)
When all fields are defined as decimal (in both the flat file and database file), I get the following results:
Field 1: 12345.00
Field 2: .000000
How does one import decimal data from a flat file (.csv)?
Thank you in advance!
I think I may have figured out the solution to my recent conundrum with SQL Server 2000 that had me stressed and depressed over the last couple of days. In a nutshell, after a HotFix was installed on a SQL2K database server I have space on, I was unable to perform INSERT or UPDATE queries on database table of type TEXT, when trying to either create or modify records with more than 4,000 characters of data. While it was frustrating as heck, it seemed too rigid to be random, so I did some snooping.
The HotFix was intended to solve a known problem of not being able to run UPDATEs against TEXT fields, but in so doing, caused another headache entirely: http://support.microsoft.com/?kbid=839523
Apparently this is a semi-known problem, in that a certain HotFix forces SQL Server 2000 to be a lot more stringent in requiring explicit declaration of data types and data lengths for parameters in stored procedure. In my client code, I was initially using the overloaded constructor of the SqlParameter object that took as arguments only the parameter name and a value, without specifying a value from the SQLDBType enumeration or length of the parameter (which in my case, needs to be TEXT and 16 (or 2147483647), respectively):
System.Data.SqlDataAdapter.InsertCommand.Parameters.Add(new SqlParameter("@parameterName",parameterValue);
It appears that after the HotFix is installed, if the client doesn’t syntactically set the type and length of data for a parameter, SQL Server and/or .NET will default to a type of NVARCHAR, which has the 4,000-character limit. This all makes sense. I’m going to now need to modify the code to straight out declare what’s going in the SPROC:
System.Data.SqlDataAdapter.InsertCommand.Parameters.Add(new SqlParameter("@parameterName",SqlDbType.Text);
System.Data.SqlDataAdapter.InsertCommand.Parameters["@parameterName"].Value = parameterValue;
It’s a minor change, and it sucks that I have to make it after the code had worked flawlessly over several thousands executions over several months, but c’est la vie! Better thay than have to rebuild my DB from scratch or switch to a new server. Changing the client code evidently is the only known fix at this time: http://support.microsoft.com/default.aspx?scid=kb%3ben-us%3b827366
I'm currently trying out transactional replication with updatable subscriptions across two 2005 servers.
View 3 Replies View RelatedI need to set the default value of a field in my table to 'Regular' if nothing is inserted to that field. Is it not as easy as putting ('Regular') in Default Value?
View 4 Replies View RelatedHow do you enter a default value where it is a combination of values ?
I want a default value to be entered into a field every time a create a new record.
The field will contain the "primary key number" + username
Cheers
Gary
We have a table that needs to have 00 as the default values in the columns until the point in time where they are updated with the values that we will use. The updated values will be two numbers 1-7 and 3-9 example 47, 14, 26, 68. This is a nvarchar data type in the columns. When I try to set the default values to double zero 00, after i click save it changes them to a single zero 0 instead of a double zero 00.
Miranda
This is the query that I have.
Code Snippet
SELECT * FROM [scholarship]
WHERE ([sectionID] = @schoolID OR @schoolID IS NULL)
AND ([schlrPrefix] LIKE '%' + @scholarship + '%' OR [schlrName] LIKE '%' + @scholarship + '%'
OR [schlrSufix] LIKE '%' + @scholarship + '%' OR [schlrPrefix] + ' ' + [schlrName] LIKE '%' + @scholarship
OR [schlrPrefix] + ' ' + [schlrName] + ' ' + [schlrSufix] LIKE '%' + @scholarship OR @scholarship IS NULL )
AND ([Specification] LIKE '%' + @major + '%' OR @major IS NULL )
AND ([reqr1] LIKE '%' + @requirement + '%' OR [reqr2] LIKE '%' + @requirement + '%' OR [reqr3] LIKE '%' + @requirement + '%' OR [reqr4] LIKE '%' + @requirement + '%' OR [reqr5] LIKE '%' + @requirement + '%' OR @requirement IS NULL )
How do I insert/add a default value in if the query above generates zero result?
I would like to know how to change the default data directory in SQL Server Express. I have a partitioned hard disk with SQL Installed on the C: drive. I would like to move the data to d: drive. I have just installed SQL and do not have any databases. I have installed SQL with advanced services.
Thanks in advance for your response.