Deferred Constraints Sql Server 2005
Sep 12, 2007Is there any way to defer constriants in sql server 2005? I have found some sites that say use the keyword deferred but that always give me an "Incorrect syntax near 'deferred' "error.
View 1 Replies
ADVERTISEMENT
SQL Server 2008 :: How Temp Tables Associated To Deferred Recompilation
May 25, 20151) "Deferred compile" recompile event occurs because of deferred name resolution. In other words, an object referred to in the statement does not exist at compile time. Later, when the object does exist, it requires a recompile of the statement so that it can create an optimal execution plan. One example of when a deferred compile will occur is if a temporary table is used in a batch and does not exist when the first statements in the batch are compiled.
View 2 Replies View RelatedDeferred Name Resolution
Dec 20, 1999In 7.0, an application development change has been made to defer name checking in
stored procedures until exection time. This allows a clean store of the proc in the system catalog
regardless of objects existing or not. At execution time, the proc is compiled, and object resolution is
done. Problem - the procedure fails if object names, column names, etc are wrong or don't exist.
So, during nightly cycle's the procedures bomb out.
Is there anyway to disable this 'deferred name resolution', or am I at the mercy of the developers?
Can I make the resolution immediate?
Thanks!
Dean
UGH! Failed To Enable Constraints. One Or More Rows Contain Values Violating Non-null, Unique, Or Foreign-key Constraints.
Jan 9, 2007I know this is probably a flick of a switch but I cannot figure out which switch. Setup is SQL Server / Stored Procedures / DAL / BLL(skipped for testing) / PL. The stored procedure queries from only one table and two columns are ignored because they are being phased out. I can run the stored procedure and preview the data in the DAL but when I create a page with an ODS linked to the DAL and a GridView I get this error. I checked every column that does not allow nulls and they all have values. I checked unique columns (ID is the only unique and is Identity=Yes in the table definition). I checked foreign-key columns for values that are not in the foreign table and there are none. Any ideas why do I get this?
Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.
Failed To Enable Constraints. One Or More Rows Contain Values Violating Non-null, Unique, Or Foreign-key Constraints.
Jan 17, 2008Hi,
I am getting the above error when trying to load a report into my Web Application, I have tracked the error down to one specific field in my database. Even though this field is a NVarChar field and is of size 30 it would seem that there is an issue returning the value from the field. I can write it into the database no problems but when I try to get it out of the database it returns the above error.
e.g
MOB 401.908.804 - Fails
0401.907.324 - okay
8239 9082 (pager) - fails
Anyone got an idea on how to fix this????
Regards..
Peter.
Deferred Name Resolution & SP Compliation
Oct 4, 2001I would like to be able to turn off the deferred name resolution feature in SQL2000 when compiling stored procedures. Is this possible?
Sidney
The Statement Could Not Be Parsed. Deferred Prepare Could Not Be Completed.
Feb 13, 2008I am trying to use the export wizard to export to a MS Access file, using the provide source query option. I get the error below when pasting the query in. The query does run successfully in SSMS, it is a long running query. About 8 minutes to complete.
TITLE: SQL Server Import and Export Wizard
------------------------------
The statement could not be parsed.
------------------------------
ADDITIONAL INFORMATION:
Deferred prepare could not be completed.
Query timeout expired (Microsoft SQL Native Client)
Any ideas?
michael.bliesner@premera.com
2005 Breaks Sp_rename For Constraints?
Aug 30, 2006
BooksOnline indicates that sp_rename can still be used to rename constraints such as primary keys, foreign keys, defaults, etc. in SQL Server 2005. However, when I try to do so I get this:
"Either the parameter @objname is ambiguous or the claimed @objtype (object) is wrong."
After looking at the code for sp_rename, it looks like this problem might be related to another bit of apparent misbehavior on 2005's part: when I execute "select object_name()" with the Id number of a constraint, it returns the name, but when I execute "select object_id()" with the name of that same constraint, it returns null. Why is that?
Thanks,
Ron
OLE/DB Provider Returned Message: Deferred Prepare Could Not Be Completed
Apr 11, 2006I have 2 SQL servers. And in the first one I have added the second SQL as a Link Server. When I run an SQL statement on the linked server I get the following message.
Server: Msg 7202, Level 11, State 1, Line 1Could not find server 'PROD' in sysservers. Execute sp_addlinkedserver to add the server to sysservers.[OLE/DB provider returned message: Deferred prepare could not be completed.]
The SQL statement that I am runnins is
Select * from openquery(PROD,'Select * from PROD.GMS.dbo.qryDispCL')
But when I run only the SQL statement "Select * from PROD.GMS.dbo.qryDispCL" it works perfect. But I need to have the first statement running.
Please help. Your valuable feedback is greatly appriciated.
SSIS Pacakge Error:'Deferred Prepare Could Not Be Completed'
Aug 4, 2006Hello,
I am trying to use the Import export wizard to created a package,
using the provide source query option. If i just copy the query from a text file
and try to paste , sql only accepts it partially. so i saved it as a sql file
and then opened it in the window. However, when i click on 'next' or 'parse' , i
get the below error.
TITLE: SQL Server Import and Export Wizard
------------------------------
The statement could not be parsed.
------------------------------
ADDITIONAL INFORMATION:
Deferred
prepare could not be completed.
Query timeout expired (Microsoft SQL Native Client)
The query is pretty big, but it executes successfully in the Management Studion Query Explorer window. I had no problem creating a package using DTS with the same query in Sql 2000. I also tried to migrate the package already existing in Sql 2000, but even though i can migrate it successfully , the package does not execute in Sql 2005. Also i tried other queries which are as big as this one, again the query source window during import/export does not seem to accept large queries??? I depend heavily on large queries for my packages, which i run daily. I have not had any issues with this is sql 2000. Can someone help me with this???
Thanks in advance.
Ram
Linked Servers OPENQUERY Error Deferred Prepare Could Not Be Completed
May 13, 2008I am running the following query trying to return server properties across a linked server. I want to store the results in a table on the server where I an running the query.
DECLARE @BuildClrVersionx nvarchar(128)
SET @BuildClrVersionx =
(SELECT *
FROM OPENQUERY(LKMSSQLXYZ01, 'CONVERT(nvarchar(128),SERVERPROPERTY("BuildClrVersion")'))
I am getting the following errors:
OLE DB provider "SQLNCLI" for linked server "LKMSSQLADM01" returned message "Deferred prepare could not be completed.".
Msg 8180, Level 16, State 1, Line 1
Statement(s) could not be prepared.
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'CONVERT'.
If you have any ideas how I can run this query across a linked server I would appreciate it.
Thanks,
Scott
How To Force Deferred Update To Create Two Rows In Change Data Capture
Mar 23, 2015I have located a bug in the functions cdc.fn_cdc_get_net_changes_<capture_instance> generated when you enable cdc on a table. This bug can be triggered if 2 rows are created in the _CT table having the same values for the __$start_lsn, __$seqval and the table's key column(s). From research on the internet I have found such rows can be created by a "deferred update": a single update statement in which a column that is part of a unique constraint is updated.
In order to report the bug with Microsoft I need to create a complete series of steps-to-reproduce. But even though the situation happens several times a day in our production environment, I have not yet been able to reproduce it in my test environment.I need a single update statement (plus maybe some steps in advance) that make that the log reader inserts 2 rows into the _CT table, one with __$operation = 1 (delete) and another with __$operation = 2 (insert) as opposed to the single row with __$operation = 4 that it inserts for a normal update. Below is the script I have so far to create a fresh database, enable cdc, create a test table, insert some data and update this data.
I would have liked the last update statement to be handled as a "deferred update". However in all of my tests the log reader just simply inserts a single row into the cdc.dbo_NETTEST_CT table.how to reproduce the situation where I get the 2 rows with __$operation 1 and 2 from a single update statement instead of the single row with __$operation = 4.
CREATE DATABASE [cdcnet]
CONTAINMENT = NONE
ON PRIMARY
( NAME = N'cdcnet', FILENAME = N'S:SQLDATAcdcnet.mdf' , SIZE = 4096KB , FILEGROWTH = 1024KB )
LOG ON
( NAME = N'cdcnet_log', FILENAME = N'T:SQLLOGcdcnet_log.ldf' , SIZE = 1024KB , FILEGROWTH = 10%)
[code]....
SS 2005 Express- Allowing Null Values And Foriegn Key Constraints
Dec 28, 2006Hello,I have a foreign key constraint between two tables (Appointments andMissedAppointmentReasons) and I'd like to allow null values in Appointmentstable for the field containing the MissedAppointmentReason, but currently, Iget a Foreign Key Constraint Error when I try to add a record to theAppointments table.Any ideas how I can have the null values but still maintain the Foreign KeyConstraint?Thanks!Rick
View 3 Replies View RelatedConstraints In SQL Server
Jan 23, 2004i have a question about constraints in SQL server.
i have three tables:
Client
---------
clientID
name
etc...
Bank
-------
BankID (a virtual number, identity)
ClientID (FK: Client)
BankAccountNumber
BankName
Order
--------
OrderID
ClientID
BankID
a Client an have one or more bankAccounts.. if he place an order, he can select wich bankaccount will be used to pay.
how do i have to set the constraints so that the bankAccount in Order, is allways of THAT client in order.???
Thanx...
SQL Server Constraints
Oct 29, 2007HI I'm newbie in sql server and I am looking how to define a constraint between two tables that are located each in a different schema. I have tried from the Enterprise Manager but without look, could you please help me with this,
thank you
How To View All The Constraints In Sql Server
Feb 2, 2008hi,
how to view all system constraints in sql server..
Table Constraints To XML In SQL-Server 2000
Aug 4, 2006Hi,
I am DB programmer, How can i get Table Constraints to XML in SQL-Server 2000 with out data.
How To Verify Constraints After A Bulk ? (sql Server Destination)
Dec 11, 2006Hello
I have four tables as xml. I'm successfully bulk loading them into 4 tables, using the SQL Server Destination, with check constraints unchecked.
The process manages to load all the data without any FK issue.
After that, how can I check the constraints ? (I've read a bit about is_not_trusted and sys.check_constraints)
Thibaut
SqlDataAdapter / DataSet And SQL Server Side Trigger / Constraints
Apr 23, 2007When updating data using .NET 2.0 SqlDataAdapter and a strong typed dataset, it seems that constraints (foreign key) and trigger are disabled. I'm using a stored procedure to delete rows and calling it from SSMS causes the trigger to fire. Calling it via the SqlDataAdapter not.
Can someone confirm this?
At least here, my triggers don't fire.
How can I enable, that triggers in SQL Server do fire?
Are there differences in this behaviour when using batch updates or not?
TIA,
Hannoman
Integrity Constraint Error On SQL Server Column With No Constraints
Aug 6, 2007I have created a simple package to load an Excel Spreadsheet into a SQL Server table. There is a one to one relationship between the columns in the .xls file and the columns in the DB record. I am getting integrity constraint errors when I try to load all numeric data from the spreadsheet (defined as Category General in excel, not defined as numeric but consisting of all numeric characters) into a column defined as (nvarchar(20), not null) in SQL Server Management Studio. There are no constraints on the column.
I have been able to temporarily bypass the offending rows, but I do need to load them into SQL Server. The problem column has a mixture of data, two examples would be: N255, 168050. It's the 168050 value that's causing the Task to bomb. How can I get this loaded into my table ?
I am running the package from within MS Visual Studio 2005 Version 8, Excel is version 2003 (11.8120.8122) SP2
Thanks,
Chris
How To Trap The Results Of Constraints In SQL Server 2005from Visual Studio C# Code?
Jul 2, 2007Hi all,
Suppose I have set a CHECK constraint to a column where Salary field is not permitted to be less than 1000 or greater than 10000.
In this situation, when I insert a new record with salary as 10, using a stored procedure from Visual Studio, how will I trap the error from C# Code?
Thanks
Tomy
SQL Server 2008 :: Violation Of Primary Key Constraints - Cannot Insert A Duplicate Key In Object
Sep 8, 2013I have table variable in which I am inserting data from sql server database. I have made one of the columns called repaidID a primary key so that a clustered index will be created on the table variable. When I run the stored procedure used to insert the data. I have this error message; Violation of Primary key Constraint. Cannot insert duplicate primary key in object. The value that is causing this error is (128503).
I have queried the repaidid 128503 in the database to see if it is a duplicate but could not find any duplicate. The repaidID is a unique id normally use by my company and does not have duplicates.
SQL Server 2014 :: Find Common Link Between Two Tables In Database Without Key Constraints
Jul 16, 2015Any tool, script, procedure, or otherwise that will solve this problem?
CREATE TABLE [Table 1] (
Id varchar,
TableTwoId varchar,
OtherData varchar )
CREATE TABLE [Table 2] (
Id varchar,
MoreData varchar )
What is the link between these two tables?
I have databases that have zero keys defined, no foreign key constraints, no unique value constraints. I cannot assume that an Identity column is the Id. The end game is be able to output that [Table 1].[TableTwoId] = [Table 2].[Id] but cannot assume that all linkage in the database will be as simple as saying "if the field name contains a table name + Id then it is the Id in that table."
Currently have written a script that will cycle through all columns and start identifying keys in singular tables based on the distinctness of the values in each column (i.e. Column1 is 99% distinct so is the unique value). It will also combine columns if the linkage is the combination of one or more columns from Table 1 = the same number of columns in Table 2. This takes a long time, and it somewhat unreliable as IDENTITY columns may seem to relate to one another when they don't.
SQL Server 2012 :: Find Common Link Between Two Tables In Database Without Key Constraints?
Jul 17, 2015CREATE TABLE [Table 1] (
Id varchar,
TableTwoId varchar,
OtherData varchar )
CREATE TABLE [Table 2] (
Id varchar,
MoreData varchar )
What is the link between these two tables?
I have databases that have zero keys defined, no foreign key constraints, no unique value constraints. I cannot assume that an Identity column is the Id. The end game is be able to output that [Table 1].[TableTwoId] = [Table 2].[Id] but cannot assume that all linkage in the database will be as simple as saying "if the field name contains a table name + Id then it is the Id in that table."
Currently have written a script that will cycle through all columns and start identifying keys in singular tables based on the distinctness of the values in each column (i.e. Column1 is 99% distinct so is the unique value). It will also combine columns if the linkage is the combination of one or more columns from Table 1 = the same number of columns in Table 2. This takes a long time, and it somewhat unreliable as IDENTITY columns may seem to relate to one another when they don't.
SQL Server 2008 :: When Renaming A Table / It Doesn't Rename Foreign Key Constraints
Sep 21, 2015I'm working on creating a new version of an existing table. I want to keep the old table around, only with a different name. In looking this up I found there's a system routine named sp_rename, which looks like it will work fine.However in thinking about this I realized that the foreign key constraints defined on the table (there's 3 of them) are likely to not be renamed, correct?
If I'm correct, then I suppose I could rename the table, then drop the 3 foreign key constraints, and create them new using different names for those foreign key constraints.
Reporting Services :: Copy Table From One To Another Server With Primary And Foreign Key Constraints
Jun 9, 2015How to copy a table from one server to another server with primary and foreign key constraints.
View 5 Replies View RelatedSSIS Task Transfer SQL Server Objects Task And Default Constraints On Tables
Feb 21, 2008
I am using the "Transfer SQL Server Objects Task" to copy some tables from database A to database B including data.
The tables, primary key constraints, Foreign key, data and all transfers nicely except for "DEFAULT CONSTRAINTS" on the tables.
I have failed to find any option in the "Transfer SQL Server Objects Task" task to explicitly say "copy default constraints". So I guess logically it should happen automatically but it doesn't. I hope it is not a bug :-)
Any option anyone knows will help.
Thanks.
How Do You Do Constraints
Oct 15, 2006I'm using MS SQL 2000 with enterprise manager I have a customers table called high_customer, it has a primary key called IDI have an invoices table called high_invoices, it has no primary keys but it does have a column for customer ID.I want to set it so if a customer is deleted from the customers table, any invoices with that customerID are deleted from the invoices table.Do I need to specify a constraint? If so how do I do it in enterprise manager.Thanks
View 1 Replies View RelatedConstraints
Apr 27, 2005Hi,
I have the following problem:
I have a table called Jobs with the fields:
JobNumber, Name, Customer, ...
And a table called Customers with the fields:
ID, Name, Address, ...
Obviously Jobs is linked to Customers with the Customer<->ID fields. I want to set it up so that if a Customer is deleted, then any Jobs that had that customer listed now have the Customer field set to NULL. Can I do this with a constraint, or will I need to use a trigger?
Cheers,Little'un
Constraints
Feb 27, 2001Hello,
I am not a DBA and I need to do the following.
I have 2 tables A and C and both have a common fileds say emp.Emp is pkey in C .
There can be a record in C but not in A.If a record is inserted in A then it checks for the same employee info in C .If not found it do not allow to insert a record in A.
How to go for it?
Thanks!
Constraints
Feb 5, 2004Hiya peops!!
Listen i was wondering if anyone could tell me whether they know the correct syntax for creating constraints or where i could find it on the net???
Thanks
Constraints
Feb 5, 2004Hiya peops
im creating a constraint using enterprise manager for 1 of my tables n was wondering how u constructively create a constraint expression, there is a specific style,right??
Thanks
Constraints
Nov 20, 2007hi there,
i have added my tables and defined foreig keys and primary keys for my table, but when i try to put the data it gives me some error reagards to parent key..and it wont let me drop the table... can anybody tell me how to drop the foregin key..i have tried (
ALTER TABLE module DROP CONSTRAINT ATTENDANCEID_FK;)
this formula and it wont work,
heres my tables and relationships:
CREATE TABLE ATTENDANCE
(ATTENDANCEID char(4) NOT NULL,
StudID char(4) NOT NULL,
ModuleID char(4) NOT NULL,
Week1 VARCHAR(10),
Week2 VARCHAR(10),
Week3 VARCHAR(10),
Week4 VARCHAR(10),
Week5 VARCHAR(10),
Week6 VARCHAR(10),
PRIMARY KEY (ATTENDANCEID));
ALTER TABLE ATTENDANCE
ADD FOREIGN KEY (studID) REFERENCES student(studID);
ALTER TABLE ATTENDANCE
FOREIGN KEY (moduleID) REFERENCES module(moduleID));
insert into ATTENDANCE values
('F1','A1','E1','Yes','Yes','Yes','Yes','Yes','Yes');
insert into ATTENDANCE values
('F2','A2','E2','Yes','No','Yes','Yes','No','Yes');
insert into ATTENDANCE values
('F3','A3','E2','Yes','Yes','Yes','No','Yes','Yes');
insert into ATTENDANCE values
('F4','A4','E2','Yes','Yes','Yes','Yes','No','Yes');
insert into ATTENDANCE values
('F5','A5','E1''Yes','Yes','No','Yes','Yes','Yes');
insert into ATTENDANCE values
('F6','A6','E2','Yes','Yes','Yes','Yes','Yes','No');
insert into ATTENDANCE values
('F7','A7','E1','Yes','Yes','Yes','Yes','No','No');
insert into ATTENDANCE values
('F8','A8','E2','Yes','Yes','Yes','No','Yes','Yes');
insert into ATTENDANCE values
('F9','A9','E3','Yes','Yes','No','Yes','Yes','Yes');
CREATE TABLE MODULE
(ModuleID char(4) NOT NULL,
ATTENDANCEID char(4) NOT NULL,
ModuleName varchar(45),
ModuleCode varchar(6),
PRIMARY KEY (ModuleID));
ALTER TABLE MODULE
ADD FOREIGN KEY (attendanceID) REFERENCES attendance(attendanceID);
insert into MODULE values
('E1','F1','Workshop Research and Project Implementation','Im3023');
insert into MODULE values
('E2','F2','Advanced Database Development','SD3042');
insert into MODULE values
('E3','F3','Advacned Information Systems Develpment','SD3043');
charles