Delete Blank Row In Flat File Destination From Conditional Split
May 21, 2008
Hello everybody
I have one question about deleting blank row on flat file destination from conditional split.
I create an SSIS package to filter data from Flat file source.
On flat file source, it is Ragged right format and header row delimeter in {CR}{LF}
the coulums are devided manulaay using markers.
I use only 2 columns divided and send the source into conditional split task and the conditions are given to filter data,
when the output from conditional split is placed on flat file destination, i notice blank rows on the output. I want to delete the blank rows so the result data can be displayed continuously in rows.
anybody has any idea for this? I know the script task will work but hope to avoid to use script task.
I have a Problem with my destinations. I have a split condition with two ways the flow can use.
In this case: all and Date.
All and Date can be set by using a variable. Its working good.
When a user fills the variable with a date value (cast to string) the conditional split executes the correct flow with all the needed rows... The same time the all flow will be executed with 0 rows. In the end the destionation file for the all values will be overwritten with nothing. The same on the other hand when a user fills the variable with the all value, the date file is empty. What can i do to make sure that the files are not empty?
I am testing SSIS and have created a Flat File Destination. I defined the Flat File Connection as New for the first time and it worked fine. Now, I would like to go back and modify the Flat File Connection in the Flat File Destination Editor, but it allows only to create a New connection rather allowing me to edit the existing one. For testing, I can go back and create a new connection, but if my connection had 50-100 columns then it would be an issue to re-create it from scratch.
I am transferring data from an OLEDB source to a Flat File Destination and I want the column width for all of the output columns to 30 (max width amongst the columns selected), but that is not refected in the Fixed Width Flat File that got created. The outputcolumnwidth seems to be the same as the inputcolumnwidth. Is there any other setting that I am possibly missing or is this a possible defect?
I m using SSIS and i am transfering the data from Flat File Source to the OLE DB destination File. The source file contain some corrupt data which i am transfering to the other Flat file destination file.
Debugging is succesful but i am not getting any error output in the Flat file destination file.
i had done exactly which is written in the msdn tutorial of SSIS.
Plz tell me why i am not getting the error output in the destination flat file?
I know this should be simple but I can't figure it out. I am reading in a csv file to a conditional split task, all I want to do is split the file based on a field. Some values in field will have a suffix say ABCD while others wont. So my conditional split says Right(FieldA,4)=="ABCD" which then splits file in two directions or at least it's meant to. Problem is that it does not work. I think it has something to do with the field type in the csv file although I have tried using a Data Conversion task but to no avail all the field values with ABCD suffix are ignored by my conditional split and head off the same way as other values. Funny thing is is that if I manually add a value to the file with a suffix of ABCD and run task again then the conditional split works on the manually added row and all rows with suffix of ABCD. It's like it does not recognise previous values as string until one is added manually.
I have created a Script Component in my Data Flow that basically reads records from an SQL Table and outputs 3 rows for each input row. My problem is that the Script is outputing a blank row at the beginning of the file. I have requested no headers for the delimited file. I know it is the script because my data viewer from the table doesn't show this additional line where the data viewer from my script and the file has the additional blank line. Any help would be greatly appreciated
Need to know how I can get the dynamic filename created in the FlatFile destination for insert into a package audit table?
Scenario: Have created a package that successfully outputs Dynamiclly named flat files { Format: C:Test’Comms_File_’ + ‘User::FileNumber’+’_’+Date +’.txt’
E.g.: Comms_File_1_20150724.txt, Comms_File_2_20150724.txt etc} using Foreach Loop Container :
* Enumerator Set to: “Foreach ADO Enumerator” with the ADO object source variable selected to identify how many total loop iterations there are i.e. Let’s say 4 thus 4 files to be created
*Variable Mappings : added the User::FileNumber – indicates which file number current loop iteration is i.e. 1,2,3,4
For the DataFlow task have a OLDBSource and a FlatFile Destination where Flat File ConnectionString is set up as:
I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me error " cannot open data file" ...
1. Flat File Source 2. Conditional Split, Case Good = !ISNULL(KEY) Case Error = ISNULL(KEY) 3. Case Good -> Writes to Good Flat File (with timestamp in the title) 4. Case Error -> Writes to Error Flat File (with timestamp in the title)
Most job runs have no errors but the error file is created as a zero byte file anyway. If there are no error records I don't want the error file created. How might I accomplish this?
In SSIS flat file import using fastload, I'm trying to import data into SQL 2005 previously created tables.
The table may contain column that are NULLable BUT there is NO DEFAULT for them.
If the incoming data from flat files contains nothing either between the delimeters, how can I have a NULL value inserted in the column instead of blank/empty string?
I didn't find an easy flag unless I'm doing something wrong. I know of at least two ways to do it the hard way:
1- set the DEFAULT(NULL) for EVERY column that needs this behaviour
2-set up some Derived Column option in the package to return NULL if the value is missing.
Both of the above are time consuming since I'm dealing with many tables. Is there a quick option to default the value to NULL WHEN there is NO data ELSE insert the data itself? So the same behavior that I have right now except that I want NULL in place of empty string/blank in the varchar(x) columns.
I am using SSIS to create a weekly data extraction that will be emailed to an external agency. I can extract the data, create the file and email it without any problems but I want to compress and encrypt it before I send to give some measure of protection to sensitive data it would contain.
If I did this manually, I would simply use Winzip to compress and encrypt the file to be sent. How can I achieve a similar result programtically?
I have created a package and when i was trying to configure a flat file destination, i am getting the following error:
===================================
The component could not be added to the Data Flow task. Could not initialize the component. There is a potential problem in the ProvideComponentProperties method. (Microsoft Visual Studio)
===================================
Error at Extract Test Flat File [DTS.Pipeline]: The module containing "component "" (245)" cannot be located, even though it is registered.
===================================
Exception from HRESULT: 0xC0048021 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------ Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ProvideComponentProperties() at Microsoft.DataTransformationServices.Design.PipelineTaskDesigner.AddNewComponent(String clsid, Boolean throwOnError)
Say I am going to write to a different Flat File for every product. So if there are 10 products in the data. There should be 10 Flat Files. Also the file name should include the Product Name And Product ID.
It is being done in a single Data Flow Task.
Right now the Property Expression for the File Name is which is not working)
i am trying to load almost 15 csv files to my oledb destination can i use for each container to map the source columns dynamically to destination table during data flow task
I have a database app, and we're implementing various data export features using SSIS.
Basically, it's a couple of straight extracts of various recordsets/views, etc. to CSV (flat files) from our SQL Server 2005 database, so I'm creating an SSIS package for each of these datasets.
So far, so good, but my problem comes here: My requirements call for users to select from a list of available columns the fields that they want to include in their exported file. Then, the package should run, but only output the columns specified by the user.
Does anyone have any idea as to the best way to accomplish this? To recap, at design time, I know which columns the users will have to choose from, but at run time, they will specify the columns to export to the flat file.
Dynamically load a flat file from a dynamic source table-
The source table metadata is known via the SYSOBJECTS and SYSCOLUMNS tables- I can pull the column names, type and lengths from these tables based on the table name. (my goal is pretty simple- pull data from a table in our database, and save it down to a flat file)
Would this be enough to dynamically create the destination flat file? If so, how do I do it?
I have a dataflow task with two components: OLE DB source --> Flat File destination
In the OLE DB source, I am accessing a view, not a table.
However, when I attempt to map the view's input columns to the flat file destination columns, the screen is completely blank. There's none of the usual drop downs that let you select the column name, nor can I drag and drop the input column from the upper pane to the lower pane.
Attempting to write to a flat file, I get the following Warning then Errors:
~~~~~~~~~~~~~~~~~~ Warning: 0x80070005 at Data Flow Task, Detail to dat File Writer [54]: Access is denied.
Error: 0xC020200E at Data Flow Task, Detail to dat File Writer [54]: Cannot open the datafile "DetailOutWhat_1.dat".
Error: 0xC004701A at Data Flow Task, DTS.Pipeline: component "Detail to dat File Writer" (54) failed the pre-execute phase and returned error code 0xC020200E. ~~~~~~~~~~~~~~~~~~~
There should be no reason that this project can't open DetailOutWhat_1.dat, as it has successfully done it earlier today...
UNRELATED: Is it possible to comment out a transform or destination file while in the Designer View?
Currently we're working on an SSIS package to extract data from a SQL Server database to several fixed width flat files.
Some of the data needs to be formatted/converted in a certain way DateTimes need to be formatted in ISO8601Booleans need to be 0/1 instead of False/True...Has anybody any idea what the preferred approach (best practice) would be to do these conversions?Convert everything in the select query? What about readability of your query? Do it somewhere in the package? If so, how?....
I am trying to use a conditional split task so that I can check for specific fields. If the value doesn't exist I am piping the records to a derived field task, where I add an error. I then try to send these records to a flat file destination so that I can keep track of them. However, when I execute the SSIS data flow task I get the following error
[Log Invalid Records [5496]] Warning: The process cannot access the file because it is being used by another process.
This file isn't being used by any other process as far as I can tell, and the only process using it is the SSIS task trying to write to it.
If anyone has any ideas, then I would really really appreciate it
Hello Everyone, Please do inform me, how can I check if there is a new record or changed record from the source.
NOTE: my source is Flat File and destination is Oracle Table.
What is needed from my side is the history load (Type 2). This is not possible thru SCD component in Integration Services, If my source is Oracle (Even after I had added the parameters in my OLE DB) Please do inform me about this process. Very important.
I'm unable to figure out how to write a column header to my flat file destination. My source is a OLE DB SQL query and I need the column names as a header row in my text file destination. This seems easy but the closet I can find is hardcoding the column header row in the header property. Is this the only option?
I need to create a number of flat files, all with the same layout and sourced from the the same table, but with different criteria.
The first set of (three) flat files file is created out of a simple Conditional Split transformation: If Source Table row number > 40,000 route to File 3; if row number > 20,000, route to file 2, otherwise route to file 1. This gives me 20,000 rows in files 1 & 2 and the remainder in file 3.
I also want to create a fourth flat file by joining the Source Table with a sample table and selecting only those rows where the Customer numbers match. I'm currently doing this in two stages: An Execute SQL Task performs the join and inserts the selected rows into a Destination table (identical layout to source table), and then a simple data flow moves the rows from the Destination table into the fourth flat file.
My problem is that the order of the columns in the first three flat files is different from the fourth file. I've tried creating the fourth flat file with a single data flow using a Merge Join transformation which didn't work because the tables aren't sorted in the correct sequence, and I couldn't get an OLE DB Command transformation to work either.
I'm not sure why the column order of the 4th file should be different seeing as how its contents are sourced from the same Source table, but is there a cunning way of setting this up so that the columns end up in the same order?
I am using a data flow task, and outputting the results from the ole db source adapter to a flat file by calling a function. That part works fine.
However, I want the text fields to be surrounded by double-quotes, like so:
"data1", "data2", "data3"
However, what I'm getting is:
"data1 ","data2 ","data3 "
I tried both specifying a "text qualifier" and when that didn't work, I removed the text qualifier and put quotes around the columns in my select statement. But that didn't work either.
Now, i have a SQL Server database called "EmployeeDB" which has 2 tables "TblEmp1", "TblEmp2". The Table is like this.
TblEmp1 : Columns EmpName EmpDept EmpjoinDate
TblEmp2 : Columns EName EDate Edept
using integration services (SSIS) i need code(vb.net or c#) to Create a dtsx package so that i can push the flat file content to these 2 tables. And the condition is :
After Executing the package Data loaded in TblEmp1 should be like this
Now, i know that we need to do like this in wizard 1) Create a flat file source component. 2) Create flat file connection and set the properties of flat file (delimeters and other things) 3) Create a Multicast Component. 4) Create a Path between Flat file source and Multicast. 5) Create 2 destination component(each for a table). 6) Create path from multicast to 2 destination components 7) Create a OledbConnection and set table names for 2 destination components.. 7) Now,i have to do mapping for destination1.8) Now, i have to do mapping for destination2( this mapping will be different from mapping done for destination1 because iam not inserting the data in the same order in which iam doing for TBLEmp1.
I have done it in wizard.I need to do it through code and i know that its not complicated.Please find the attached file with this mail.i have attached a screen shot of how i have done in wizard.The main problem is Mapping differently for 2 destinations from source.for 1st one we can have a forloop for mapping.but for 2nd one iam confused!!
I have a flat file destination that Im sending data to, from an OLE DB data source. There are two records, but for some reason they are both going on the same line in the output. This is after setting the output to fixed width, from comma delimited.
I am struck at one point. I am trying to this operation and not able to go further.
1. I have got the dataset to a variable in the control flow.
2. I am looping through the dataset based on a coloumn.
3. Now inside my For each loop i have a dataflow task.
4. In the data flow task i am trying to build a dynamic query using the OLEDB Source and i have selected SQL Command from variable. And the variable build the Query as select * from @othervariable.
Now my question is
Can i send the data of each of the Query resultset to an out put text file using Flat File Connection? If yes pls guide me how? I have tried to create a flat file connection but i am failing how to map the data comming from step 4 dynamically for every query, since every query gives you a different resultset with different coloumns.
I have 3 packages that run consecutively in a main package. Each of these packages read data from a flat file and import it into the Database and then perform some updates and then I use a script component to write the data to a flat file destination and have overwrite flag on the flat file destination to false, however the flat file is not being appended to. All the 3 packages are set to wirte to the same flat file destination each package overwrites the content of the flat file created by the previous packages.
I am wondering why the overwrite = False does not work on the flat file destination. Is there something else that I need to set or is this a defect? Any inputs will be much appreciated.
