Greetings!
Need some assistance to:
Delete records from a table; keying off of a colum (expire date) thats data-type is datetime.
I would like to use command getdate less 2 years. So - I want to delete all records from a table where the expire date is 2 years older than the current date.
Appreciate the help!
roscoeLL9
I have two tables that are related by keys. For instance,Table employee {last_name char(40) not null,first_name char(40) not null,department_name char(40) not null,age int not null,...}Employee table has a primary key (combination of last_name and first_name).Table address {last_name char(40) not null,first_name char(40) not null,street char(200) not null,city char(100) not null,...}Address table has a primary key (combination of last_name, first_name andstreet in which (last_name, first_name) reference (last_name, first_name) inemployee table.Now I want to delete some rows in Address table based on department_name inEmployee table. What is sql for this delete?I appreciate your help. Please ignore table design and I just use it for myproblem illustration.Jim
View 1 Replies View RelatedI have this table:
with actividades_secundarias as (
select a.*, r.Antigo, r.Novo, rn = row_number()
over (PARTITION BY a.nif_antigo, r.novo ORDER BY a.nif_antigo)
from ACT_SECUNDARIAS a inner join
((select
[Code] ....
I want to make a delete statement like this:
select * into #table1 from actvidades_secundarias where rn>1
Delete from act_secundarias where act_secundarias.nif_antigo = #table1.nif_antigo and act_secundarias.cod_cae = #table1.cod_cae
But it seems that I cant delete like this.
I am getting runtime error for the below simple execution of sp even I tried casting the @dt to varchar still getting the same error. I want to delete the table based on the 2 parameter ...
1. Table Name first parameter
2. InCondition is the column name which of type datetime
CREATE PROCEDURE dbo.[DeleteTable](@InTblName NVARCHAR(250),@InCondition NVARCHAR(250))
AS
BEGIN
DECLARE @DeleteSQL NVARCHAR(250)
DECLARE @Dt DATETIME
SET @Dt = GETDATE()
SELECT @DeleteSQL = N'DELETE FROM ' + @InTblName +' WHERE '+@InCondition+ '=''' + @Dt+ ''''
SELECT(@DeleteSQL)
EXECUTE sp_executesql @DeleteSQL
END
I have corrected the code now, I am not getting the output it is throwing error at run time.
EXEC [DeleteTable] 'TABLE_NAME','COLUMN_NAME'
Where column_name is of datatype datetime
Msg 241, Level 16, State 1, Procedure spDeleteTable, Line 8
Conversion failed when converting date and/or time from character string.
Assuming I have a table similar to the following:
Auto_ID Account_ID Account_Name Account_Contact Priority
1 3453463 Tire Co Doug 1
2 4363763 Computers Inc Sam 1
3 7857433 Safety First Heather 1
4 2326743 Car Dept Clark 1
5 2342567 Sales Force Amy 1
6 4363763 Computers Inc Jamie 2
7 2326743 Car Dept Jenn 2
I'm trying to delete all duplicate Account_IDs, but only for the highest priority (in this case it would be the lowest number).
I know the following would delete duplicate Account_IDs:
DELETE FROM staging_account
WHERE auto_id NOT IN
(SELECT MAX(auto_id)
FROM staging_account
GROUP BY account_id)
The problem is this doesn't take into account the priority; in the above example I would want to keep auto_ids 2 and 4 because they have a higher priority (1) than auto_ids 6 and 7 (priority 2).
How can I take priority into account and still remove duplicates in this scenario?
lets say i have 100 employees on Table A and I have 10 employees on Table B. I want to delete all the employees in Table A that are in Table B. Delete From TableA Where EmpNum = (Select EmpNum From TableB)The above SQL wont work but i am looking for something similar. any ideas?
View 1 Replies View RelatedHi All,I have a table in SQL Server 2000 that contains several million memberids. Some of these member ids are duplicated in the table, and eachrecord is tagged with a 1 or a 2 in [recsrc] to indicate where theycame from.I want to remove all member ids records from the table that have arecsrc of 1 where the same member id also exists in the table with arecsrc of 2.So, if the member id has a recsrc of 1, and no other record exists inthe table with the same member id and a recsrc of 2, I want it leftuntouched.So, in a theortetical dataset of member id and recsrc:0001, 10002, 20001, 20003, 10004, 2I am looking to only delete the first record, because it has a recsrcof 1 and there is another record in the table with the same member idand a recsrc of 2.I'd very much appreciate it if someone could help me achieve this!Much warmth,Murray
View 3 Replies View RelatedHi seniors
there are two tables involve in replication let say table1 and replicated table is also rep.table1.
we are not deleting records physically in table1 so only a bit in table1 has true when u want to delete a record but the strange thing is that replication agaent report that this is hard delete operation on table1 so download and report hard delete operation and delete the record in replicated table which is very crucial.
plz let me know where am i wrong and how i put it into right way.
there is no triggers on published tables and noother trigger is created on published table.
regards
Ahmad Drshen
I'm trying to work on an Integration Services project, and want to have a table copied into another table, but this destination table needs a datetimestamp in the name, like tbl061708547pm.
I can get this to work, but if I try to use it with an into statement and a "+", I get an error telling me something is wrong around the "+":
DECLARE @Date char(23)SET @Date = 'myTBL_' + CONVERT(char(23), GETDATE(), 14)SELECT colA, @Date FROM myTBL
*****Error with:DECLARE @Date char(23)SET @Date = 'myTBL_' + CONVERT(char(23), GETDATE(), 14)SELECT * into @Date FROM myTBL
...and error with:DECLARE @Date char(23)SET @Date = CONVERT(char(23), GETDATE(), 14)SELECT * into 'myTBL_ + @Date FROM myTBL;
I'm trying to work on an Integration Services project, and want to have a table copied into another table, but this destination table needs a datetimestamp in the name, like tbl061708547pm.
I can get this to work, but if I try to use it with an into statement and a "+", I get an error telling me something is wrong around the "+":
DECLARE @Date char(23)
SET @Date = 'myTBL_' + CONVERT(char(23), GETDATE(), 14)
SELECT colA, @Date FROM myTBL
*****
Error with:
DECLARE @Date char(23)
SET @Date = 'myTBL_' + CONVERT(char(23), GETDATE(), 14)
SELECT * into @Date FROM myTBL
...and error with:
DECLARE @Date char(23)
SET @Date = CONVERT(char(23), GETDATE(), 14)
SELECT * into 'myTBL_ + @Date FROM myTBL;
Hello
I want to delete my record after ten days of the Posted date(field)..how do I do it? I'm able to insert date(short date , long time) to the database. I'm using sql server and C#. this is what I have so far.I would appreciate your help..
Thanks!!!<%@ Page Language="C#"%>
<%@ Import Namespace="System.Data.SqlClient" %>
<script runat=server>
void Page_Load(Object sender , EventArgs e)
{
SqlConnection conPubs;
string strDelete;
SqlCommand cmdDelete;
conPubs = new SqlConnection( @"Server=localhost;Integrated Security=SSPI;database=Book" );
strDelete = "Delete tblbook Where Posted_Date =???????????";
cmdDelete = new SqlCommand( strDelete, conPubs );
conPubs.Open();
cmdDelete.ExecuteNonQuery();
conPubs.Close();
Response.Write("Records Deleted!");
}
</script>
//
</script>
<html>
<head>
</head>
<body>
<form runat="server">
<!-- Insert content here -->
</form>
</body>
</html>
Hi,
I want to delete all files in a folder where creation date is an year older. I created a For Each Loop container to go over the whole folder and then execute the following Script Task
Dim FileArchive As Int16
Dim dteArchive As Date
Dim FilePath As String
FileArchive = CType(Dts.Variables("FileArchive").Value, Int16) ' One Year FileArchive = 365
dteArchive = DateAdd("d", -FileArchive, Now.Date)
FilePath = Dts.Variables("FilePath").Value.ToString
If File.GetCreationTime(FilePath) <= dteArchive Then
Try
File.Delete(FilePath)
Catch ex As Exception
'Do Nothing
End Try
End If
Dts.TaskResult = Dts.Results.Success
Is there a better approach to this? As most of the time job may have to delete 10 or 15 files but he has to read each file and then check the date if it matches the criteria and it delete.
i have a query
select * from table where orderdate = getdate()-1
I get no result
when i do select * from table where orderdate = '5/31/2007'
i get 208 rows returned. is there a way to get it using getdate()-1
so that i can use it in a procedure. i know i am doing something wrong.
Ashley Rhodes
Hello:
Need some serious help with this one...
Background:
Am working on completing an ORM that can not only handles CRUD actions -- but that can also updates the structure of a table transparently when the class defs change. Reason for this is that I can't get the SQL scripts that would work for updating a software on SqlServer to be portable to other DBMS systems. Doing it by code, rather than SQL batch has a chance of making cross-platform, updateable, software...
Anyway, because it needs to be cross-DBMS capable, the constraints are that the system used must work for the lowest common denominator....ie, a 'recipe' of steps that will work on all DBMS's.
The Problem:
There might be simpler ways to do this with SqlServer (all ears :-) - just in case I can't make it cross platform right now) but, with simplistic DBMS's (SqlLite, etc) there is no way to ALTER table once formed: one has to COPY the Table to a new TMP name, adding a Column in the process, then delete the original, then rename the TMP to the original name.
This appears possible in SqlServer too --...as long as there are no CASCADE operations.
Truncate table doesn't seem to be the solution, nor drop, as they all seem to trigger a Cascade delete in the Foreign Table.
So -- please correct me if I am wrong here -- it appears that the operations would be
along the lines of:
a) Remove the Foreign Key references
b) Copy the table structure, and make a new temp table, adding the column
c) Copy the data over
d) Add the FK relations, that used to be in the first table, to the new table
e) Delete the original
f) Done?
The questions are:
a) How does one alter a table to REMOVE the Foreign Key References part, if it has no 'name'.
b) Anyone know of a good clean way to get, and save these constraints to reapply them to the new table. Hopefully with some cross platform ADO.NET solution? GetSchema etc appears to me to be very dbms dependant?
c) ANY and all tips on things I might run into later that I have not mentioned, are also greatly appreciated.
Thanks!
Sky
I'm trying to clean up a database design and I'm in a situation to where two tables need a FK but since it didn't exist before there are orphaned records.
Tables are:
Brokers and it's PK is BID
The 2nd table is Broker_Rates which also has a BID table.
I'm trying to figure out a t-sql statement that will parse through all the recrods in the Broker_Rates table and delete the record if there isn't a match for the BID record in the brokers table.
I know this isn't correct syntax but should hopefully clear up what I'm asking
DELETE FROM Broker_Rates
WHERE (Broker_Rates.BID <> Broker.BID)
Thanks
Please i need an exmple of ur solution, thanks :)
I'm using some files to show certain pages on certain date for an example
File name : aa.doc
start date: 10/02/00
end date : 10/03/00
But it expires on 10/02/00, here is the strored procedure:
Before the date comes, it expires the page
Here is my stored procedure:
"
SELECT startdate, enddate,archivedate
and (startdate is null or (getdate() >= startdate and getdate() <= enddate))
and (archivedate is null or (getdate() <= archivedate))
group by startdate, enddate order by startdate desc "
Thankx a lot
I have a MS SQL table with a derived column, for date the records were imported, and need to delete records, based on the content of this column. What I need to do is delete all records from the table with a date of '2011-11-18'. Now this column is a datetime column, so it contains the time info after the date, i.e. 2011-11-18 09:29:38.000, but no matter what command I try for this:
-Delete from table where Date_Imported like '2011-11-18%'
-Delete from table where Date_Imported like '2011-11-18'
-Delete from table where Date_Imported = 2011-11-18
It comes back saying "0 rows affected", even though I know there are records with that date in the table.
I have written a merge Statement where i am facing trouble to delete the data basing on Where Clause Condition.
1) Case 1 : For example i have inserted Data from Source to Target based on Date Key Condition.Take an Instance 10 Records Inserted.
2) Case 2 : For example some changes in the records and it has been updated through the Merge Statement .
3) Case 3 : For the Same Date key based on Conditions now three records has came and need to be inserted and rest should be deleted for that Date Key.
How i need to proceed on this before 10 records are not getting deleted and new records adding for that one
My Example Code :
MERGE INTO TargetTable AS Target
USING (
SELECT DISTINCT Col1,
Col2
FROM Table1 AS cga
)
ON dad.AnchorDate = CASE
[Code] ....
I'm kinda embarrased, it's been quite awhile since I've played with SQL or Access but here's my brain fart. I need to open an access DB by the name of eHomes. Inside there are two tables AD_IMAGE & PROPERTY. Property is the main table and stores most of the info. It has a field in it called AD_ID and others except for the image file name. The AD_IMAGE table just keeps the image file name and has 3 fields: ID - AD_ID - & Image1. The problem is when the ad is deleted from the property table the AD_IMAGE table record referring to the PROPERTY.AD_ID doen't get deleted. So, I just want the AD_IMAGE table cleaned up to match what's active in the PROPERTY table using the common AD_ID fields in both tables.
Thanks
Hi,
I have the following scenario :
CustomerDetail
customerid
customername
status
app_no
[status = 0 means customer virtually deleted]
CustomerArchive
archiveno [autoincrement]
customerid
customername
status
At the end of the month, I have to physically delete customers. I have written two stored procs:
proc1
create proc spoc_startdeletion
as
declare @app_no int
select @app_no = (select app_no from customerdetail where status=0)
EXEC spoc_insertcustomerarchive @app_no
-- After transferrin, physically delete
delete from customerdetail where status=0
proc2
create proc spoc_insertcustomerarchive
@app_no int
as
insert into customerarchive(customerid,customername,status)
select customerid,customername,status from customerdetail where app_no = @app_no
It works fine if there is only one row with status=0, however the problem is that when there are multiple rows in customerdetail with status=0, it returns 'Subquery returned more than one value'
How can i transfer multiple rows one by one from the customerdetail to customerarchive and then delete the rows once they are transferred.
Vidkshi
create table #sample
(
Name varchar(100),
value int
[code]....
From that I wanted to delete some records based on following condition. randomly select any number of records but sum(value) = 125 and name = xxx
DELETE FROM Report_temp2
WHERE MSSalesID in
( Select Report_temp.MSSalesID FROM Report_temp)
DELETE FROM Report_temp
WHEREMSDate < '2015-07-01'
Actually the year stating form july.
Q1 is july,aug,sep.
Q2 is oct nov,dec.
Q3 is jan,feb,mar.
Q4 is april, may,june.
So what I need is dynamically I want to delete the data every year prior to current year.
I've been able to get this select query to work, but I'm not sure how to modify it to turn it into a DELETE query:
USE QSCTestENG
select p.[testid], COUNT(c.[testid])
FROM [dbo].[tblTestHeader] p
left outer join [dbo].[tblTestMeasurements] c ON p.[testid]=c.[testid]
where p.[model] = 'XPPowerCLC125US12'
group by p.[testid]
having COUNT(c.[testid]) <>48;
The requirement is: I should allow single row delete from a table but not bulk delete. An audit table should get updated if there is any single delete or single update. So I wrote the triggers as follows: for single and bulk delete
ALTER TRIGGER [dbo].[TRG_Delete_Bulk_tbl_attendance]
ON [dbo].[tbl_attendance]
AFTER DELETE
AS
[code]...
When I try to run the website, the database error I am getting is:Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 0, current count = 1.
'****************************************************************************
Cmd.CommandText = "Drop Table Raj"
Cmd.ExecuteNonQuery()
Cmd.CommandText = "Select * Into Raj From XXX"
Cmd.ExecuteNonQuery()
'**************************************************************************
This generates error that Table already exist.
If Wait 1 sec then execute statement then it works fine.
Thanks in Advance
Piyush Verma
select convert(varchar(16), getdate(), 101)+LEFT(REPLACE(convert(varchar, getdate(), 108), ':', ''),4)
From above query I get
mmddyyyyhhmm
but it' s yyyy and hour can not be separated
04/12/200702:05
How can I separated the year and hour ?
Thanks
Daniel
I have 2 tables: Order(ID, Quantity) and Product(ID,Name, Price) and I want to add a calculated field in Order table based on the price column in the Product table. How do i do that?
this query returns the values i want in the table.
select a.quantity * b.price
from tblCustomerPurchases as a
join tblProduct as b
on a.ID=b.ID
I’ve got a situation where the columns in a table we’re grabbing from a source database keep changing as we need more information from that database. As new columns are added to the source table, I would like to dynamically look for those new columns and add them to our local database’s schema if new ones exist. We’re dropping and creating our target db table each time right now based on a pre-defined known schema, but what we really want is to drop and recreate it based on a dynamic schema, and then import all of the records from the source table to ours.It looks like a starting point might be EXEC sp_columns_rowset 'tablename' and then creating some kind of dynamic SQL statement based on that. However, I'm hoping someone might have a resource that already handles this that they might be able to steer me towards.Sincerely,
Bryan Ax
I need to add a child table that will tell us who the participants counselor is, what I did was I did a Make Table query based off the primary key of the Parent table and made that the link (foreign key) for the People_tbl and the Counselor_tbl, so if the counselor changes then the user adds the record to the counselor tbl and then puts in the Effective date. The problem is that when I run a report it doesn't show the present counselor always shows the old counselor?
Code:
SELECT Student_ind.StudentFirstName, Student_ind.StudentLastName, Student_ind.[Student ID], People_tbl.[Family ID], People_tbl.FirstName,
People_tbl.LastName, People_tbl.[Parent ID]
FROM People_tbl RIGHT OUTER JOIN
Student_ind ON People_tbl.[Family ID] = Student_ind.[Family ID]
WHERE (People_tbl.LastName = @Enter_LastName) AND (People_tbl.FirstName = @Enter_FirstName)
Here is my table:
My question is: How can I insert a row for each unique TemplateId. So let's say I have templateIds like, 2,5,6,7... For each unique templateId, how can I insert one more row?
I am working on a model where I have a sales fact table. Each fact record has four different customer fields (ship- to, sold-to, payer, and bill-to customer). I have one customer dimension table that joins to the sales fact table four times (once for each of the customer fields above). When viewing the data in Excel, I would like to have four hierarchies (ship -to, sold-to, payer, and bill-to customer) within Customer.
Is there a way to build hierarchies within my Customer dimension based on the same Customer table? What I want is to view the data in Excel and see the Customer dimension. Within Customer, I want four hierarchies.
I need to delete records from a table (Table1) which has a foreign key column in a related table (Table2).
Table1 columns are: table1Id; Name. Table2 columns include Table2.table1Id which is the foreign key to Table1.
What is the syntax to delete records from Table1 using Table1.Name='some name' and remove any records in Table2 that have Table2.table1Id equal to Table1.table1Id?
I would like to update the flag of the promotion ID should the promotion ID date range overlap with Promotion ID(All) Date Range. The general logic is as below.
Update TableName
SET PromotionID Flag = 1 AND Reason = 'Overlap with row ID(Overlap row ID number)'
Where EACH ROW(Except with Promotion ID ALL) Date Range Overlap with ROW(with promotion ID ALL) Date range
Note: ROW is Partition By ColumnA,ColumnB
TableName: PromotionList
ID PromotionID StartDate EndDate ColumnA ColumnB Flag Reason
1 1 2015-04-05 2015-05-28 NULL NULL 0 NULL
2 1 2015-04-05 2015-04-23 2 3 0 NULL
3 2 2015-05-04 2015-07-07 2 3 0 NULL
4 ALL 2015-04-05 2015-04-28 NULL NULL 0 NULL
5 ALL 2015-07-06 2015-07-10 2 3 0 NULL
6 1 2015-02-03 2015-03-03 NULL NULL 0 NULL
Expected outcome after performing update on the table
ID PromotionID StartDate EndDate ColumnA ColumnB Flag Reason
1 1 2015-04-05 2015-05-28 NULL NULL 1 Overlap with row ID 4
2 1 2015-04-05 2015-04-23 2 3 0 NULL
3 2 2015-05-04 2015-07-07 2 3 Overlap with row ID 5
4 ALL 2015-04-05 2015-04-28 NULL NULL 0 NULL
5 ALL 2015-07-06 2015-07-10 2 3 0 NULL
6 1 2015-02-03 2015-03-03 NULL NULL 0 NULL