Delete Record From Table Over 5000 Count.
Nov 17, 2006Hi, I want to delete from table when the record count is over 5000. That is, the table's record cannot over 5000 count. How? row_number() seem to be used...
View 11 Replies
ADVERTISEMENT
Delete Syntax To Delete A Record From One Table If A Matching Value Isn't Found In Another
Nov 17, 2006I'm trying to clean up a database design and I'm in a situation to where two tables need a FK but since it didn't exist before there are orphaned records.
Tables are:
Brokers and it's PK is BID
The 2nd table is Broker_Rates which also has a BID table.
I'm trying to figure out a t-sql statement that will parse through all the recrods in the Broker_Rates table and delete the record if there isn't a match for the BID record in the brokers table.
I know this isn't correct syntax but should hopefully clear up what I'm asking
DELETE FROM Broker_Rates
WHERE (Broker_Rates.BID <> Broker.BID)
Thanks
Delete Record Based On Existence Of Another Record In Same Table?
Jul 20, 2005Hi All,I have a table in SQL Server 2000 that contains several million memberids. Some of these member ids are duplicated in the table, and eachrecord is tagged with a 1 or a 2 in [recsrc] to indicate where theycame from.I want to remove all member ids records from the table that have arecsrc of 1 where the same member id also exists in the table with arecsrc of 2.So, if the member id has a recsrc of 1, and no other record exists inthe table with the same member id and a recsrc of 2, I want it leftuntouched.So, in a theortetical dataset of member id and recsrc:0001, 10002, 20001, 20003, 10004, 2I am looking to only delete the first record, because it has a recsrcof 1 and there is another record in the table with the same member idand a recsrc of 2.I'd very much appreciate it if someone could help me achieve this!Much warmth,Murray
View 3 Replies View RelatedCapturing Record Count For A Table In Oracle And Saving It In A Table In SQL Server
Jun 11, 2007I would like to find out how to capture record count for a table in oracle using SSIS and then writing that value in a SQL Server table.
I understand that I can use a variable to accomplish this task. Well first issue I run into is that what import statement do I need to use in the design script section of Script Task. I see that in many examples following statement is used for SQL Server databases:
Imports System.Data.SqlClient
Which Import statement I need to use to for Oracle database. I am using a OLE DB Connection.
any idea?
thanks
HOW TO: Delete All Records From A Table Where A Child Record From Another Table Does Not Exist.
Mar 17, 2008I need to delete all records in the TBL_PCL_LENS_DATA table that do not have a corresponding record in the TBL_VERIFICATION table.
Primary Table: TBL_PCL_LENS_DATA
PK: Serial Number
PK: ProcessedDateTime
Child Table: TBL_VERIFICATION
PK: Serial Number
Thanks,
Sean
4 Ways To Know The Record Count Of A Table
Nov 28, 2005Please tell me the 4 ways to know the record count of a table?
View 14 Replies View RelatedTable List And Record Count
Jun 7, 2006Hi.
My boss would like a list of all the tables in a specific database and their record counts. There are over 80 tables in this database, so doing one by one is not something I have time for.
Does anyone know of a system table that stores this information or an easy way of doing this?
Please help.
Thanks,
ODaniels
Realtime Record Count For Table...
Jan 18, 2007Here's a little sql 2005 script I wrote:
1. Start by running this script....
declare @x int
select @x = 1
while ( @x < 75000)
begin
insert into myTesttable values (@x)
Select @x = @x + 1
end
2. While the script is still running, I want to know how many records are in the table. From the same query window as the script, I have run both of the following statements.
select count(*) from mytesttable
witn (nolock)
select count(*) from mytesttable
witn (tablock)
Instead of getting the answer immediately, they run only after the original script has completed. They seem to be "blocked". How can I get a near realtime count of the number of records in this table while the script populates the table?
Thanks,
Barkingdog
SQL 2012 :: Delete Record From Table With ID And Rownumber
Mar 17, 2014I will try my best to explain this, We have a shopping cart on our website, the person that was developing this has now left the company and I've been given the job to finish it off.
When I load all the items that the user has entered in to his/her cart I return the Item ID and the RowNumber (ROW_NUMBER() OVER (Order by Id) AS RowNumber)
I'm trying to delete the item from the table using the following query
DELETE FROM [dbo].[Cart.Items] WHERE UniqueID = UniqueID and ItemID = @ItemID and @RowNumber IN (
SELECT ROW_NUMBER() OVER (Order by Id) AS RowNumber)
Now the reason we are using the RowNumber is because the user can add the same Item as many times as they like so for example you buy 3 different mobile phones, and you want three screen protectors, they will click screen protector 3 times which will add 3 records in to the db with the same id. so the row number is used to find the correct one.
But the above delete is not working.
SQL 2000 Corrupted Record! Can't Delete Table
May 9, 2008Hi All,
I have just one corrupted record on a table: I copied everything else to another table but I can't delete or rename the old one!
Is restoring the whole DB my only way out there?
Any help or suggestion would be much appreciated!
Cheers
How To Make Form To Delete Record From Table In Access 2002
Jun 29, 2004I like to give First Name and Last Name in two different text box and then hit the delete button (command button). Then it will do a query to find the person and delete the corresponding record from the table. Any kind of help will be appreciated. Thank you.
View 1 Replies View RelatedTransact SQL :: Error 1934 When Trying To Delete A Record From File-table?
Sep 28, 2015I just wanted to delete a record from a filetable by "delete from dbo.DocumentStore where stream_id = 'A322276D-AE65-E511-8266-005056C00008'".
Then i received error 1934:
Meldung 1934, Ebene 16, Status 1, Zeile 578
Fehler bei DELETE, da die folgenden SET-Optionen falsche Einstellungen aufweisen: 'ANSI_PADDING'. Überprüfen Sie, ob die SET-Optionen für die Verwendung mit indizierte Sichten und/oder Indizes für berechnete Spalten und/oder gefilterte Indizes und/oder Abfragebenachrichtigungen
und/oder XML-Datentypmethoden und/oder Vorgänge für räumliche Indizes richtig sind.
Something that i made a mistake with the SET-option for 'ANSI_PADDING' with indexted views and/or calculated rows and/or filtered indeces ...
Delete Record From Table A That Is Not In Table B
Apr 2, 2008
I have two tables;
Table A
id, name
101, jones
102, smith
103, williams
104, johnson
105, brown
106, green
107, anderson
Table B
id, name, city, state
101, jones, des moine, Idaho
103, williams, Corvallis, Oregon
104, johnson, Grand Forks, North Dakota
105, brown, Phoenix, Arizona
107, anderson, New York, New York
I need to delete records from Table A that are not in Table B. My front end is writen in .net and I am using Data Access Layer along with a Business Logic Layer for data interaction.
I have tried at least seven variations of joining, right outer join, left outer join resulting in wiping our the entire table or nothing at all; not to mention deleting the record that ought to remain and keeping the record that needs to be deleted!
In my BLL I tried to capture the rowsAffected for the deletion by using-without success.
Dim rowsAffected As Integer = Adapter.ID_Deletion(ID)
If rowsAffected = 1 Then
Exit Function
Else
Return rowsAffected = 1
End If
Please help.
MsMe.
Newbie-DELETE A Record In A Table A That Is Related To Table B, And Table B Related To Table A
Mar 20, 2008Hi thanks for looking at my question
Using sqlServer management studio 2005
My Tables are something like this:
--Table 1 "Employee"
CREATE TABLE [MyCompany].[Employee](
[EmployeeGID] [int] IDENTITY(1,1) NOT NULL,
[BranchFID] [int] NOT NULL,
[FirstName] [varchar](50) NOT NULL,
[MiddleName] [varchar](50) NOT NULL,
[LastName] [varchar](50) NOT NULL,
CONSTRAINT [PK_Employee] PRIMARY KEY CLUSTERED
(
[EmployeeGID]
)
GO
ALTER TABLE [MyCompany].[Employee]
WITH CHECK ADD CONSTRAINT [FK_Employee_BranchFID]
FOREIGN KEY([BranchFID])
REFERENCES [myCompany].[Branch] ([BranchGID])
GO
ALTER TABLE [MyCompany].[Employee] CHECK CONSTRAINT [FK_Employee_BranchFID]
-- Table 2 "Branch"
CREATE TABLE [Mycompany].[Branch](
[BranchGID] [int] IDENTITY(1,1) NOT NULL,
[BranchName] [varchar](50) NOT NULL,
[City] [varchar](50) NOT NULL,
[ManagerFID] [int] NOT NULL,
CONSTRAINT [PK_Branch] PRIMARY KEY CLUSTERED
(
[BranchGID]
)
GO
ALTER TABLE [MyCompany].[Branch]
WITH CHECK ADD CONSTRAINT [FK_Branch_ManagerFID]
FOREIGN KEY([ManagerFID])
REFERENCES [MyCompany].[Employee] ([EmployeeGID])
GO
ALTER TABLE [MyCompany].[Branch]
CHECK CONSTRAINT [FK_Branch_ManagerFID]
--Foreign IDs = FID
--generated IDs = GID
Then I try a simple single row DELETE
DELETE FROM MyCompany.Employee
WHERE EmployeeGID= 39
Well this might look like a very basic error:
I get this Error after trying to delete something from Table €œEmployee€?
The DELETE statement conflicted with the
REFERENCE constraint "FK_Branch_ManagerFID".
The conflict occurred in database "MyDatabase",
table "myCompany.Branch", column 'ManagerFID'.
Yes what I€™ve been doing is to deactivate the foreign key constraint, in both tables when performing these kinds of operations, same thing if I try to delete a €œBranch€? entry, basically each entry in €œbranch€? and €œEmployee€? is child of each other which makes things more complicated.
My question is, is there a simple way to overcome this obstacle without having to deactivate the foreign key constraints every time or a good way to prevent this from happening in the first place? Is this when I have to use €œON DELETE CASCADE€? or something?
Thanks
How To Return First Record Child Record And Count
Jan 31, 2006I've been looking for examples online to write a SPROC to get some data. Here are the tables.
Album_Category
AlbumCategoryID (PK, int, not null)
Caption (nvarchar(max), not null)
IsPublic (bit, not null)
Albums
AlbumID (PK, int, not null)
AlbumCategoryID (int, null)
Caption (nvarchar(max), not null)
IsPublic (bit, not null)
I need to return:
-[Album_Category].[AlbumCategoryID]
-[Album_Category].[Caption]
-[Albums].[Single AlubmID for each AlbumCategoryID]
-[Count of Albums in each AlbumCategory]
I hope I was fairly clear in what I'm trying to do. Any tips or help would be appreciated. Thanks.
SQL Server 2008 :: Row Locks Not Escalating To Table Locks After 5000
Jul 16, 2015I've got an INSERT that's selecting data from a linked server and attempting to push 10 million rows into the blank table. More or less, it looks like this:
insert into ReceivingTable (
Field1, Field2, Field3, Field4
, Field5, Field6, Field7, Field8
, Field9, Field10, Field11, Field12
, Field13, Field14, Field15
[code]...
The instance of the SQL Server Database Engine cannot obtain a LOCK resource at this time. Rerun your statement when there are fewer active users. Ask the database administrator to check the lock and memory configuration for this instance, or to check for long-running transactions. There are no other active users. I ran it again and monitored the following DMO to watch the growth of locks for that spid:
SELECT request_session_id, COUNT (*) num_locks
-- select *
FROM sys.dm_tran_locks
--where request_session_id = 77
GROUP BY request_session_id
ORDER BY count (*) DESC
The number of locks started small and held for a while around 4-7 locks, but at about 5 minutes in the number of locks held by that spid grew dramatically to more than 8 million before finally erroring again with the same message. Researching, I can't figure out why it's not escalating from row locks to table locks at the appropriate threshold. The threshold in was set to 0 at first (Server Properties > Advanced > Parallelism > Locks). I set it to 5000, and it still didn't seem to work. Rewriting the INSERT to include a WITH (TABLOCK) allows it to finish successfully in testing. My problem is that it's coming out of an ETL with source code that I can't edit. I need to figure out how to force it to escalate to locking the entire table via table or server level settings.
A colleague suggested that installing service packs may take care of it (the client is running SQL Server 2008 R2 (RTM)), but I haven't found anything online to support that theory.
Soft Delete In Table, Why Merge Agent Report Hards Delete On Table ?
Feb 1, 2007Hi seniors
there are two tables involve in replication let say table1 and replicated table is also rep.table1.
we are not deleting records physically in table1 so only a bit in table1 has true when u want to delete a record but the strange thing is that replication agaent report that this is hard delete operation on table1 so download and report hard delete operation and delete the record in replicated table which is very crucial.
plz let me know where am i wrong and how i put it into right way.
there is no triggers on published tables and noother trigger is created on published table.
regards
Ahmad Drshen
Dts Record Count
Nov 30, 2004I have a dts package that export data from a database to a text file. I could like to create a validation script to coun the data in the database that should be exported to file and then re-count again after the data is in the text file. Also count the number of columns that is exported.
Is there a way to do that within a dts package?
Help!
Lystra
Record Count = 0
Sep 17, 2007Hello all
How to stop a report from being displayed if the record count is 0 in Reporting services.
Thanks
Ram
Record Count With Srs
Nov 12, 2007
I would like to count rows by grouping of companys. So for one company when the report display the company employee they are associated a number. Example:
Company: Xrite
User: Tom Smith
User # 1
User: Jane Doe
User # 2
Company: Xwrong
User: George Green
User # 1
User: Mary Jane
User #2
I found the function RowNumber(). This function used as follows RowNumber(Nothing) Returns a row number for each record of the table instead of by company name (which is the group by).
Is there a way to use this function RowNumber() or any way in SRS to get the results I'm looking for?
Thanks,
Max
Record Count Percentage
Jul 19, 2007How do I write a query to give me the total records in databaseA.tableA divided by the total records in databaseB.tableA
This is what I have so far:DECLARE @today as datetime
DECLARE @past as datetime
/* set the dates */
set @today = getdate()
set @past = getdate() - 3 /* Go back 3 days */
/* create temp table for holding total cases*/
CREATE TABLE #CaseTotalCount
(
TotalCount int
)
/**/
CREATE TABLE #FlashCycleCount
(
FlashCount int
)
/**/
INSERT INTO #CaseTotalCount (TotalCount)
SELECT COUNT (DataBaseA.dbo.tblProcedureData.CaseID) as TotalCount
FROM DataBaseA.dbo.tblProcedureData
WHERE DataBaseA.dbo.tblProcedureData.Date < @today AND DataBaseA.dbo.tblProcedureData.Date > @past
/**/
INSERT INTO #FlashCycleCount (FlashCount)
SELECT COUNT (DataBaseB.dbo.tblFlashLog.FlashLogID) AS FlashCount
FROM DataBaseB.dbo.tblFlashLog
WHERE DataBaseB.dbo.tblFlashLog.LoadDate < @today AND DataBaseB.dbo.tblFlashLog.LoadDate > @past
/*function call*/
SELECT dbo.percentage(#FlashCycleCount.FlashCount, #PeriOpTotalCount.TotalCount)
FROM #FlashCycleCount
JOIN #PeriopTotalCount
ON #PeriOpTotalCount.TotalCount != 0 This works but when I try to bind this to a formview a get nothing. any ides?
Can I Get A Record Count From A SqlDataSource
Apr 2, 2008I I have a GridView with paging enabled which is bound to a SqlDataSource. I'd like to be able to tell the user how many records were returned in total by the SqlDataSource. Is there any way to do this without re-running the query?
View 3 Replies View RelatedDatatype Is Int.. How Many Can Be Record Count ? :)
Jun 2, 2008hello friends
i have table1 in aspnetdb.mdf. my cloumname usernumber and my datatype is int.
how may can be usernumber ? what is the max usernamber ?
or there is bigint as datatype.. what is the max usernumber for bigint ?
if you tell me about int32 and int 64, i couldnt find int32 and int64 as datatype in table1 in aspnetdb.mdf
cheers
Record Count In Sqldatasource
Feb 16, 2006Hi,
I would like to know how many records are selected in sqldatasource after select command
Thanks
Limiting Record Count.
Aug 25, 2004Hello.
I am trying to limit the number of records to start in a position and show me "n" records. Here is an example query:
SELECT TOP 60 * FROM Entries WHERE Id NOT IN ( SELECT TOP 45 Id FROM Entries ORDER BY Id DESC ) AND Static = False AND Authorized = False ORDER BY Id DESC
It's not working correctlly. Any ideas?
Thanks in advance.
Record Count Confusion
May 30, 2007I have been assigned to fix a script which i did not write and that is not in SQL, but calls to SQL to get it's results.
It reads from a payroll table in SQL with 943 total records (of which about 280 are active employees).
When i run the script, i receive a series of errors listing the field that the error is in (ie: Badge or PayRule) and the record # causing the error.
My problem is that the 1st record # that returns an error is #946. I get a total of 45 records that generate errors of this sort. (ie: #946-957 Badge, 1154-1159 Badge, 1482-1497 PayRule, 1562-1568 Badge, 2083-2086 PayRule).
IF i can figure out which employee those records belong to I will have a much better chance of finding the cause of the errors and correcting them.
When it gives a record #, i always thought it was the row in the table that was referred to, but since the record #'s i am receiving are larger than the number of rows in the table, i am utterly confused!
So...i guess my question is, how do I count the records if not by row?
thanks in advance, and i hope this makes sense!
ed c
Record Count In All Tables
Jan 11, 2006There a stored procedure or query that will count all the recordsin all my tables in a database.One of these two -exec sp_MSforeachtable N'SELECT "table" = ''?'', cnt = COUNT(*) FROM ?'select object_name(id), rows from sysindexes where indid in (1, 0)Is there a way to add columns to the second query? I would like to seehow many columns and their names as well.Thanks.
View 1 Replies View RelatedFast Record Count
Mar 21, 2007I think I am asking this in the right place.
I'm trying to get a record count from a table with 30million items and it takes forever.
Here is my code:
SELECT COUNT(f_id) AS 'ROWCOUNT' FROM tablename
Is there a faster way.
BTW f_id is primary key indexed.
Thanks
Delete Record From SS7
Jul 31, 2000I accidently made a duplicate record and I am unable to delete it. Everytime I try to delete, it gives me an error message saying:
Insufficient oe incorrect key coloumn information; too many rows affected by the update.
I am unable to delete either records. Is there another way of accomplishing this task. Thanks for your help in advance.
Bud
Cant Delete A Record
Jan 1, 2006Hello i am new to MS SQL. Just moved in from MS Access.
I used to program in VB6.
mY Question is when i attemp to delete a record the followin error message displays
"Key column information is insufficiant or incorrect.Too many rows were affected by the update."
I have put the as code for the 'DELETE Record' command button in VB6 as follows.
adomain.Recordset.Delete adAffectCurrent
Please help me to safley delete a record from the SQL database using VB6.
Delete A Record
Dec 14, 2007Hi,
How can i delete a record from a table . table contains approx 3 million data and when i execute a query for delete it give error message from transaction log space problem.
Is there any way to stop the log in transaction log and delete the record.
thanks
Delete Record
Jul 20, 2005please helpi was trying to delete a specific record on a table but it still showsthe same record that should be deleted. i dont know how.
View 3 Replies View RelatedCount Record Gruop Wise
Apr 3, 2008Hi all,
i am using sql server 2005.
let me explain the scenario.
i am writing a function that return no of call a sales execituve done.
an executive can present n no of product to one customer but that call will be only one
my table record look like
empid custid product date and other field
em111 iimran aaaa 01-04-2008 ........
em111 iimran bbbb 01-04-2008 ........
em111 iimran cccc 01-04-2008 ........
em111 xxxxxx aaaa 01-04-2008 ........
em111 xxxxxx 2222 01-04-2008 ........
em111 iimran aaaa 02-04-2008 ........
em111 iimran bbbb 02-04-2008 ........
em111 iimran cccc 02-04-2008 ........
em111 xxxxxx aaaa 02-04-2008 ........
em111 xxxxxx 2222 02-04-2008 ........
Now if i select total no of call it should give me four call
also i am getting this through this query
select dcr_date , cust_id from vwdcrdtl where emp_id = @empcode and dcr_date between @stdate and @enddate group by dcr_date , dcr_cust_id
this query correctly return 4 rowcount(which i am gerring though @@rowcount) but i want this rowcount to return from function
i assinged this to rowcount to int veriable but this giving me error .
i would like to know how can i get count of these records
Please Help