Short Question: How do I delete all records from a destination table prior to appending new data to that table?
I am working with a SQL database that was migrated from MS Access. All relationships, primary keys, and identity columns have been set identically to the MS Access database values. The MS Access database is still being used as the database of record until the SQL database is fully functional with front-end, etc.
I want to delete the information stored in all the SQL tables, and then append the MS Access values to the SQL tables. I was able to write delete and append queries in MS Access to correctly transfer data to the SQL tables. However, I would prefer doing this through SSIS because I have several other sources of data to move to a SQL Server database and most of those other sources are not a MS Access database.
Due to relational entegrity settings, I need to delete the records from 8 tables in a specific order. I have tried independent control objects for each of the 8 tables with data flow objects of either "OLE DB Command" or "OLE DB Source" with the SQL command as "Delete From TableName". Results of the debug indicate everything is "green" but no records were deleted fromt the tables.
I am developing an ETL wherein the requirement is to do an incremental load and at the same time, if there is a record that got deleted in the Source delete it from the destination too, makes sense.
The approach am doing is, pick data from the SRC and Destination, pass it onto a Merge join component, do a Full Outer join, then pass the rows to a conditional split. Newly Added records and updated records I can handle, how do I handle the Deleted records?
Am I correct in the way I am doing or there is something better to handle this?
Writing a Control flow that inserts records worked fine, using lookups and all, but i can't find somewhere an example on how to update records of even delete records.
I need to delete records from a table (Table1) which has a foreign key column in a related table (Table2).
Table1 columns are: table1Id; Name. Table2 columns include Table2.table1Id which is the foreign key to Table1.
What is the syntax to delete records from Table1 using Table1.Name='some name' and remove any records in Table2 that have Table2.table1Id equal to Table1.table1Id?
:confused: Urgent!! Hi there. I use MS SQL server. I would like to separate the data from one table to two tables refer to two reference tables and the following conditions:
Let say these two reference tables are called: Table A & Table B
Group A: 1. Same date in Table A & Table B 2. Same ID in Table A & Table B (ID is not unique) 3. Same name in Table A & Table B (Name is not unique)
Combine all of these three conditions for unique identifier.
I used the following SQL code to separate the required data that match the above conditions to the new table. (Code) select a.Project, a.Site, a.S_number, a.Field_ID, a.Method, a.Analyte, a.Result, a.Units, a.Qualifier, a.Dilution_Factor, a.Reporting_limit, a.Recovery_, a.Matrix, a.CAS_Number, a.Sample_Date, a.Received_Date, a.Prep_Date, a.Analysis_Date, a.Batch_ID, a.Data_Package_num_SDG, a.Lab_Sample_ID, a.Lab into APPL_union_exist from APPL_union_update a, Before_01012004_report b where a.Field_ID = b.[Field Sample] and a.Sample_Date = b.Collected and a.Analyte = b.Analyte
However, I don't know how to delete the data that copied to the new table in original table, or separate that to the new table. Wish someone can help me. Thanks a lot
I uploaded some data about 2 or 3 times and it keep appending it to thetable.Now I want to keep only first duplicate and delete rest of.Suppose part number 123 has been added 3 times so I want to keep only 1record.Thanks
Hello Frnds....Can anybody give the answer of this question as How to Delete duplicate records from Table ? I Know that with check option and also with Unique Constraint we can avoid to enter duplicate records in table but How to delete from table which does not have any constraints ?
Hello, I'm developing application which monitors network packets. The monitoring data are saved into table. Monitoring table maintains the data for fixed quantum time,for example during one 1 hour. So, every minute before or after insert new data, I delete the time-expired data. I doubt that the endless delete operation would results in some problems(increasing index,etc..).
Hello, I have been serching for weeks to resolve this problem. I am new to ASP.NET and trying to make the migration from ASP which I have programmed in for years. I am using Microsoft Visual Web Developer 2005 Express Edition and SQL Express Edtion. I have been working through the Microsoft Video Training at http://msdn.microsoft.com/vstudio/express/beginner/learningpath/ and created a web site using Tier 3 Lesson 8 as the model. My new web site which is a simple phone book applicaiton lets me read the table and select the record without any problem. But the update form lets me edit but when I attempt to Apply the update I get the following error. Server Error in '/Phonebook' Application. ObjectDataSource 'ObjectDataSource1' could not find a non-generic method 'Update' that has parameters: FirstName, LastName, PhoneNumber, BossGroup, Department, BossPickup, ShowInPhonebook, Type, Original_FirstName, Original_LastName, Original_PhoneNumber, Original_BossGroup, Original_Department, Original_BossPickup, Original_ShowInPhoneBook, Original_Type, Original_ItemID. Description: An unhundled expception occured during the execution of the current web request. Please review the stack trace for more information about the error and where it originiated in the code. The Stack Trace basiclly showes the same error as above. Also, when I attempt to delete the record I do not get an error but the record does not delete. What is interesting is that I can add a record so I do not believe that it is a security permissions issue. I have the ISS Authinication Method Enable Anonymous Access set on with full control. If anyone has any insight as to why this is occuring please let me know.
I have a scheduled job which does an text file import in my database . The data gets appended in my table every day from this import job .
Since my table is growing every day , i want to truncate the table after the data has been collected for three months i.e 90 days . The table will be empty and the new data will flow in through the import .
Any thoughts how to do it through query and schedule it ???
I have a task to create a dts package, which will delete records in a SQL table, which are present on a sheet tab in Excel. I know how to transfer records from Excel to SQL table and vice versa, but not sure how I can delete the records in SQL table, which are present in Excel. Note that there are just 2 columns - one is a key and the other name.
DELETE FROM [SCS_NAV2009R2_PROD].[dbo].[Payroll Ledger Entry]
gives this error
Msg 9002, Level 17, State 4, Line 1
The transaction log for database 'SCS_NAV2009R2_PROD' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
~ 7,000,000 records
now i have set the log to autogrow and set the max size to 2tb
We have a large test database with million of records for more than company site Code. Sometime we want to refresh the data of that database for one or more site Codes.
In order to do that I have to delete all records of the site code we want to refresh on the test database first then copy a new set of data from production database over. Since we refresh data based on the site code therefore I have to use the Delete command instead of Truncate.
Since this is a huge database with thousand of tables and million of records per table I have a performance issues with delete command. So what would be the best to delete a large number of records without writing any information to database log file?
FYI: The Recovery model of this database is Simple
Is there a way that I can reset the key field to 1 when using DELETE to clear a table? (Note: if there is a separate command that I could use after the DELETE, that is fine too.) Thank you for your help with this, -DJ
I am using a SQL Server Agent jobs that run each morning to update the records in a table to match what they should be for that day. I built them and tested it using a test table called "testtable1". It worked fine. But when I switched over to our production table, it fails saying the table has to be decaled. What would be the difference. The production table has a "@" in front of the name, is that causing issues?
USE [Live_build] GO SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO BEGIN DELETE FROM @ZIPLIST INSERT INTO @ZIPLIST SELECT * FROM tblZip3DSWed; END
I have been searching many postings and I cant seem to find anyonethat has this answer so I decided to post. I am using SQL(Transact-SQL).If I have 2 tables with columnsacct_num,activity_date,and pay_amt and I want to delete one instanceof a record in table 1 for every instance of that record in table 2how could I do that. For example.Table 1-----------acct activity_date pay_amt123 5/1/2004 50.00123 5/1/2004 50.00123 5/1/2004 50.00123 5/1/2004 50.00123 5/1/2004 50.00Table 2-----------acct activity_date pay_amt123 5/1/2004 50.00123 5/1/2004 50.00I need a delete statement that will find 2 of the 5 records(It doesn'tmatter which 2) and delete them.Leaving table one looking like this.Table 1-----------acct activity_date pay_amt123 5/1/2004 50.00123 5/1/2004 50.00123 5/1/2004 50.00How can I do this??
I've 2 tables ResumeSkill (Child table) and Skill (Parent table), There are duplicates in the parent table and after removing the foreign key constraint in child table deleted all duplicate values from Parent table. But those deleted duplicate values has references in child table which need to be deleted now.
ResumeSkill Skill
Id SkillId SkillId Name
I want to delete all the records from ResumeSkill that dont have matching skillId in Skill table.
I'm looking at SSIS and SqlBulkCopy as a possible method to quickly insert and process large amounts of data, my current method uses the sp_xml_preparedocument and OPENXML to parse an xml document of the data I want to process and insert into the database, however I'm noticing the performance of SqlServer parsing the xml document isn't that good.
I found the C# SqlBulkCopy method (new in .NET 2.0) and I was thinking it would be faster to use that to load my data into a staging table and then use SSIS to extract the data from the staging table, process and transform it as necessary and finally load it into the final destination tables. I was able to create an Integration Services Project that selects the data from the staging table, does a bit of processing on one of the fields (by calling a stored procedure), and finally loads the processed data into the final table.
The problem with this is I need to clean out the rows that were extracted from the staging table and I'm not sure how I can accomplish this (and I can't just issue a "delete from staging_table" because there maybe new records in the staging table that were not processed), perhaps I can either delete each record as it is proccessed or somehow get the last proccessed identity id from the staging table and delete all records less than or equal to that id.
thanks in advance for any help you can provide, maybe there is an easy way to accomplish what I'm trying to do.
I have these two tables Log and CategoryLog, I need to archive records older than 13 months in these two tables to two separate tables and then delete the archived records from Log and CategoryLog tables. The problem is that only 'Log' table has a date column, the other table CategoryLog does not have any date column. But the two tables are connected by a column(LogID). How to archive the data and then delete the archive data from both tables.
I have around 3 tables having around 20 to 30gb of data. My table A related to table B by a FK and same way table B related to table C by FK. I would like to delete all rows satisfying certain condition from table A and all corresponding related records from table B and C. I have created a query to delete the grandchild first, followed by child table and finally parent. I have used inner join in my delete query. As you all know, inner join delete operations, are going to be extremely resource Intensive especially on bigger tables.
What is the best approach to delete all these rows? There are many constraints, triggers on these tables. Also, there might be some FK relations to other tables as well.
How to delete records from multiple tables if main table’s entity is deleted as constraints is applied on all..There is this main table called Organization or TblOrganization.and this organization have branches which are in Brach table called tblBranch and this branch have multiple applications let say tblApplication and these application are used by multiple users called tblUsers.What I want is: when I delete the Organization All branches, application and users related to it must be deleted also.How I can apply that on a button click in asp.net web forms..Right now this is my delete function which is very simple
Public void Delete(int? id){ var str=”DELETE FROM tblOrganization WHERE organizationId=”+ id ; } And My tables LOOK LIKE this CREATE TABLE tblOrganization ( OrganizationId int, OrganizationName varchar(255)
I am using Master Data Service for couple of months now. I can load, update, merge and soft delete data in MDS. Occasionally we even have to hard delete data from MDS. If we keep on soft deleting records in a MDS table eventually there will be huge number of soft deleted records. Is there an easy way to hard delete all the soft deleted records from all MDS tables in a specific Model.
I have been trying to solve the locking problem from past couple of days. Please help mee!!
Scenario: -------------- I have a SSIS package in which 2 data flow tasks. 1st data flow task deletes records from a 5 tables and the 2nd data flow task should insert records into 1 of the five tables after the success of 1st data flow task. This scenario runs in Transacation.
The above scenrio in the 2nd data flow task hangs in runtime. It does not complete. with sp_who2 command i could see that there is an intent share lock(LK_M_IS) on the table and the status is SUSPENDED.
I dont know how to come out of this locking. Please help.
I am exporting table rows (based on a query) into an excel file but I don't want to append to the file. I would like to delete the rows that were previously added and then add the new data. The file has column headings and I would like these to exist all the time.
I know how to export the data but don't know how to delete 'old' data rows from excel.
there are two tables involve in replication let say table1 and replicated table is also rep.table1.
we are not deleting records physically in table1 so only a bit in table1 has true when u want to delete a record but the strange thing is that replication agaent report that this is hard delete operation on table1 so download and report hard delete operation and delete the record in replicated table which is very crucial.
plz let me know where am i wrong and how i put it into right way.
there is no triggers on published tables and noother trigger is created on published table.
