Delete Using A Linked Server
Dec 12, 2005
Hi,
I am trying to delete records in a file on the AS400 using a linked server
and I am getting the following error message:
Server: Msg 7345, Level 16, State 1, Line 1
OLE DB provider 'MSDASQL' could not delete from table '"catalog"."schema"."table"'. There was a recoverable, provider-specific error, such as an RPC failure.
ODBC: Msg 0, Level 19, State 1
SqlDumpExceptionHandler: Process 58 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
[OLE/DB provider returned message: Multiple-step operation generated errors. Check each status value.]
OLE DB error trace [OLE/DB Provider 'MSDASQL' IRowsetChange::DeleteRows returned 0x80040e21: DBROWSTATUS_E_FAIL].
The linked server is configured as follows:
"server type": other data source
"provider name": Microsoft OLE DB provider for ODBC drivers
"data source" references a system DSN name that uses the driver
"Client Access ODBC driver(32 bit)"
linked server options: "Data access" and "Use remote collation" boxes checked
provider options: "Dynamic parameters", "Nested queries", "Allow in process",
"Non transacted updates" boxes checked
The file on the AS400 is journaled and has a unique key.
The Select and Insert statements work like a charm but I can not for the life of me get the Delete or Update statements to work.
I have been struggling with this problem for over a month, so any help whatsoever would be tremendously appreciated.
Thanks!
View 4 Replies
ADVERTISEMENT
Sep 8, 2014
I have a procedure on SQLSERVER DB1 where i insert into few tables on SQL SERVER DB1 and delete a table on remote server SQL SERVER DB2 via linked server. Unfortunately, the delete is taking for ever. Procedure never completes. Data in that table is close to 500 records.
I have delete statement like
Exec(delete linkserv.onedb.stg.tab1)
Later i modified the delete query as below but no luck
DELETE OPENQUERY(linkserv, 'Select * from onedb.stg.tab1')
What can i do here to get this fixed?
Please see linked server properties below
Enable promotion of distributed transactions for RPC:True
Use Remote Collation: True
All other properties : False
How can i debug my SQL Server procedure and find the issue. I came to know that i do not have permission to use debug feature on SSMS.
View 2 Replies
View Related
May 16, 2006
I am getting time-out errors when I try to perform a simple delete on alinked server. The command is:Delete From MyTable Where PKID=12345I have tried executing this command directly from Query Analyzer, but itjust times out. However, when I run it from QA against the server itself(rather than from my local server against a linked server), it executesimmediately. Similarly, if I run the same SQL command through an ODBC linkedtable in an Access 2000 MDB file (tweaking the syntax slightly), it alsoexecutes immediately. Only if I run it from SQL 7 as a stored procedure or aQA command against a linked server does it time-out.I have no problems inserting rows using any of the three methods notedabove. It is only with deleting rows through the linked server that it timesout.Thanks for any assistance.Neil
View 5 Replies
View Related
Oct 6, 2007
Hi all,
We are retriving tables from DB2 and loading into a SQL server. while retriving temporary tables are getting created in the linked server. we need to delete the data in those temporary tables in Linked server. I don't know how to write delete statement for the tables in linked server. any pointers would be appreciated.
Thanks in advance.
Shriram
View 1 Replies
View Related
Sep 1, 2015
I am planning to delete a login from SQL logins because he moved out from project .when i try to delete the login , it throws an error saying " The server principal owns an endpoint and cannot be dropped , error 15141 "
Same problem facing on different servers.
Note : Environment is SQL 2012,SQL 2008 including cluster servers .
View 2 Replies
View Related
Apr 6, 2006
Hii want to delete a row in my database but the problem is, i cant delete it as other table rows is linked to it. I have to delete all the rows thats linked to the row i wanna delete first.Is there a easier way to delete the row and all the rows thats linked to it? i wanna code it to do it.an suggestions?
View 1 Replies
View Related
Apr 17, 2006
I am hoping this is a quick easy question for someone! :)I am trying (struggling) with moving data from Sql Server to a LotusNotes table.I am using SQL Server 2000, I have a Lotus Notes linked server (usingNotesSQL), and I wasnt to clear the table (delete all records) and thenreload it from my data on SQL Server.What is the syntax to delete the records?My select statement would be like this:select * from openquery([LinkedServer], 'select * from NotesTable')where lastName='Smith'My delete statement ??? -- cant quite figure out the syntax of thisone....select * from openquery([LinkedServer], 'delete from NotesTable') wherelastName='Smith'(this doesnt work)Thanks!
View 9 Replies
View Related
Mar 25, 2002
Hi ,
On my Desktop i registered Production Server in Enterprise Manager
on that Server if i go to SecurityLinked Servers
There is another Server is already mapped, when i am trying to see the Tables under that one of the
Linked Server i am getting the Error message saying that
"Error 17 SQL Server does not exist or access denied"
if i went to Production Server location and if i try to see the tables i am able to see properly, no problems
why i am not able to see from my Desk top
i am using the sa user while mapping the Production Server on my DESKTOP using (ENTERPRISE MANAGER)
And i check the Client Network Utility in the Alias using Named Pipe only, i changed to TCP/IP still same problem
What might the Problem how can i see the Tables in Linked Server from my DESKTOP
Thanks
View 5 Replies
View Related
Apr 24, 2015
I am using Linked Server in SQL Server 2008R2 connecting to a couple of Linked Servers.
I was able to connect Linked Servers, but I cannot point to a specific database in a Linked Server, also, I cannot rename Linked Server's name.
How to point the linked server to a specific database? How to rename the Linked Server?
The following is the code that I am using right now:
USE [master]
GO
EXEC master.dbo.sp_addlinkedserver
@server = N'Machine123Instance456',
@srvproduct=N'SQL Server' ;
GO
EXEC sp_addlinkedsrvlogin 'Machine123Instance456', 'false', NULL, 'username', 'password'
View 6 Replies
View Related
Jul 18, 2006
Is there a way to bypass the syntax checking when adding a stored procedure via a script?
I have a script that has a LINKed server reference (see below) .
INSERT
INTO ACTDMSLINKED.ACTDMS.DBO.COILS ..etc.
ACTDMSLINKED does not exist at the time I need to add the stored procedure that references it.
PLEASE to not tell me to add the LINK and then run the script. This is not an option in this scenerio.
Thanks,
Terry
View 4 Replies
View Related
Sep 11, 2015
I have some simple files but they are failing because the delete history task is failing as it is looking for files in a non existent directory.
It is looking for files in C:Program FilesMicrosoft SQL ServerMSSQL10_50.INSTANCEMSSQLLog whereas it should be looking in C:Program FilesMicrosoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLLog
how I can get this corrected so I can get the Maintenance Plans to run correctly.
I have tried deleting and recreating the Plan but to no avail
View 0 Replies
View Related
May 19, 2012
I am using Master Data Service for couple of months now. I can load, update, merge and soft delete data in MDS. Occasionally we even have to hard delete data from MDS. If we keep on soft deleting records in a MDS table eventually there will be huge number of soft deleted records. Is there an easy way to hard delete all the soft deleted records from all MDS tables in a specific Model.
View 18 Replies
View Related
Oct 23, 2004
Hello:
Need some serious help with this one...
Background:
Am working on completing an ORM that can not only handles CRUD actions -- but that can also updates the structure of a table transparently when the class defs change. Reason for this is that I can't get the SQL scripts that would work for updating a software on SqlServer to be portable to other DBMS systems. Doing it by code, rather than SQL batch has a chance of making cross-platform, updateable, software...
Anyway, because it needs to be cross-DBMS capable, the constraints are that the system used must work for the lowest common denominator....ie, a 'recipe' of steps that will work on all DBMS's.
The Problem:
There might be simpler ways to do this with SqlServer (all ears :-) - just in case I can't make it cross platform right now) but, with simplistic DBMS's (SqlLite, etc) there is no way to ALTER table once formed: one has to COPY the Table to a new TMP name, adding a Column in the process, then delete the original, then rename the TMP to the original name.
This appears possible in SqlServer too --...as long as there are no CASCADE operations.
Truncate table doesn't seem to be the solution, nor drop, as they all seem to trigger a Cascade delete in the Foreign Table.
So -- please correct me if I am wrong here -- it appears that the operations would be
along the lines of:
a) Remove the Foreign Key references
b) Copy the table structure, and make a new temp table, adding the column
c) Copy the data over
d) Add the FK relations, that used to be in the first table, to the new table
e) Delete the original
f) Done?
The questions are:
a) How does one alter a table to REMOVE the Foreign Key References part, if it has no 'name'.
b) Anyone know of a good clean way to get, and save these constraints to reapply them to the new table. Hopefully with some cross platform ADO.NET solution? GetSchema etc appears to me to be very dbms dependant?
c) ANY and all tips on things I might run into later that I have not mentioned, are also greatly appreciated.
Thanks!
Sky
View 1 Replies
View Related
Nov 13, 2006
I am having great difficulty with cascading deletes, delete triggers and referential integrity.
The database is in First Normal Form.
I have some tables that are child tables with two foreign keyes to two different parent tables, for example:
Table A
/
Table B Table C
/
Table D
So if I try to turn on cascading deletes for A/B, A/C, B/D and C/D relationships, I get an error that I cannot have cascading delete because it would create multiple cascade paths. I do understand why this is happening. If I delete a row in Table A, I want it to delete child rows in Table B and table C, and then child rows in table D as well. But if I delete a row in Table C, I want it to delete child rows in Table D, and if I delete a row in Table B, I want it to also delete child rows in Table D.
SQL sees this as cyclical, because if I delete a row in table A, both table B and table C would try to delete their child rows in table D.
Ok, so I thought, no biggie, I'll just use delete triggers. So I created delete triggers that will delete child rows in table B and table C when deleting a row in table A. Then I created triggers in both Table B and Table C that would delete child rows in Table D.
When I try to delete a row in table A, B or C, I get the error "Delete Statement Conflicted with COLUMN REFERENCE". This does not make sense to me, can anyone explain? I have a trigger in place that should be deleting the child rows before it attempts to delete the parent row...isn't that the whole point of delete triggers?????
This is an example of my delete trigger:
CREATE TRIGGER [DeleteA] ON A
FOR DELETE
AS
Delete from B where MeetingID = ID;
Delete from C where MeetingID = ID;
And then Table B and C both have delete triggers to delete child rows in table D. But it never gets to that point, none of the triggers execute because the above error happens first.
So if I then go into the relationships, and deselect the option for "Enforce relationship for INSERTs and UPDATEs" these triggers all work just fine. Only problem is that now I have no referential integrity and I can simply create unrestrained child rows that do not reference actual foreign keys in the parent table.
So the question is, how do I maintain referential integrity and also have the database delete child rows, keeping in mind that the cascading deletes will not work because of the multiple cascade paths (which are certainly required).
Hope this makes sense...
Thanks,
Josh
View 6 Replies
View Related
Nov 17, 2006
I'm trying to clean up a database design and I'm in a situation to where two tables need a FK but since it didn't exist before there are orphaned records.
Tables are:
Brokers and it's PK is BID
The 2nd table is Broker_Rates which also has a BID table.
I'm trying to figure out a t-sql statement that will parse through all the recrods in the Broker_Rates table and delete the record if there isn't a match for the BID record in the brokers table.
I know this isn't correct syntax but should hopefully clear up what I'm asking
DELETE FROM Broker_Rates
WHERE (Broker_Rates.BID <> Broker.BID)
Thanks
View 6 Replies
View Related
May 4, 2007
Hi
I have created a linked server from SQL Server 2005 (SP 1) to SQL Service 2000 (SP 4) with a sql server login that is available on both servers but with different passwords and permissions.
I am getting the following error while accessing the linked server in management studio based on the scenario given below ;
------ Error Message Starts
OLE DB provider "SQLNCLI" for linked server "(SQL Server 2000 instance name)" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
Msg 18456, Level 14, State 1, Line 0
Login failed for user 'abc'.
------ Error Message Ends
Consider login name is abc.
Now this login abc has sysadmin rights on sql server 2005.
The same login abc has only db_datareader rights on sql server 2000 on just one database and is not associated with any fixed server role.
I have configured the linked server using the following options;
1. I have tried impersonating login from SQL Server 2005 to SQL Server 2000 .
2. I have also tried specifying remote login / password option.
Anyone having any idea, would be of great help.
Regards,
Salman Shehbaz.
View 3 Replies
View Related
Jul 22, 2007
i did "Linked server" between To Servers , and it's Working.
---------------------------
For Example :
Server 1 =S1.
Server = S2.
i create table in S1 : name = TblS1
i create same table in S2 : name TblS2
and i create trigger(name tr_cpD) From S1 in TblS1 For send data To TblS2 in S2
/****************** trigger Code ***************
CREATE TRIGGER dbo.tr_cpD
ON dbo.TblS1
AFTER INSERT
AS
BEGIN
SET NOCOUNT ON;
insert into [S2].[dbname].[dbo].[TblS2] Select ID,Name from insertedEND
**************************************************
result is :
Msg 7399, Level 16, State 1, Procedure tr_cpD, Line 14
The OLE DB provider "SQLNCLI" for linked server "S2" reported an error. The provider did not give any information about the error.
Msg 7312, Level 16, State 1, Procedure tr_cpD, Line 14
Invalid use of schema or catalog for OLE DB provider "SQLNCLI" for linked server "S2". A four-part name was supplied, but the provider does not expose the necessary interfaces to use a catalog or schema.
how i can execute this trigger
View 5 Replies
View Related
Apr 18, 2007
Can I connect from a SQL Server 2005 database to a SQL Server 2000 database, without establishing a linked server connection.
I need to fire a SELECT query on a SQL Server 2000 database, but don't want to add it as a linked server. Is there any way I can do this or its not possible??
View 1 Replies
View Related
Dec 28, 2005
I have a Sybase Adaptive Server Enterprise server which I need to set up as a linked server in SQL Server 2005. The Sybase server is version 12.5.2, and the Sybase ODBC driver version is 4.20.00.67. I have already installed the Sybase client software on the server.
I also created a SystemDSN on the SQL Server to connect to the Sybase server. I tested the connection and it was able to connect.
I ran the following code to create the linked server:
<code>
EXEC master.dbo.sp_addlinkedserver @server = N'LinkedServerName', @srvproduct=N'Sybase', @provider=N'MSDASQL', @datasrc=N'Sybase System DSN', @provstr=N'"Provider=Sybase.ASEOLEDBProvider;Server Name=servername,5000;Initial Catalog=databasename;User Id=username;Password=password"'
</code>
I then ran sp_tables_ex to make sure I could view the tables in the Sybase database. Here is the error message I get:
<code>
OLE DB provider "MSDASQL" for linked server "LinkedServerName" returned message "[DataDirect][ODBC Sybase Wire Protocol driver]Error parsing connect string at offset 13. ".
Msg 7303, Level 16, State 1, Procedure sp_tables_ex, Line 41
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "LinkedServerName".
</code>
Any ideas what is happening here?
View 10 Replies
View Related
Nov 26, 2007
this is my Delete Query NO 1
alter table ZT_Master disable trigger All
Delete ZT_Master WHERE TDateTime> = DATEADD(month,DATEDIFF(month,0,getdate())-(select Keepmonths from ZT_KeepMonths where id =1),0) AND TDateTime< DATEADD(month,DATEDIFF(month,0,getdate()),0)
alter table ZT_Master enable trigger All
I have troble in Delete Query No 2
here is a select statemnt , I need to delete them
select d.* from ZT_Master m, ZT_Detail d where (m.Prikey=d.MasterKey) And m.TDateTime> = DATEADD(month,DATEDIFF(month,0,getdate())-(select Keepmonths from ZT_KeepMonths where id =1),0) AND m.TDateTime< DATEADD(month,DATEDIFF(month,0,getdate()),0)
I tried modified it as below
delete d.* from ZT_Master m, ZT_Detail d where (m.Prikey=d.MasterKey) And m.TDateTime> = DATEADD(month,DATEDIFF(month,0,getdate())-(select Keepmonths from ZT_KeepMonths where id =1),0) AND m.TDateTime< DATEADD(month,DATEDIFF(month,0,getdate()),0)
but this doesn't works..
can you please help?
and can I combine these 2 SQL Query into one Sql Query? thank you
View 1 Replies
View Related
Feb 16, 2008
I'm using SqlDataSource and an Access database. Let's say I got two tables:user: userID, usernamemessage: userID, messagetextLet's say a user can register on my website, and leave several messages there. I have an admin page where I can select a user and delete all of his messages just by clicking one button.What would be the best (and easiest) way to make this?Here's my suggestion:I have made a "delete query" (with userID as parameter) in MS Access. It deletes all messages of a user when I type in the userID and click ok.Would it be possible to do this on my ASP.net page? If yes, what would the script look like?(yes, it is a newbie question)
View 2 Replies
View Related
Sep 16, 2013
The requirement is: I should allow single row delete from a table but not bulk delete. An audit table should get updated if there is any single delete or single update. So I wrote the triggers as follows: for single and bulk delete
ALTER TRIGGER [dbo].[TRG_Delete_Bulk_tbl_attendance]
ON [dbo].[tbl_attendance]
AFTER DELETE
AS
[code]...
When I try to run the website, the database error I am getting is:Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 0, current count = 1.
View 3 Replies
View Related
Aug 20, 2007
I ran the following query in Query Analyzer on a machine running SQL Server 2000. I'm attempting to delete from a linked server running SQL Server 2005:
DELETE FROM sql2005.production.dbo.products
WHERE vendor='Foo'
AND productId NOT IN
(
SELECT productId FROM sql2000.staging.dbo.fooProductList
)
The status message (and @@ROWCOUNT) told me 8 rows were affected, but nothing was actually deleted; when I ran a SELECT with the same criteria as the DELETE, all 8 rows are still there. So, once more I tried the DELETE command. This time it told me 7 rows were affected; when I ran the SELECT again, 5 of the rows were still there. Finally, after running this exact same DELETE query 5 times, I was able to remove all 8 rows. Each time it would tell me that a different number of rows had been deleted, and in no case was that number accurate.
I've never seen anything like this before. Neither of the tables involved were undergoing any other changes. There's no replication going on, or anything else that should introduce any delays. And I run queries like this all day, involving every thinkable combination of 2000 and 2005 servers, that don't give me any trouble.
Does anyone have suggestions on what might cause this sort of behavior?
View 3 Replies
View Related
Nov 20, 2007
Hi,
I have a problem with one report on my server. A user has requested that I exclude him from receiving a timed email subscription to several reports. I was able to amend all the subscriptions except one. When I try to remove his email address from the subscription I receive this error:
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
For more information about this error navigate to the report server on the local server machine, or enable remote errors
Online no help couldn't offer any advice at all, so I thought I'd just delete the subscription and recreate it again, but I receive the same message. "Okay, no problem, I'll just delete the report and redeploy it and set up the subscription so all the other users aren't affected", says I. "Oh, no!", says the report server, and then it give me this message:
System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.Data.SqlClient.SqlException: Only members of sysadmin role are allowed to update or delete jobs owned by a different login. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.DBInterface.DeleteObject(String objectName) at Microsoft.ReportingServices.Library.RSService._DeleteItem(String item) at Microsoft.ReportingServices.Library.RSService.ExecuteBatch(Guid batchId) at Microsoft.ReportingServices.WebServer.ReportingService2005.ExecuteBatch() --- End of inner exception stack trace ---
What's even weirder is that I'm the owner and creator of the report and I'm a system admin and content manager on the report server and I set up the subscription when the report was initially deployed. Surely I should have sufficient rights to fart around with this subscription/report as I see fit?
I have rebooted the server, redeployed the report, checked credentials on the data source and tried amending and deleting from both the report manager and management studio but still I am prevented from doing so.
Any help would be much appreciated.
Thanks in advance,
Paul
View 3 Replies
View Related
Aug 28, 2014
I was trying to figure out what the OPENQUERY Syntax is to Insert into SQL Server Table from Oracle Linked Server.
View 7 Replies
View Related
Sep 11, 2015
We have oracle linked server created on one of the sql server 2008 standard , we are fetching data from oracle and updating some records in sql server . Previously its working fine but we are suddenly facing below issue.
Below error occurred during process .
OLE DB provider "OraOLEDB.Oracle" for linked server "<linkedservername>" returned message "".
Msg 7346, Level 16, State 2, Line 1
Cannot get the data of the row from the OLE DB provider "OraOLEDB.Oracle" for linked server "<linked server name>".
View 7 Replies
View Related
Aug 30, 2006
I'm trying to link SQL Server 2000 sp3 to SQL 2005 64 bit. I keep getting Error 17 sql server does not exist or access denined. I tried adding remote user mapping and chaning the linked server properties to "Be made using this security context" without any success.
Any help is appreciated.
View 4 Replies
View Related
Aug 27, 2007
I receive the following error message when I run a distributed query against a loopback linked server in SQL Server 2005:
The Microsoft Distributed Transaction Coordinator (MS DTC) has cancelled the distributed transaction.
To resolve this problem, I was told that running a distributed query against a loopback linked server is not supported in SQL Server 2005. And I am suggested to use a remote server definition (sp_addserver) instead of a linked server definition to resolve this problem. (Although this is only a temporary resolution, which will deprecate in Katmai)
However, I run into another problem when I use the remote server definition. I receive the following error message:
Msg 18483, Level 14, State 1, Line 1
Could not connect to server 'ServerNameSQL2005' because '' is not defined as a remote login at the server. Verify that you have specified the correct login name.
Could anyone please help me out?
(I include the reproduce steps for the first error message, followed by my resolution that generates the second error message)
======
Reproduce steps for the first error message
======
On the ComputerAInstanceA instance, run the following statement to create a database and a table:
CREATE DATABASE DatabaseA
GO
USE DatabaseA
GO
CREATE TABLE TestTable(Col1 int, Col2 varchar(50))
GO
INSERT INTO TestTable VALUES (1, 'Hello World')
GO
On the ComputerBInstanceB instance, run the following statement to create a database and a table:
CREATE DATABASE DatabaseB
GO
USE DatabaseB
GO
CREATE TABLE TestTable (Col1 int, Col2 varchar(50))
GO
On the ComputerAInstanceA instance, create a linked server that links to the ComputerBInstanceB instance. Assume the name of the linked server is LNK_ServerB.
On the ComputerBInstanceB instance, create a linked server that links to the ComputerAInstanceA instance. Assume the name of the linked server is LNK_ServerA.
On the ComputerBInstanceB instance, run the following statement:
USE DatabaseB
GO
CREATE PROCEDURE InsertA AS
BEGIN
SELECT * from LNK_ServerA.DatabaseA.dbo.TestTable
END
GO
On the ComputerAInstanceA instance, run the following statement:
USE DatabaseA
GO
INSERT INTO TestTable
EXEC LNK_ServerB.DatabaseB.dbo.InsertA
GO
Then I receive the first error message.
=======
My resolution that generates the second error message
=======
On the ComputerBInstanceB instance, run the following statement:
sp_addserver 'ComputerAInstanceA'
GO
sp_serveroption 'ComputerAInstanceA', 'Data Access', 'TRUE'
GO
USE DatabaseB
GO
CREATE PROCEDURE InsertA AS
BEGIN
SELECT * FROM [ComputerAInstanceA].DatabaseA.dbo.TestTable
END
GO
On the ComputerAInstanceA instance, run the following statement:
USE DatabaseA
GO
INSERT INTO TestTable
EXECUTE [ComputerBInstanceB].[DatabaseB].[dbo].[InsertA]
GO
Then I receive the second error message.
View 1 Replies
View Related
Feb 23, 2015
I have the linked server connection created and works perfectly well. I mean I am able to see the tables while I am on my database.
how do I write a SQL statement to reference the linked server ?
I tried the following:
Select top 100 * from casmpogdbspr1.MPOG_Collations.dbo.AsaClass_Cleaned
Then I get the error message....
Msg 7314, Level 16, State 1, Line 1
The OLE DB provider "SQLNCLI10" for linked server "casmpogdbspr1" does not contain the table ""MPOG_Collations"."dbo"."AsaClass_Cleaned"". The table either does not exist or the current user does not have permissions on that table.
View 2 Replies
View Related
Apr 16, 2015
Using a 32-Bit SQL Server 2008 Express on my LOCAL PC. I downloaded the Advantage 8.1 OLE DB Provider and created a linked server to a REMOTE Advantage 8.1 database server. There is no data dictionary on the Advantage server.
Here is my linked server:
EXEC master.dbo.sp_addlinkedserver @server = N'1xx.1xx.xx.1xx', @srvproduct=N'Advantage', @provider=N'Advantage OLE DB Provider', @datasrc=N'1xx.1xx.xx.1xxeccET', @provstr=N'servertype=ads_local_server;tabletype=ads_cdx;'--tabletype=’ADS_ADT’ (this test works too)
EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'1xx.1xx.xx.1xx',@useself=N'False',@locallogin=Null,@rmtuser='adssys',@rmtpassword=Null
Testing the link succeeds with above. Using “ads_REMOTE_server” instead of “ads_local_server” and the test fails. Here is my problem, using the following queries will not work. Perhaps it’s a permissions issue? When I specify my local credentials for the remote server in the linked server it still does not work.
SELECT * FROM OPENQUERY([1xx.1xx.xx.1xx], 'SELECT * FROM ActType')
OLE DB provider "Advantage OLE DB Provider" for linked server "1xx.1xx.xx.1xx" returned message "Error 7200: AQE Error: State = HY000; NativeError = 5004; [Extended Systems][Advantage SQL][ASA] Error 5004: Either ACE could not find the specified file, or you do not have sufficient rights to access the file. Table name: ActType SELECT * FROM ActType".
Msg 7321, Level 16, State 2, Line 2
An error occurred while preparing the query "SELECT * FROM ActType" for execution against OLE DB provider "Advantage OLE DB Provider" for linked server "1xx.1xx.xx.1xx".
View 0 Replies
View Related
Sep 4, 2015
A recent SharePoint upgrade has rendered several views obsolete. I am redefining them so that our upper level executive reports show valid data.(yes, I know that doing anything to sharepoint could cause MS to deny support, having said that, this is something I've inherited and need to fix, pronto) The old view was created like so:
USE [AHMC]
GO
/****** Object: View [dbo].[vwSurgicalVolumes] Script Date: 09/04/2015 09:28:03 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE VIEW [dbo].[vwSurgicalVolumes] AS
SELECT
[code]....
As I said, this view is used in a report showing surgical minutes.SharePoint is now on a new server, which is linked differently (distributed?) I've used OPENQUERY to get my 'new' query to work;
SELECT *
FROM OPENQUERY ([PORTALWEBDB], 'SELECT
--AllLists
AL.tp_ID AS ALtpID
,AL.tp_WebID as altpwebid
,AL.tp_Title AS ALTitle
[code]....
My data (ie surgical minutes, etc) seems to be in the XML column, AUD.tp_ColumnSet . So I need to parse it out and convert it to INT to maintain consistency with the previous view. How do I do this within the context of the view definition?Here is a representation of the new and old view data copied to excel :
<datetime1>2014-08-14T04:00:00</datetime1><float1>2.000000000000000e+000</float1><float2>4.190000000000000e+002</float2><float3>1.600000000000000e+001</float3><float4>8.110000000000000e+002</float4><sql_variant1 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes"
[Code] ....
can't format it to make it look decent. InHouseCases =2, InHouseMinutes=419, OutPatientCases =16, OutPatientMinutes=1230. This corresponds to the new data I can see in the XML column; 2.000000000000000e+000 is indeed 2 and 4.190000000000000e_002 is indeed 419.
View 4 Replies
View Related
Oct 4, 2007
I have an Excel sheet that is dynamically updated (through DDE) and I want to import this data to a table in SQL Server 2005. Using SQL Server Management Studio to configure an Excel data source as a linked server.
(http://support.microsoft.com/kb/306397/EN-US/)
Following the first 5 steps should let me acces the table (but I cannot view the data in SQL Server 2005). However, I could not find how to export the data into an existing table. Does anyone know how or can give a pointer to document describing how to do this?
View 8 Replies
View Related
Jun 29, 2007
Hi,
I have a msaccess linked server that I use to execute sql 2000 stored procedures from a front end in adp (access data project) format without any problem, if it is used on the same machine where the sql server resides (with any user logged on). In any other machine on the local network where I also need to use it, I get an ole/db error message saying that the microsoft jet database engine can not open the file because it's allready opened exclusivly or because it do not has permissions. I created the linked server with both UNC and normal path with the same result.
Thank's for all the help/clues you can give me.
View 4 Replies
View Related
