Deleted Project - Recovery
May 19, 2008
I moved my projects off of the C drive and onto a larger drive a few months back. I discovered recently, like a lot of us have unfortunatly in the past, that we are not pulling a backup of the drive I put the projects on. While going back through some old stuff on the C drive, I deleted a project inside the old Projects folder. This was a mistake because it was a project that is in use. The report still runs fine, but when I went to edit one of the reports in the project, much to my dismay, the project could not be found. I have a txt file of every SQL script that I wrote to create these reports, but am wondering if there is any way to salvage the reports from somewhere on the system so I don;t have to rebuild them?
View 7 Replies
ADVERTISEMENT
Oct 12, 2015
I've got log shipping set up, and everything seems to be working fine, but the log files are not being deleted from the primary server despite configuring log shipping to retain them for 3 days. Â I see no errors concerning the log shipping, but did not configure a monitor. What process is responsible for deleting the older log backups, and how can I look for errors. Â I could simply set up a jog to delete the older files, but that will only mask the issue.
View 3 Replies
View Related
Jul 8, 2015
I am in problem that I have delete data in my production table.
Now how to retrieve it?
I have only Yesterdays Full and Transaction Backup files.
I used the following query for deleting all data.
delete from t1;
View 7 Replies
View Related
Aug 21, 2015
Can the deleted records be recovered in Simple Recovery model database? Are the delete logs present there?
View 3 Replies
View Related
May 29, 2008
For some reason in a Team Foundation Team Project that has multiple project types (SSRS, SSIS, WebSite, C# Business DLL...), the SSIS project makes itself the startup project to the team project. If I explicitly set another project as the startup project to the team project and then select an SSIS package in the SSIS project in the team project, the SSIS project becomes the startup project automatically.
I am using Visual Studio 2005 SP1.
View 3 Replies
View Related
Jun 24, 2007
Hi,
I have been working on some SSIS packages for a while now and today while i was working i was trying to create a new connection and in the process there was an error and it said the BIDS has to be closed and i closed it but later when i open BIDS and try to open my project(.sln) from the file menu to work on the half done package it pops up an error which shows the path to my project location on the first line and next statement on the pop up error box says:
"Make Sure the application for the project type (.dtproj) is installed."
I tried to check some forums in which some suggested to try installing SP1 which i tried but ..i dont know why but the SP1 fails to install (i dont know if its causing problem becoz i already installed SP2 as i had some other problem before for which the cure was to install SP2).
Did anyone here face such a problem before ?
I'd really appreciate if the experts here can tell a cure for this problem.
thanks,
Ravi
View 4 Replies
View Related
Feb 23, 2007
I have a Visual Studio 2005 solution which contains a Sql Server Integration Services (SSIS) project.
In this solution I have explicitly set a Web application project as startup project, but whenever I edit a DTS package within the SSIS project, VS automatically sets the SSIS project as startup project and the package I edit as startup object.
Needless to say, this may cause some really unwanted incidents when running the solution - thinking that you're about to run the Web application project (that was explicitly set as startup project), but instead, you run the edited package in the SSIS project.
Is there any way to avoid having the SSIS project automatically setting itself as startup project, any workaround here at all? :)
Thanks.
View 4 Replies
View Related
Jun 16, 2015
in order to maintain a deployed project into an Integration Services Catalog I'd like to know if it is possible to import it into a new project inside SSDT.
View 5 Replies
View Related
May 6, 2007
Hi,
I want to update value of a custom field for a perticular project in Project Server 2007 using PSI.
I have created 5 enterprise custom fields(A,B,C,D,E) through PWA/Server Settings.
I want to search all Projects on Server. If any project is having value for custom field A then I want to update rest of the custom fields(B,C,D,E) for that perticular project.
I dont know how to do it please help.
Thanks in Advance
Madhukar
View 5 Replies
View Related
Feb 3, 2007
I have a very small project written in VB.Net 2005 using the SQL Server 2005 SSiS DTSx package.
I took a SQL Server 2000 dts package and using the SQL Server 3005 legacy tools migrated it so I could still use the package withing SQL 2005 until I can build one using BI/SSIS.
Anyway,I added the reference Microsoft.SqlServer.ManagedDTS so I could then use the Microsoft.SqlServer.Dts.Runtime so I can execute the commands:
Dim oApp As New Application
Dim oPkg As New Package
oPkg = oApp.LoadPackage(g_DTSx_Directory & "AOC copy Generic1 CSV to AOC_verify_file_1.dtsx", Nothing)
Dim oResults As DTSExecResult
oResults = oPkg.Execute
Ok. That works fine. Executes without a hitch. So now I try and create a setup project for this and I use the setup wizard.
During the creation of the setup project I get a message that states:
The following files may have dependencies that cannot be determined automatically. Please confirm that all dependencies have been added to the project.
C:windowssystem32msxml6.dll
OK. The dll is part of the reference I mentioned above and I have no idea what other dependencies it may have.
How do I find this out?
Has anyone else created a project like this and experenced the same?
I am on a clean build running WinXP Pro with SP2 - VS2005 with SP1 and the SQL Server 2005 tools.
View 1 Replies
View Related
Apr 20, 2015
I've got an SSIS solution file with project deployment model in VS 2013 and would like to deploy that to SSISDB on different environments.All these days I followed the regular way to create a project in SSISDB and deploy it to that. Now want to find out if i can automate this process and so got some questionsÂ
1. Can we automate the process of creating a project on SSISDB based on our SSIS project name? This will be like when we do a deployment it should check if the project exists or not on SSISDB based on our SSIS project name, if the project exists we just deploy the packages in the project and if the project does not exists in SSISDB it will create that project and deploy the packages.
2. Can we also automate the process of creating environments? In traditional way we manually create the environment variables under environment tab of SSISDB, but can we make that also as part of deployment? Like when we are releasing to Dev server we look if that particular Dev variable exists on that server, if it exists we just update the existing stuff and if it does not exists we just create it.
View 2 Replies
View Related
Mar 31, 2008
I have visual studio 2005 and sql server 2005 with integration service installed on my machine. Couple of days ago, I installed visual studio 2008 professional. When I go to create SSIS project I dont see it in visual studio 2008. What do I have to do to make it appear in visual studio 2008 so that I can create SSIS projects.
Thanks.
View 7 Replies
View Related
Jul 23, 2007
I fail to use project professional 2003 to access to the project server 2003 using MSDE 2000 in local area network, following message was shown,
Connection failed:
SQLState: '01000' SQL Server Error 1326 [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect())
Connection failed:
SQLState '08001'
SQL Server Error: 17
[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.
I have seen these pages with similiar cases but can't help.
http://support.microsoft.com/kb/818047/
http://support.microsoft.com/kb/837653/en-us
Can anyone help me?? Thanks a lot!
View 1 Replies
View Related
Mar 13, 2008
Hi all How can create trigger in sql server project in VB.NET 2.0 ?thanks in advance
View 1 Replies
View Related
Aug 17, 2015
We have a requirement to build SQL environment which will give us local high availability and disaster recovery to second site. We have two sites- Site A & Site B. We are planning to have two nodes at Site A and 2 nodes at Site B. All four nodes will be part of same Windows failover cluster. We will build two SQL Cluster, InstanceA will be clustered between the nodes at Site A Server and InstanceB will be clustered between the nodes at Site B, we will enable Always On Between the InstanceA and InstanceB and will be primary owner where data will be written on InstanceA and will be replicated to InstaceB. URL....Now we want we will have instanceC on the Site B and data will be writen from the application available on Site B, will be replicated to the instance on the Site A as replica.
View 6 Replies
View Related
Dec 23, 2014
is bulk logged recovery model support point in time recovery
View 9 Replies
View Related
Sep 17, 2015
Pages on a full recovery model database corrupted, need to ensure data loss is minimal for restore operation am thinking about restoring the latest full backup.
View 4 Replies
View Related
May 5, 2015
in the process of migrating a big db from server 1 to server 2, we had to roll back the change. I started with taking a full db backup and restoring it on server 2 with norecovery, and then a couple logs with norecovery, and then the last log with recovery.
Is there some way to continue this chain now, I mean to change the db to norecovery, or other way to restore logs.Â
I dont want to do a new full backup.
If I try to do a log restore now i get the message:
Msg 3117, Level 16, State 4, Line 1
The log or differential backup cannot be restored because no files are ready to rollforward.
Msg 3013, Level 16, State 1, Line 1
RESTORE LOG is terminating abnormally.
View 6 Replies
View Related
Sep 19, 2015
We have 3 replica AG setup. 2 replicas are in sync/automatic failover, the other(DR Server, different subnet) in asynchronous/manual mode…All these replicas were on sql server 2012, Recently we upgraded DR server to 2014. Since then we have a problem, the AG databases in 2014 instance went into ‘Synchronizing/ in recovery’ state…The SQL server error log has message, the recovery couldn’t start for the database ‘XYZ’…We tried to create a new database and add it to AG , it works for fine for other two 2012 replicas, but on 2014 we see the same issue
View 3 Replies
View Related
Jan 12, 2007
Howdy again...
Do I need to re-create a new package from scratch after doing what I did?
It seems I've made what is probably a typical newbie mistake: I used COPY/PASTE
to
consolidate containers from two packages into a single new project/package.
Now my new package generates multiple duplicate errors (23 of each...) whenever I open it:
Warning loading LoadBillingData.dtsx: Process configuration failed to set the
destination at the package path of "PackageData Flow Task to Load
Profiles, Versions, and
Transactions.EventHandlers[OnError].Variables[System::Propagate].Properties[Namespace]".
This occurs when attempting to set the destination property or variable fails.
Check the destination property or variable.
Error loading LoadBillingData.dtsx: Changing the name of a variable failed
because it is a system variable. System variables are read-only.
What happened:
new guy (goes without saying...) creates:
01. PROJECT A
02. add PACKAGE
A to PROJECT A
03. add some
containers, figger out what the heck is going on, get containers working
04. create
PROJECT B
05. create
PACKAGE B
06. add
containers, they work fine
07. whoops!
Want to consolidate the packages. Unix guy naively expects Bill has made MS
Visual Studio like all windows products (of which newbie is aware€¦):
08. create
PROJECT C
09. create
PACKAGE C
10. <ctrl
a> PACKAGE A
11. <crtl
c> PACKAGE A
12. <ctrl
v> PACKAGE C
13. <ctrl
a> PACKAGE B
14. <crtl
c> PACKAGE B
15. <ctrl
v> PACKAGE C
16. copy Flat
File Connection Managers
17. copy
Database Connection Manager
18. drag the
arrows around, fix the flat file sources, renew the column maps, etc
19. whoops! the
connections all look like a registry number! Fix the OLE DB Destinations,
Execute SQL Task containers by selecting the DB Connection Manager copied from
PROJECT A
20. successfully
execute PROJECT C/PACKAGE C
21. save all
22. exit
23. start MS
Visual Studio
24. Open
Solution
25. ERRORS!!!
Is this fixable?
Thanks,
Bill
View 1 Replies
View Related
Jan 17, 2008
Hello,
I've created a Report Model Project that can be used by Report Builder to generate ad-hoc reports. I'm trying to create a connection string in my Report Server Project that points to the Report Model Project data source view.
All I can do is create a regular datasource, which bypasses the metadata contained in the Data Source View.
Basically I want my Report Server Project and my Report Builder reports to leverage the same metadata. Is this possible? If so how do I get the connection string?
Thanks!!
-Matt
View 1 Replies
View Related
Nov 1, 2015
We have an issue with a 3 node SQL 2012 Always on availability group. Normal operation is node 1 (primary replica) with node 2 and node 3 as secondary replicas.After some patching, SQL wasn't running on node 1 hence the AG flipped over to node 2. This went unnoticed for some time and the transaction log for one of the AG databases became full on node 2 and node 3. (I think this is because it couldn't commit the transactions on node 1 so couldn't truncate it's t-log?) The DB is using synchronous replication btw.So I started SQL on node 1 and flipped the AG back to node 1 (with a data loss warning but I accepted this).Now the issue is that on node 2 and 3, the DB in question is stuck in a "Reverting / In Recovery" State. I've tried various commands such as ALTER DATABASE SET ONLINE, RESTORE DATABASE WITH RECOVERY etc but these fail stating unable to obtain a lock on the DB.
The weird thing is that on node 1 the state of the DB is "synchronised".how to resolve this issue on node 2 and 3? I've left them overnight (in case they were rolling back transactions, the DB is fairly large) but nothing seems to have happened. remove the DB from the AG in node 2 and 3 and add it back in again, ie recreate the replication?
View 2 Replies
View Related
Jul 1, 2006
Hi All,I've been struggling with this for hours...Could someone please advise me on how to convert my current File based SQL Server Express website to a Server based SQL Express one.Particularly interested in what I need to do in the SQL Express management tool, changes I need to make the projecvt itself and changes needed to get IIS to understand things have been changed.Thanks,Martin.
View 1 Replies
View Related
Sep 10, 2015
If you are doing a disaster recovery of an entire SQL 2005 cluster, can you just install SQL server and restore the system database to get the configuration?
View 4 Replies
View Related
Sep 27, 2007
I just did the dumbest thing ever. I think I have lost my database. i was trying to attach a different db with the same name. but it wasnt able to attach so the i renamed my current db and attached the new db.i dont know what has happened but my old db has been deleted and i cant find it the mdf file for it.... that has been removed for the directory it was in too!! I was using MS SQL Server Managemnent Studio can I undo this somehow?? PLEASE HELP
View 14 Replies
View Related
Dec 11, 2000
Is it possible to know that who has deleted the database
Thanks in advance
View 2 Replies
View Related
Jan 21, 2005
Our past CIO deleted a SQL Server database because he didn't know what it was or if we needed it. Guess what we do! We were able to undelete the backup files but when we try to restore from it we get the error "No a valid backup" Any ideas?
Thank you for any help. :eek:
View 2 Replies
View Related
Jul 25, 2006
I am running sql server 2000 on windows 2000. i have my backups set to delete after a week. they are not deleting, can anyone tell me why this is happening?? the backups filled the hard drive.
View 3 Replies
View Related
Sep 20, 2007
I am currently trying to recover a data base that i detached. I have search the computer with *.mdf with out results...
I detached the database from msde 2000 and then installed sql express now when i go to attach the db it is missing, is there away i can recover the db?
View 8 Replies
View Related
Apr 18, 2007
Is there anyway to retreive deleted data (rows) of a table? Unfortunately the backups are corrupt so we can't do a restore.
Thanks
View 12 Replies
View Related
May 18, 2007
Hi,
I accidentaly deleted a package while working on it, intention was to delete another package just above it in solution explorer but the one i was working on got deleted, is there any way to retrieve it...??
any suggestion wud be appreciated.
thanks,
ravi
Nothing much that i can do..!!
View 5 Replies
View Related
Jul 23, 2005
I am runnnig Microsoft SQL Server 2000 and have a database that getsdownloaded everymorning from an ftp site. This download contains thenew records and any changes to existing records. However I am runninginto a problem in that I am forced to recreate the views over everytimewe replace the new database with the old one. I've tried restoring thedatabase as well as replacing it and am not sure what I am missing. Iam new to SQL Server and any help would be greatly appreciated.
View 4 Replies
View Related
Jul 20, 2005
Any ideas how I can recover a job that has been deleted (?) from SQL7.0 ? We had one which was used on a regular basis which has nowceased to exists. I've spoken to the people responsible for the serverand was met by blank faces (as usual). They have no idea when it wasdeleted, by whom or when. To make matters worse, they don't think theycan get it off the backup set without a major bit of work to theserver. Suprisingly, none of the users noticed that things had stoppedworking.Unfortunately, I needed to do some work on this in preparation for mymonthly meeting with my boss on Monday. Whilst I'm not to blame, I'dlike to understand a little more about any options available to us forrecovery as he will undoubtedly ask when he finds out.I have an old back up on another server, so it's not the end of theworld re-creating it, but I was under the impression it was backed upproperly. Is this normal or have they missed something ?Are there any ways I can recover this ? What can I get done to thebackup to make sure this is backed up properly ?Thanks in advance.Ryan
View 1 Replies
View Related
