SSRS report uses an SSIS package as input and is launching an old and deleted version of the package from the MSDB SQL Server store.
Rebooting the server makes the problem go away: correct package is found after the reboot.
Symptoms:
1) Package is first deleted from SQL Server MSDB package store.
2) Report that uses this package is run and expected package not found error occurs.
3) Revised package is imported into the SQL Server MSDB package store.
4) Package is run directly from SQL Server Management Studio. Revised package runs.
5) Report that uses package is run and the old package that was deleted in step 1 above runs.
Is there some reporting service caching of SSIS packages going on here? Is there a way to get around this without having to reboot the server?
I'm trying to call a SSIS package as my data source for SQL reporting service but I keep getting the error "Cannot create a connection to data source 'DsSSIS'.
My DsSSIS consists of the following in the connection string.
I have an SSIS package. It updates a table in SQL Server 2005 database. There is another SSRS report that presents my final table and I run it and export it into Excel.Is it any way after SQL Query task and Store procedures are being finished in my SSIS package, I add another object to run my SSRS report and export it to Excel format?
It's been a while since I post here. Anyway, I'm trying to call a SSIS package as my data source for SQL reporting service but I keep getting the error "Cannot create a connection to data source 'DsSSIS'.
My DsSSIS consists of the following in the connection string.
Need some clarification on calling an SSIS package from SSRS. I have managed to get this to work, but only if I actually build the SSIS package on the report server machine.My SSIS package is very simple it. The control flow is a single data flow task. Within the data flow task is an ole db data source and a data reader destination. I verified that the package works in BIDS.  If I build it and deploy it on the report server I can execute it just fine from integration services (using the dtexec UI panel) in SSMS, no validation errors and no execution errors.If I try to build a dataset (specifying SSIS as the data source type) then immediately on referencing the package I get a "Package failed to validate error". However, if I bring the whole project over to the report server and build it then I can reference it from my Report Services project.  I'm using package deployment security of "Don't Save Sensitive" for the SSIS package with the 'sa' login. After the deployment package is built I edit the connection string to include the password.The remote execution account for the Report Server is set to the administrator of the box. I know these account permissions are overkill, but I'll iron all that out once I get the basic pieces in place and working.
How do I pass a parameter from a SSRS report to the sql stmt in a SSIS package? Mainly need to know the correct syntax of the connection string to use for the datasource in the SSRS report. Every time I add the /SET part of the string the connection breaks. The connection string i've been using is: /file "C:\PackageName.dtsx /Set Package.Variables[StartDate];"&Parameters!StartDate.Value
How do I pass a parameter from a SSRS report to the sql stmt in a SSIS package? Mainly need to know the correct syntax of the connection string to use for the datasource in the SSRS report. Every time I add the /SET part of the string the connection breaks. The connection string i've been using is: /file "C:\PackageName.dtsx /Set Package.Variables[StartDate];"&Parameters!StartDate.Value
I am using SSRS 2012 RC0 in Visual Studio 2010 sp1 to build this tabular report. I had inadvertently removed the initial header row from my tablix before adding numerous nested groupings to move the column headers to the header section so they would show up on each page.
I would like to reverse that decision, but I seem to be unable to now re-add that header row back to my tablix. In older versions of SSRS, I was able to right click on the table and then click on insert row-->Header row but that does not seem to be possible in ssrs 2012.. I tried adding a outer row to my top most grouping, but that option was grayed out.
One of the developers accidently deleted a package from a SQL Server 2000 server. I restored the selected dts package record from an old msdb backup and restored it on the current msdb. Now when I open the error i receive an error
"No data for the specified package was retrieved from the specified server SQL Server"
Hi, I have a question about sql server trigger. For example, I have a trigger for table insert. The way it works is: A: my program run the insert query, and wait, then the record is inserted, then the trigger is launched, after the trigger job done, my program then return, or B: my porgram run the insert query, and wait, then the record is inserted, then my porgram returns, then the trigger is launched. Basically, my program does not have to wait the trigger job done. Which way is right? or neither one is right. The problem we are facing right now is, we need to run a pretty big stored procedure and it takes a long time. I am thinking about move some of them to a trigger job, so our porgram don't have to wait for everything done. Any inputs are welcome. Thanks.
I'm having my website hosted with webhost4life.com which is very helpful and a really great company if you are using Visual Web Developer with SQL Express. The question I have for anyone who can help me is that my site will offer member roles for customer account maintenance with login and the works. As you know, when you use memberships with Visual Web Developer, it associates all these controls with a database called aspnetdb.mdf. And you maintain this database through the asp.net configuration control. Once this database is launched, I've learned how to access it by changing my web.config file removing the LocalSQLServer and adding one with the connection string to the aspnetdb.mdf database on the server. My question is, once I've done this and connected through that string, can I still use the asp.net configuration to edit the database (e.g. the users, roles, etc)?
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
I am trying to use SSIS to upsize Visual FoxPro data. The data is in free tables. I'm using the VFP OLE DB provider in a connection pointed at a folder. When I click on preview, I see the right data--deleted records are not included. However, when I run the package, the deleted records are sent to SQL Server 2005. I can pack all the tables prior to executing the package as a work around, but I would think I shouldn't have to. I don't see any way to detect which records are marked for deletion in the data flow. I've tried to specify in the connection string Deleted=Yes, but to no good effect. Also, as I mentioned, when I preview the data, the deleted records are not included, so the connection seems to work properly . Steps to reproduce: In VFP:
CREATE TABLE Test (Field1 N(1))
INSERT INTO Test (Field1) VALUES (1)
INSERT INTO Test (Field1) VALUES (2)
GO TOP IN Test
DELETE
In SQL Server:
CREATE TABLE Test (Field1 Numeric(1))
In Visual Studio SSIS:
Create connection object using VFPOleDB provider pointed to the folder with the Test.DBF.
Create a connection object to SQL Server 2005 pointed to the database with the test table.
Create a DataFlow task with the OLE DB Source and the SQL Server destination. When you preview the Source object you will see just one record, but when you execute the package, you see 2 records transferred and 2 records are actually in SQL Server. Seems like a bug.
Can you help me to resolve my problem ? I have to do a simple daily backup system. Source : Flat File; Destination : SQL Server. I want to use the Slowly Changing Dimension component to backup only the new and updated row from my source (Flat File) and put them into SQL Server.
But how can I do to detect deleted rows from my source ?
Any suggestions ?
If it's not clear enough, please ask for more details !
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
I would like to standardize SSIS development so that developers all start with the same basic template. I have set it up so it is an available template ( http://support.microsoft.com/kb/908018 ) but I would like it to be the default when a new project or package is created. Is this an option?
I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
The master package has a configuration file, specifying the connect strings The master package passes these connect-strings to the child packages in a variable Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s. We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.
The package is run from the file system, through a job-schedule.
We experience the following when running on a not default sql-server instance (called dkms5253uedw)
Case 1: The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.
The master package then executes the first child package. We then in the sysdtslog get:
Error - €œcannot connect to database xxx€? Info - €œpackage is preparing to get connection string from parent €¦€?
The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.
Case 2: When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.
Case 3: When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.
Case 4: When we then stop the sql-server on the default instance, the package faults again, this time with
Error - €œtimeout when connect to database xxx€? Info - €œpackage is preparing to get connection string from parent €¦€?
And the continues as in the first case
From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).
We have tried delayed validation in the packages and in the connection managers, but with the same results (error).
So we are desperately hoping that someone can help us solve this problem.
I am interested in Passing value from a child Package variable to the Parent package that calls it in ssis.
I am able to call the Child package using the execute package task and use Configurations to pass values from the parent variable to the child, but I am not able to pass the value from the child to the parent.
I have a variable called datasetId in both the parent and child. it gets computed in the child and needs to be passed to the parent...
Deployed Report having SSIS package as source do not work when Indirect Package configuration is used in ETL package. It seems ETL package when called/executed from Report manager does not recognize environment variable to pick up the dtsconfig file.
The Report works when Direct package configuration is used to same dtsconfig file.
What could be the reason? Any solution for this? This will cause our build/deployment to QA and Prod very difficult.
I now have two SSIS package, "TESTING" and "LOADING". The "TESTING" package have an execute package task that call the "LOADING" package. When I want to execute the TESTING package, how can I setup the connection string so that I can edit the password of the database connected by the "LOADING" package?
I have two SSIS packages in a project, one calling the other. The parent package works fine in my local mechine. After they are deployed to the production, I schedeul jobs to run the packages in the SqlServer. The child package works fine if I run it alone, but the parent package could not find its child package if I run the parent package . As I checked, all xml config files and the connection string pointing to the child package were set correctly. It seems the parent package did not use the xml config file. Can someone help me? Thanks in advance.
I have successfully created a SSIS package which execute a DTS 2000 package and with no problem to execute the task. But I failed to schedule this package. I was not success in setting the logging. When running the package in command line:
dtexec file "C:Documents and SettingslyangMy DocumentsVisual Studio 2005ProjectsTraingDTSTraingDTSDTSTraining.dtsx"
Error: 2008-03-24 08:03:24.36 Code: 0xC0012024 Source: Execute DTS 2000 Package Task Description: The task "Execute DTS 2000 Package Task" cannot run on this edit ion of Integration Services. It requires a higher level edition. End Error Warning: 2008-03-24 08:03:24.38
Code: 0x80019002 Source: DTSTraining Description: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the M aximumErrorCount or fix the errors. End Warning DTExec: The package execution returned DTSER_FAILURE (1).
I am making use of the DtUtil tool to deploy my package to SQL Server. Following is my configuration: 32-bit machine and 32-bit named instance of Yukon.
I have some package variables which need to be set in the code.
Previously I did it as follows:
Set the package variables in the code. For example:
Here the package was successfully deployed and when i open those packages using BIDS, I am able to see that the variables are set to the values as doen in teh code.
Because of oen problem I am not using SaveToSQLServer method. So I switched to DTUtil tool. Now I am doing it this way:
Set the package variables as before. Deploy the package to SQL Server using DTUtil tool.
Now is the problem: The package is successfully deployed. But the variables are not set to the value that I have specified in the code.
I also tried DTexec utility to set the package variable. Even that does n't work. Can anyone help me out? Is there any alternate method to set package variables?
when i run the job using network service account credentials job is failing. But when i run the package individually, it is tasting success. when it runs as job, this is the error message i am getting
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I have changed to 32-Bit run time and ran the excel package, even then it is failing...i tried to use my credentials (i am admin on the box), even then it is failing...please suggest
I want to achieve the following in (SSIS/SSDT for SQL 2012) -Â
I have a generic SSIS package which simply sends out email notifications using SMTP email task (this package is within its own project, and has project level input parameters).
I need to be able to call this package in the Event handler section of every package (numbering in about less than 60) that we have. These packages are within their own respective projects.
I thought I could use the "execute package task", but it turns out , using this, I cannot call a package that is part of some other project. I also cannot call a package that is stored in the CATALOG. Is there any way I can do this ?
When I call the child package , I should be able to send in parameters like - error information and package name of the Parent package.
I have an SSIS package (TransAgentMaster) that I recently modified to include a call to a child package via the file system. The child package creates a text file. When I run the package in dev studio then the child package/text file is produced.
I then imported the TransAgentMaster as a stored packagesfilesystem package into SQL SSIS and executed the package. The child package produced the text file.
I then ran the SQL Server Agent to see if the child package would work and it did not generate the text file. Thus after updating a SSIS package importing the package into SSIS the job that calls the package will not call the child package. Please not that the TransAgentMaster package calls 7 children packages €¦ just not my new one.
Any thoughts why the agent will not run the child newly crated childe package?
Dear Friends, I store several configurations in the main database of my SSIS packages. I need to get the servername from a xml or txt file in order to get those configurations stored in my database. How you think is the better way to do that? Using a FlatFileSource to read the file and a script to save the value into a SSIS variable? Using the package configuration I cant do that... maybe I dont know, but I can save the SSIS variale in the configuration file, but what I need is to do the inverse, read the configuration file and save the value in the SSIS variable. How the best way you suggest?! Regards!! Thanks.
