Deleting Data By Comparing To Another Table
Jul 20, 2005
I have an entry form allowing customers to enter up to 15 skus (product
id) at a time, so they can make a multiple order, instead of entering
one sku, then submitting it, then returing to the form to submit the
second one, and so forth.
From time to time, the sku they enter will be wrong, or discontiued, so
it will not submit an order.
Therefore, when they are done submitting their 15 skus through the order
form, I want a list showing them all of those skus that came back blank,
or were not found in the database.
I'm doing this by creating two tables. A shopping cart, which holds all
the skus that were returned, and a holding table, that holds all the
skus that were submitted. I want to then delete all the skus in the
holding page that match the skus in teh cart (because they are good
skus) which will then leave the unmatched skus in the holding table.
I'll then scroll out the contents of the holding table, to show them the
skus that were not found in the database.
(confused yet?)
So what I want to do is have some sql that will delete from the holding
table where the sku = the sku in the cart. I've tried writing this, but
it dosn't work.
I tiried this delete from holding_table where sku = cart.sku
I was hoping this would work, but it dosn't. Is there a way for me to do
this?
Thanks!
Bill
*** Sent via Developersdex http://www.developersdex.com ***
Don't just participate in USENET...get rewarded for it!
View 2 Replies
ADVERTISEMENT
Aug 27, 2007
Hi all
I have a customer table with a postcode and a suburb fields and cutomer info which is manually entered by data entry people...
I am trying to compare the entries against a postcode table with the correct postcodes which have fields postcode and suburb and based on the postcode entered in the customer table it should be the same as the suburb in the postcode table, if they are not the same output them to a table for manual checking..How would I go about this
thanks
View 5 Replies
View Related
Jul 20, 2005
I'm trying to come up with an elegant, simple way to compare twoconsecutive values from the same table.For instance:SELECT TOP 2 datavalues FROM myTable ORDER BY timestamp DESCThat gives me the two latest values. I want to test the rate ofchange of these values. If the top row is a 50% increase over the rowbelow it, I'll execute some special logic.What are my options? The only ways I can think of doing this arepretty ugly. Any help is very much appreciated. Thanks!B.
View 22 Replies
View Related
Mar 9, 2007
I have a table where I want to delete some data from but I get this error.
You might have a record that has a foreign key value related to it, or you might have violated a check constraint.
What to do????
View 1 Replies
View Related
Mar 13, 2014
Is this close to the correct syntax for a stored procedure for deleting all the data from a particular table... or is there a better way?
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE TruncateTmpBank
[Code] ....
View 3 Replies
View Related
Jan 20, 2014
I have to delete a ton of data from a SQL table. I have a unique identifier called the version. I would like to use if not in these versions then delete. I tried to using the statement below, but learned the hard way that it created an error this is the message I got....
Msg 9002, Level 17, State 4, Line 3...
The transaction log for database 'MonthEnds' is full due to 'ACTIVE_TRANSACTION'.
I was reading about truncate, I am not sure how I would do this or how I would setup the statement.
Delete Products
where versions were not in (('48459CED-871F-4971-B888-5083990332BC','D550C8D3-58C7-4C74-841D-1C1675F19AE3','C77C7817-3F04-4145-98D3-37BB1610DB35',
'21FE83FA-476D-4604-80EF-2ED57DEE2C16','F3B50B81-191A-4D71-A406-011127AEFBE1','EFBD48E7-E30F-4047-909E-F14DCAEA4181','BD9CCC41-D696-406B-
'C8BEBFBC-D362-4D0F-A555-B281FC2B3023','EFA64956-C2CF-41FC-8E21-F060597DAFCB','77A8DE56-6F7F-4490-8BED-AA6809B947EF','0F4C1E5F-B689-4DCB-
[code]....
View 2 Replies
View Related
Feb 13, 2008
Hi gurus,
The data is automaticaly deleting from one perticular table at every night from last week onwords. I have created a delete trigger to find it out. But Nothing was recorded. There is no jobs except maintainance plans. Nothing in event viewer too. The database recovery model is simple. How can i solve this problem
Please advise me to solve this problem
Thanks
Krishna.
View 11 Replies
View Related
Mar 20, 2008
Hi Everybody,
Kindly let me know if there is a way of deleting data from primary table without deleting data from its corresponding foreign key table.
Thanks & Regards
View 2 Replies
View Related
May 30, 2006
I can run a select to retrieve data using a prefix 'a' for the specific table involved. However when I try to run a delete using the same criteria it fails telling me
Msg 102, Level 15, State 1,.......Line 1
Incorrect syntax near 'a'
The Select statement looks like:
select count(*) from schema.table a where a.customer_id=1234
The Delete looks like:
delete from schema.table a where a.customer_id=1234
What am I doing wrong here? and how can I prefix the table, because the command I want to run is much more complicated than the example above and it needs the prefix
View 3 Replies
View Related
Aug 9, 2007
Hi
i have to delete the master table data without deleting the child table records,is there any solution for this, parent table has relation with the child table.
regards
vinod.t.v
View 9 Replies
View Related
May 18, 2001
I need to delete data from a particular table which has more than half a million records. The data needs to be deleted is more than 200,000 records from the table. What is the best way to delete the data from the table other than importing into a temporary table and performing the same operation?
Let me know if the strategy to be followed is okay.
1. Drop all the triggers
2. Drop all the indexes
3. Write a procedure with a loop setting ROWCOUNT to 1000 and delete the records. ( since if I try to delete all the rows it will give timeout error )
The above procedure will delete 1000 records for each batch inside the loop till it wipes out all the data for the specified condition.
4. Recreate Indexes and Triggers.
Please let me know if there are any other optimal solution.
Thanx,
Zombie
View 2 Replies
View Related
Mar 16, 2004
I have a huge table with 4 primary keys on it. I need to delete the data from this table ( approx. 5.6 millions records to be deleted). It takes a hell lot of time to delete it by normal query.
Can someone please suggest me a better way?
Any help will be appreciated.
View 14 Replies
View Related
Jul 20, 2006
We are using SQL Server 2000 Standard ed, sp4 on Server 2000 Advanced.We have one table that is three times as large as the rest of the database.Most of the data is static after approximately 3-6 months, but we arerequired to keep it for 8 years. I would like to archive this table (A), butthere are complications.1. the only way to access the data is through the application (they areimages produced by the application-built on Power-Builder)2. there are multiple tables refrencing this table and vise-versa3. we restore the entire db to two other servers for testing and trainingregularly4. there might be more complications that have not been thought ofCurrently, our only plan is to setup a seperate server with a copy of this dbon it and the application. Leave only the tables necessary to access the data,and if this 'archive' works, remove from production the data from the table Aand all references to the table A from rows on the other tables.I mentioned #3 because someone mentioned a third party tool that may be ableto pull the data from the table, archive it elsewhere, and at the same time,place a 'pointer' in the table to the new storage location. The tool theymentioned only works on Oracle and we have not explored beyond that yet.I am ready to explore ideas and suggestions; I am still new to the DBA world,I am out of ideas.Thank you!--Message posted via SQLMonster.comhttp://www.sqlmonster.com/Uwe/Forum...eneral/200607/1
View 1 Replies
View Related
Mar 7, 2008
I'm Working in a Simple picture Gallery On My web site.
When I add my pictures To the table Using Binary Writer and Delete
]
DELETE FROM [Photos]
WHERE [PhotoID] = @PhotoID
It From My Table this Transact Delete the Pictures
but After some work I found That My database File size is increassing day To day I'm very confused
so please tell me where is the problem ?
View 4 Replies
View Related
Oct 18, 2007
Hi,
I am trying to delete a row in excel [Sheet1$], where this data in that row is used in a pivot table in same excel [Sheet2$] which should also get deleted, when i try to delete that row using "delete ... from [Sheet1$] " it is throwing an error message "Deleting data in a linked table is not supported by this ISAM. (Microsoft Office Access Database Engine)"
Can you please guide me in overcoming this error...........
Thanks in advance,
Warm Regards,
gchanduu
View 2 Replies
View Related
Feb 11, 2015
I have a table 300+GB. it holds 10 years of Data. I need to delete 5 years of data and put it to another server so I can have more space.
If I delete 5 years of data, Transaction log gets so huge and size of the database even gets bigger because of the .ldf file which even gets bigger! I think I can shrink the log file and the data file. Is this the best way to do it?
View 8 Replies
View Related
Sep 21, 2015
I have deleted nearly 30 million rows from a table. But however when I used the sp_spaceused command to calculate the data occupied by the table I don't see any difference in the data size of the table. In fact the data has increased to few MBs after the deletion, but not much.
View 8 Replies
View Related
Jun 12, 2015
I have a requirement to delete 1 Million records from a table having 10 Million data and it's being queried on 24/7 basis (don't have a downtime). how can I achieve that?
View 13 Replies
View Related
Jun 9, 2015
I am trying to build various reports that compares data over time. I have one that measures Year Over Year % difference for number of incoming projects. I managed to do that easily by calculating the following
YTDProjects:=if(ISBLANK(SUM('TrendData'[Projects])),blank(),CALCULATE(SUM('TrendData '[Projects]),DATESYTD(CalendarDate[FullDate])))
PYProjects:=if(ISBLANK(SUM('TrendData'[Projects])),blank(),CALCULATE(sum('TrendData '[Projects]),SAMEPERIODLASTYEAR(DATESYTD(CalendarDate[FullDate]))))
YoYDifference:=[YTDProjects]-[PYProjects]
YoYPercProjects:=IF([PYProjects]=0, BLANK(), [YoYDifference]/[PYProjects])
Where Projects is the metric in question, TrendData is the table that contains project data and CalendateDate is the Date Table. But now I am trying to compare the same YTD projects data to number of projects that came in the last 6 months. How do our projects compare to average number of projects that came in last 6 month period.
I tried the the DATEADD function instead but got no luck and data came out wrong!
PrevProjects:=CALCULATE(SUM([Projects]),DATEADD(CalendarDate[FullDate],-1,QUARTER))
For some reason, this also returns blank in my model:
QTDProjects:=TOTALQTD(SUM('TrendData'[Projects]),CalendarDate[FullDate])
View 2 Replies
View Related
Oct 22, 2006
I made ahuge load script in SQL Server 2000 as i load data from manytables(select some of each one collumns) into one single table and iwant to test the loaded data against the selected data to make surethat the loaded data is the same the selected datais there a code or tool to make this test or monitoring ?? pleaseurgent ....
View 2 Replies
View Related
May 3, 2015
I am trying to delete tables from data where the ModifiedDates older than 9 years in AdventureWorks2012 database . I get console notified that foreign keys are dropped but the delete statement is throwing errors. I am sure that somewhere the key constraints are not getting altered, but i'm not able to figure it out as i'm a relative beginner to T-SQL. The error and code:
The DELETE statement conflicted with the REFERENCE constraint "FK_SalesOrderHeaderSalesReason_SalesReason_SalesReasonID". The conflict
occurred in database "AdventureWorks2012", table "Sales.SalesOrderHeader
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SMO") | Out-Null
$option_drop = new-object Microsoft.SqlServer.Management.Smo.ScriptingOptions;
$option_drop.ScriptDrops = $true;
[Code] ....
View 3 Replies
View Related
Sep 10, 2013
I don't know if the question has been nailed down. Aside from deleting tables, can we delete the *content* of data within the tables. It doesn't seem crazy that, if you can pull in data from a feed then you should be able to remove the content out again (without also destroying the user's meta-data work ). Reasons for this include:
- Security (a user may not have rights to see *my* data and should go refresh their own)
- Size (workbook doesn't need to have GB's of irrelevant data saved to disk in a workbook if it was just useful during development phase to a pre-production data feed)
- Bad data (pre-production data feed is not good data)
- User-friendliness (data feed was refreshed 2 years ago and workbook was saved to file server. Users shouldn't be presented with irrelevant data, but should get empty pivot tables until they go do their refresh)
Obviously Excel internally knows how to clear out PowerPivot data, given the prompt shown here: [URL] ....
But how does a user initiate this on their own (corruption aside)?
Previous time this question was asked, without a real resolution: [URL] ....
View 8 Replies
View Related
Apr 10, 2007
Hello,
I am looking for some "best practice" information on how to properly setup a comparison of SQL data -vs- an Excel spreadsheet. I've never performed this task before, and will likely have to do more in the future. How can I define the range of cells to be used from the xls? There are over 1000 rows in the xls, so a Select * from dbo.table where dbo.column = 'x' just isn't practical.
Any information/direction that's out there is most appreciated!
Many thanks
View 1 Replies
View Related
May 1, 2014
I would like to compare some values in two columns which are in the same table. I want to check that there are no differences between the values if the ID is Test1 and Test2
Example table
IDValue1Value 2
TEST1HouseTango
TEST2HouseTango
with test as (
select * from ExampleTable where ID= 'TEST'
),
[Code] ....
View 4 Replies
View Related
Nov 29, 2014
I have two name columns in my table, NAME1 & NAME2 that I want to compare to see if they match. Only problem is that the order of the first, last, middle name can be either same or different between the two fields.
For example
NAME1 = JAY JOHN SMITH
NAME2 = JOHN SMITH JAY or SMITH JOHN JAY
Is there a way to somehow reorder these fields and then compare using SQL?
View 2 Replies
View Related
Mar 18, 2008
Hi guys, i'm sort of stuck.
I have a list of names, all i have to do is check to see if any of them are in a table, if they are they get deleted. The unique field of the table is title and it is what i have. I don't really know how i am meant to do this. I thought of creating a new table, placing my values into it and comparing to the already existing table, but surely their is a simple way?
View 3 Replies
View Related
Oct 18, 2006
Hi all,
Could anyone let me know if there are any Scripts available for comparing the schema differences between two SQL server databases?
Thanks
DBAnalyst
View 2 Replies
View Related
Mar 14, 2008
We are running SQL Server 2005 express on Windows 2003. The database server gets significant amounts of data.
Because of the 4GB data limit we have a daily cron task which goes through and deletes data older then 90 days.
We would like a way to archive this data instead of deleting it. Is there any way to take data and compress it and store it in a different way, so that if needed, customers can query directly out from the compressed data? Cleary querying from compressed would be slower but that is ok.
Any other solutions that would allow us to archive data instead of deleting it? Thanks.
View 10 Replies
View Related
Oct 17, 2001
Hello,
I need to do a query to compare the same field in two different databases. How can I go about doing that? Can you use an if not exists and how does that work?
I also need to compare two numbers in two different databases and then convert that number to a decimal. For example I need to compare 22940 in one column and 22942 in a different column and insert the value of 2.1 in a third column. How can that be done?
Thanks in advance,
Anita
View 2 Replies
View Related
Dec 20, 1999
Hi, I would like to know if it is possible to compare data in two different databases (both SQL7.0),
with same exact schema. If possible, how could we do it?
Thanks
- Sharma
View 1 Replies
View Related
Apr 2, 2003
Hi
Is there a way of comparing the data contained in two separate databases (on the same server)?
I have two databases: DevDB and DB and all I want to verify is that the data in both are *exactly* the same.
Is there a nifty function to do this in SQL Server?
Thanks
Sara
View 8 Replies
View Related
May 6, 2008
Hi
I am relatively new to SQL. Basically i am trying to compare data that doesn't match properly. Firstly one set of data has spaces, secondly the first part of the data is missing.
After researching I am going to remove the spaces with the replace and only query the final 8 number - this would dow hat I want but I cannot get it to work.
Here is my code.
Code:
update aleads as a, leads as l
set a.lid = l.lid
where replace(right(a.htel,8), ' ', '') = replace(right(l.htel,8), ' ', '');
Of course this didn't work but I do not know why - or how to actually achieve this.
View 6 Replies
View Related
Sep 25, 2013
create table #prints(id int IDENTITY(1,1) NOT NULL,
Printermarkersupplyid varchar(36),PrinterID varchar(10),Description varchar(10),SupplyLevel int,ModifiedDate datetime)
insert into #prints(Printermarkersupplyid,PrinterID,Description,SupplyLevel,ModifiedDate)
select newid(),'P1','D1',100,'2013-08-1 03:28:38.203'
union all
[code]....
my requirement is to get the difference between adjacent rows.ie difference between 2nd and 3rd or 6th and 7th but not 6th and 8th.if difference between 2nd and 3rd is less than zero and 3rd modified date > 2nd modified date,then i should get count as 1 against 3rd row.
View 2 Replies
View Related