Deleting Data In A Linked Table Is Not Supported By This ISAM.
Oct 18, 2007
Hi,
I am trying to delete a row in excel [Sheet1$], where this data in that row is used in a pivot table in same excel [Sheet2$] which should also get deleted, when i try to delete that row using "delete ... from [Sheet1$] " it is throwing an error message "Deleting data in a linked table is not supported by this ISAM. (Microsoft Office Access Database Engine)"
Can you please guide me in overcoming this error...........
Thanks in advance,
Warm Regards,
gchanduu
View 2 Replies
ADVERTISEMENT
Jun 7, 2007
Dear Friends,
I am getting error when trying to make excel file as the linked server in my sql server the details are as under:
os: windows xp and also tried on windows server 2003
server: sql server 2005 sp2
excel: office 2003 and also tried with .xls file of office 2007
tried to add the remote as well as file on the same computer as linked server, but error was:
could not find installable ISAM and error no was 7303.
Please help me up.
I got the idea to make it as linked server from microsoft article and followed the neat steps and got the errors.
Thanks,
View 1 Replies
View Related
Mar 9, 2007
I have a table where I want to delete some data from but I get this error.
You might have a record that has a foreign key value related to it, or you might have violated a check constraint.
What to do????
View 1 Replies
View Related
Mar 13, 2014
Is this close to the correct syntax for a stored procedure for deleting all the data from a particular table... or is there a better way?
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE TruncateTmpBank
[Code] ....
View 3 Replies
View Related
Jan 20, 2014
I have to delete a ton of data from a SQL table. I have a unique identifier called the version. I would like to use if not in these versions then delete. I tried to using the statement below, but learned the hard way that it created an error this is the message I got....
Msg 9002, Level 17, State 4, Line 3...
The transaction log for database 'MonthEnds' is full due to 'ACTIVE_TRANSACTION'.
I was reading about truncate, I am not sure how I would do this or how I would setup the statement.
Delete Products
where versions were not in (('48459CED-871F-4971-B888-5083990332BC','D550C8D3-58C7-4C74-841D-1C1675F19AE3','C77C7817-3F04-4145-98D3-37BB1610DB35',
'21FE83FA-476D-4604-80EF-2ED57DEE2C16','F3B50B81-191A-4D71-A406-011127AEFBE1','EFBD48E7-E30F-4047-909E-F14DCAEA4181','BD9CCC41-D696-406B-
'C8BEBFBC-D362-4D0F-A555-B281FC2B3023','EFA64956-C2CF-41FC-8E21-F060597DAFCB','77A8DE56-6F7F-4490-8BED-AA6809B947EF','0F4C1E5F-B689-4DCB-
[code]....
View 2 Replies
View Related
Feb 13, 2008
Hi gurus,
The data is automaticaly deleting from one perticular table at every night from last week onwords. I have created a delete trigger to find it out. But Nothing was recorded. There is no jobs except maintainance plans. Nothing in event viewer too. The database recovery model is simple. How can i solve this problem
Please advise me to solve this problem
Thanks
Krishna.
View 11 Replies
View Related
Jul 20, 2005
I have an entry form allowing customers to enter up to 15 skus (productid) at a time, so they can make a multiple order, instead of enteringone sku, then submitting it, then returing to the form to submit thesecond one, and so forth.From time to time, the sku they enter will be wrong, or discontiued, soit will not submit an order.Therefore, when they are done submitting their 15 skus through the orderform, I want a list showing them all of those skus that came back blank,or were not found in the database.I'm doing this by creating two tables. A shopping cart, which holds allthe skus that were returned, and a holding table, that holds all theskus that were submitted. I want to then delete all the skus in theholding page that match the skus in teh cart (because they are goodskus) which will then leave the unmatched skus in the holding table.I'll then scroll out the contents of the holding table, to show them theskus that were not found in the database.(confused yet?)So what I want to do is have some sql that will delete from the holdingtable where the sku = the sku in the cart. I've tried writing this, butit dosn't work.I tiried this delete from holding_table where sku = cart.skuI was hoping this would work, but it dosn't. Is there a way for me to dothis?Thanks!Bill*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 2 Replies
View Related
Mar 20, 2008
Hi Everybody,
Kindly let me know if there is a way of deleting data from primary table without deleting data from its corresponding foreign key table.
Thanks & Regards
View 2 Replies
View Related
May 30, 2006
I can run a select to retrieve data using a prefix 'a' for the specific table involved. However when I try to run a delete using the same criteria it fails telling me
Msg 102, Level 15, State 1,.......Line 1
Incorrect syntax near 'a'
The Select statement looks like:
select count(*) from schema.table a where a.customer_id=1234
The Delete looks like:
delete from schema.table a where a.customer_id=1234
What am I doing wrong here? and how can I prefix the table, because the command I want to run is much more complicated than the example above and it needs the prefix
View 3 Replies
View Related
Aug 9, 2007
Hi
i have to delete the master table data without deleting the child table records,is there any solution for this, parent table has relation with the child table.
regards
vinod.t.v
View 9 Replies
View Related
May 18, 2001
I need to delete data from a particular table which has more than half a million records. The data needs to be deleted is more than 200,000 records from the table. What is the best way to delete the data from the table other than importing into a temporary table and performing the same operation?
Let me know if the strategy to be followed is okay.
1. Drop all the triggers
2. Drop all the indexes
3. Write a procedure with a loop setting ROWCOUNT to 1000 and delete the records. ( since if I try to delete all the rows it will give timeout error )
The above procedure will delete 1000 records for each batch inside the loop till it wipes out all the data for the specified condition.
4. Recreate Indexes and Triggers.
Please let me know if there are any other optimal solution.
Thanx,
Zombie
View 2 Replies
View Related
Mar 16, 2004
I have a huge table with 4 primary keys on it. I need to delete the data from this table ( approx. 5.6 millions records to be deleted). It takes a hell lot of time to delete it by normal query.
Can someone please suggest me a better way?
Any help will be appreciated.
View 14 Replies
View Related
Jul 20, 2006
We are using SQL Server 2000 Standard ed, sp4 on Server 2000 Advanced.We have one table that is three times as large as the rest of the database.Most of the data is static after approximately 3-6 months, but we arerequired to keep it for 8 years. I would like to archive this table (A), butthere are complications.1. the only way to access the data is through the application (they areimages produced by the application-built on Power-Builder)2. there are multiple tables refrencing this table and vise-versa3. we restore the entire db to two other servers for testing and trainingregularly4. there might be more complications that have not been thought ofCurrently, our only plan is to setup a seperate server with a copy of this dbon it and the application. Leave only the tables necessary to access the data,and if this 'archive' works, remove from production the data from the table Aand all references to the table A from rows on the other tables.I mentioned #3 because someone mentioned a third party tool that may be ableto pull the data from the table, archive it elsewhere, and at the same time,place a 'pointer' in the table to the new storage location. The tool theymentioned only works on Oracle and we have not explored beyond that yet.I am ready to explore ideas and suggestions; I am still new to the DBA world,I am out of ideas.Thank you!--Message posted via SQLMonster.comhttp://www.sqlmonster.com/Uwe/Forum...eneral/200607/1
View 1 Replies
View Related
Mar 7, 2008
I'm Working in a Simple picture Gallery On My web site.
When I add my pictures To the table Using Binary Writer and Delete
]
DELETE FROM [Photos]
WHERE [PhotoID] = @PhotoID
It From My Table this Transact Delete the Pictures
but After some work I found That My database File size is increassing day To day I'm very confused
so please tell me where is the problem ?
View 4 Replies
View Related
Feb 11, 2015
I have a table 300+GB. it holds 10 years of Data. I need to delete 5 years of data and put it to another server so I can have more space.
If I delete 5 years of data, Transaction log gets so huge and size of the database even gets bigger because of the .ldf file which even gets bigger! I think I can shrink the log file and the data file. Is this the best way to do it?
View 8 Replies
View Related
Sep 21, 2015
I have deleted nearly 30 million rows from a table. But however when I used the sp_spaceused command to calculate the data occupied by the table I don't see any difference in the data size of the table. In fact the data has increased to few MBs after the deletion, but not much.
View 8 Replies
View Related
Feb 13, 2008
I have two tables that share a common identity row. I need to build a query where data that exists in one table does not contain data in the other table. For example, table 1 has columns of Owner_ID, LastName, FirstName and table 2 has columns Auto_ID, Owner_ID, AutoMake. Both tables are joined by the Owner_ID column. I need a query that provides all owners from table 1 who do not have an entry in table 2.
Thanks in advance,
Mark
View 5 Replies
View Related
Jan 24, 2008
Hey there! I've take a look around the forum and didn't find anything about my problem. The SelectCommand of my SqlDataSource get data from 3 tables. SqlDataSource.SelectCommand = "SELECT [sa_Profil].[ID], [Nom], [Prenom], [Telephone], [ID_Reference], [ID_Appel], [Nom_Reference], [Type_Appel] FROM [sa_Profil], [sa_Suivi], [sa_Reference], [sa_Appel] WHERE [sa_Profil].[ID] = [ID_Profil] AND [ID_Reference] = [sa_Reference].[ID] AND [ID_Appel] = [sa_Appel].[ID]" How can I wrote my InsertCommand & UpdateCommand ? I mean, INSERT INTO Table1 Table2 ... doesn't exist ... Thanks for your help!
View 2 Replies
View Related
Aug 27, 2007
I receive the following error message when I run a distributed query against a loopback linked server in SQL Server 2005:
The Microsoft Distributed Transaction Coordinator (MS DTC) has cancelled the distributed transaction.
To resolve this problem, I was told that running a distributed query against a loopback linked server is not supported in SQL Server 2005. And I am suggested to use a remote server definition (sp_addserver) instead of a linked server definition to resolve this problem. (Although this is only a temporary resolution, which will deprecate in Katmai)
However, I run into another problem when I use the remote server definition. I receive the following error message:
Msg 18483, Level 14, State 1, Line 1
Could not connect to server 'ServerNameSQL2005' because '' is not defined as a remote login at the server. Verify that you have specified the correct login name.
Could anyone please help me out?
(I include the reproduce steps for the first error message, followed by my resolution that generates the second error message)
======
Reproduce steps for the first error message
======
On the ComputerAInstanceA instance, run the following statement to create a database and a table:
CREATE DATABASE DatabaseA
GO
USE DatabaseA
GO
CREATE TABLE TestTable(Col1 int, Col2 varchar(50))
GO
INSERT INTO TestTable VALUES (1, 'Hello World')
GO
On the ComputerBInstanceB instance, run the following statement to create a database and a table:
CREATE DATABASE DatabaseB
GO
USE DatabaseB
GO
CREATE TABLE TestTable (Col1 int, Col2 varchar(50))
GO
On the ComputerAInstanceA instance, create a linked server that links to the ComputerBInstanceB instance. Assume the name of the linked server is LNK_ServerB.
On the ComputerBInstanceB instance, create a linked server that links to the ComputerAInstanceA instance. Assume the name of the linked server is LNK_ServerA.
On the ComputerBInstanceB instance, run the following statement:
USE DatabaseB
GO
CREATE PROCEDURE InsertA AS
BEGIN
SELECT * from LNK_ServerA.DatabaseA.dbo.TestTable
END
GO
On the ComputerAInstanceA instance, run the following statement:
USE DatabaseA
GO
INSERT INTO TestTable
EXEC LNK_ServerB.DatabaseB.dbo.InsertA
GO
Then I receive the first error message.
=======
My resolution that generates the second error message
=======
On the ComputerBInstanceB instance, run the following statement:
sp_addserver 'ComputerAInstanceA'
GO
sp_serveroption 'ComputerAInstanceA', 'Data Access', 'TRUE'
GO
USE DatabaseB
GO
CREATE PROCEDURE InsertA AS
BEGIN
SELECT * FROM [ComputerAInstanceA].DatabaseA.dbo.TestTable
END
GO
On the ComputerAInstanceA instance, run the following statement:
USE DatabaseA
GO
INSERT INTO TestTable
EXECUTE [ComputerBInstanceB].[DatabaseB].[dbo].[InsertA]
GO
Then I receive the second error message.
View 1 Replies
View Related
Jun 12, 2015
I have a requirement to delete 1 Million records from a table having 10 Million data and it's being queried on 24/7 basis (don't have a downtime). how can I achieve that?
View 13 Replies
View Related
Sep 18, 2006
hi Experts,
I have a Issue table which stores the below data for many issue. some issue are duplicate to other and they are stored in a field Duplicate_of
ID
Duplicate_of
State
77637
65702
Duplicate
65702
42217
Duplicate
42217
-
Verified
i wanted to write a query or some stored procedure when passed 77637 should help me get 42217.
Hint : 77637 when passed has field Duplicate_of which point to 65702 and his state will be Duplicate, 65702 will be duplicate to 42217 and state will be duplicate and 44217 is not duplicate to anything and state will be other then Duplicate
i appreciate if somebody can help me think in some line to give me some idea.
/soni
View 1 Replies
View Related
Sep 18, 2006
hi Experts,
I have a Issue table which stores the below data for many issue. some issue are duplicate to other and they are stored in a field Duplicate_of
ID
Duplicate_of
State
77637
65702
Duplicate
65702
42217
Duplicate
42217
-
Verified
i wanted to write a query or some stored procedure when passed 77637 should help me get 42217.
Hint : 77637 when passed has field Duplicate_of which point to 65702 and his state will be Duplicate, 65702 will be duplicate to 42217 and state will be duplicate and 44217 is not duplicate to anything and state will be other then Duplicate
i appreciate if somebody can help me think in some line to give me some idea.
/soni
View 5 Replies
View Related
Oct 25, 2013
I linked an SQL server table into Access, but when I open the table in Access, no data shows. Do I need to set some permissions on the sql table?
View 1 Replies
View Related
Sep 4, 2001
The error in the subject line "The property 'Use Encryption for Data' is not supported" is encountered when running a DTS package via a job step in SQL Server 7.0. The problem is not encountered when executing the DTS package interactively via Enterprise Manager from my PC. When I view the Advanced Properties of the OLE DB driver from Enterprise Manager on my PC, I notice a Use Encryption for Data Property. When I view the Advanced Properties of the OLE DB driver from Enterprise Manager on the Server, the Use Encryption for Data Property does not appear. Service Pack 3 for SQL 7.0 is installed on both my PC and on the SQL Server. I suspect this Property difference for OLE DB could be related to the fact that I installed Enterprise Manager for SQL 2000 on my PC at one time and then uninstalled. Any ideas how to correct this situation?
View 1 Replies
View Related
Aug 30, 2006
Is anyone know about waht type of table or database name
that not supported or will have error during execution of SQL statement
in SQL or MS Access database. For my, I know only two ,
i.) cannot put table name that same as the the database name
ii.) cannot put database name like "RETURN", "POSITION",etc.
Is there any reference site that show out a list of table about the
table or database name ??? Thank You ... :)
View 5 Replies
View Related
Dec 4, 2006
EXEC master.dbo.sp_addlinkedserver @server = N'DM', @srvproduct=N'DM Association', @provider=N'MSDMine', @datasrc=N'ray620', @catalog=N'DM Association'
select * from openquery (DM,'SELECT * FROM [Model Association TB].Content where NODE_TYPE = 8;')
Msg 7354, Level 16, State 1, Line 2
The OLE DB provider "MSDMine" for linked server "DM" supplied invalid metadata for column "NODE_DISTRIBUTION". The data type is not supported.I'm getting an error with the metadata. Appreciate any assistance. Thank you in advance.
View 1 Replies
View Related
Dec 12, 2007
Pls Can someone tell me why this code is giving me "Could not find installable ISAM"
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.LoadDim strConn As New OleDbConnection("Provider=Microsoft.JET.OLEDB.4.0;Data Source=" & Server.MapPath("~/App_Data/WK 48-2007.xls") & ";" & "Extended Properties=""EXEL 8.0;HDR=YES""")strConn.Open()Dim StrSelect As String = "SELECT * FROM [Sheet1$]"Dim Comm As New OleDbCommand(StrSelect, strConn)Dim reader As IDataReader = Comm.ExecuteReaderGRD.DataSource = readerGRD.DataBind()reader.Close()strConn.Close()End Sub
View 4 Replies
View Related
Feb 24, 2008
Hello, can u plz tell me why this error come and what is the solution of this error.... i m trying to impot data from excel sheet into SQl Server database.protected void Button1_Click(object sender, EventArgs e) { try { string excelConnectionString = @"Provider = Microsoft.Jet.OLEDB.4.0;DataSource=C:Documents and SettingsBonerich44Desktopusername.xls;Extended Properties=8.0"; //create connection to the excel workbook using (OleDbConnection connection = new OleDbConnection(excelConnectionString)) { OleDbCommand cmd = new OleDbCommand("Select * from [Sheet1$]", connection); connection.Open(); //create DBreader to DataWorksheet using (OleDbDataReader dr = cmd.ExecuteReader()) { //SqlServer connection string SqlConnection myconnection = new SqlConnection(); myconnection.ConnectionString = "server=SYS20;database=Instantmessenger;userid=sa"; myconnection.Open(); //bulkcopy to SqlServer using (SqlBulkCopy bulkcopy = new SqlBulkCopy(myconnection)) { bulkcopy.DestinationTableName = "username"; bulkcopy.WriteToServer(dr); } myconnection.Close(); } } } catch (Exception ex) { Response.Write(ex.Message); } finally { }
View 2 Replies
View Related
May 11, 2001
Hi All,
I am trying to create a DTS package through EM Wizard. It is trying to get data from a table into an Excel. While doing so , it gives an error Error Source : Microsoft Jet Database Engine
Error : Could Not Find Installable ISAM
Can some one please help !!
Thanking you in advance.
Regards
Nat
View 2 Replies
View Related
Oct 23, 2007
I'm new here and this is my first post. I am not sure if this is the right place for me to post this problem but I really need your help guys. I've been looking for a solution of this problem for almost a week now. I'd googled a lot but of no result.
What I want to do is to import records from access 2000 database to SQL 2005 Express. I use the following statement to import records:
SELECT * FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0', 'Data Source="D:SamplesMydatabase.mdb";User ID=Admin;JET OLEDB:Database Password=mypass', 'tblTab1')
The following error shows:
Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)".
I dont know if the statement is correct or I am missing something. I had reinstalled my MS Access but this does not help either. By the way I'm using Access 2003 and my database is 2000 access version.
Hope somebody can help me get out of this.
thanks,
bodjo
View 15 Replies
View Related
Jun 11, 2007
Installed Office 2007 and I am trying to develop an import by developing a Integration Project. If I use SQL2005 to import the data to create the table or I try to develop the Integration Project I keep getting a Can not find installable ISAM. I have tried to update the MDAC but either the SP is not supported in XP SP2 or it would do anything since there is a later version already installed. This is the same when I try and install / update the Jet database engine.(4.0). Does anyone have a clue, the only thing I can find info on is Access and other db's. This appears to be a product issue but which one I don't know.
View 4 Replies
View Related
Jun 15, 2006
Hi, when l use the ADO.NET with the following query, SELECT * INTO XLImport5 FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0',
'Excel 8.0;Database=C: estxltest.xls', 'SELECT * FROM [Customers$]')i get the following error, i.e.Error: 0xC002F210 at Execute SQL Task, Execute SQL Task: Executing the query "SELECT * INTO XLImport5 FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0','Excel 8.0;Database=C: estxltest.xls', 'SELECT * FROM [Customers$]')" failed with the following error: "Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)".OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)" returned message "Could not find installable ISAM.".". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Execute SQL TaskAny idea, what's wrong?Regards,YB Lim
View 7 Replies
View Related
Jun 18, 2007
I created an Integration Services Package that runs fine from my local computer using BIDS. However when I imported into our SQL Server and try to run it from there I get the following error:
DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "Data Conversion"
We are running SQL Server 2005 Standard Edition 64-bit.
We have integration services installed on the server. Is data conversion something that is not supported on Standard Edition?
Also have a similar message for "Send Mail Task."
Is there anywhere that outlines what features are supported on each version?
View 15 Replies
View Related