I have three columns (CWOC, C, and PWC). both CWOC and PWC are dependent on the value in C, yet C is dependent on the value in PWC.
Basically:
C = PWC * BR
PWC = MR - CWOC
CWOC = MC - C
In setting up these columns in the database how do I set up columns like these that are so dependent on each other?
This was set up previously in Excel using iteration, but now I'm recreating the application in VB.net and SQL Server.
Thanks for your suggestions.
I have a ABC service on a server1 that is dependent on MSSQLSERVER service running on server2. Does anyone know how to setup the service ABC on server1 to have a dependancy on MSSQLSERVER running on server2?
Thanks,
jgs
I am trying to query only the Max date dependant on quantity
Create Table dbo.TestParts
(Part char(30), Desc1 char(50), Desc2 char(50));
Create Table dbo.TestStructure
(Model char(30), Part char(30), EDATE smalldatetime, QtyPer float);
GO
Insert INTO dbo.TestParts Values('101111','Widget A', 'Batteries Not Included'),
[Code] ....
Looking for a return of:
PART Description EDATE QtyPer
101112 Widget B ..... 2012-12-03 3
101113 Widget C ..... 2012-12-03 5
101114 Widget D ..... 2012-12-01 1
Widget A should not show because the last date the qty was changed to Zero
Closest that I have come..........(which is pulling the part 101111 which should be incorrect)
Select ts.Part, RTRIM(tp.Desc1) + ' ' + RTRIM(tp.Desc2) as Description,
ts.EDATE, ts.QtyPer
FROM testing.dbo.TestStructure ts
Inner Join (Select Part,MAX(EDATE) as Date
FROM testing.dbo.TestStructure
WHERE QTYPER <> '0'
[Code] .....
I am trying to do a select query like below...
SELECT INVENTORY_ITEM_TAB.ITEM_NO, INVENTORY_ITEM_TAB.DESCR, INVENTORY_ITEM_TAB.STATUS_FLG, INVENTORY_ITEM_TAB.PRICINGUOM,
INVENTORY_ITEM_TAB.PURCHUOM, INVENTORY_ITEM_TAB.ITEM_CATEGORY, INVENTORY_ITEM_TAB.ICINTERNALNOTES, INVENTORY_WHS.QTY_ON_HAND,
INVENTORY_WHS.QTY_ON_ORDER, INVENTORY_WHS.QTY_ALLOCATED
FROM INVENTORY_ITEM_TAB INNER JOIN
INVENTORY_WHS ON INVENTORY_ITEM_TAB.ITEM_NO = INVENTORY_WHS.ICWHSPCODE
WHERE (INVENTORY_ITEM_TAB.ITEM_CATEGORY = 'SS') AND QTY_ALLOCATED, QTY_ON_HAND, Qty_On_ORDER <> 0
ORDER BY INVENTORY_ITEM_TAB.DESCR
But I don't want to select records if all of these fields have a 0 in them - QTY_ALLOCATED and QTY_ON_HAND and QTY_ON_ORDER.
how to do this type of query. If any of those fields doesn't have a 0 then I would want to return it. I just don't want them if all three of those fields have 0.
Suppose I have the following table:col1 col2hammet jonesjlo afflectafflect armandwills snoptarmand hammetjones smithIf someone choses armand, then I'd like to returnamand hammet jones smithThe first selection goes over to the second column, gets that valueand locates it back in column one and returns column 2 and so on.One way of doing it is to set up a separate query for each one andthen construct a new query to get them all.I'm thinking there's a more elegant way to do this. Any suggestionswould be appreciated.-David
View 2 Replies View Related
Hi,
I have a problem with a report.
in this report 1 use 2 combo boxes. The first with my organisation on different levels.
And in the second a value for every level and all.
Now i want to filter the organisation box with the second combo box.
For the first time it works but if i change after that the box it doesn't work.
I use SQL Reporting Services 2005
I was just analysing the security which can be given to different users to access respective databases. So i tried, on my local server, to deny permission to myself to access Model database. After this i am not able to connect to my local server at all. Error: Permission denied. I am using windows authentication mode.
I have also deleted the local server registration, and re-registered it, but still the condition is same. Do i need to uninstall SQL Server completly to get rid of this prob.? I also registered a new data server, and there every thing is going fine. So now what do i do to get connected to my local server.
Hi,
I have a report which uses a parameter called "Interval" with possible string values of "Daily", "Weekly", and "Monthly" and I want these values to set the default values for my StartDate and EndDate parameters. However, the default value remains static. And I have tried all of the solutions found in this forum. Any suggestions?
I am using SSRS 2005. And I have tried using an iif statement for StartDate, also tried Property->Custom Code, and also tried using stored procedure to populate Start and End Dates, but none of these provide dynamic parameter setting like I was hoping for.
And I think this should work because I know that if it is not a date that it works correctly. For example if I have one parameter called country and a subsequent one named state, every time I change the country it will let me re-pick the state. But this is not working correctly here.
Any ideas on what I am doing wrong or how to fix this?
I am not able to delete a row due to the presence of its parent table. There is no circular relationship and the child has no dependencies when I verify the Delete trigger. Any advice? See error msg below:
Msg 30010, Level 16, State 1, Procedure tD_My_child_table_name, Line 43
Cannot DELETE last My_child_table_name CI because My_parent_table_name exists.
Msg 3609, Level 16, State 1, Line 1
The transaction ended in the trigger. The batch has been aborted.
Hi there,
I'd need to generate multiple recordsets within a MS SQL stored procedure. The thing is these recordsets depend on each previous one (the first one obviously has parameters). How can I make this work? I can't create views with SPs. Thank you very, very much.
Martin
I want to execute multiple SQL Server scheduled jobs using OSQL, but I only want to execute a job if the previous job completed. Is this possible? So far I am unable to prevent all jobs from starting before any have completed.
OSQL -Sservername -E -b -Q"usp_start_job 'JobNumber1'" -o usp_start_job.out
IF ERRORLEVEL 1 GOTO ERROR
OSQL -Sservername -E -b -Q"usp_start_job 'JobNumber2'" -o usp_start_job.out
IF ERRORLEVEL 1 GOTO ERROR
OSQL -Sservername -E -b -Q"usp_start_job 'JobNumber3'" -o usp_start_job.out
IF ERRORLEVEL 1 GOTO ERROR
GOTO EXIT
:ERROR
ECHO *** ERROR *** Check Log File
:EXIT
*** JOB COMPLETED ***
Dave
We have an interesting performance issue with a distributed query. When run by a system-administrator account, the remote computer returns the requested row set. It does the same thing for small row counts (<=7) for user accounts. On larger row counts, however, the user account returns the ENTIRE rowset from the remote table, and performs the restrict operation locally. Performance-wise, this results in a difference between 11 seconds and 12 MINUTES. I'm assuming it's some sort of security issue in DTC, but the remote server is on Windows Server 2000, and there's no security button for DTC under Component Services.
Suggestions?
The query in question is:
EXEC ("INSERT INTO #XML (vin, ws_xml, lang_id)
SELECT slo.vin,
br.xml,
br.lang_id
FROM #SALE_LINEUP_ORDER slo
INNER JOIN RemoteServer.mydatabase.dbo.build_record br ON slo.vin = br.vin
INNER JOIN #LANGUAGE_IDS li ON br.lang_id = li.lang_id")
Excuse my illiteracy in this subject, I just learned about this yesterday, I managed to create a report by using business intelligence report wizard, and when I preview it seems that I can view the fields that I wanted to view.
But in addition to that I also want to add hyperlinks to some of the fields, because I am planning to embed the whole report in a web page. For example if I go on the field that I want to add hyperlink and right click->properties->navigation tab->Jump to url, I thought that I can handle it. Actuall it works fine if I link it to http://www.microsoft.com but let's assum e the name of the field is ID, and you want to link to http://somewebsite/somepage.aspx?id= (id in that cell), how can I achieve this parametric behavior, actually I tried right click cell->properties->navigation tab->Jump to url, and filled url text box http://somewebsite/somepage.aspx?id=&(concatenation operator)=Fields!ID.Value but what happens is instead of evaluating the value of ID field, it takes expression as text as text and that's why it links to totally wrong url. Is there a way to get around this problem.
And can somebody suggest me a detailed tutorial on programmatically using reports in .net web applications using c#.
If somebody can help me I'd be really glad.
Erinc
Hello
I have following data and environement is SQL Server 2000.
Hello
I have following data and environement is SQL Server 2000.
MemberID
Dependent_Empid
DependentName
Benefit
1
100
Kalim
100
2
100
Brian
100
3
100
Swadia
200
4
101
Allan
200
5
101
Cynthia
200
6
103
Noreen
200
7
103
Larry
300
8
103
Mike
300
and I am desired for the following output but I dont want to use function. Can anybody help me for script for the desired output. I will be much thankful.
Dependent_Empid
Members
100
Kalim 100, Brian 100, Swadia 200
101
Allan 200, Cynthia 200
103
Noreen 200, Larry 300, Mike 300
Greetings all:
I am looking for a way to get detailed information about each created table (regardless of permanancy) in a stored procedure, similar to the information one received from using sp_help on an individual table.
Does anyone know of such an animal?
Thank you, and Happiest of New Years,
Jack Cole
Magellan Healthcare, Inc.
I have a table with one row for each test a user has taken, with columns for userid, score, and test date. I have a query that gets the highest score and the date of the latest test for each user. Easy. But how can I also get the score achieved on the latest test for each agent?
Thanks,
John
(By the way, I've been looking for a good SQL mailing list to ask this question and have been unsuccessful. If there's a better forum than this for this type of question, please let me know).
I wonder if anyone can help me -
I am trying to write a little application which recompiles any views dependent on a given view.
I have a script which will identify any views containing a given text string, but I now need a way to force SQL Server to refresh its cache info (or recompile) the views.
I have to admit that I am unclear on exactly how the caching works; i have tried using sp_recompile, but this does not seem to do the job.
Does anyone have any ideas?
Hi,DDL:-- create table #task (taskID int identity(1,1) primary key, taskNamevarchar(25) unique, taskCompleteDate dateTime, taskComplete bitdefault(0));/*Business Rules:a) if taskCompleteDate is NULL (like default) then, taskComplete maynot be set to 1 (attempt to update it to 1 would fail);b) else automatically set taskComplete = 1*/I was thinking using CHECK constraint (mutual constraint if possible),along the following line:CHECK (if taskCompleteDate is null set taskComplete=0 else settaskComplete=1)Hmm, your thought?Thanks.
View 5 Replies View RelatedHi all,
I have a data mining model that has a binary dependent variable (let's say 'Yes' and 'No'). I noticed that the model is very sensitive to the distribution of the binary dependent variable. I could not come up with an explaination. I know the model is not over/under fits and multicollinearity is not an issue. And I have enough data size to train the model.
I would expect some sensitivity but not to this extend:
Yes % in training data
Yes % in the prediction results
with DT
with LR
with NN
30.0%
6.0%
11.0%
14.0%
35.0%
12.0%
15.0%
24.0%
37.5%
20.0%
23.0%
27.0%
40.0%
28.0%
33.0%
36.0%
50.0%
43.0%
52.0%
61.0%
DT - Decision Trees
LR - Logistic Regression
NN - Neural Networks
And to make things more interesting, although the precision (% of correct 'Yes's ), true positive ratio and false positive ratio is changing; the overall accuracy (and therefore the score in the mining accuracy chart) remains almost same.
If anyone has an idea it would be highly appreciated.
Thanks in advance, Afsin
Hi There,
Here I have small problem with default and rule.
After create rule or default then we will bind that to any table.
I bounded that rule to some of tables.If i want see the list of objects dependent on this rule or default
how to see.I know sp_depends stored procedure will show the all dependent
objetcs but i could not get through that.I found in help it says sp_depends works
for all objects in the database like table,view and so on.But default and rule also
objects i could not get it.Please let me know on this if you can give this answer as early as possible.
I am very thanks to you.Please don't specify SQL-DMO Listboundedcolumns function.....
Thanks
Ramki
I have two procedures Sp1 and Sp2. The Sp1 is calling from Sp2. If there come new parameters or removed from the first procedure Sp1 then it will effect the Sp2 and its execution will break if required changes not done. So I want that when any changes making in SP1 then i need alert about the Sp2 changes.
View 3 Replies View RelatedHi Frens,
Could anybody tell me how can I find all the database objects that are used in /referenced by/called by/dependent on a given stored procedure? In other words, I am looking for something like a stored procedure or a function that takes as input the name of a stored procedure and outputs all the names of the tables, functions, procedures, cursors and etc. database objects that are used in that procedure. Could you please give me suggestions or possible answers for this?
Thanks a lot for your time.
Regards,
-Ram.
Hi i am trying to get the following result:
CALCULATE THE CURRENT NUMBER OF SHARES on base of number of shares bought and number of shares sold
so the logic is
int total
if transactiontype is "buy", total = total + amount bought
if transactiontype is sell, total = total-amount sold
plus must be grouped by share
base data are stored in 1 table as
share name transaction type share amount
tesco buy 200
tesco sell 50
sounds rather easy does it not?
well sql syntax must be very foreign to me as i do not manage it
I tried a few options:
1 to write a database function as above and then call it from sproc
but i need to use group by share name or id so it calculates for each share and it will not let me to use function in select with group by
2 i tried to use if within sproc but i get complain incorrect syntax (I use MSDE database accessed via Visual) - I think it suppose to be possible but it throws me out with the most simple if or = is there some special syntax?
3 I created 2 views: 1 view: all sold shares, 2nd view: all bought shares and their bought/sold quantities
as in
select share name, sum(sharequantity)
where transaction = sell
from table
group by share name
and the same for purchases
then I did union of these 2 views with boughtquantity - soldquantity what worked but it only showed me shares which were sold, if share was never sold it was not shown I guess due to union
so I am still stuck!
I am attempting to use a CLR Function to perform an update operation, since a SQL UDF will not allow this within the function. For the POC, I hard-coded the db connection string and setup the assembly to use EXTERNAL_ACCESS. This worked fine and the update operation was running properly via the CLR Function. However, I now want to make the code run in the current db context without plugging in a connection string. So, I've applied "context connection=true" instead of the explicit db string. When I do this, I am receiving the following error:
A .NET Framework error occurred during execution of user defined routine or aggregate
'MyTestCLRUDF':
System.Data.SqlClient.SqlException: Invalid use of side-effecting or time-dependent operator in 'UPDATE' within a function.
System.Data.SqlClient.SqlException:
etc.
I don't understand why simply swapping the connection string would cause this issue. I assume this is somehow related to permissions, and I am missing something. I've tried using each of the three permission levels (external, safe, and unsafe), and no luck.
Any help is appreciated! Here's the code:
public static bool MyTestCLRUDF(Guid myID)
{
string connectionString = "context connection=true";
using (SqlConnection connection = new SqlConnection(connectionString))
{
SqlCommand command = new SqlCommand("MySprocName", connection);
command.CommandType = CommandType.StoredProcedure;
SqlParameter parameter = new SqlParameter("@ID", myID);
command.Parameters.Add(parameter);
connection.Open();
command.ExecuteNonQuery();
connection.Close();
}
return true;
}
I am trying to move data from 8 different tables that are dependent on each other through foreign key relationship.
Basically they have millions of rows in each table and they have data for the past 5 years. I want to move data for the past 120 days and move it to 8 new tables in the same database. So I created the new tables along with their relationships. Now I need to move in the order (parent table first).
The child table has 50million rows data to move
The intermediate tables have 10 mil 10mil 10mil and 40 mil 50mil and 20 mil rows to move
The parent table has 10 mil rows to move
if I choose to move this data through an SSIS package what is the best way? Or is there a better way to move this data faster?
I will be doing this move only once. After that I have maintenance purge jobs that will cleanup data on a daily basis.
Hi all, mister
I want create a function but I get this error: Error Invalid use of side-effecting or time-dependent operator in 'EXECUTE STRING' within a function
I think in a function, cannot use temp tables, or calling exec or store procedures.
Which is the best solution for my issue ? develop store procedure ??
thanks.
CREATE FUNCTION fnObtenerTablaMaestra ()
RETURNS @T Table ( Descripcion VARCHAR(20) NOT NULL, CIF VARCHAR(8) NULL )
AS
BEGIN
DECLARE @cmd nvarchar(max)
DECLARE @sql nvarchar(max)
DECLARE @nexoUNION NVARCHAR(max)
DECLARE @params nvarchar(max)
DECLARE @NombreTabla VARCHAR(MAX)
DECLARE @Descripcion VARCHAR(MAX)
DECLARE @CIF VARCHAR(MAX)
-- Cannot access temporary tables from within a function.
-- IF EXISTS (SELECT TABLE_NAME FROM tempdb.INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME LIKE '#tmpTable%')
-- DROP TABLE #tmpTable
-- CREATE TABLE #tmpTable ( Descripcion VARCHAR(20) NOT NULL, CIF VARCHAR(8) NULL )
SET @nexoUNION = NULL
DECLARE c1 CURSOR for
SELECT [CD_NOMBRE_TABLA], [DS_CAMPO_DESCRIPCION], [DS_CAMPO_CIF] FROM [TABLA_MAESTRA]
OPEN c1
FETCH c1 INTO @NombreTabla, @Descripcion, @CIF
--FETCH NEXT FROM c1 INTO @NombreTabla, @Descripcion, @CIF
WHILE @@FETCH_STATUS >= 0
--WHILE @@FETCH_STATUS = 0
BEGIN
SELECT @sql =
'INSERT INTO #tmpTable
N'''+ @NombreTabla + '''
N'''+ @Descripcion + '''
N'''+ @CIF + ''''
SELECT @sql =
'SELECT ' + @Descripcion + ', '+ @CIF + ' FROM ' + @NombreTabla
IF @nexoUNION IS NULL
BEGIN
SET @nexoUNION = 'UNION'
END
ELSE
SET @sql = @nexoUNION + ' ' + @sql
-- EXECUTE (@sql)
--Exec(@sql)
FETCH c1 INTO @NombreTabla, @Descripcion, @CIF
--FETCH NEXT FROM c1 INTO @NombreTabla, @Descripcion, @CIF
END
CLOSE c1
DEALLOCATE c1
--SET @sql = 'SELECT Descripcion, CIF FROM #tmpTable'
-- Error Invalid use of side-effecting or time-dependent operator in 'EXECUTE STRING' within a function
EXECUTE(@sql)
RETURN
END
GO
Hello:
I am running into an issue with RS2k PDF export.
Case: Exporting Report to PDF/Printing/TIFF
Report: Contains 1 table with 19 Columns. 1 column is static, the other 18 are visible at the users descretion. Report when printed/exported to pdf spans 2 pages naturally, 16 on the first page, 3 on the second, and the column widths have been adjusted to provide a perfect page span .
User A elects to hide two of the columns, and show the rest. The report complies and the viewable version is perfect, the excel export is perfect.. the PDF export on the first page causes every fith column, starting with the last column that was hidden to be expanded to take up additional width. On the spanned page, it renders the first column on that page correctly, then there is a white space gap equal to the width of the hidden columns and then the rest of the cells show with the last column expanded to take up the same width that the original 2 columns were going to take up, plus its width.
We have tried several different settings to see if it helps this issue or makes it worse. So far cangrow/canshrink/keep together have made no impact. It is not possible to increase the page size due to limited page size selection availablility for the client. There are far too many combinations of what the user can elect to show or hide to put together different tables to show and hide on the same report to remove this effect.
Any help or suggestion on this issue would be appreciated
I have a business need to create a report by query data from a MS SQL 2008 database and display the result to the users on a web page. The report initially has 6 columns of data and 2 out of 6 have JSON data so the users request to have those 2 JSON columns parse into 15 additional columns (first JSON column has 8 key/value pairs and the second JSON column has 7 key/value pairs). Here what I have done so far:
I found a table value function (fnSplitJson2) from this link [URL]. Using this function I can parse a column of JSON data into a table. So when I use the function above against the first column (with JSON data) in my query (with CROSS APPLY) I got the right data back the but I got 8 additional rows of each of the row in my table. The reason for this side effect is because the function returned a table of 8 row (8 key/value pairs) for each json string data that it parsed.
1. First question: How do I modify my current query (see below) so that for each row in my table i got back one row with 19 columns.
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*
FROM PRODUCT A
CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B
If updated my query (see below) and call the function twice within the CROSS APPLY clause I got this error: "The multi-part identifier "A.ITEM6" could be be bound.
2. My second question: How to i get around this error?
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*, C.*
FROM PRODUCT A
CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B, fnSplitJson2(A.ITEM6,NULL) C
I am using Microsoft SQL Server 2008 R2 version. Windows 7 desktop.
I'd like to first figure out the count of how many rows are not the Current Edition have the following:
Second I'd like to be able to select the primary key of all the rows involved
Third I'd like to select all the primary keys of just the rows not in the current edition
Not really sure how to describe this without making a dataset
CREATE TABLE [Project].[TestTable1](
[TestTable1_pk] [int] IDENTITY(1,1) NOT NULL,
[Source_ID] [int] NOT NULL,
[Edition_fk] [int] NOT NULL,
[Key1_fk] [int] NOT NULL,
[Key2_fk] [int] NOT NULL,
[Code] .....
Group by fails me because I only want the groups where the Edition_fk don't match...
Here is My requirement, I'm not sure if this is possible. Creating table called master like col1, col2 col3, col4 , col5 ...Where Col1, col2 are updatable - this can be done easily
Col3, col4 are columns in another table but these can be just a read only ?? Is this possible ? this is possible with View but not friendly with share point CRUD...Col 5 is a computed column of col 2 and col5 ? if above step can be done then sure this can be done I guess.
I have query which retrieves multiple column vary from 5 to 15 based on input parameter passed.I am using table to map all this column.If column is not retrieved in the dataset(I am not talking abt Null data but column is completely missing) then I want to hide it in my report.
Can I do that??
Any reply showing me the right way is appricited.
-Thanks,
Digs
Hi, all experts here,
Thanks a lot for your kind attention.
As I am creating the non-clustered indexes for the tables, I dont quite understand how dose it really matter to put the columns in the index key columns or put them into the included columns of the index?
I am really confused about that and I am looking forward to hearing from you and thank you very much again for your advices and help.
With best regards,
Yours sincerely,
Here's another one of my bitchfest about stuff which annoy the *** out of me in SSIS (and no such problems in DTS):
Do you ever wonder how easy it was to set up text file to db transform in DTS - I had no problems at all. In SSIS - 1 spent half a day trying to figure out how to get proper column data types for text file - OF Course MS was brilliant enough to add "Suggest Types" feature to text file connection manager - BUT guess what - it sample ONLY 1000 rows - so I tried to change that number to 50000 and clicked ok - BUT ms changed it to 1000 without me noticing it - SO NO WONDER later on some of datatypes did not match. And boy what a fun it is to change the source columns after you have created a few transforms.
This s**hit just breaks... So a word about Derived Columns - pretty useful feature heh? ITs not f***ing useful if it DELETES SOME of the Code itself after there have been changes in dataflow. I cant say how pissed off im about that SSIS went ahead and deleted columns from flow & messed up derived columns just because the lineageIDs dont match.
Meta-data - it would be useful if you could change it and refresh it - im just sick and tired of it that it shows warnings and errors when there's nothing wrong - so after a change i need to doubleclick all my transforms so that those red & yellow boxes would disappear.
Oh and y I passionately dislike Derived columns - so you create new fields based on some data - you do some stuff - combine multiple columns to one, but you have no way saying remove the columns from the pipeline. Y you need it - well if you have 50K + rows with 30+ columns then its EXTRA useless memory overhead for your package.
Hopefully one day I will understand how SSIS works (not an ez task I say) - I might be able to spend more time on development and less time on my bitchfest - UNTIL then --> Another Day - Another Hassle with SSIS