Deploy Report Projects At Client End.
Dec 20, 2006
Hi,
We are using Microsoft Reporting Service 2005 to develop reports. The
reports are pointing to the Analysis Services database.
We want to move the report project developed to another machine. Basically
we want to deploy the reports at the client end.
I have found the below url that mentions the steps for SQL Server 2005
http://support.microsoft.com/kb/842425
Is this the only way to acheive the needed functionality or is there any
command line utility available that does this? or any other
simple procedure to do this?
We want to give the client, simple instructions to deploy the report project.
Any help would be appreciated.
Thanks in advance,
View 1 Replies
ADVERTISEMENT
Oct 16, 2015
I have converted the VS 2013 WinForm project to VS 2015. Once I installed it on client, report viewer is asking for Microsoft.ReportViewer.WinForms 12.0.0.0.With VS 2013 projects Report Viewer 2012 Runtime worked fine. I haven't been able to locate anywhere newer version of Report Viewer Runtime/
View 2 Replies
View Related
Oct 1, 2015
I want to deploy my database application to my client's computer. My application uses SQL Server 2014. My client has to run that software on a single PC. I was looking to download a lightweight version of SQL Server that can fulfill my requirements, so when I was looking for SQL Server downloads, I saw these files there, which file should I use in my situation
Express 32BIT WoW64SQLEXPR32_x86_ENU.exe
Express 32BITSQLEXPR_x86_ENU.exe
Express 64BITSQLEXPR_x64_ENU.exe
ExpressAdv 32BITSQLEXPRADV_x86_ENU.exe
ExpressAdv 64BITSQLEXPRADV_x64_ENU.exe
ExpressAndTools 32BITSQLEXPRWT_x86_ENU.exe
ExpressAndTools 64BITSQLEXPRWT_x64_ENU.exe
LocalDB 32BITSqlLocalDB.msi
LocalDB 64BITSqlLocalDB.msi
MgmtStudio 32BITSQLManagementStudio_x86_ENU.exe
MgmtStudio 64BITSQLManagementStudio_x64_ENU.exe
View 7 Replies
View Related
May 3, 2007
Hey All,
I'm tring to figure out the best way to organize my reports.
When I create a new Reporting Service Project throught the 2005 .NET IDE, I'm allowed to have 1 folder in the project to deploy to. I've tried adding folders under the default Reports folder, but I haven't found a way to do this. I'd like to be able to add more directories so I can deploy them right to the server, and they will be in the proper folders, with the correct access rights.
A developer here has offered the approach of One Report - One Project. I don't want to do this because the reports have so much in common, like datasources, that I don't want to be flipping back an forth from one project to the next.
I did also look to see if there was a way to assign a dircetory to each report, rather than the project level, but I didn't see way to do that. I also, tried to add folder through the Windows Explorer and see if I could get around this restriction, but no luck there either.
Anyway, How is everyone else organizing they projects?
Eric Wild
View 1 Replies
View Related
Jul 24, 2006
When I open BIDS it displays a list of "Recent Projects". How can I edit (or delete) items from this list? (Over time the list has acquired a lot of junk est projects that I no longer need).
TIA,
Barkingdog
View 1 Replies
View Related
Feb 20, 2007
Hello Reporting Services Gurus!
I'm about to start on my first reporting services project, but before I mess it up, I'm looking for some guidance on how best to achieve my mission. Here's what I'm looking to achieve:
I have a datacentric application (SQL Server 2005 Express w/ Advanced Services backend) in which I want to build about 50 "canned" reports for the end users. I want to build the reports utilizing server mode so I can take advantage of some of Reporting Services advanced features. I'm not sure what the best practice would be to build the reporting services project. Is it better to include the report project as another project within the application solution? Or, should I build the report project independent of the application solution? What are the pros and cons of doing it either way? How does including the report project build if it's included in the application solution? How would a ClickOnce deployment deploy the report project to the report server?
My ultimate goal would be to have an "off-the-shelf" software solution that includes an installation package consisting of the application project and report project. Is it even possible due to the Reporting Services architecture to achieve an install in this manner with ClickOnce, Windows Installer, or Installshield? Or, is building the report project indepedent of the application project and deploying the reports to the report server "manually" (i.e. deploy within the report server project) the only solution?
Any help would be greatly appreciated!
Tony
View 1 Replies
View Related
Jul 16, 2007
I am getting the following error when I attempt to deploy my test report.
"Failed to Deploy Report, The user 'XXX/IUSR_XXX' has insufficient rights to perform this action."
Has anyone gotten this error before, I have tried every permission option I could with the IUSR account by adding it to each folder etc ...and still get no resolve. Anyone have a fix for this bug ?
Responses are much appreciated!!
View 3 Replies
View Related
Feb 5, 2007
The current way I have my asp.net 2.0 web app running reports is, based on an
interface the user selects the criteria for a report. The .RDL file is created
dynamically based on the user's selections.
I then need to SOAP the dynamically created report to the report server and
then the report runs fine.
BUT it requires Adminstrative rights to do this. Can this be accomplished
without giving the local machine admin rights. I am sorry if this question
has been answered before but i have not been up here in a while.
View 1 Replies
View Related
Feb 13, 2008
I have a report model that I am trying to deploy using report manager web service. A folder is created by the administrator to place all my SSRS reports. I deployed .rdl files using the "Upload file" function in "Report Manager". All the SSRS reports work fine but when I tried to upload .smdl file (report model file) using the Report Manager's "Upload file" function it gave me the following error message.
The permissions granted to user 'xxxxxxman' are insufficient for performing this operation. (rsAccessDenied)
Does this mean I only have permission to upload .rdl file but NOT .smdl file to my designated folder?
View 6 Replies
View Related
Oct 15, 2007
I have made a report using Business Intelligence Development Studio in
SQL2005. When I deploy that report the report server, I got the error:
****************************************************************************************************************************
A connection cannot not be made to the report server http://servername.
Addition Information:
The server committed a protocol violation. Section=ResponseHeader detail=CR
must be followed by LF (System.Web.Service)
******************************************************************************************************************************************************
Then I use IE to open http://servername/reportserver , I get the following
message:
Server Error in '/ReportServer' Application.
--------------------------------------------------------------------------------
Runtime Error
Description: An application error occurred on the server. The current custom
error settings for this application prevent the details of the application
error from being viewed remotely (for security reasons). It could, however,
be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable
on remote machines, please create a <customErrors> tag within a "web.config"
configuration file located in the root directory of the current web
application. This <customErrors> tag should then have its "mode" attribute
set to "Off".
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom
error page by modifying the "defaultRedirect" attribute of the application's
<customErrors> configuration tag to point to a custom error page URL.
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
View 4 Replies
View Related
Jul 31, 2007
Hi, there;
I created a report using Report Sevice, but I cannot deploy it because of the security issue. If I try to open IIS, I got "Access Denied" message.
I checked another two developers' user settings, they are in the same user group as I am, but they can create/deploy report service.
So what should I need to create/deploy my report service?
cheers.
View 2 Replies
View Related
Jan 9, 2007
I am trying to set up Reporting Services. I am using SQL Server 2005 on Win XP Pro.
I installed service pack 2 for SQL Server 2005. The database looks to be set up in the configuration manager. When I try to deploy the report I get the following message:
A connection could not be made to the report server http://localhost/ReportServer
When trying to open the ReportServer folder in IIS I get another message:
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
Exception has been thrown by the target of an invocation.
Could not load file or assembly 'Microsoft.SharePoint, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specified.
I am not sure what SharePoint is and why I need it. I am just trying to set up simple reports on a local host SQL database and IIS on a standalone PC.
Any help appreciated.
Thanks
View 5 Replies
View Related
May 6, 2008
I have a report for reportserver. The preview is ok, the build is ok but when I made the deploy, I need a login, but I do not know what is this login Where I can change this login?
View 5 Replies
View Related
Dec 3, 2007
I am new for MS SQL Reports services. I have created a project with data source and reports using MS Visual Studio 2005 as reporting tool and MS SQL Server 2005 as database. Then I would like to deploy whole project (including data source and reports) to report web server. I put report server URL on the TargetServerURL for the project property. Then I tried to deploy it. I entered the user id and password on Reporting Services Login popup screen. Then I got error:
TITLE: Microsoft Report Designer
------------------------------
A connection could not be made to the report server http://testReports/Reports.
------------------------------
ADDITIONAL INFORMATION:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.ReportingServices.Designer)
------------------------------
The request failed with HTTP status 404: Not Found. (Microsoft.ReportingServices.Designer)
------------------------------
BUTTONS:
OK
------------------------------
I am not sure what problem is.
Thanks a lot for any help.
Jeanne
View 4 Replies
View Related
Feb 7, 2008
I've created a report and have the role of a 'global admin' however, when I try and deploy the report, I get an error message that I don't have permissions.
What other permissions do I need?
Thanks
Susan
View 4 Replies
View Related
Feb 12, 2007
HI there.
I am new to this.
I need to deploy a report to the web, however the Web Service Identity is not set up on my Reporting services configuration and I do not know how to set it up. WE are running SQL 2005 SP1.
Does any one have any documentation or tips on this.
THanks
View 12 Replies
View Related
May 31, 2007
I deployed a report i'd been practicing on and it worked fine. I then attempted to deploy it to production and was asked for user name and password. On the server i used for production I am an admin yet my credentials did nothing, just keeps asking for user and pass again.
Along the same lines I want to know how to allow people within our network to view production reports without needing to type in credentials.
View 6 Replies
View Related
Jun 1, 2007
Howdy!
My first attempt to deploy a report from SQL Server Reporting Services failed and I'm not sure what to change to fix the problem.
The error message reads: "A connection could not be made to the report server http://localhost/ReportServer."
Then under Additional INformation, it reads: "Client found response content type of 'text/html; charset=utf8', but expected 'text/xml'."
I also had a problem after I configured the Reporting Services. To confirm that the ReportServer database had been created, I tried to access http://localhost/Reports from Internet Explorer. The error message I get is: "The XML page cannot be displayed" Then it says that "a name was started with an invalid character. Error processing resource 'http://localhost/reports/'. Line 1, Postition 2."
I'm assuming that the latter problem is causing the former, but I don't know what to do to correct it. Can you help me out?
Thanks!
Mark
View 1 Replies
View Related
Feb 12, 2007
I have a report which works perfectly well within Visual Studio in design. However as soon as I try to deploy this to the Report Server it throws the following error:
w3wp!library!6!02/12/2007-16:29:17:: i INFO: Call to CreateReport( 'Defects by Application (Inactive and Active by Severity) Chart', '/AET Deployment', def)
w3wp!library!6!02/12/2007-16:29:17:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Data.SqlClient.SqlException: String or binary data would be truncated.
The statement has been terminated.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.DBInterface.CreateObject(Guid id, String shortName, String fullPath, String parentPath, Guid parentId, ItemType objectType, Byte[] objectContent, Guid intermediateSnapshotID, Guid link, String linkPath, ItemProperties objectProperties, String parameters, Byte[] createdBySid, String createdByName, DateTime creationDate, String mimeType)
at Microsoft.ReportingServices.Library.DBInterface.CreateObject(Guid id, String shortName, String fullPath, String parentPath, Guid parentId, ItemType objectType, Byte[] objectContent, Guid intermediateSnapshotID, Guid link, String linkPath, ItemProperties objectProperties, String parameters, String createdBy, DateTime creationDate, String mimeType)
at Microsoft.ReportingServices.Library.CatalogItemCreator.CreateItem()
at Microsoft.ReportingServices.Library.CreateReportAction._CreateReport(String report, String parent, Boolean overwrite, Byte[] definition, Property[] properties)
at Microsoft.ReportingServices.Library.CreateReportAction.CreateReport(Guid batchId, String report, String parent, Boolean overwrite, Byte[] definition, Property[] properties)
--- End of inner exception stack trace ---
I cannot identify any issues in the report definition which may indicate where data truncation may occur.
Any help appreciated.
View 4 Replies
View Related
Oct 23, 2007
Does anyone have a successful prescribed sequence for installing VS2005 and Business Intelligence Reports Projects on a Vista Business workstation to be used to create reports for a server?
I've looked through everything I can find here and I don't seem to see a clear solution without a lot of trial and error.
Fact is, I've not been successful getting just the reports to install on a plain XP box. Of course, the report creation looks fine on the server but I don't want to work directly on the server.
Thank you
View 1 Replies
View Related
Feb 19, 2007
I saw this posted about 6 weeks ago, but have not had the time to look. Could use some help.
TITLE: Microsoft Report Designer
------------------------------
A connection could not be made to the report server http://localhost/ReportServer.
------------------------------
ADDITIONAL INFORMATION:
Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
--
<html>
<head>
<title>Configuration Error</title>
<style>
body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px}
b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px}
H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }
H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon }
pre {font-family:"Lucida Console";font-size: .9em}
.marker {font-weight: bold; color: black;text-decoration: none;}
.version {color: gray;}
.error {margin-bottom: 10px;}
.expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }
</style>
</head>
<body bgcolor="white">
<span><H1>Server Error in '/ReportServer' Application.<hr width=100% size=1 color=silver></H1>
<h2> <i>Configuration Error</i> </h2></span>
<font face="Arial, Helvetica, Geneva, SunSans-Regular, sans-serif ">
<b> Description: </b>An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
<br><br>
<b> Parser Error Message: </b>An error occurred loading a configuration file: Failed to start monitoring changes to 'c:inetpubwwwrootweb.config' because access is denied.<br><br>
<b>Source Error:</b> <br><br>
<table width=100% bgcolor="#ffffcc">
<tr>
<td>
<code><pre>
[No relevant source lines]</pre></code>
</td>
</tr>
</table>
<br>
<b> Source File: </b> c:inetpubwwwrootweb.config<b> Line: </b> 0
<br><br>
<hr width=100% size=1 color=silver>
<b>Version Information:</b> Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
</font>
</body>
</html>
<!--
[HttpException]: Failed to start monitoring changes to 'c:inetpubwwwrootweb.config' because access is denied.
at System.Web.DirectoryMonitor.AddFileMonitor(String file)
at System.Web.DirectoryMonitor.StartMonitoringFile(String file, FileChangeEventHandler callback, String alias)
at System.Web.FileChangesMonitor.StartMonitoringFile(String alias, FileChangeEventHandler callback)
at System.Web.Configuration.WebConfigurationHost.StartMonitoringStreamForChanges(String streamName, StreamChangeCallback callback)
at System.Configuration.BaseConfigurationRecord.MonitorStream(String configKey, String configSource, String streamname)
at System.Configuration.BaseConfigurationRecord.InitConfigFromFile()
[ConfigurationErrorsException]: An error occurred loading a configuration file: Failed to start monitoring changes to 'c:inetpubwwwrootweb.config' because access is denied. (c:inetpubwwwrootweb.config)
at System.Configuration.ConfigurationSchemaErrors.ThrowIfErrors(Boolean ignoreLocal)
at System.Configuration.BaseConfigurationRecord.ThrowIfParseErrors(ConfigurationSchemaErrors schemaErrors)
at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
at System.Configuration.BaseConfigurationRecord.GetSection(String configKey, Boolean getLkg, Boolean checkPermission)
at System.Configuration.BaseConfigurationRecord.GetSection(String configKey)
at System.Web.Configuration.RuntimeConfig.GetSectionObject(String sectionName)
at System.Web.Configuration.RuntimeConfig.GetSection(String sectionName, Type type, ResultsIndex index)
at System.Web.Configuration.RuntimeConfig.get_HealthMonitoring()
at System.Web.Configuration.HealthMonitoringSectionHelper..ctor()
at System.Web.Management.HealthMonitoringManager..ctor()
at System.Web.Management.HealthMonitoringManager.Manager()
at System.Web.Management.WebBaseEvent.RaiseRuntimeError(Exception e, Object source)
at System.Web.HttpResponse.ReportRuntimeError(Exception e, Boolean canThrow, Boolean localExecute)
at System.Web.HttpRuntime.FinishRequest(HttpWorkerRequest wr, HttpContext context, Exception e)
-->
--. (Microsoft.ReportingServices.Designer)
------------------------------
BUTTONS:
OK
------------------------------
Thanks!
Terry
View 4 Replies
View Related
Oct 11, 2007
hye everyone..
may i know ,
where it store the report after we doploy it to server?
thank for reply
thank you very much
View 4 Replies
View Related
May 21, 2007
Hi!
I have the report server in Share Point integrated mode.
When I Deploy a report from a VS Report Server project by running
Visual Studio on the machine where reporting servicers is running, everything works fine.
But if I try the same thing on any other machine on the network, I get the following message:
TITLE: Microsoft Report Designer
------------------------------
A connection could not be made to the report server http://test/.
------------------------------
ADDITIONAL INFORMATION:
Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml' ( and so on....)
Do I need to install sp2 on the machine I'm trying to deploy from?
//C
View 6 Replies
View Related
Mar 28, 2008
I get a Report server login pop up Is there a default login and password for a default install of the report server? I am trying to deploy my report from my computer to our server. I can upload from my computer but can not deploy to the server.
View 3 Replies
View Related
Jul 23, 2005
When I try to put a new report in existing folder there's no problem,but now i have fresh installed Reporting Services and no Visual Studio2005. How do i open a new folder?
View 1 Replies
View Related
Feb 28, 2007
hi,
how can i publish my RS2005 reports with asp.net(2005) application.I am trying by creating virtual directory ,the aspx page runs but it is unable to access reports from report server
Is there any article on how can i deploy report with asp.net so that i can access report using aspx page remotely
pls suggest me
View 1 Replies
View Related
Feb 21, 2008
Hi All
I have a parameter @User givning a dropdown list from a dataset:
SELECT FullName FROM tvf_GetListOfUsers ('LDAP://OU=Business
Users,OU=Users,OU=Production,DC=MRP,DC=NET,DC=NZ','Subtree')
ORDER BY FullName
The parameter is passed to a second dataset when the User is chosen:
SELECT GroupName FROM tvf_GetUserMembership('LDAP://cn=' + @User +
',ou=business users,ou=users,ou=production,DC=MRP,DC=NET,DC=NZ')
ORDER BY GroupName
This works fine in VS but when I deploy it only works the first time.
That is, I enter the username and run the report - it brings back the
desired results. But when I enter a different username it just redisplays the
old data from the first username I entered.
Any ideas?
Thanks
Pete
PS The funcions above called in the datasets are for querying Active
Directory but I think this is not the cause of the problem.
View 1 Replies
View Related
Nov 27, 2007
Hi!
Using VS2005, trying to make simple reports :
TITLE: Microsoft Report Designer
------------------------------
A connection could not be made to the report server http://<myNonLocalServer>/ReportServer.
------------------------------
ADDITIONAL INFORMATION:
The request failed with HTTP status 400: Bad Request. (Microsoft.ReportingServices.Designer)
Have no problems to access http://<myNonLocalServer>/ReportServer and http://<myNonLocalServer>/Reports
This is an new installation of reportserver.
Configure Report Server:
All green, but
SharePoint Integration: blue
Encryption Keys : blue
Email Settings : yellow
Execution Account: yellow
Platform: Windows Server 2003 Standard x64 Edition
SQL Server: SS2005
@@version says: Microsoft SQL Server 2005 - 9.00.3042.00 (X64) Feb 10 2007 00:59:02 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
Visual Studio on my local pc:
Microsoft Visual Studio 2005
Version 8.0.50727.42 (RTM.050727-4200)
Microsoft .NET Framework
Version 2.0.50727
Installed Edition: Professional
Microsoft Visual Basic 2005 77718-204-0000007-41260
Microsoft Visual Basic 2005
Microsoft Visual C# 2005 77718-204-0000007-41260
Microsoft Visual C# 2005
Microsoft Visual C++ 2005 77718-204-0000007-41260
Microsoft Visual C++ 2005
Microsoft Visual J# 2005 77718-204-0000007-41260
Microsoft Visual J# 2005
Microsoft Visual Web Developer 2005 77718-204-0000007-41260
Microsoft Visual Web Developer 2005
Crystal Reports AAC60-G0CSA4B-V7000AY
Crystal Reports for Visual Studio 2005
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 9.00.2047.00
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 9.00.2047.00
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 9.00.2047.00
...
Report-solution-property:
TargetServerURL: http://<myNonLocalServer>/ReportServer
How to deploy??
View 1 Replies
View Related
Mar 24, 2007
Suppose we are two developer.Who have SSRS install at there own system.
Our database server is intalled on our main db server.
1,First thing does it necessay to create a shared datasource.
I have a web application in which I want's to add a folder say My reports in which i will put my reports {that is .rdl file}
Then I want's to hit a url with render format as excel this will bring down my report in excel format.
2,How to configure a connection
I want's to pass the connection string in the rdl via some xml file let say myconnectionn xml file
which look like
<connection-sources>
<source name="Mycon1" default="true" >
Data Source=abcyukon;User ID=sa;Password=as;Initial Catalog=MyDbName1
</source>
<source name="Mycon2" skip="true" >
Data Source=asdsadabcyukon;User ID=sa;Password=as;Initial Catalog=MyDbName2
</source>
</connection-sources>
connection string would be where attribute default of source should be true.
View 5 Replies
View Related
Jan 22, 2008
What permissions do I need on my SSRS server to deploy from VS2005. Currently I get the following error when I try to deply:
The permissions granted to user 'ReportServerNameUser' are insufficient for performing this operation.
I figure it is something simple that I am missing.
Thanks in advance!
Ustes
View 1 Replies
View Related
Mar 24, 2008
Hi, we are deploying in an external server a report model and some reports developed with it.
We already have a procedure to deploy the model and reports one by one using upload files feature, we are worried about not to deployed all reports we have to (mistake in manual process). Is there a way to automatize this process?, a command, a program o somethink like this?.
Thanks in advance.
Julio
View 3 Replies
View Related
Jan 10, 2008
Hi,
just wanted to know,
Is it possible to deploy a report develped by 2008 on to ssrs 2005 server, if so does it work fine.....?
View 3 Replies
View Related
Apr 11, 2007
I am having mucho difficulties deploying Report Models from my box.
I create a brand new report model project, I add a data source, a datasource view, and a report model. Everything builds fine. I setup the project to point to a valid SSRS Server (and I tried this on another person's box, everything worked fine), click deploy- enter the credentials, and the logon box just keeps popping back up instead of deploying.
When the credential box pops up, it has a "" in it. When I try this on another person's box, it works fine.
I just upgraded to SQL Server 2005 SP2, but I do not have Visual Studio 2005 SP1.
Could some of that be a problem?
View 1 Replies
View Related
