Hello, I created a new Rs server, but when I try to deploy from visual studio, it asks me for username and password multiple times and never deploys.
I am an administrator on the RS server, even on the report folders.
I can access via IE to the report manager.
This seems to be a basic issue, but I am having a problem trying to deploy a report to Reporting Services.
I have setup the deployment options under the properties of the Project. But each time I try to deploy a report, I get "The request failed with HTTP status 504: Gateway Time-out"
When I try to connect to connect directly to the TargetServerURL via a web browser from my client or the server itself, I can browse the structure fine. Not sure why I can't deploy via Visual Studio.
Thoughts?
Thanks
i need a regex support in SQL 2005 server.
i've downloaded SQL regex support project from http://msdn.microsoft.com/msdnmag/issues/07/02/SQLRegex/default.aspx?loc=en.
but in order to enable regex support i needed to open VS 2005. compile the project and deploy it to SQL server. now i can use Regexp-s in SQL queries.
However this is not elegant way to deploy everytime SQL Database project via Visual Studio to every MS SQL server i want.
my question is : how can i deploy without using Visual Studio?
Hi
Having finally managed to get over the hump of getting Sharepoint integrated mode working in a farm install, I am having a problem deploying reports from Visual Studio to Sharepoint.
I have set the deploy properties as follows:
TargetDataSourceFolder: http://ppdwn-bl10:8888/ReportTest/Data Sources
TargetReportFolder: http://ppdwn-bl10:8888/ReportTest/Harvest Reports
TargetServerURL: http://ppdwn-bl10:8888/
Visual Studio is updated to Service Pack 2, as is of course the report server.
The reports APPEAR to deploy - they actually appear in the document library after deployment! But the result is:
------ Build started: Project: Harvest Reports, Configuration: Debug ------
Build complete -- 0 errors, 0 warnings
------ Deploy started: Project: Harvest Reports, Configuration: Debug ------
Deploying to http://ppdwn-bl10:8888/
Deploying data source 'http://ppdwn-bl10:8888/ReportTest/Data Sources/ReportWarehouse.rsds'.
Report Server has encountered a SharePoint error.
Deploying report 'http://ppdwn-bl10:8888/ReportTest/Harvest Reports/ColourBreakdown.rdl'.
Report Server has encountered a SharePoint error.
Deploying report 'http://ppdwn-bl10:8888/ReportTest/Harvest Reports/ColourBreakdownSaleable.rdl'.
Report Server has encountered a SharePoint error.
Deploying report 'http://ppdwn-bl10:8888/ReportTest/Harvest Reports/FaceBreakdown.rdl'.
Report Server has encountered a SharePoint error.
Deploying report 'http://ppdwn-bl10:8888/ReportTest/Harvest Reports/LustreBreakdown.rdl'.
Report Server has encountered a SharePoint error.
Deploying resource 'http://ppdwn-bl10:8888/ReportTest/Harvest Reports/paspaley.gif'.
Report Server has encountered a SharePoint error.
Deploying report 'http://ppdwn-bl10:8888/ReportTest/Harvest Reports/ShapeBreakdownByPercentage.rdl'.
Report Server has encountered a SharePoint error.
Deploying report 'http://ppdwn-bl10:8888/ReportTest/Harvest Reports/ShapeBreakdownByPM.rdl'.
Report Server has encountered a SharePoint error.
Deploying report 'http://ppdwn-bl10:8888/ReportTest/Harvest Reports/Summary.rdl'.
Report Server has encountered a SharePoint error.
Deploy complete -- 9 errors, 0 warnings
========== Build: 1 succeeded or up-to-date, 0 failed, 0 skipped ==========
========== Deploy: 0 succeeded, 1 failed, 0 skipped ==========
Unfortunately I cannot view the reports in Sharepoint - I can see them in the document library but when I click them I get the same error, except in the web browser. "Report Server has encountered a SharePoint error".
The Report Server log shows the following:
w3wp!library!1!03/06/2007-09:38:24:: Call to GetPermissionsAction(http://ppdwn-bl10:8888/ReportTest/Harvest Reports/ColourBreakdown.rdl).
w3wp!library!1!03/06/2007-09:38:24:: Call to ListParentsAction(http://ppdwn-bl10:8888/ReportTest/Harvest Reports/ColourBreakdown.rdl).
w3wp!security!a!03/06/2007-09:38:24:: i INFO: Exception while running with elevated privileges
w3wp!security!a!03/06/2007-09:38:24:: i INFO: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
w3wp!library!a!03/06/2007-09:38:24:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error.
w3wp!security!a!03/06/2007-09:38:25:: i INFO: Exception while running with elevated privileges
w3wp!security!a!03/06/2007-09:38:25:: i INFO: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
w3wp!library!a!03/06/2007-09:38:25:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error.
Any help would be appreciated.
Thanks
Adam
I have converted the VS 2013 WinForm project to VS 2015. Once I installed it on client, report viewer is asking for Microsoft.ReportViewer.WinForms 12.0.0.0.With VS 2013 projects Report Viewer 2012 Runtime worked fine. I haven't been able to locate anywhere newer version of Report Viewer Runtime/
View 2 Replies View Related
someone please tell me how
im using primavera V5.0 (www.primavera.com) and i want to export the data from the .net to primavera and versa versa
please tell me soon
i have created a database endpoint that just retuns some data. i am trying to call this endpoint as a web service in visual studio by adding a web reference, but i cannot find my endpoint. it seems to just check iis for endpoints, but how do i make it look for my sql endpoint? here is the code for my endpoint.
create endpoint testEndpoint authorization [FINTAN-PCFintan]
state=STARTED
as http
(
path ='/sql',
authentication=(INTEGRATED),
ports = (CLEAR),
site='SERVER'
)
For SOAP
(
webmethod'ProvideSQLData'(name='adventureWorks.dbo.testEndpointProcedure'),
WSDL=DEFAULT,
SCHEMA=STANDARD,
DATABASE='adventureworks',
NAMESPACE='http://thenamespace.org'
);
GO
the account that visual studio is running under has been granted connect permissions on the endpoint. can anyone say where im going wrong here?
We have a large number of SPs in our databases and decided it was time to get some source control. I have VSTS team explorer installed and working in visual studio, but I cannot get the plugin for SSMS to work - it just says none in the current source control plug-in dialogue box - nothing when I drop it down either.
Any ideas what I am doing wrong?
We are new to SQL Server 2005 Express Edition. We are going to develope a solution for one of our client and we have to decide on which database to use for the solution. Client wanted to have a low cost solution. Thus we were not in a position to push them for SQL Sever 2000.
In the process, we also thought of having MySQL as one of the option. Another option we have is to use SQL Server 2005 Express Edition.
We wanted to know if SQL Server 2005 Express Edition can be used with Visual Studion 2003 (Ver 1.1) or it can only be used with Visual Studio 2005 (Ver 2.0)?
Hope to get feedback soon.
Regards
Sanjeev
I want to export file such as .csv, xml , word from ReportViewer in visual studio 2008 but when I run on ASP.NET .net framework 2.0, it can export only excel & pdf files. But in business intelligent project in Visual Studio 2005 I can export all files that I want.
How can I export file from reportviewer in visual studio 2008 run on web application?
Regards,
NPeng
I am getting the following error when I attempt to deploy my test report.
"Failed to Deploy Report, The user 'XXX/IUSR_XXX' has insufficient rights to perform this action."
Has anyone gotten this error before, I have tried every permission option I could with the IUSR account by adding it to each folder etc ...and still get no resolve. Anyone have a fix for this bug ?
Responses are much appreciated!!
I have a ssas tabular model as a data source in a .pbix-file. I have uploaded the .pbix-file to Power BI Services and it works fine as long as my visual studio project is open. If I close my visual studio project, the objects in Power BI Services will say "The data recievement for this visual information was not successful."
View 2 Replies View RelatedAm getting errors trying to deploy a dtsx created by ms (the reporting services execution log one) to which I have made zero changes, but it is not working (2 errors shown below)
error from deployment wizard:
===================================
Could not save the package "H:SSISRSlogRSExecutionLog_UpdateinDeploymentRSExecutionLog_Update.dtsx" to SQL Server "xxxxxxxxxxx". (Package Installation Wizard)
===================================
The SaveToSQLServer method has encountered OLE DB error code 0x80004005 (Login timeout expired). The SQL statement that was issued has failed.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToSqlServer(Package package, IDTSEvents events, String serverName, String serverUserName, String serverPassword)
at Microsoft.SqlServer.Dts.Deployment.DtsInstaller.SavePackageToSqlServer(WizardInputs wizardInputs, String packagePassword, Boolean bUseSeverEncryption, String serverName, String userName, String password, String packageFilePath, List`1 configFileNames)
at Microsoft.SqlServer.Dts.Deployment.DtsInstaller.InstallPackagesToSqlServer(WizardInputs wizardInputs)
===================================
The SaveToSQLServer method has encountered OLE DB error code 0x80004005 (Login timeout expired). The SQL statement that was issued has failed.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.SaveToSQLServer(IDTSPackage90 Package, IDTSEvents90 pEvents, String ServerName, String ServerUserName, String ServerPassword)
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToSqlServer(Package package, IDTSEvents events, String serverName, String serverUserName, String serverPassword)
error from sql management studio
===================================
Invalid access to memory location. (Exception from HRESULT: 0x800703E6) (Microsoft.SqlServer.ManagedDTS)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToDtsServer(Package pPackage, IDTSEvents pEvents, String sPackagePath, String sServerName)
at Microsoft.SqlServer.Dts.ObjectExplorerUI.ImportPackageAsAction.ImportPackage(ImportPackageAsForm dlg)
I ask because I'm still looking for the source of interface problems I have in using the SSIS designer.
View 4 Replies View Relatedwhen I try to make a sqldatasource with visual studio 2008 and SQLServer 2008 . I found that there are a message that the visual studio 2008 can support only SQLServer 2005 and SQLServer 2000how to make my visual studio 2008 support SQLServer 2008
View 1 Replies View Relatedi am new at T-SQL and am trying to delete entries in a column that are not integers. i have the following code. why does it not work.
T-SQL
select invoicenumber from [control register] where convert(int, invoicenumber) like '%'
if @@error > 0
begin
delete from [control register] where invoicenumber = invoicenumber
end
go
gives me the error in Query analyser:
Server: Msg 245, Level 16, State 1, Line 1
Syntax error converting the nvarchar value '10-3-05' to a column of data type int.
@@error is supposed to pick up the error. why is it not.
please could you reply urgently at chris@captivedesign.co.za
thanks in advance
Chris Morton
can someone tell me why this sql statement doesnt work?
SQL = "SELECT (Count(department_id) as 'totals' FROM nonconformance WHERE department_id = '7'),(Count(department_id) as 'totals2' FROM nonconformance WHERE department_id = '1') FROM nonconformance"
How do I fix it?
Thanks
Can someone tell me why this thing in the end return Null?
declare @uz_id uniqueidentifier
set @uz_id=null
set @uz_id=
case @Uz_ID
when null then '00000000-0000-0000-0000-000000000000'
else @Uz_ID
end
select @uz_id
...it should return '00000000-0000-0000-0000-000000000000' in my opintion
P.S. When I say return i mean the value that is shown after 'select @uz_id' is executed:)
This is an insert statement i'm trying to run. I want it to only insert this recird if the corresponding EMPLOY_REF exists in the EMPLOYEE table. Heres my statement:
INSERT INTO SALHISTY(EMPLOY_REF, SALARY, SAL_REASON, SAL_DATE)
VALUES ('8971','175000.0000','ANNRV','2007-04-01 00:00:00.000')
WHERE '8971' IN (SELECT EMPLOY_REF FROM EMPLOYEE)
This is the error message i'm getting.
Server: Msg 156, Level 15, State 1, Line 3
Incorrect syntax near the keyword 'WHERE'.
Any help would be greatly appreciated. Thanks
select distinct
a.Patients,
b.Patients,
a.pct,
b.pct
from
(
select count(*) as Patients, [pct of res] as pct
from testing
where [18 week wait] <= 18
group by [pct of res]
) as a right outer join
(select distinct[pct of res] from testing) as c on a.pct=c.[pct of res]and a.pct <> 'null' --is not null
(select count(*) as Patients, [pct of res] as pct
from testing
where [18 week wait] >18
group by [pct of res]
) as a left outer join as b on c.[pct of res]=b.pct
I have the following in my commandtext but it doesnt seem to replace the LanguageColumnName variable: Dim cmd As New SqlCommand("SELECT '+@LanguageColumnName+' FROM tblSports a INNER JOIN tblUsersAndSports b ON a.SportID=b.SportID " & _ "WHERE b.UserCode=@UserCode", MyConnection) cmd.Parameters.Add(New SqlParameter("@UserCode", UserCode)) cmd.Parameters.Add(New SqlParameter("@LanguageColumnName", LanguageColumnName))I have tried '+@LanguageColumnName+' and also just @LanguageColumnName but this variable isnt replaced for some reason.The value of LanguageColumnName is "de"...the funny thing is that when I just type my command like the following it DOES work..:SELECT de FROM tblSports a INNER JOIN tblUsersAndSports b ON a.SportID=b.SportID " & _ "WHERE b.UserCode=@UserCodeWhat am I doing wrong?
View 1 Replies View RelatedI have my db in a pocket pc wm5.0, I just want to make a simple query
select * from table
where pk = '1'
but this doesnt work, if you tried any other field else than the primary key
it works... WHY???
would it be a problem with the sdf file? help please!!!
Hi,
I have an issue. When I am performing a Merge Join using two fields of type
DT_WSTR on both sides of the Join, the Dataviewer after the Join only shows the left side 2 key
fields having values populated but both fields from the right hand side as being NULL. The Dataviewers I put in before the join show both sides of the join fields being populated ( 2 sides x 2 fields ). If I remove one of the fields from the join it shows both fields from the left side and the right side of the join being populated . I am trying to knock out duplicate values from the insert using 'genuine' Nulls from the right hand side so I need both parts of the 'Key'. I have checked the adnvanced tab that ignores Case etc but has had no effect.
I am using the technique from here : http://www.sqlis.com/311.aspx
Is this an SSIS bug ??? It is driving me up the wall.
Help would be much appreciated please.
Thanks
Jon
HI All,I have started sqlserver in single user mode and changed filename in sysaltfiles for tempdb too point to new location. While starting sqlserver in normal it points to the old path and doesnt get updated with the new path.1.)is there any systable still to be altered???2.) i have even tried alter database, doesnt work.3.)The master files have been taken from server1 (where tempdb points to d:data) to server2 ( where i need to point tempdb to point E:mssqldata). i can detach and attach msdb and model successfully, but in the case of tempdb, i cant either alter sysaltfiles or detach and attach tempdb to new path., too tired in trying all the possiblities... Is there any possibility to update tempdb to point to new path???
View 5 Replies View Relatedhi there,
i've made a report containing a subreport. the subreport is in a table. the table headers should repeat. but if the subreport expands more than one site, the table header doesnt repeat.
okay. i could place the table header in report header, but in report header i cant use fields from a dateset.
thanks for any idea, tobi
hi, i hope this is the correct forum?i have developed a small asp.net 2.0 web site with vwd using sqlExpress which appears to just bean data file and a log file in my app_data directory. there are two databases, the users one that is created by the login manager and my own that i created to store data. this all works fine on my laptop. i have an xp-pro machine setup with IIS and the frontpage web extentions, i have also installed the .net framework v2.0 on it and done all the windows updates. i have given app_data read/write access for the aspnet and network service users.i used the copy site feature of vwd to install on the xp box and although the site seems to workwhen it needs to bind a gridview to my sqldatasource it gives an error Cannot open user default database. login failed.Loginfailed for user 'rlxpaspnet'Any ideas? i have googled and tried all sorts, but to no avail, so i throw my self on your mercy!Cheers,russ
View 5 Replies View RelatedHello all!
I've a problem with my database. Till yesterday the option for Auto Grow of Database (10 %) was working very fine, but now it seems to be some problems with it. Finally I had to specify a restricted size for the database and then it again startd to give me some space in the database to write in. Ideally it should have worked automatically, isnt it ???
There is no problem with the space on the drive, I still have some 76 gb of free space there ...
Thanks in advance ...
Anjä
Hi ,
In the below procedure in emp table name column is not null.
so when i try to update null value it should rollback previous transactions and should not commit.
but it is updating the previous queries and raising error on 3rd query. not rolliing back. I need to rollback previous queries.
the xactstate i get here is 1.
Please help me with this.
ALTER PROCEDURE [dbo].[tran]
AS
BEGIN
SET NOCOUNT ON;
BEGIN TRY
BEGIN TRANSACTION
declare @name varchar(50)
set @name = null
update dept set dname='ddd' where id=10
update emp set name='eee' where id=354
update emp set name=@name where id=354
COMMIT TRANSACTION
END TRY
BEGIN CATCH
IF (XACT_STATE())=-1 ROLLBACK TRANSACTION
END CATCH
END
venp---
Hi ,
Hello, I tried this and it doesnt work, I just started up the service with -T flag on default instance but I havent been able to start it with -T flag 1400 on named instances.
How can I Know that the directory MSSQL.4 is the MIRROR instance??
C:Archivos de programaMicrosoft SQL ServerMSSQL.4MSSQLBinn>sqlservr.exe -T
1400 MIRROR
I tried LUCHOMIRROR, MSSQLSERVER$MIRROR
and It doesnt work
Thanks
Another question I have, in the documentation it says that mirroring is only for evaluation purposes and not for production environments, what does it suppose to mean? MSFT didnt test the mirroring feature enough? If its not suppoerted why its included..?
Microsoft support policies do not apply to the database mirroring feature in SQL Server 2005. Database mirroring is currently disabled by default, but may be enabled for evaluation purposes only by using trace flag 1400 as a startup parameter. (For more information about trace flags, see Trace Flags (Transact-SQL).) Database mirroring should not be used in production environments, and Microsoft support services will not support databases or applications that use database mirroring. Database mirroring documentation is included in SQL Server 2005 for evaluation purposes only, and the Documentation Policy for SQL Server 2005 Support and Upgrade does not apply to the database mirroring documentation.
Hello everybody,
have following problem:
I need info from 2 Tables. from the Table 2 I just need 1 column. When i ask for this column the output I get is data repeating themselve many times.
Distinct, should give me unique data, but is doesnt....
the code:
SELECT DISTINCT FSenddate, FSupplyIDName, FSupplyerNumber,FBillNo,FSourceBillNo,FItemName,FItemModel,
FAuxQty,FAuxTaxPrice,FHeadSelfP0237
FROM vwICBill_26
WHERE FSenddate BETWEEN DATEADD(dd,-14,GETDATE()) AND GETDATE()
This code just works in Table1 (vwICBill_26)
but with table 2 (vwICBill_1)
SELECT DISTINCT vwICBill_26.FSenddate,vwICBill_26.FSupplyIDName,
vwICBill_26.FSupplyerNumber,vwICBill_26.FBillNo,
vwICBill_26.FSourceBillNo,vwICBill_26.FItemName,
vwICBill_26.FItemModel,vwICBill_26.FAuxQty,
vwICBill_26.FAuxTaxPrice,vwICBill_26.FHeadSelfP0237,
vwICBill_1.FDate,vwICBill_1.FContractBillNo
FROM vwICBill_26,vwICBill_1
WHERE vwICBill_26.FSenddate BETWEEN DATEADD(dd,-14,GETDATE()) AND GETDATE()
AND vwICBill_1.FContractBillNo=vwICBill_26.FSourceBillNo
The last sentence is the problem
I want that it shows me the data that is not equal.
As soon as I implement the not equal it shows me the massive repeating data.
I mean even without the last sentence I get this data output.
All together, I want a clear database output without data repeating.
Any ideas how it may work without DISTINCT?
I think this problem is a typical amateure problem, but I would apreciate help!
Hello, I am trying to make this.
CREATE PROCEDURE [dbo].[P_SEL_ALLPERSONAS]
@nmpersona int,
@sortorder varchar(20)
AS
BEGIN
select nmpersona, dsprimernombre, dssegundonombre,
dsprimerapellido, dssegundoapellido
from personas
order by @sortorder
END
But I got this error. Please help
Msg 1008, Level 16, State 1, Procedure P_SEL_ALLPERSONAS, Line 13
The SELECT item identified by the ORDER BY number 1 contains a variable as part of the expression identifying a column position. Variables are only allowed when ordering by an expression referencing a column name.
Hi,
The distributed query seems to work on the management studio of the server where I have linked the other server to but not accross the network on other management studio with the same impersonated logins. The error I get is.
OLE DB provider "SQLNCLI" for linked server "usbo-sql01" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
Msg 18452, Level 14, State 1, Line 0
Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
I am having the same problems as those in another post. SSIS package works fine when executed in BIDS and through execute package utility but it doesnt work when executed as a step in a job.
The other problem is that the logging also doesnt work when i try executing it as a job. So I have no clue about what to do without knowing what error it is. When I run the job it simply says the step has failed.
I have tried most of the solutions posted in other websites most of them to do with using proxies with credentials but havent hit a solution. I would love to get any input on what to do.
Thanks