I have created several reports using SSRS which is installed in my local machine. But source data base is in the main server. Data source connection works properly. Report manager is also configured to local machine.
Now I tried to deploy these reports to main server. So I changed the target URL to http://mainservername/reportsserver in the internal report property change box. But it was not succeeded. I get a error message like this.
------ Build started: Project: Partner Reports -Internal, Configuration: Production ------
Build complete -- 0 errors, 0 warnings
------ Deploy started: Project: Partner Reports -Internal, Configuration: Production ------
Deploying to http://derby/ReportServer
Error rsRPCError : The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled)
Here's my problem. I have an SSRS report with subreports on it. The main report and subreports work fine on my machine when I run the main report. However, when I deploy them to our test server and change the server name of the shared datasource, only the main report brings back data. The subreports show an error of something like "Error in displaying the subreport" for each subreport. The subreports require parameters that I believe I am supplying from the main report. What am I doing wrong? Is it really necessary to deploy the subreports with the main report to the new server. With Crystal Reports, I didn't have to do this. Any thoughts or suggestions would be appreciated.
I installed SQL reporting services 2005 and successfully configured reporting services.After designing the report using Bussiness Intelligence Studio, i tried to deploy my reporting services application to the localhost , I got the below mentioned error :
TITLE: Microsoft Report Designer ------------------------------
A connection could not be made to the report server http://localhost/ReportServer.
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.ReportingServices.Designer)
------------------------------
The request failed with HTTP status 404: Not Found. (Microsoft.ReportingServices.Designer)
I've seen some similar posts to this one, however none with an answer and I'm wondering if anyone has actually figured out what causes this issue. I'm running SQL Server 2005 Reporting Services.
I'm attempting to implement a folder structure for the report server, therefore am creating individual solutions in Visual Studio for each folder. At the top level i.e http://servername/reportserver/ I am able to deploy reports no problem.
However creating a folder at the next level in the tree and then deploying to that level such as http://servername/reportserver/ManagementReports causes a Reporting Services Login prompt to appear. No matter what user credentials I enter they are not accepted. I have full administrator rights the server, the site and the folders in question.
Has anyone else experienced this? Does anyone have any suggestions?
I have developed a custom report item that works fine in design and preview mode while in Visual Studio. I cannot get it to show up on my deployed reports. Here's what I have done so far:
1. Deployed the report using Visual Studio
2. updated the rsreportserver.config file with the following entry:
I've also tried using the StrongNameMembershipCondition with no better results.
4. The dll and its dependencies are copied to the bin directory of the report server.
5. When I load a report with this custom report item on it, the report loads fine with no errors or warnings in the log file (even with verbose tracing). The area where the custom item should be is just white. It's almost like Reporting Services isn't registering the item correctly.
This is particularly frustrating because the report works fine in Visual Studio - apparently I configured that correctly. Any suggestions would be greatly appreciated. I'm stumped.
I just created a report builder. I have a main report and i wanted to create a sub report. why i cant or i cant view the path or the folder of my .rdl file to be use as my sub report.
I am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
How do I get data on my linked report based on my grouped subtotal and grand total from the main report. The subtotal and grand total are calculated columns.
I have a 3 columns in my matrix in the SSRS summary report. Actn_COAST, ActnCITY and NumbOfAccts.
The following is code for my summary report. The results are shown below.
SELECT Distinct ActnCITY, Count(ACCT) as NumbOfAccts, CASE WHEN ActnCITY in ('NY', 'OH', IN, 'NJ', 'SC', 'NC') THEN 'EAST COAST' WHEN ActnCITY IN ('CA'. 'NV', 'UT', 'WA', 'OR') THEN 'WEST COAST' ELSE 'OTHER' END AS Actn_COAST
FROM tbl1 where ACTNDATE between @STARTDT and @EndDT
Code for my detail report contains the following SQL
SELECT * FROM tbl1 where ACTNDATE between @STARTDT and @EndDT AND @ActnCITY = ActnCITY
I have linked my report based on the NumbOfAccts column. I am able to get data if I click any of the NumbOfAccts values related to the state I want. However when I am not sure how to make the subtotal and grand total work. I want when I click on the subtotal of either coast, I should be able to see records of that coast e.g., if I select 37 I should be able to see all the records in East Coast. If I click on the Grand Total, I only want data related to those 2 coasts.
I have a SSRS report with 4 sub reports embedded. Previously i faced a situation where sub reports was getting displayed with static data even if there is no data being pulled from data set. I solved this problem according to solution provided in my previous post here. Now blank space is getting displayed in place of empty sub report. But still the main report that hosts empty sub report (Which has a header with header name coming from main data set) is getting displayed. Is there any way wherein the whole main report can be suppressed when the sub report has no data?
Deploying to http://localhost/ReportServer Deploying data source '/Report Project1/cnt_SDS_REQUEST'. The Report Server Web Service is unable to access secure information in the report server. Please verify that the WebServiceAccount is specified correctly in the report server config file.
I have 11 records in the Main report.I want to make Imagebutton for only the 11 record.If click on Imagebutton then the subreport show in the below.But there is no relationship between MainReport and SubReport.
I have a really cool Budget report which has two matrices on it. One is used/visible if the user selects four levels of grouping, and one is used if the user selects only three levels of grouping. The four choices for grouping are four fields, Par, FERC, Point, and Resource.
Since grouping is optional, I need a way to pass the parameter for a field that is not grouped on from the main report to the drillthrough report. For example if the user chooses to group on all fields but Point, I need to pass the report parameter that was used by the main report for Point to the drillthrough report as a report parameter.
So, I tried testing the three grouping levels values and if none were equal to "Point" then pass in the parameter by putting the following expression in the Parameter Value box for the Point parameter on the Navigation tab of the datacell of the main report that is the drillthrough link:
=iif( Parameters!GroupLevel1.Value <> "Point" and Parameters!GroupLevel2.Value<>"Point" and Parameters!GroupLevel3.Value<>"Point" , Join(Parameters!PNTPoint.Value,",") , Fields!Point.UniqueName )
But this is not working; the drillthrough report shows a blank dropdown for the Point parameter and I have to manually set it. Does anyone see an error in the syntax of the iif statement?
Any references, links, resources or good clean jokes would be greatly appreciated.
Does anyone know a way to display the header of a sub report when the sub report is part of a main report? Im able to get the main report and the sub report to display properly, but the header of the previously developed/tested sub report will not display when embedded in a main report.
Hello All, I am having an issue deploying reports to my Production server via VS 2003 IDE.
The scenario is that I have a dev box with all 3 components installed on the same server(VS 2003, SQL 2000, sp3 , IIS and Report Server). I have no problem deploying to this Dev server. Now I need to deploy them to a different server(Release) in a different Domain. The Release implementation is, IIS and Report Services installed on one Server and SQL instance on a different server , but both IIS and SQL server are in the same domain. So in my VS 2003 IDE I choose a project/solution and then right click to Deploy I get an error " A connection could not be made to the report server <server URL>". My Solution Property page "Target Server URL " is pointed to this Release server virtual directory(http://Release:81/Reports). This Relase IIS web server has different web site, I installed the RS in the Default website. I can browse RS server(http://Release:81/Reports) from anywhere via web and get to Site settings and all, But I cannot deploy from VS2003. Am I missing anything? Earlier I used to get at least log-in credentials to enter my UID and PW, as I provide them I never got anything back, it keeps asking me for UID and PW. Now I straight away get "Conection could not be made" error.
I have a Report Server when i try to deploy my report on the same server and if i use the Fully Qualified Domain Name in my report path i get the below Error
We have many domain users who develop/deploy reports using VS2003 to our remote server at https://server/reportserver with no problems at all.
A single workstation on the domain that been used to develop reports cannot deploy though. The message looks fairly simple to diagnose "no report server was found at https://server/reportserver". I have checked dns and the servername resolves no problem. I have manaully edited and added the server to the hosts file also. I have updated and service packed all VS elements (VS2003 7.1.6030).
The server is contactable in all ways on this workstation, all ip/dns settings are the same as other domain workstations.
Can anyone point me in the direction of log files to look at, or if i am missing any basic options in VS. I have checked all deployment settings from other workstations.
Don't know if this is possible or not - Need to produce a report and the main report has a grid in it.
For every row in the main report, in one of the grid fields there are n images. So to do this, I am using a sub-report. But there is a problem with going to the database for every row to fetch images that if the user does a report spanning more than about 6 months, there will be thousands of records each with the potential to have many images and the constant round trips to the db server would probably kill it.
So what I want to achieve is to fetch the dataset in the main report with just one trip to the database and then pass the dataset filtered by a uniqueidentifier to each row of the subreport.
Could someone please let me know if this or something like it is possible and how to go about it?
I have a main report that has 17 sub-reports in it. I have had some problems with additional space in the main report, after sub-reports that have no data in them. In the actual sub reports I have expressions set up for each line in the tables to hide the row if there is an empty string in it. (IIF(Fields!FieldName.Value = "", True, False)).
Is there a way to set up in the main report is the sub report has no data in it to hide the sub-report, and not show the additional space in them. I have tried putting the sub reports in the main report by themselves, and also put them into a table, and have encountered the same results each time.
I did find a site that suggests referencing a Field in the expression for that row, but this would involve us changing the stored procedure and adding additional Fields into the main report stored procedure. Also each sub-report has its own stored procedure to return the data needed for that sub report.
I have created a ssrs report using ssrs-2012 that contains 2 tables 2 pie charts and 1 line chart. But I am unable to see 2 pie charts and and 1 line chart after deploying the rdl in sharepoint server.
Why I am not able to see those charts, or sharepoint server will not support charts at all.
I am having a main report having two subreports, say M1,S1 and S2 respectively.
The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,
Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()
Using MS SQL 200 SP4 with Reporting Services 2000 SP2 on Win 2003 Server SP1
Visual Studio .NET 2003 on different PC (Win XP SP2)
No problem creating reports or building solutions. Problems develop when deploying report to Report Server.
Here is the Output:
------ Build started: Project: From CD, Configuration: Debug ------
Build complete -- 0 errors, 0 warnings
------ Deploy started: Project: From CD, Configuration: Debug ------
Deploying to http://<server name>/ReportServer?%2f2nd Deploying data source '/2nd/AdventureWorks2000'. Deploying report 'Vendor Purchase Orders'. The report definition is not valid. Details: Could not find schema information for the element 'http://schemas.microsoft.com/sqlserver/reporting/2003/10/reportdefinition:Report'. Deploy complete -- 1 errors, 0 warnings
These are my first attempts using report services. In a previous deployment attempts it created the folder (named 2nd), but in another attempt (saving it to the existing folder) I got the same result as you see above (I have also tried with a new folder but no luck). This above output is from my last attempt.
The Build error Task List states:
The Report Definition is not valid. Details: Could not find schema information for the element 'http://schemas.microsoft.com/sqlserver/reporting/2003/10/reportdefinition:report'.
The shema URL as above returns HTTP 404. If I remove :report, I receive the page for Report Definition Language Schema May 2004
Looking at the .rdl code the schema URL is as above without :report.
As you can imagine with a limited skill set in this area I am quite confused. I have been doing alot of research but found nothing to help (or that I understand will help) so far.
If anyone can help me get through this I would appreciate it.
I have 4 subreports that I need to display in the main report. I can pull a sub-report with in the main report howevere the subreport doesn't display any data. It just gives me a blank template like:
Customer name Customer # Address 1 Address2 city
The subreport itself is not empty when I open it otherwise it shows me a list of all the customers however, no data when I call it as a part of main report.
1. have report called report_a.rdl with subscriptions attached to it 2. developed a new report called report_b.rdl with the same parameter list as report_a.rdl 3. i would like to replace report_a.rdl with report_b.rdl without losing the subscriptions.
I think this is the workflow:
1. rename report_a.rdl to report_a_old.rdl in BIDS 2. rename report_b.rdl to report_a.rdl in BIDs 3. deploy report_a.rdl to reporting server
Will that work even though the ReportID GUID will change?
What we've found is that when you have two reports where one navigates to the other, if you click on the second page of the second report, it takes you to the second page of the original report. If you navigate over to the subreport again and click for the second page, it works appropriately. This is definitely a no-go for production code and this may delay our ship date because I would think this is definitely undesirable.
Conditions:
ASP.NET Report Viewer using Remote Reports Report that links to another report Both reports return more than one page Reporting Services installed Steps to Reproduce:
Download the source code here.
Follow the directions (near the bottom of the post) to get the project set up.
Run it and click on a link in the first report to go to the second report.
Click the arrow for page 2 of the second report.
Notice how it takes you back to page 2 of the first report (this doesn't happen when you are in preview mode in the Reporting Services project and I don't believe it does this in a smart client application).
Click on a link in the first report to go back to the second report.
Click the arrow for page 2.
Notice how it takes you to page 2 of the second report.
Here is a link with source code and a more detailed explanation: http://geekswithblogs.net/robz/archive/2007/11/21/Reporting-Services-2005-BUG-Report-Linking-and-Paging---ASP.NET.aspx
So what I am looking for is both a workaround for now and if this is determined to be a bug, to be fixed in the next service pack.
I was wondering if anyone knew how to take a value from a subreport and compare it to a value iwthin the main report. We are trying to see if the value in the subreport is greater than the value returned in the main report. We want to make the value test red if it is greater than. I know how to compare these values if they were in the same report, but when it comes to subreports I am lost. Any ideas? Thanks in advance.
I have 2 reports where 1 is a subreport and the other one is a main report. Can i change or refer to a control(item) in the main report depending on the value of an item in the subreport, when the subreport is being run?
Is there anyway that i can access subreport field in main report? I just want it to be displayed. Thats it. I can not put subreport field in main report bcz it is based on the parameter passed by main report.
Here's my problem. I have a subreport that shows data and labels if data is returned. However, if no data is returned, the subreport doesn't show at all. I have a message on the subreport I would like to show if no data is returned, but the subreport won't show at all. Any ideas??
SUBREPORT (License info to the right) SHOULD PRINT TO RIGHT OF ADDRESS INFORMATION ON LEFT. LIKE THIS...
Name ABC-12345 Address line 1 DEF-12345 Address line 2 GH1-12345 City, State Zipcode
The data is from one table and looks like this. Both the main report and subreport use a shared data souce.
Name Address line 1 City State Zipcode License ------------- ------------------- ------------- --------- ---------- --------- Joe Schmoe 123 Maple Street Clearwater Florida 33777 ABC-12345 Joe Schmoe 123 Maple Street Clearwater Florida 33777 DEF-12345 Joe Schmoe 123 Maple Street Clearwater Florida 33777 GHI-12345
All lines are header lines. Subreport has been placed in top header line. IT IS PRINTING SIMILAR TO THIS BUT SHOULD PRINT AS FIRST STATED ABOVE...
Name ABC-12345 DEF-12345 GH1-12345 Address line 1 Address line 2 City, State Zipcode
ISSUE: I would like the subreport to PRINT ALONG WITH the address information to its left. In Crystal Report a subreport could "Underlay Following Sections" - a wonderful feature Microsoft maybe should have copied. Is there a way to duplicate "underlay" behavior in SQL Reporting ? Thanks.
UPDATE: Coworker found workaround. Can concatenate Name, Adress line 1, Address line 2, City, State and Zipcode into one field. Would still like to know a more straightforward way.
This is the part that I need help. I need to use an original value from the main report and a "return" value from the subreport. Main Report (Footer) Sum(FinalPayment) + SubReport.Sum(PaymentAdances)
Is it possible to pass a return value back to the main report from a subreport?
I need to convert a Crystal report that contains three subreports. Each of these subreports uses a different stored procedure to obtain data. The main report uses data from these subreports to calculate averages in the footer etc.
How do i get the data contained in these subreports so i can use it in my main report?? Thanks in advance
