Hi, I have some SSIS Deployment Manifest Files that needs to be copied over into another server. I am just using the Package installation wizard to do this. But it is taking to long to run.( I have 19 simple packages and it is taking 15 minutes).
Is there any way that I can use to achieve better performance in this?
When I create a deployment utility I...
- set AllowConfigurationChanges to True.
- set CreateDeploymentUtility to True
- DeploymentOutputPath is set to binDeployment
- I click 'Build' and it creates the binDeployment directory and writes all my DTSX files and my dtsConfig file
But it doesn't create a manifest file. Why not?
Thanks
Hi, I want to run "Intergration Services Deployment Manifest" through the command prompt, passing the values .. which should basically go and install that Package either on File System or SQL Server. Does any one have any idea on how to do that ...
Thanks,
Trying to build a deployment package. I have a number of dtsx in a project that share a connection config file. When I build, the error states: 'Could not copy file "whatever.dtsconfig" to the deployment utility output directory. ... The file already exists'
What am I doing wrong?
i'm using DTS to copy one database into a new database, copying over everything, i.e. stored procedures, views, etc.. not just the tables.. how long should it take? it's been stuck at 22% now for about 15 minutes?
thanks
My company is considering purchasing MS SQL Server to run anapplication on (SASIxp). I am mainly familiar with Oracle, so I waswondering how long it would take to copy a database. Basically we havedatabase A and each night we want to replace database B with thecontents of A. How long would this take say if we had a 10GB databaseor a 20GB database.What would be the technique to do this nightly, the Copy DatabaseWizard, Snapshot Replication, Attach & Detach...? We need to automatethis process, and the source database can be made unavailable whenthis happens.Thanks,Roger
View 2 Replies View RelatedHi!
I'm using VS 2005 SP 1 on my first project with CE. I've recently run into the problem that if I do anything with my SDF file in Visual Studio I get the following error when I run the project (in debug mode from VS):
The process cannot access the file 'C:xxxMySDF.sdf' because it is being used by another process.
The solution is to close the project and reopen it however this is getting painful. Anyone else seen this problem?
Thanks!
Is there a bootstrapper manifest file available for CE 3.5 Beta 2? We need to make a preliminary installation package with our VS 2005 application.
Dave Michel
Hi all..
My server is 64 bits and sql server 32. When i run the SSIS package in SSIS itīs works correctly, but when i make the .manifest to install the package in my server i got the error :
===================================
Unexpected error occurred. (Package Installation Wizard)
===================================
Retrieving the COM class factory for component with CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E} failed due to the following error: 80040154. (Microsoft.SqlServer.ManagedDTS)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application..ctor()
at Microsoft.SqlServer.Dts.Deployment.PackageInstallationWizardForm..ctor()
at Microsoft.SqlServer.Dts.Deployment.PackageInstaller.Main(String[] args)
===================================
Retrieving the COM class factory for component with CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E} failed due to the following error: 80040154. (Microsoft.SqlServer.ManagedDTS)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application..ctor()
Thankīs...
What is the use of creating manifest file in SSIS... because I was schedule a job and its not needed and manifest file then why we are creating this.
View 4 Replies View RelatedAn inherited SSIS (2012) solution displays the following messages when I try opening it in VS 2012:
"One or more projects in the solution were not loaded correctly."
Then another message displays
"The encrypted data in the project manifest failed to load. The project manifest is corrupted or the project was encrypted by another user."
Hi,
Please can you let me know which of the following 2 is a better method to deploy SSIS packages
File System deplyment OR SQL Server deployment
What are the advantages of one over the other?
Thanks,
Mrinali
Hi,
I set up DB mirror between a primary (SQL1) and a mirror (SQL2); no witness. I have a problem when I issue command:
alter database DBmirrorTest
Set Partner = N'TCP://SQL2.mycom.com:5022';
go
The error message is:
The remote copy of database "DBmirrorTest" has not been rolled forward to a point in time that is encompassed in the local copy of the database log.
I have the steps below prior to the command. (Note that both servers' service accounts use the same domain account. The domain account I login to do db mirror setup is a member of the local admin group.)
1. backup database DBmirrorTest on SQL1
2. backup database log
3. copy db and log backup files to SQL2
4. restore db with norecovery
5. restore log with norecovery
6. create endpoints on both SQL1 and SQL2
CREATE ENDPOINT [Mirroring]
STATE=STARTED
AS TCP (LISTENER_PORT = 5022, LISTENER_IP = ALL)
FOR DATA_MIRRORING (ROLE = PARTNER)
7. enable mirror on mirror server SQL2
:connect SQL2
alter database DBmirrorTest
Set Partner = N'TCP://SQL1.mycom.com:5022';
go
8. Enable mirror on primary server SQL1
:connect SQL1
alter database DBmirrorTest
Set Partner = N'TCP://SQL2.mycom.com:5022';
go
This is where I got the error.
The remote copy of database "DBmirrorTest" has not been rolled forward to a point in time that is encompassed in the local copy
Thanks for any help,
KT
Hi!
I did:
alter database mydb set single_user with rollback immediate;
exec sp_detach_db @dbname='mydb', @keepfulltextindexfile='true';
then I tried to copy files to new location on other drives, same server but got
>>Cannot copy <myfile>: Access is denied
Make sure the disk is not full or write-protected and that the file is not currently in use<<
I also tried rename of file without success.
I also tried with db service stoppet (not preferred) without success.
How to find out, which process locks the files?
Best regards
How do I transfer/copy the stored procedures in my Test DB to my LIVE DB? IT won't allow me to export keeps giving me an error.
View 4 Replies View RelatedHello,
if i have a given database (a model) and i want to copy this database in the same database instance. Is it ok to copy the mdf and ldf file and attach the files with a new database name in the same instance.
Or is the datebase name part of the .mdf file?
Regards
Markus
I am attempting to use the copy wizard to copy databases from SQL Server 2005 to SQL Server 2008 R2 w/ FP1.
The copy fails with a login failure to SQL Server 2005. I have a user id & password under Windows for both servers. I have a user id and password under SQL security with the called for admin security rights.
The 2005 server has two instances, 20 databases, two dozen maintenance plans, and over a hundred users. I really would like to use the utility so I don't have to recreate everything manually.
Hi~,
Before implementing memory based bulk copy insert with IRowsetFastLoad interface of SQL Server 2005 OLE DB provider, I want to know some considerations.
- performance : compared with T-SQL's "BULK INSERT ..." and bcp utility
- SQL Server's resource usage : when running memory based bulk copy, server resource's influence
- server side action(behavior) : when server is busy, delayed-update means IRowsetFastLoad::Commit(true) method can insert right after?
- row-count : The rowcount limitation can be inserted by IRowsetFastLoad::InsertRow() method before IRowsetFastLoad::Commit
- any other guide lines
I'm trying to test my ASP.NET application. Everything is working to the point of getting to my login page to open. When I try to login I receive and error that the database does not exist or access is denied. I used the developer version of SQL Server to create the database and installed the MSDE on my test PC. Then I copied the mdf and ldf files to the new PC. Is there something else I should be doing? Or any suggestions?
Thank you,
I created a sql database on my development machine for my .net app. There are whole brunch of tables and stored procedures. Now I'm at the point to test my app on integration environment, instead of recreating each table and stored procedure, is there an efficient way to promote them. (note I use both MSDE version on both machine)
View 6 Replies View RelatedHi all,I am doing a project that involved with the big volume of data to beuploaded to the SQL server. Due to the limitation at my employer'ssite, I couldn't have the bulk admin right. I am looking at thecommand BCP and wonder if there is any copyright issues if I were touse BCP and to deploy the command?Thanx.
View 1 Replies View Related
Hello,
View 7 Replies View RelatedHi everybody,
I want install the project in client side .. In installation time i want to access the my server .. How i can make the setup file to access the internet.. please help me.....
Thanks & Regards,
S.Sajan
I tried to deploy a package to production and failed miserably. The error is pretty simple "Format of the initialization string does not conform to specification". Trouble is, I opened my source on the production machine, generated a new connection string from a new connection manager and guess what, the string comes out EXACTLY the same as the one my package is set to point to at runtime. so, where do I start?
some general stuff.
There are ADO and OLEDB connection in the package.
Each gets its connection string from a variable.
the variable is set in a script task which pulls the data out of an encryped sql server column.
when the connection string is displayed via a simple message box, it is exactly what I want i to be, e.g.
Data Source=a.b.c.d;User ID=A_USER;password=password;Initial Catalog=a_database;Provider=SQLNCLI.1;Auto Translate=False;
I am guessing that it must be a setting or option on the SQL Servers themselfs, something in its configuration as otherwise the strings are identical so there must be something in the way that one SQl server is not set up to allow connections from another?
I'm working through Ch 3 of "SQL Server 2005 Reporting Services Step by Step" by Stacia Misner, published by Microsoft Press, but I can't get the example report in Ch3 to deploy. I get a long error message, which says this:
TITLE: Microsoft Report Designer
------------------------------
A connection could not be made to the report server http://localhost/ReportServer.
------------------------------
ADDITIONAL INFORMATION:
Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
--
<html>
<head>
<title>
SQL Server Reporting Services
</title><meta name="Generator" content="Microsoft SQL Server Reporting Services 9.00.2047.00" />
<meta name="HTTP Status" content="500" />
<meta name="ProductLocaleID" content="9" />
<meta name="CountryLocaleID" content="1033" />
<meta name="StackTrace" content=" at Microsoft.ReportingServices.Diagnostics.RSConfiguration.Load()
at Microsoft.ReportingServices.Diagnostics.RSConfiguration.Construct(String configFileName)
at Microsoft.ReportingServices.Diagnostics.RSConfiguration..ctor(String configFileName, String location)
at Microsoft.ReportingServices.Diagnostics.RSConfigurationManager..ctor(String configFileName, String configLocation)
at Microsoft.ReportingServices.Library.Global.get_ConfigurationManager()
at Microsoft.ReportingServices.WebServer.Global.StartApp()
at Microsoft.ReportingServices.WebServer.Global.Application_BeginRequest(Object sender, EventArgs e)" />
<style>
BODY {FONT-FAMILY:Verdana; FONT-WEIGHT:normal; FONT-SIZE: 8pt; COLOR:black}
H1 {FONT-FAMILY:Verdana; FONT-WEIGHT:700; FONT-SIZE:15pt}
LI {FONT-FAMILY:Verdana; FONT-WEIGHT:normal; FONT-SIZE:8pt; DISPLAY:inline}
.ProductInfo {FONT-FAMILY:Verdana; FONT-WEIGHT:bold; FONT-SIZE: 8pt; COLOR:gray}
A:link {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLOR:#3366CC; TEXT-DECORATION:none}
A:hover {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLOR:#FF3300; TEXT-DECORATION:underline}
A:visited {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLOR:#3366CC; TEXT-DECORATION:none}
A:visited:hover {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; color:#FF3300; TEXT-DECORATION:underline}
</style>
</head><body bgcolor="white">
<h1>
Reporting Services Error<hr width="100%" size="1" color="silver" />
</h1><ul>
<li>The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError) </li><ul>
<li>Access to the path 'C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServerRSReportServer.config' is denied.</li>
</ul>
</ul><hr width="100%" size="1" color="silver" /><span class="ProductInfo">SQL Server Reporting Services</span>
</body>
</html>
--. (Microsoft.ReportingServices.Designer)
------------------------------
BUTTONS:
OK
------------------------------
I'm attempting to deploy CLR Stored Procedures from Visual Studio 2005.
I have a VS Database project with stored procedures for all of the tables in our database. (I would really like to keep everything together in 1 DLL), everything seems fine except...
I keep receiving the following error when attempting to deploy to SQL Server:
Error 1 Timeout expired. The timeout period elapsed prior to completion of
the operation or the server is not responding.
After some experimentation I have determined that its because the DLL is too
large: 1.8 mb. (I also have a larger one).
I have looked through various documentation sources but have found none
concerning this problem other than specifing something aboug a 100ms
execution timeout (not sure if this is the same).
Deployment works if I trim down the size of the DLL (i.e., remove procedures from the solution)
Is there anyway to deploy large DLLs to SQL Server without having to break
them up? If so, where is the setting to allow a longer timeout period for
deployment?
Hi~, I have 3 questions about memory based bulk copy.
1. What is the limitation count of IRowsetFastLoad::InsertRow() method before IRowsetFastLoad::Commit(true)?
For example, how much insert row at below sample?(the max value of nCount)
for(i=0 ; i<nCount ; i++)
{
pIFastLoad->InsertRow(hAccessor, (void*)(&BulkData));
}
2. In above code sample, isn't there method of inserting prepared array at once directly(BulkData array, not for loop)
3. In OLE DB memory based bulk copy, what is the equivalent of below's T-SQL bulk copy option ?
BULK INSERT database_name.schema_name.table_name FROM 'data_file' WITH (ROWS_PER_BATCH = rows_per_batch, TABLOCK);
-------------------------------------------------------
My solution is like this. Is it correct?
// CoCreateInstance(...);
// Data source
// Create session
m_TableID.uName.pwszName = m_wszTableName;
m_TableID.eKind = DBKIND_NAME;
DBPROP rgProps[1];
DBPROPSET PropSet[1];
rgProps[0].dwOptions = DBPROPOPTIONS_REQUIRED;
rgProps[0].colid = DB_NULLID;
rgProps[0].vValue.vt = VT_BSTR;
rgProps[0].dwPropertyID = SSPROP_FASTLOADOPTIONS;
rgProps[0].vValue.bstrVal = L"ROWS_PER_BATCH = 10000,TABLOCK";
PropSet[0].rgProperties = rgProps;
PropSet[0].cProperties = 1;
PropSet[0].guidPropertySet = DBPROPSET_SQLSERVERROWSET;
if(m_pIOpenRowset)
{
if(FAILED(m_pIOpenRowset->OpenRowset(NULL,&m_TableID,NULL,IID_IRowsetFastLoad,1,PropSet,(LPUNKNOWN*)&m_pIRowsetFastLoad)))
{
return FALSE;
}
}
else
{
return FALSE;
}
Have my first .NET app deployed to remote host and configured successfully, except for one thing: can't figure out how to export my SSE tables to the SQL server database on the remote server. I tried SQL Server Management Studio Express ... with that, I can access the remote database, but can't access the local database file I produced with VSWDE. What is the appropriate tool to use to export tables from a local SSE database file to a remote SQL Server 2005?
View 3 Replies View Relatedhi
I am trying to add membership to my site. i use visual web developer and the set controls. i.e. login etc. I also used the asp web config tool which is where my test users are. Everything works locally. but when i upload it and try to log on I get this error message:
Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735043
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42
System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83
System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160
System.Web.UI.WebControls.Login.AttemptLogin() +105
System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Can anyone out ther please help me with this.
thanksNick
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
Scenario:
I have a dev machine with VS2005Pro, WinXPSP2. I create a web site with
authentication built with the ASP.Net Configuration Tool in VS2005.
The site, login and all other functionality are fine when tested on the dev
machine.
I use copy web site to 'deploy' the site to a W2003R2 server. The
authentication process doesn't recognize the password. All other web
functionality is fine. With SSMSE I can see that the request is actually
being processed by SS2005E.
Is this likely to be an encryption problem due to differing machine keys or
something similar? What is the recommended approach to moving ASPNETDB from
the dev machine to a server?
Hi. I created an app on my laptop and wish to deploy it to a server. I followed the steps to release the project and I copied the files over to the server. I'm getting an access denied or server does not exist error message. I went into the code behind pages to change the connection string but it still doesn't work. I think it has something to do with the SQL Server name. It's just local. The person that installed it did not change the name. In enterprise manager, it looks like this. (local) (Windows NT) Should the connection string be SERVER/(local) ? Is there a default name I'm not aware of? Any help would be greatly appreciated. Thanks!
Here is the error message:
Server Error in '/' Application.
--------------------------------------------------------------------------------
SQL Server does not exist or access denied.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: SQL Server does not exist or access denied.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException: SQL Server does not exist or access denied.]
System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) +474
System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) +372
System.Data.SqlClient.SqlConnection.Open() +384
System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState) +44
System.Data.Common.DbDataAdapter.FillFromCommand(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +304
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +77
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +36
ICCSalesTracker.WebForm1.GetRGU() +433
ICCSalesTracker.WebForm1.Page_Load(Object sender, EventArgs e) +7
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +750
hi everyone. i've recently upgraded to ASP.NET 2.0 and have successfully created a web application using the 2.0 membership provider. everything is working GREAT...
...until it's time to deploy! for the past 2 days i have been stuck trying to figure out why my app cannot connect to my SQL Server 2005 database. i am plagued by the:
"login failed for user 'NT AUTHORITY/NETWORK SERVICE'" error.
the database is aspnetdb.mdf located in the app_data folder of my web application.
the "LocalSqlServer" connection string name is used for connecting to the database (using the "attach" menthod
steps taken so far:
installed vs2005 on the target server, opened the project, connected to the database and added the "NT AUTHORITY/NETWORK SERVICE" user as a db owner to the aspnetdb.mdf database
installed SQL Server 2005 Management Studio Express to try to accomplish the same thing as through vs2005
gave the NT AUTHORITY/NETWORK SERVICE account full access to the folder where the web application resides.
attempted to create a custom connection string to attach the database and connect using an SQL user instead of a windows user, but "attaching" an MDF file seems to only work with integrated security.
attempted to attach the database using the Management Studio Express and added a SQL user as the db owner. but SQL can't find the database even when it's attached.
i've deleted, rebooted, uninstalled, reinstalled, recopied, etc. several times with no luck.
one thing that i find very peculiar: on the target server, when i open the WSAT through vs2005 it shows 0 users, even though there ARE some in the database when i run the app on in development environment. in this situation, i try to log in to the application and the login page returns a "user not found" error. after returning to the WSAT and creating a new user, i try to log in again and get login failed for NT AUTHORITY/NETWORK SERVICE again.
can someone PLEASE help me. it just doesn't seem like it should be this difficult. the new membership provider in 2.0 is really easy to use...how could it be so difficult to deploy??
PLEASE PLEASE PLEASE help. thanks in advance!