I am able to work fine in my development environment, however when I deploy the application to a clean machine, I get the dreaded "Unable to find the requested .Net Framework Data Provider" error.
I have included the eight dlls required by the Sql Server 2005 CE engine (per the documentation) in the deployment project.
Any help would be greatly appreciated.
Hi Everyone,
I've just finish re-installing VS.NET 2005 and tried the Walkthrough: Displaying Data in a Web Forms Page
I followed exactly as it is that is I tested the connection "Connection Sucessful", test Query "Successfull" but when i run it prompt me with the following error message:
-------------------------------------------------------------------------------------------------
Failed to find or load the registered .Net Framework Data Provider.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Configuration.ConfigurationErrorsException: Failed to find or load the registered .Net Framework Data Provider.
Source Error:
[No relevant source lines]
Source File: c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesw9f240aab3a2217cc8App_Web_cztxhfge.0.cs Line: 0
Stack Trace:
[ConfigurationErrorsException: Failed to find or load the registered .Net Framework Data Provider.]
System.Data.Common.DbProviderFactories.GetFactory(DataRow providerRow) +1374119
System.Data.Common.DbProviderFactories.GetFactory(String providerInvariantName) +109
System.Web.UI.WebControls.SqlDataSource.GetDbProviderFactory() +63
System.Web.UI.WebControls.SqlDataSource.GetDbProviderFactorySecure() +19
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +120
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +41
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +6931
System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +213
System.Web.UI.Page.ProcessRequest() +86
System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) +18
System.Web.UI.Page.ProcessRequest(HttpContext context) +49
ASP.default_aspx.ProcessRequest(HttpContext context) in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesw9f240aab3a2217cc8App_Web_cztxhfge.0.cs:0
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +303
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
------------------------------------------------
please help and point out what is the issue?
Thanks in advance for your help.
Hello
I have recently downloaded Orcas beta VS product and had no previous version of VS before. The install went clean and I have been able to generate Window apps and web apps with very little issues; however, I have one issue with running a web app using the "view in browser" option for checking an aspx page for validity. If I use the default Northwind database provided and generate an aspx form using the "DataSet" toolbox widget, the tool prompts for the datasource etc. required to generate the required code. I can select the Northwind database and select the desired columns from one of the tables. Once completed, I build the project (clean build) and then select the "view in browser" option to verify the results. The result is an error page indicating a server error ->
Failed to find or load the registered .Net Framework Data Provider.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Configuration.ConfigurationErrorsException: Failed to find or load the registered .Net Framework Data Provider.
I created on odbc connection to an iSeries(as400) box and was successfull in displaying the table on the webpage! I looked into the web.config file and it appears that all the required XML data is present. Any help would be appreciated as I am fairly green when it comes the .NET world.
Thanks
Hi,
View 3 Replies View RelatedVS2k5 Win2k3IIS6.NET 2.0In my ASP.NET 2.0 app I create and open an SQL connection in the page's constructor and call Dispose() in the destructor. The SQLConnection object is a class member of the page. This page makes heavy use of the SQLConnection object so I felt opening and closing in the constructor/destructor respectively was good design. I know this doesn't take full advantage of connection pooling. Any design input would be very much appreciated.Here's the destructor code:/// Destructor~Officer(){ if( m_objConn != null ) m_objConn.Dispose(); // <-- Exception occurrs here.}/// End DestructorWhen running this particular page through some testing I get the following exception in the destructor at the "m_objConn.Dispose();" line:System.InvalidOperationException was unhandled Message="Internal .Net Framework Data Provider error 1." Source="System.Data" StackTrace: at System.Data.ProviderBase.DbConnectionInternal.PrePush(Object expectedOwner) at System.Data.ProviderBase.DbConnectionPool.PutObject(DbConnectionInternal obj, Object owningObject) at System.Data.ProviderBase.DbConnectionInternal.CloseConnection(DbConnection owningObject, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Close() at System.Data.SqlClient.SqlConnection.Dispose(Boolean disposing) at System.ComponentModel.Component.Dispose() at Officer.Finalize() in c:sysprojectsAddOfficer.aspx.cs:line 461) Is this design good/bad?1) Is this a bug?2) Do I need a try/catch in a destructor? Is it good programming practice?3) Why is this happening?4) What is the meaning of life?Any help is appreciated. TIA
View 2 Replies View RelatedI am pulling data out of SAP ECC 6 to MS SQL server 2005 from Task - Import data .Net Framework Data Provider for mySAP Business Suite
The data which I am getting out of SAP gets multiplied by 1000 i.e. Table CE1LSC0 has field VVQTY which is Quantity€¦
The value of quantity in SAP is 8.0 when I pull in by the aforesaid tool it come as 8000.00.
Do anyone has any idea what is going wrong, I even ask the basis guys to reinstall the Function module required for .Net Framework Data Provider for mySAP Business Suite in SAP.
I uninstalled .Net Framework Data Provider for mySAP Business Suite tool and reinstalled it but still I am encountering the same problem.
I want to migrate DB from sybase to SQL server 2012 and i am using SSMA for it. Till yesterday it was working fine. Today when i try connecting sybase i am getting below error.
Unable to find specified provider.Error occurred while establishing connection to Sybase server. If you have 64-bit connectivity components installed on the machine, you can run 64-bit version of SSMA application whose shortcut can be found under the Programs menu. Or you can install the 32-bit connectivity libraries form Sybase product media or download it from Sybase web site.
When I'm trying to deploy a SQLCLR assembly , I get the following error:
View 7 Replies View RelatedI keep getting this error message
[02/03/08,10:50:08] Microsoft .NET Framework 2.0a: [2] Error: Installation failed for component Microsoft .NET Framework 2.0a. MSI returned error code 1603
[02/03/08,11:02:54] Microsoft .NET Framework 2.0a: [2] Error: Installation failed for component Microsoft .NET Framework 2.0a. MSI returned error code 1603
[02/03/08,11:03:19] WapUI: [2] DepCheck indicates Microsoft .NET Framework 2.0a is not installed.
I could not find the .NET Framework 2.0a that it says I need..Need Help!!
Thank You..
Martin
If you connect to a server and open a query in SQL Managment studio (2005) and looses connection and then regain the connection, when you try to run the query it gives me a "TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host." This happens against both 2005 and 2000 servers. If I re-run the query it works. However, this happens in our VB.NET app as well for clients with Wireless connections. So, something has changed in Framework 2.0 regarding this, does anyone know how to tell the client to not throw this error and just try connecting the server instead which will work?
View 105 Replies View RelatedHi
We are checking VB 9 (Orcas).
we connected to database created under with sql server 7. with this code
Public cn As New ADODB.Connection
Public Sub OpenDB()
cn.Open("Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;Initial catalog=Reservation;Data Source=.")
End Sub
this code worked well.
we know sql7 is not compatiable with vista. please tell us how to connect it wiith sql2005 . we downloaded orcas express edition beta. we created a database also. please let u know how to connect with Microsoft SQL Server Compact 3.5 (.NET Framework Data Provider for Microsoft SQL Server Compact 3.5).
Rgds
Pramod
Is it possible to design a package with one connection manager who's name remains static, but the actual provider changes at deployment time?
For example, I have two connection managers, source and target. Each of these, depending on the environment, may use any combination of native SQL Server, or Oracle.
When I create a connection manager, the provider is specified at design time. Is it possible, using the confguration files, to allow the administrator to determine the provider at deployment time, such that the Control Flow and Data Flow tasks can use the connection mangers without knowing the provider, or more importantly, only one version of the package need be maintained?
Thanks,
Rick
Hello, I've a problem with a software developed in C# with the framework 2.0. This is the error I receive : The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" was unable to begin a distributed transaction. OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" returned message "No transaction is active.". If I try directly to restart the process, it works fine. Is there someone who can help me ? This is the process 1. In C# --> Call of a Query : select from the linked server (db in sql 2005) and insert into a table SQL 2005 2. In the C# --> using (TransactionScope scope = new TransactionScope()) and insert in a table in SQL 2005 which is link server Thank in advance.
View 1 Replies View Related
Hi,
After reading this helpful blog entry:
http://blogs.msdn.com/sql_protocols/archive/2007/05/13/sql-network-interfaces-error-26-error-locating-server-instance-specified.aspx
I think this might be a good place to ask the following question.
I am writing the error handling code for my data access layer for a web application. I am using the Enterprise Library Data Access Application Block. Although this supports generic database connections, I realized that I need to handle errors specific to each database type. Microsoft SQL is the only database type I am using for now, so I am using a try...catch (SqlException e).
In testing my code, I intentionally changed the instance name in web.config to a name that does not exist. I get the very popular error 26 - Error Locating Server/Instance Specified. This is returned as a SqlException, but the SqlError.Number property is set to -1.
Am I getting "-1" because the provider hasn't actually connected to SQL yet, so it doesn't have an actual SQL error number?
Can I assume that (SqlError.Number == -1) is always a fatal, provider-level connection exception?
Will the provider ever use another SqlError.Number of its own? Or do all numbers besides -1 come from the SQL sysmessages table?.
Is there a comprehensive list of what exceptions might be raised by the SqlClient provider, including #26?
The reason for all the questions is that in a web application, I want to prevent the end-user from seeing the "real" exception if it has to do with configuration errors. However, maybe there are other errors that the user should see and handle? It's hard to know without a full list of SqlClient provider errors, along with the SqlError.Number that each error maps to.
Thanks and regards,
Mark
I have two SQL 2014 Enterprise Edition installed with the SSRS (native) role installed.
Both server are configured separately with their own Report Server database. Now I want to configured a scale out deployment with a shared database.
On Server 1, I created a new Report Server database. On the second server, I change the database and joined the existing database. The problem is that the second server never shows up under Scale-Out deployment (Waiting to Join).
Hi All,
I have created a solution which contains only 2 packages say Package1.dtsx and Pakage2.dtsx. I want to create a deployment utility to deploy onto other developers machince. I changed the project properties "CreateDeploymentUtility" to TRUE. When I do the build it is not creating the files in "Deployment" folder. It is saying Rebuild All Failed but the error is not showing.
For more information the 2 packages have 4 indirect configurations from environment variables which are storing the actual config file path.
Am I missing something here?
Thanks.
Venkat.
Hello All,
I'm using SQL Sever 2005 express and accessing it with asp.
Here is my script of connecting database:
strServerName=".\sqlexpress"
strUid="test"
strPwd="test@123"
strDatabaseName="test"
Set Conn = Server.CreateObject("ADODB.Connection")
Conn.CursorLocation = 3
Conn.ConnectionString = "driver={sql native client};server=" & strServerName & ";uid=" & strUid & ";pwd=" & strPwd & ";database=" & strDatabaseName & ";Encrypt=NO"
Conn.ConnectionTimeout = 30
Conn.Open
However, everytime I connect I get the following error in my IE:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][SQL Native Client]Client unable to establish connection due to prelogin failure
/inc/OpenCnn.asp, line 15 (whch is Conn.open)
When I check the SQL server express log file, I find this one:
2006-07-16 20:20:07.53 Logon The server was unable to load the SSL provider library needed to log in; the connection has been closed. SSL is used to encrypt either the login sequence or all communications, depending on how the administrator has configured the server. See Books Online for information on this error message: 0x6d. [CLIENT: <local machine>]
My sql native client configuration is: Force Protocol Encryption: No, Trust Server Certificate: yes.
What's possibly wrong with my script or sql server configuration?
Thanks in advance
Hi,
I am using VS2005 and Sql Server 2000 (personal edition). I am able to connect with SqlClient Provider on Local Machine (when db server and VS2005 on same machine). But I try to connect SqlServer on different machine it is not allowing me to connect. If I use SqlOledb Provider it got connected.
Please tell me how could I connect with DB server (Sql Server 2000) from remote machine.
Dear all,
I have been attempting to set up a linked server in SQL Server 2000 to point to an Oracle database (a very old Oracle database, v7!).
The linked server set up works fine. Then I created a database on the same SQL Server. Within that database I created a view which reads information from a view in the Oracle database (linked server). When I attempted to create this view in Enterprise Manager, I get the following error:
"The operation could not be performed because the OLE DB provider 'MSDAORA' was unable to begin a distributed transaction."
And so I created the view in Query Analyzer. This worked perfectly, no errors, and I can now go into Enterprise Manager and call up the view, which happily goes off to the view in the Oracle linked server and pulls back the info. BUT, when I attempt to do the same thing through an application on a different machine (using OLE Db, and a UDL to connect) the same error as above appears.
Does anyone know what this error means, and where I went wrong? Any help greatly appreciated. My view onto the linked server looks like this:
"CREATE VIEW dbo.NLPG_VIEW
AS
SELECT * from openquery(sadaslink, 'select * from NLPG_VIEW')"
Many thanks in advance for your wisdom!
P.S I wondered whether I need to check if the distributed transaction co-ordinator is running but don't know how.
Thanks,
Hi All,
I am getting following Error:
Oracle linked server in SQL server 2005 to update tables in Oracle database.
I have used OPENQuery to update tables in Oracle from a SQL Server 2005 Stored procedure.
If we run query from sql management studio for inserting or updating table of linked server then it runs fine. But if we use Begin distributed transaction then its gives error -
Server: Msg 7391, Level 16, State 1, Procedure sp_test, Line 105
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
We are using Sql server stored procedure to run the open query syntax for updating oracle interface table.
Hi All,
I am in process of transfering data from Sybase to Sql Server using SSIS 2005
have taken a Data Flow Task in Control Flow tab
In Data flow tab, I have taken one Ole DB Source and One OLe DB Destination
For the source, I am using Sybase Adaptive Server Anywhere Provider 8.0
For Destination, I am using Sql Server 2005 database
In Ole Db Source Editor ,
For OLe Db Connection Manager, I choose Sybase Connection
For Data access mode, I choose Table or View
For Name of the table or the view, I choose a table by name Table1( it lists all the tables from Sybase database)
When i click on preview button or Columns link, I get the following Error
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E21.
Error at Data Flow Task [OLE DB Source [1]]: Unable to retrieve column information from the data source. Make sure your target table in the database is available.
------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC020204A (Microsoft.SqlServer.DTSPipelineWrap)
Please help me out.
Thanks in Advance
Srinivas
The problem that I am having is that with Visual Web Developer I am creating a webpage and having it directly put online, so for example when I start a new ASP.NET page, I select the location to be HTTP, with the location http://MYWEBSERVER/Website and for the language and Visual BasicI notice a couple of things, first that there is no longer a a link under the Main toolbar "Website" selection called the ASP.NET configuration. So how can I configure what I want to have users be able to do? It seems that this choice is only available if I am building the ASP.NET page on my "localhost". So that is the first problem. So I am able to get the pages to work, atleast the things such as the textboxes to show up etc, (Even things as advanced as the "Login" box). How ever when I try to get someone to try to login I am taken to a page that has an server error. The error is:
"The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file. "
The Stack Trace Errors are at the bottom. I think this is happening because the automatically generated databases are not getting built online as they are on my computer. On my computer I have MSSQL express. So either the databases are not getting built for some reason, (and I think that is the case as I don't see any in the folder). So I think that somehow I have to create a database on my server, and then somehow configure the ASP.NET file, perhaps in the Web.Config file to look for that new database. Is this the correct methodology? Is there some simpler way that I can just somehow upload things as they are and have them work correctly on my server? The error says that either the Server did not find the database or that the trust level was insufficient. I don't think that is it as I just looked again and I don't see any .MDF files. So how would I go about getting this to work right? Is there a way to do this with MySQL also? So that I don't have to use MSSQL? My server only allows 1 DataBase for that.
Thanks and I hope my question makes sense. It is basically how can I get it to be able to create and check users etc. online?
Brian
[ProviderException: The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file.] System.Web.DataAccess.SqlConnectionHelper.EnsureSqlExpressDBFile(String connectionString) +2555237 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +87 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160 System.Web.UI.WebControls.Login.AttemptLogin() +105 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Hi,
I am facing the below mentioned error:
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
I have a Insert statement which i am using to insert data into a remote server from my local server. I have added the remote server as a linked server in my local server but when i try to execute the statement i am getting the above mentioned error. I am using Windows Enterprise Edition 2003 and SQL Server 2000.
I have also enabled the Allow InBound and Allow OutBound in the security configuration of My Computer properties but still i am facing the same problem. Kindly let me know how to resolve this issue.
Thanks.
Hi,
I was making a linked server connection between 2 SQL Server 2000 servers (both running on Windows 2003 Server), and I was creating an insert trigger in one of the SQL Server table to insert the same value to the other SQL table. But when I try to make an insert to the table, the following error occurred :
Server: Msg 7391, Level 16, State 1, Procedure <triggername>, Line xx
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
I tried to change the trigger into a SELECT statement only and the error still occurred. But when I tried to insert a row directly to the linked server via Query Analyzer, it succeeded.
I have read KB 280106, KB 306212, and KB 329332, and I've tried SET XACT_ABORT ON statement, but none of them can solve the problem.
If there's anyone who has idea on what's wrong or has a suggestion what I should try please help.
Thank you in advance.
Does anyone out there know a way to export data from the results pane in the Analysis Manager to Excel, or even text? I had thought this would be simple and intuitive to accomplish (after all, it is reasonable to think they would assume you would need to display the results of your analysis), but have found it to be neither. Your help is much appreciated.
View 2 Replies View RelatedI have a DTS that pulls data in from a table in MysQL and inserts it into a tablle in SQL Server. it's failing when I run the step with the "requestd conversion is not supported" error, but when testing each single column copy in the Data Transformation step, it passes.
I just want an exact copy of the data.
the source MySQL table is....
CREATE TABLE `entry` (
`web_id` int(11) NOT NULL auto_increment,
`web_name` varchar(40) NOT NULL default '',
`web_email` varchar(60) NOT NULL default '',
`web_cli` varchar(50) NOT NULL default '',
`web_pu_id` varchar(60) default NULL,
`web_answer` varchar(60) NOT NULL default '',
`web_ddi` varchar(30) default NULL,
`web_time_entered` datetime NOT NULL default '0000-00-00 00:00:00',
`web_ip_address` varchar(20) default NULL,
`web_entry_status` set('failed','success') NOT NULL default '',
`web_polled` enum('true','false') default 'false',
PRIMARY KEY (`web_id`)
) ENGINE=MyISAM;
and the SQl Server destination is....
CREATE TABLE [entry] (
[web_id] [int] NOT NULL ,
[web_name] [varchar] (23) NOT NULL ,
[web_email] [varchar] (37) NOT NULL ,
[web_cli] [varchar] (15) NOT NULL ,
[web_pu_id] [varchar] (15) NULL ,
[web_answer] [text] NOT NULL ,
[web_ddi] [varchar] (11) NULL ,
[web_time_entered] [datetime] NOT NULL ,
[web_ip_address] [varchar] (15) NULL ,
[web_entry_status] [varchar] (15) ,
[web_polled] [varchar] (15) NULL
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
ALTER TABLE [temp_webentry] WITH NOCHECK ADD
CONSTRAINT [PK_tmpwebentry] PRIMARY KEY CLUSTERED
(
[web_id]
) ON [PRIMARY]
GO
sample line of data ...
352711, 'some name', 'email@addre.ss', '0123456789', 'AA_XX-Y-012345-2', '', '098765432', '2005-10-19 23:17:42', '192.168.28.165', 'failed', 'false'
Hi,
Can anybody help me with the following problem:
I have Vista Ultimate installed and within Vista .NET Framework 3.0 is installed as a part of the operating system so I can't remove 3.0
Now for MS SQL Server 2005 Express I need .NET Framework 2.0 and the SQL Server 2005 doesn't work with .NET Framework 3.0
Can't install 2.0, get the message that 3.0 is already installed.
Please help me!!
René
I've installed .NET 2.0 and SQL 2005 express but am unable to locate SQLDMO90.DLL on my machine. I've looked in the expected location (...90inn folder) but it's not there. I've searched the entire drive. Where can I download it?
Thanks!
i installed visual studio'05 on my sys to build cubes in SSAS.But its not having BIDS in its pop-up menu,nor it has BI project templates.Can any one help me out.
Thanks
I have just successfully published an web app and db to a server
but when the web app tries to use a stored procedure it says that
it cannot find stored procedure.....in my data base......eeeer
anyone had this problem
Hi all, I'm being driven to distraction by my inability to find a workable solution here, i'll try and lay out my problem as simple as possible:
My application analyses sentence structure, it stores hundreds of thousands of web pages, and stores all the words on those pages sequentially in a database with a primary id, the id of the page the word is from, and the word itself of course.
ie : id , parent_id , word
What i'm trying to do (which already works successfully in both SQL and MySQL) is to retrieve the word immediately before the one I specify and 3 words after the word I specify. Ideally in one union query but i'll accept it if that's too complex and go for two for now.
Because of the sheer size of the database ( millions of keywords ) I can't afford to retrieve every single record and feed off the top results in the application itself.
I've attempted to use subqueries:
SELECT yek FROM child_barrels A WHERE 3 > (SELECT COUNT(*) FROM child_barrels B WHERE A.yek < B.yek) AND id>'" + id + "' AND parent_id='" + parent_id[x] + "' ORDER BY id ASC
SELECT yek FROM child_barrels A WHERE 1 < (SELECT COUNT(*) FROM child_barrels B WHERE A.yek < B.yek) AND id>'" + id + "' AND parent_id='" + parent_id[x] + "' ORDER BY id ASC
These raise an error on the first select statement in the sub query.
(SELECT yek FROM child_barrels WHERE id>'" + id + "' AND parent_id='" + parent_id[x] + "' ORDER BY id ASC LIMIT 3) UNION (SELECT yek FROM child_barrels WHERE id<'" + id + "' AND parent_id='" + parent_id[x] + "' ORDER BY id DESC LIMIT 1)
Above directly is the original MySQL code.
I would appreciate any help available on this, thanks in advance.
I have a datagridview bound to a table that is part of an Entity Framework model. A user can edit data in the datagridview and save the changes back to SQL. But, there is a stored procedure that can also change the data, in SQL, not in the datagridview. When I try to "refresh" the datagridview the linq query always returned the older cached data. Here's the code that I have tried using to force EF to pull retrieve new data:
// now refresh the maintenance datagridview data source
using (var context = new spdwEntities())
{
var maintData =
from o in spdwContext.MR_EquipmentCheck
where o.ProdDate == editDate
orderby o.Caster, o.Strand
select o;
mnt_DGV.DataSource = maintData;
}
When I debug, I can see that the SQL table has the updated data in it, but when this snippet of code runs, maintData has the old data in it.
How can I tell if the System.Data.SqlServerCe assembly I am referencing is meant for Desktop use as opposed to Compact development? We are using NUnit as our testing framework and I get the following error when I attempt to execute nunit-console on my test fixture referencing SqlServerCe:
System.IO.FileLoadException : Could not load file or assembly 'System.Data.SqlServerCe, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040) ---->
System.IO.FileLoadException : Could not load file or assembly 'System.Data.SqlServerCe, Version=3.0.3600.0, Culture=neutral, PublicKeyToken=3be235df1c8d2ad3, Retargetable=Yes' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
The unit tests run fine from inside of Visual Studio using the Resharper Unit Test Runner...
Matt