Hi,
I have a data flow task where I have mutiple columns (of different data types) , I want to create a single column using all these columns in XML format and load it into a table with a column of datatype XML. Can I accomplish this using Derived column tranformation?
Thanks
Here is my expression in a derived component:
"Failed insert into PONL_WELL. WELL_NO=" + (DT_WSTR,10)PROP_NO
PROP_NO comes from ms sql server , and the derived component datatype for this column is DT_WSTR.
The destination will be ms sql server, and i have a data conversion after the derived component to cast from DT_WSTR to DT_STR.
However, the derived component failed everytime giving me
Error: 0xC0049064 at Load Ponl_Well, Derived Column [1342]: An error occurred while attempting to perform a type cast.
Anyone know how i can eliminate the data conversion component and just do my string and column concatenation in the derived column and have it output as DT_STR?
I am trying to replace the value of a column in a derived column component, but it will not let me change the datatype.
It has decided that the column is a float, which is wrong.
How can I change it to the correct type?
Hi, friend,
l've 2 variables A & B from source database which i used to calculate C with the following formula, i.e.
C = 100 * A/B
In case of B = 0 (DIV BY ZERO), C should be equal to -9999.
l've set the datatype for A & B are INT, C is FLOAT at targetting database.
So l used to derived column to calculate C as,
B == 0 ? -9999 : 100 * A/B
After l run the package, l realize that all my C is INTEGER rather than FLOAT.....it seems that SQL server has evaluate the wrong datatype for me....anyway to overcome this?
how to declare multiple derived columns in SSIS Derived Column Task in one attempt.as i have around 150 columns coming from Flat file. I had created the required Expression in Excel and now i want add those in derived column task but its allowing only 1 expression at a time.
View 4 Replies View RelatedI have a excel file which has a column called "Code" and their values are A,B,C,D,E,F,G,H. I want to create a new column called "status" based on the values of "Code".
Code:
A
B
C
D
E
F
G
H
If A,C,E,G then "status" = "Active" else if B,D,F,H then "Status" = "Inactive". I like to do it using "Derived Column".
Hi,
I have dates in "mmddyy" format coming from the sources and they are older dates of mid 80s like 082580 for instance.
When I cast it this way (DT_DBTIMESTAMP) Source_Date , It says ok but throws a runtime error.
When I hardcode a date in same format, (DT_DBTIMESTAMP) "082580" , It becomes red (an indication of syntax error) . Please note that we use double quotes in expressions in Derived Column Transformation; So an anticipation that using double quotes over single ones would be the syntax problem would be wrong.
Any help in this will sincerely be appreciated.
Thanks
Posted - 09/10/2007 : 15:53:26
Hey all - got a problem that seems like it would be simple (and probably is : )
I'm importing a csv file into a SQL 2005 table and would like to add 2 columns that exist in the table but not in the csv file. I need these 2 columns to contain the current month and year (columns are named CM and CY respectively). How do I go about adding this data to each row during the transformation? A derived column task? Script task? None of these seem to be able to do this for me.
Here's a portion of the transformation script I was using to accomplish this when we were using SQL 2000 DTS jobs:
'**********************************************************************
' Visual Basic Transformation Script
'************************************************************************
' Copy each source column to the destination column
Function Main()
DTSDestination("CM") = Month(Now)
DTSDestination("CY") = Year(Now)
DTSDestination("Comments") = DTSSource("Col031")
DTSDestination("Manufacturer") = DTSSource("Col030")
DTSDestination("Model") = DTSSource("Col029")
DTSDestination("Last Check-in Date") = DTSSource("Col028")
Main = DTSTransformStat_OK
End Function
***********************************************************
Hopefully this question isnt answered somewhere else, but I did a quick search and came up with nothing. I've actually tried to utilize the script component and the "Row" object, but the only properties I'm given with that are the ones from the source data.
thanks in advance!
jm
Can anyone show how to alter the value in a column using DerivedColumn component when creating an SSIS package programatically.
View 4 Replies View Related
Table structure as follows
Employee
Empno empname salary
commission
I want to have an other employee table named employee_modified
Empno empname salary
commission derived_column1(salary+commission)
derived_column2(derived_column1 + xxxx) and so on derive other
columns based on the earlier derived columns)
Is that possible to do it.. or am I doing something wrong.
something like
Select empno , empname , salary , commission,
(salary + commission) as derived_colum1 ,
(derived_colum1 + xxxxx) as derived_colum2 ,
(derived_colum2 + xxxxx) as derived_colum3
into employee_modified from employee
Hi, how are you?
I'm having a problem and I don't know if it can be solved with a derived column expression. This is the problem:
We are looking data in a a sql database.
We are writting the SQL result in a flat file.
We need to transform data in one of the columns.
For example: we can have 3 digits as value in a column but that column must be 10 digit length. So we have to complete all the missing digits with a zero. So, that column will have the original 3 digits and 7 zeros. How we can do that tranformation? We must do it from de the flat file or it can be a previous step?
Thanks for any help you can give me.
Regards,
Beli
Hi, wondering if anyone can help me. I currently have a field that has a date and time in it in the format dd/mm/yyyy hh:mm:ss. Ideally I would like to get rid of the time part of it altogether but for it to still be recognised as a date as opposed to a string. However, I've been told that this is not possible in 2005, is this true? If this is the case, what would be the best way to set the time to 00:00:00 after the date for all records on that field?
View 1 Replies View RelatedI have two columns made up of 4 digits numbers eg col1 1234, col2 9876
I want to create a derived column so i get a eight digit column, eg col3 12349876
I cannot seem to get the expression right, I seem to be always adding the value which i do not want, can someone help me out with the expression
Thanks
Robbie
I am trying to transfer data from SQL Server 2005 table to another SQL Table. In the source table there is a field called Region [nvarchar(max)]. The values for these fields will be like APAC-China, NA-Racine, etc., i.e Region followed by the country name seperated by - symbol. I want the destination tablre with 2 fields Region[nvarchar(max)] and Country [nvarchar(max)]. I am using a Derived Column task to achieve the same.
Can anyone please help me out in doing this data conversion?
Thanks
Hi,
I am doing a task which will get all data based on several base and crosswork tables. I used stored procedure to get the data, but the next step will be using derived column to massaging data, and to load to the destination database. Is there a way to do that since I must generate data on the fly?
Thanks,
Megan
Hi Guys,
How can i put in a derived column the value of 3 columns? I've tried these:
[MyId]+[Paper1]
"[MyId]+[Paper1]"
but no luck. How can i put it right?
Thanks
Gemma
I am trying to create a derived column from two separate fields. One is a date field in format of 2008-03-01 and one is a time field. In DTS I use to have something like this:
DTSDestination("TransactionDate") = cdate(DTSSource("DSRHDATI")) & " " & timevalue(DTSSource("DSRHTIME"))
I am trying to figure out how to do this in SSIS. I know I have to use a dervived column but can't seem to come up with the correct syntax. Any help would be apprecaited. thanks.
Stacy
Can someone help me with the following query? I need to take the derived value from one column and calculate another column with it.
SELECT UserID,
((SELECT COUNT(*) FROM HPN_LeadMatches)+(SELECT COUNT(*) FROM HPN_Painters)) As Total,
(SELECT COUNT(*) FROM HPN_Leads) / Main.Total
FROM HPN_LeadMatches As Main
The error i'm getting says is unkown column 'total'. Is there another way to accomplish this?
Thanks!!
In a Derived Column data flow transformation, why can't I refer to a derived column (added in that same transformation) in the expression for another derived column? It seems I am forced to chain 2 DC data flows, just to do something as conceptually simple as:
a = x + y; b = a²
On a related note: Can I define a variable that is scoped to each row? Can I bind a variable in an expression to avoid creating a new row, e.g.
let a = x + y; a²
as the expression for new row b?
Hi everyone,
I have a quizzing application where users log in, answer questions, and are ranked relative to each other. For this final ranking, I calculate their score using this formula -
score = (correct Qs answered) * 150 / (total Qs answered) + (total Qs answered)
The SQL query that i use to get this info is -
Code:
SELECT TOP 50 username, (sum(correct) * 150 / count(1) + count(1)) AS score, count(1) as totalq
FROM questionsstats
GROUP BY username
ORDER BY score DESC
This works just fine.
However, on top of this I need to put an additional restriction that only users who have at least answered 20 questions be counted in. How can I do this? Adding a simple 'WHERE totalq > 20' does not work. I get the error "Invalid column name 'totalq'.".
Surely there must be a simple way to do this?
Thanks.
Two questions regarding Derived Columns in SSIS
1. In a if else expression if condition is false how do you keep the value of the source column eg: Name == "" ? "Unknown" : Name
Above will change all the non blank values to Name and not the actual value
in the Name Column eg. John
2. I have a column (unicode string)that stores date and time (The source is flat file) Is it possible to write expression to select the 1st day of month based on that date, and use this derived column as input to a table with a datetime field.
Hello, first time here, first time messing with SQL.
When creating a table in SQLServer2005 can you specify a column to be for a derived attribute. example a column monthlysalary and create a column that is a derived attribute - yearly salary. Is this done when creating the table and how is the syntax ?
Hi All
I m designing SSIS having Data Flow as
Flat File > Derived Column Transformation > Destination Table
but while transfering record from text file to table i need some logic here
my text file is
"ID"|"Name"
1012|"10AA"
1013|"10BB"
logic is 10 should be replace by variable VID = 98
I defined this veriable as int
My ID column in database is int and Name column is varchar(50)
I try here expression like
ID != 98 ? @[User::VID] : ID
it work fine
but for varchar column I am not able to do
I got error when i write expression
SUBSTRING(Name,1,2) != "98" ? [DT_STR, 50, 1252] "(@[User::VID])" + rest of value of column : [Name]
my final output in table should be like
ID..Name
98..98AA
98..98BB
Please help me out
T.I.A
I would like to validate datatype using Derived Column.My data type are such as numeric(X,X),datetime,int, and varchar.How do I do this using Derived Column.Example if row does not qualify as ISNUMERIC()...throw it in ERROR table else send it to SUCCESS table.Any Idea ?
View 4 Replies View RelatedHi,I have a view that looks something like this -CREATE VIEW myview AS SELECTmyudf(col1) as col1, col2, col3FROM mytableThe view has an 'INSTEAD OF' trigger on it to do the correct thing oninsert. When I run the bcp, it runs successfully, but the valueinserted into col1 is always NULL. I modified my trigger to get abetter idea of what was happening, and when I look at the values ofINSERTED.col1, they are all null. It appears that bcp is setting thecolumn value to null, presumable because the view definintion for thiscolumn is a derived column.Does any one know a way around this?Thanks!
View 5 Replies View Related
Hi there,
is there a way that I can set the value of a column to the currrent user in a derived shape?
For instance if I want to set the value of a column to the current data I can merely use GETDATE().
What is the current user equivilent?
Thanks
Hi,
I have just started learning SSIS. I have created a new package which is as follows :
SOURCE QUERY ----> Derived Column ------> Destination Customer Info
Source Fields are
FirstName
LastName
OrgCode
Phone
Ref1
The Derived column is adding a new Column name FullName and the friendly expression for it is FirstName + "Null" + LastName
Destination has all the columns are same as source columns with similar datatypes.
When i start the debugging process i get the following error:
[Destination - CustomerInfo [29]] Error: Column "FullName" cannot be found at the datasource.
[Destination - CustomerInfo [29]] Error: Cannot create an OLE DB accessor. Verify that the column metadata is valid.
[DTS.Pipeline] Error: component "Destination - CustomerInfo" (29) failed the pre-execute phase and returned error code 0xC0202025.
Please let me know where i am going wrong.
Thanks
Hi,
I apologize if this question has already asked (I already looked in this forum but do not find the answer), I need to have this done as soon as possible. I've following data:
column1 column2 begin_date active
------------- ------------ ---------------- -----------
1253 1057 1/1/2006 0
1253 1057 1/1/2007 0
1253 1057 4/1/2007 0
1253 1057 7/1/2007 1
I need to have the final result as following: (the new end_date column is the value of the begin_date in the next row -1)
column1 column2 begin_date active end_date
------------- ------------ ---------------- -------- ------------------
1253 1057 1/1/2006 0 12/31/2006
1253 1057 1/1/2007 0 3/31/2007
1253 1057 4/1/2007 0 6/30/2007
1253 1057 7/1/2007 1 null
Any ideas?
Thank you!
I want to implement all this four condition in one derived column expression.
if (Column1== 1)
{
OutputColumn = ColumnA- Column1RATE
}
if (Column2 == 1)
{
OUtputColumn = ColumnA- Column2RATE
}
if (Column3 == 1)
{
OUtputColumn = ColumnA- Column3RATE
}
if (Column4 == 1)
{
OUtputColumn = ColumnA- Column4RATE
}
please suggest
Example: (47 / 204709) * 12000 = 2.754
Both values (47 & 204709) are of data type Int.
SQL Sever - Derived Column Calculation returns 2.74
The destination data type is Float
I have converted the data types to Float, Decimal & Numeric and still got the same answer.
Any suggestions
I am importing States into a table and need to change all NULL fields before I perform a lookup. I'm using a derived column to replace the state value. I'd like to find all States that are blank and set it to "--".
Ironically, this works:
State != "" ? State : "--"
but
State == "" ? State : "--"
Does not work
Can someone tell me why?
I have this expression
(Registered_Units == Limited_Units) ? 0 : (Painted_Units / (Registered_Units - Limited_Units)) * 100)
It gives me 0.00, although those 3 columns have values.
if I cast it like this
(Registered_Units == Limited_Units) ? 0 : ((((DT_DECIMAL,2)Painted_Units) / ((DT_DECIMAL,2) (Registered_Units - Limited_Units))) * 100)
It gives me correct answer in whole number but .00 after decimal.
Any clue how to fix it ?
I have a complicated derived column. In a Crystal report it is this:
if isnull( {YSA.YSAbA}) then
(
stringVar accountPart1 := "1";
stringVar accountPart2;
stringVar accountPart3;
stringVar accountPart4;
if left({YAAREP.A7KMCD},2) = 'aa' then
accountPart4 := '01'
else if left({YAAREP.A7KMCD},2) = 'bb' then
accountPart4 := '02'
else if left({YAAREP.A7KMCD},2) = 'cc' then
accountPart4 := '03';
select {YAAREP.A7KNCD}
case "39000": accountPart3 := "115" //this is freight
case "35000": accountPart3 := "110"
case "36000": accountPart3 := "105"
default: accountPart3 := "105";
if "SERVICE" in {YAAREP.A7KMCD}
//if MIKE RYAN
then accountPart2 := "3300";
if {YAAREP.A7KNCD} = "39000" //this is freight
then accountPart2 := "4300";
if cdbl({YAAREP.A7KNCD}) > 44000 then
accountPart2 := left({YAAREP.A7KNCD},4);
if cdbl({YAAREP.A7KNCD}) > 44000 then
accountPart3 := right({YAAREP.A7KNCD},3);
accountPart1 + "-" + accountPart2 + "-" + accountPart3 + "-" + accountPart4
)
else {@PrintDefaultSalesGL}
How should I do this in an SSIS? Or do I need to show how do this in SQL Query?
Thanks for the help!