Hi,
Does any one have a workaround this issue. If I designed a package from SQL2000 and save it on SQL 7, I can't open/execute it from SQL 7.0. My workstation is SQL 2000 and the server is SQL 7.0, even if I have the same SQL 7 but different SP.
Thanks
I have received the error message "Package migration from version 8 to version 6 failed".I have developed a SSIS package with Visual Studio 2013 which gives me PackageFormatVersion of 8. I then deploy my package to the ssisdb catalog that is running on a SQL Server 2012, this works fine but when I try to execute the package the error arises…due to SQL Server 2012 has a PackageFormatVersion of 6 and it can’t run something that has a greater version.I haven’t seen any good solution for this but one that would work for me would be to upgrade the Integration Services Server from 2012 to 2014, leaving everything else in 2012 (database, ssms, ssas, ssrs).Would this solve the package format problem? Would I then be able to execute my packages in the ssisdb catalog?
View 3 Replies View Related
Hi,
I have Table A . we already have 80 columns . we have to add 65 more columns.
we are populating this table from oracle .and we need to populate those 65 columns again from the same table.
Is it a better idea to add those new 65 columns to the same table or new table.
If we go for the same table then loading time will be double, If I go for new table and If i am able to run both the packages which loads table data from same oracle server to difffrent sql tables then we should be good. But if we run in to temp space issues on oracle server . Then i have to load the two tables separately which consumes the same time as earlier one.
I was thinking if there is a way in SSIS where I can pull data from same oracle table in to two diff sql tables at same time?
I need to write a 'select' statement to fetch data from different tables, which are located on different servers.
Can any one help in writing this 'select' statement with out moving the tables on to same server.
Thanks in Advance.
Murali Raparla.
We have a Silverlight based application which currently supports only one production version. Idea is to support three concurrent versions of the same application and user will switch to the newer versions based on their interest or they can still continue with the older version.
We still have to use the existing database for all these three versions.
What is the best way to architect this so that we can differentiate the code between the versions and still keep the data in sync and run all the versions in parallel.
I have a DTS package saved as a 'Structured Storage File.' However, I do not have it saved as an actual package in Enterprise Manager.
Can you tell me how I can open that as a package so I can make modifications to it?
Thanks!
Brian
Dear All,Access adp on sql-server 2000After upgrating to A2003 updating data with 1 perticular combobox causes theprogram to hangs without any error-msg.Traying to change te combobox recordsource i get this error:This version of Microsoft Access doesn't support design changes to theversion of Microsoft SQL Server your project is connected to. See theMicrosoft Office Update Web site for the latest information and downloads(on the Help menu, click Office on the Web). Your design changes will not besaved.The solution in :http://support.microsoft.com/defaul...kb;en-us;313298tolks about SP 'dt_verstamp007' but I have SP 'dt_verstamp006'What should I do.Is the failure of the combobox also caused by the absence of dt_verstamp007???Filip
View 2 Replies View RelatedTwo Questions.
1.) I have developed some SSIS packages that are currently out in production. We are on to the next phase of development and enhancments to the packages are being developed as a phase 2 release. I can push these changes to a QA setup for testing. But I also need to do fixes to the existing packages out in production and run them through testing. Unfortunatly I do not have an extra server to have a QA and a QA Current Production setup for seperate testing. So is there any way to run two versions of the same package on one (the same) server? I presently store the packages in the MSDB. Can I have or specify which version of package to run?
2.) Additionally, can you run multiple configurations for a single version of a package but only call one of them? For example can I create two configurations and then specify which one to use when calling the package to run? So that I could have code pass which configuration to load which would change connection strings and such. Any examples would be awesome.
Thanks.
Hi everyone,
Is Microsoft thinking over the possibility to implement Control+Z in order to avoid drawbacks when you're writing a package? I mean, when you drop a container then you aren't able to retrieve again
.
That same behaviour happened with Sql2k-dts.
Thanks in advance and regards,
Can anybody give me design ideas on the following?
I have numerous tasks, any one of which can fail. I want to point them all (via 'Failure' constraint) to a SendMail task for a "failure notification" email. This I have setup, and is working fine. Now, I want to have a changing message for the email's body (MessageSource) to say "Process A has failed", or "Process B has failed", etc.
My initial thought was to add a variable, then add a ScriptTask between each task and the single SendMailTask, have the script update the variable, and have the MessageSource (body of email) mapped to the variable. Is this the proper way to go about this? Seems like if I have 20 processes that could fail, then I'll have to add 20 script files; this becomes a bit unwieldy the more processes that I want to monitor.
Is there a better way to accmoplish this?
Thx,
Mojo
I have several versions of one SSIS Dataflow component. I need to bind some of them( definite version) to my SSIS package. How can I do that?
Thanks in advance.
Hi all,I'm fairly new to this...I't trying to design a DTS package on SQL Server 2000`, which willconnect to the server, export some table date into a .txt file (basedon a select statement) and then delete the data from the table (basedon a delete statement) upon successful completion of the export.So far so good..Now, upon the successful deleteion, I want to export some more data andthen (upon the successful export) to delete the data. I want to repeatthis process approx. 10 times.Though, when I try to link the deletion to the new export on success, Iget the message: "Defining the precedences between the selected itemsis not valid."Any idea on how I can accomplish what I want to do?thanks a lot
View 3 Replies View RelatedAll:
This proably is an unsual request. I have developed a package that runs fine and does what it is supposed to do. I am jsut not sure if I have developed it in the most efficient way. I have several years of ETL experience but only about 6 months with SSIS. I know I can benefit a lot if I had my package reviewed by an expert.
I realize that I am asking for some time committment on your part and so would understand if I do not get any takers. But if you would like to review my package and offer suggestions on its improvement please let me know. We can work on the logistics of getting the package to you.
Thanks!
Hello,
I have designed a quite small SSIS package and everything worked just fine .
Untill I moved the SSIS project folder to another solution folder and added whole solution to Visual source safe.
Since then opening the package for design has become unbelievably slow, debugging it even worse.
I think the cause is in moving the SSIS project folder. But I have no idea how to fix this.
Any suggestions ?
Janez
Hi
I am busy designing a ETL solution and have a question about how to design the packages.
We have over 30 source systems for different customers. We are building a WH that will combine all this data for analysis. The main issue is that these systems are always at different versions of the software. When a patch is released, it usually goes to one or two for a Beta process before it moves to the rest. These patches can affect the DB design, and we would want to be able to extract any new data as it comes available from the systems that have it.
Solution 1 - Package Versions
The idea was to create the SSIS packages with a version number in their name. For each change, you would create a new version. The Batch control application that is being developed will store which system needs to use which version of the package.
Solution 2 - Multiple paths within a package
This was to create a single package for each table, with a conditional split as the first task. The batch system will still provide which path the package needs to take with different Data Flow tasks containing the different column mappings.
Both have pros and cons, but was wondering if anyone has experience with this type of setup and which way worked best, or if there are any other options.
Many Thanks
Michael
Greetings SSIS friends,
I am in the process of designing a package for populating a Dimension table for my new data warehouse. I would like to discuss with you my proposed solution in the hope that some of you will be able to advise me on any mistakes that I have made so far.
I have 3 source tables which are used to populate my Dimension table (I will restrict each source table to a few columns to keep this simple).
The source tables are :
Meetings (MeetID, NameID, Meeting_Start_Date, Meeting_End_Date, Meeting_Time_Stamp)
Events (EventID, MeetID, Event_Start_Date, Event_End_Date, Event_Time_Stamp)
Names (NameID, Long_Name, Short_Name, Names_Time_Stamp)
My Dimension table structure is very basic as follows :
Product_DIM (EventID, MeetID, Meeting_Long_Name, Event_Long_Name..... Meeting_Time_Stamp, Event_Time_Stamp)
Please note that I haven't included the start and end dates to keep this simple, but in my real solution, the Dimension table has many more columns.
The Meetings and Events tables contains hundreds of thousands of records so when my package is run, I should only retrieve information that has changed since the last time my Dimension table was populated. This is why I store the time stamps in my Dimension table.
So when my package runs, I get max(Meeting_Time_Stamp) and max(Event_Time_Stamp) from my Dimension table then retrieve all records from the source table where their timestamps are GREATER than the max values.
The problem is this :
If in the source system, an event is changed, the time stamp associated with that record will change value but the meeting record associated with that meeting will not have its time stamp changed.
How do I ensure that when my package is run, I retrieve all meeting and events information even if one hasn't changed?
Should I build a table made of IDs?! And if I do need to build a table made up of IDs, should I store this as a permanent table in my database or is there an SSIS data structure I can use to hold this information?
I hope this makes sense!
We are downloading 4 large (500mb) zip files in the package. Those come from 4 different FTP sites. Sometimes the FTP download on one of those fails.
Zip files contain images which need to be uploaded for existing listings. Each zip file is processed the exact same way. The question is how can I make the SSIS package so that each downloaded zip file can be processed immediately after the download - and not duplicating the processing logic?
Hello,
I am new to SSIS. I need to transfer data from SQL Server 2005 Operational Database to SQL Server 2005 Report Database. The upload needs to work every night. There are few master tables and remaining are transactions tables.
I am planning to create 2 packages one for master tables and other for transactions tables.
Is it the good approach?
Also few of transaction tables are heavy in terms of number of records. Will it better if i further break them in many packages?
I am using book "Microsoft SQL Server 2005 Integration Services Step by Step".
Can you suggest any other good book?
Regards,
Shailendra Shelar
Win 7 SP1 x64 PC. I installed SQL Server 2014 Dev Edition + Visual Studio 2015.
I'd like to create some basic ETL SSIS packages, and I worked very comfortably in 2008R2.
For 2014, I started with this tutorial:[URL]However, it says to go to Start->All Programs->Microsoft SQL Server->SQL Server Data Tools.
I did explicitly install SSDT when I installed VS2015. I also installed it separately. I see SSDT listed in Programs, and SSIS is running according to SQL Server Config Manager, and Services. Half of Microsoft's docs seem to be 2012 era, which is a shame because 2014 is out and it's nearly 2016...
how do I get to the GUI where I can design ETL packages?
OK, I was able to successfully migrate all of my DTS packages to SSIS, for SQL 2005. I can log into intergration services and see my packages listed under:
servername --> stored packages --> msdb. Now my question is, how can I open these packages, not run them open them in a design mode like you can in SQL 2000, you can double click on the package name and view the design of the package. how can i do that now that I have them in SQL 2005?
Is there any way to restore a database of higher version to lower version.
E.g. I have created a database in sql server 2012, created some tables & procedures in that.I took Full backup of that database. Can I restore it to sql 2008r2 or any lower version.
I know direct restore is not possible, I have to use either import or export option or generating script,but i want to know is there any easy step to do so.
Vimal Lohani
SQL DBA | MCP (70-461,70-462)
Hi all,
Since some analysis services features are only available in Enterprise version , I have to upgrade my SQL 2005 server from standard edition to enterpise edition.
So I uninstall originial standard version of analysis service and install a Enterprise version. However, the analysis service is still a standard version after installation.
Is it possible to keep data engine as standard version and install a enterprise version of analysis service?
Thank you very much
Tony
Hello,I have been searching and reading a lots of information on the microsoft website about the different version of SQL server, but still can not make my decision.In term of performance, is there a real big difference between the workgroup and the standard version? The workgroup is limited to 3 GB of RAM while the standard is unlimited, would that really change the performance if my server has 16Gb or RAM?The price difference is pretty substantial so if could only have to buy the workgroup , it would be better.One more question, regarding the type of licence, my server has 2 processors, could I avoid buying 2 licences and get the Server plus CAL instead. I am using this server to host 4 web-application running on SQL server. Each database is about 15 MB.Thanks in adavance for your advises.Arno
View 3 Replies View RelatedI am wondering if it is possible to change from SQL Server Enterprise Evaluation Version to Developer Version. The reason is because the Enterprise Evaluation version expires after 180 days. So if I create reports and cubes in Enterprise Evaluation I can import them into Developer Edition right? Should I remove the Enterprise Evaluation version after 180 days or leave it then install Developer Edition?
View 1 Replies View RelatedHi,
I have tried to attatch a database ,created by SQL server Express within a C# application , in SQL server 2005 Enterprise edition, but the following error message appears:
-----------------------------
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'MEDO'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft SQL Server&ProdVer=9.00.1187.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The database 'E:X.MDF' cannot be opened because it is version 611. This server supports version 607 and earlier. A downgrade path is not supported.
Could not open new database 'E:X.MDF'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 948)
------------------------------
so , how can I solve this problem , I need to reed the data resides in the tables of 'X' database , how can I do it?? please help me.
Thanks in advance for any help.
Aya.
I have an ssis package that downloads a SQL Server 2000 database and restores it to a SQL 2005 server. Ninety-five percent of the time it runs just fine, but every so often the job fails and I get the following set of error messages in the log file. (I have had to delete some of the proprietary information for this message to satisfy my boss like putting in [Database name] in place of the actual name of the database in the error message).
OnError, Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611.
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611.
OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551.
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551.
OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name].
OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name].
OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name]
FROM DISK = '[Path to back up file]' WITH REPLACE,
MOVE 'ASP_Live_Data' TO [Path to MDF file],
MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name]
FROM DISK = '[Path to backup file]' WITH REPLACE,
MOVE 'ASP_Live_Data' TO [Path to MDF file]',
MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
OnTaskFailed,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,(null)
Does anyone have any suggestions?
Want to upgrade Evaluation version of SQL 2005 to full retail version. How would I do that. Thanks very much for your hel
Sam Commar
Now, I checked and verified that my backup version of SQL Server is the same as the version installed on the computer I'm restoring too.
I have SQL Server on a production machine that I backed up and want to test a full restore on a dev machine to make sure it will work when I need it to.
Now that I've run the restore command on my tape backup and go to restart the SQL server service I receive:
Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
I'm afraid I don't understand why this is happening. If the builds are the same, then shouldn't restoring the MASTER database have worked normally and I'd be able to restart the service now?
Any thoughts or suggestions?
We want to licence a trail version 2005 EN with an fullversion of MS Sql server 2005 EN. Is that possible?
Conworx
I have the trial version of SQL Server 2005 installed and have setup a couple of databases. This trial version will expire in another few weeks. I recently purchased a copy of the software and want to install it. Will I lose my databases, user info, etc? How do I go about installing without losing anything?
View 3 Replies View RelatedWe have a 64bit os machine that we accidently loaded the 32 bit version of sql server on. We now want to upgrade it to 64 bit sql server, but we now have a production database on it. My understanding is that all I have to do is detach the production database, upgrade to 64bit sql server, then reattach the database. Is this really all I have to do?
View 4 Replies View Related
I started this thread as the last attempt to sort the issue out.
I have an SSIS package that loads data from a .csv file into my database. It works fine on my developer machine. I start it programmatically or from Management Studio or from Visual Studio, and it works. Then I deploy it to the MSDB database on the computer on which it will have its final place. There again I can start it from Management Studio or from Visual Studio (using the source file), and it works. But when I start it programmatically, it just fails telling me:
Package Warnings:
Package Errors:
The version of component "****" (11773) is not compatible with this version of the DataFlow.
Component "component "Derived Column" (13627)" could not be created and returned error code 0x80070005. Make sure that the component is registered correctly.
The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Flat File Source;Microsoft Corporation;Microsoft SqlServer v9; (C) 2005 Microsoft Corporation; All Rights Reserved; http://www.microsoft.com/sql/support;1".
component "Agreement File" (11773) failed validation and returned error code 0xC0048021.
One or more component failed validation.
There were errors during task validation.
Maybe the source of the problem is that this machine is a 64-bit one, while the developer machine is 32-bit one. But why does the package run fine when I start it from Management Studio?
Any help would be appreciated.
FMikee
Can some one here give me more insight about how to upgrade a SQL Server 2005 Standard Version (32 bits) to a SQL Server 2005 Enterprise Version (32 bits) as default instance on a Windows 2003 enterprise OS (32 bits). I want to know what is the easist way and what is the safest way. May I preserve some settings I have for the STD version, or I have to start from strach again to configure the server? Is there any catches, anything I should have attention to (We are using heavily about CLR and fulltext indexing)?
Thanks a milliom
Ning