Device Error Or Device Off-line ???
Apr 14, 2006
Hi to All
when i m trying to execute following code
backup database web
to disk = 'c:inetpubwwwrootackupmybakup.bak'
with format
I m Getting Error like :
Server: Msg 3201, Level 16, State 1, Line 1
Cannot open backup device 'c:inetpubwwwrootackupmybakup.bak'. Device error or device off-line. See the SQL Server error log for more details.
Server: Msg 3013, Level 16, State 1, Line 1
BACKUP DATABASE is terminating abnormally.
This error is Generated only when i m trying to access folders within "wwwroot" but not in any other folders , even command runs success fully for "wwwroot" folder . !!
but not for any subfolders of wwwroot.
Can Any One Help Me ??
View 6 Replies
ADVERTISEMENT
Nov 17, 1998
I have a database in development in SQL Server 6.5 that needs to be occasionally deleted and rebuilt from a script when table structures are changed. I found that when very complex queries were performed, the 2 MB default size of tempdb filled up and returned errors, so I went to the Enterprise Manager to expand tempdb, learned that I had to first expand a device to expand tempdb into, and foolishly chose to expand tempdb into the same device space used by my application, instead of into one of the system databases. Now when I try to delete the device in preparation for its rebuild, the Enterprise Manager responds with an error message saying the device can't be deleted because it contains system tables. Is there any way to get the expanded portion of tempdb out of my application device so that the device can be deleted, without reinstalling SQL Server?
View 1 Replies
View Related
Jun 19, 2006
Basically I've been using Visual Studio 2005 for a few weeks now moving a Pocket PC project from 2003 to 2005. When I hit the Start Debugging Button every time until today the project would rebuild and deploy to my pocket PC allowing me to debug etc but now I get
The remote connection to the device has been lost.
Please verify the device conection and restart debugging.
I used to get this problem in VS2003 sometimes and just like the numerous posts on different sites that I've looked at the problem eventually goes away and I'm none the wiser. One guy said that he found that if he went to bed the problem was resolved when he came back!
My PDA running Windows 2003 2nd Edition is directly connected to my PC via a USB port. I've rebooted my PC and done a soft reset on the PDA but it didn't help. I'm using ActiveSync 4.1.
Does anyone know how to resolve this problem?
View 54 Replies
View Related
Apr 5, 2007
Hi All,
Currently I have a PC that has MSDE installed on it and is attached to database (MyData.MDF and a log file MYLog.LDF) located on its hard drive at c:data. When I detach from the database, place a copy of the two files noted above on my network drive @ u:data and try to attach I get the following error€™s:
SQL[1] exec error = -1: Changed database context to 'master'.
€œDevice activation error. The physical file name u:dataMyData.MDF may be incorrect.€?
I have done some testing a have found that I can attach to a copy of my database if I move it anywhere on the c: drive, and or even to a 1Gb USB key attached to the system(e:). So far it seems to only be an issue if I move it to a mapped network drive. If anyone could please provide me with any info it would be greatly appreciated.
Thanks.
James D.
View 4 Replies
View Related
May 23, 2007
We are using sql server 2005 Enterprise Edition with service pack1
I got the following error messages in the SQL log
The operating system returned error 21(The device is not ready.) to SQL Server during a read at offset 0x00000000090000 in file '....mdf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
fcb::close-flush: Operating system error 21(The device is not ready.) encountered.
I got these errors for about 2 hrs and after that I see these messages in the sql log
Starting up database ' '
1 transactions rolled forward in database '' (). This is an informational message only. No user action is required.
0 transactions rolled back in database ' ' (). This is an informational message only. No user action is required.
Recovery is writing a checkpoint in database ' ' ( ). This is an informational message only. No user action is required.
CHECKDB for database '' finished without errors on (local time). This is an informational message only; no user action is required.
Can anyone please help me in troubleshooting this issue. Why this migh have happened.
any help would be appreciated.
Thanks
View 5 Replies
View Related
Jan 26, 2004
I am using 6.5 .
Here is the error that i get
Think that tempdb is small how do i change that or what is this error about'
--------------------------
AIMSMan
---------------------------
Application-defined or object-defined error 40002
37000: [Microsoft][ODBC SQL Server Driver][SQL Server]Can't allocate space for object '##RevByNetSALIMJUMMA' in database 'tempdb' because the 'default' segment is full. If you ran out of space in Syslogs, dump the transaction log. Otherwise, use ALTER DATABASE or sp_extendsegment to increase the size of the segment.( 1105)
ODBC
I only have data and log device how do i increase the tempdb device
let me know
SEJ
View 4 Replies
View Related
Nov 8, 2006
rajesh writes "Hi All
When i attach my production database i got an device activation Error
cannot
attach database."
View 2 Replies
View Related
Sep 18, 2007
hi, I have a customer that I look after the server for, they have a scanning system that runs with sql server they have started getting the message below despite 30gb of free space any ideas on a fix?
Warning: mkdir() [function.mkdir]: No space left on device in C:InetpubwwwrootDMSadd_external_file.php on line 38
Warning: mkdir() [function.mkdir]: No space left on device in C:InetpubwwwrootDMSadd_external_file.php on line 45 Unable to upload file:C:/office files/Scanning/119129/Estate Agents/SP.pdf
View 8 Replies
View Related
Jul 14, 2015
I am trying to take backup on network folder but I am getting below error:
Msg 3201, Level 16, State 1, Line 9
Cannot open backup device 'xyz.xy.z.xyabcdexyxyzarchive_2015_7_14_11_14_58.Diff'. Operating system error 1326(Logon failure: unknown user name or bad password.).
Msg 3013, Level 16, State 1, Line 9
BACKUP DATABASE is terminating abnormally.
NOTE:- The folder abcde is protected by password , When I try to open the xyz.xy.z.xy, I provide password to connect.
I am using the below script :
DECLARE @filename VARCHAR(255)
SELECT @filename ='xyz.xy.z.xyabcdexyxyzarchive_' +Â
 LTRIM(STR(DATEPART(year, GETDATE()))) + '_' +
 LTRIM(STR(DATEPART(month, GETDATE()))) + '_' +
[Code] ...
How to troubleshoot / resolve this error permanently?
View 8 Replies
View Related
Sep 19, 2007
We are getting an extremely strange SQL CE error 25955 when running some queries on a specific Windows Mobile 5 device in a .NET CF2 application. The app has been tested on a wide range of devices (both WM5 and WM2003), but this error only happens on one of them (details follow).
Error details (SqlServerCeException)
NativeError = 25955
Message = "Unknown error [ float,numeric ]"
(HResult = -2147467259)
SQLCE books online say: token: SSCE_M_QP_BAD_BOOL_OP_TYPE, description: The data type is not valid for the Boolean operation., string parameters: Data type (if known), Data type (if known)
Query details
The following query text fails:
Code Snippet
select X, Y, Z from TableName where KeyValue1 = 79.3 and KeyValue2 = 0This one works (note the absence of decimal):
Code Snippet
select X, Y, Z from TableName where KeyValue1 = 70 and KeyValue2 = 0
DB table details
Column types: X, Y, Z and KeyValue1 are float, KeyValue2 is bit
Composite PK on columns KeyValue1 and KeyValue2
So it seems the SQLCE query processor has trouble matching 79.3 with the float type column, considering the value to be a numeric instead... while that works perfectly on every tested device except this one.
Device model: Mio DigiWalker A701 (WM5 with phone - other tested WM5 devices with phone do work fine)
SQL version: SQL CE 3
Anyone with an idea/suggestion will be most welcome.
Thanks in advance!
simon
View 3 Replies
View Related
Apr 16, 2007
New to VS2005 and I've got a simple WM5 app that runs fine on the emulator, but when I do a deploy to the device and try to run it I get:
'System.Data.SqlServerCE, Version = 3.0.3600.0, Culture = neutral, PublicKeyToken = 3BE235DF1C8D2AD3' or one of its dependencies, was not found.
I have added the *.sdf to the Deploy project and in the dependencies portion of the Deploy project it has the "System.Data.SqlServerCE.dll" listed.
Appreciate any comments or suggestions.
Thanks,
John.
View 8 Replies
View Related
Nov 15, 2006
Hi,
I have a package which reads an XML file from a certain folder and parses it.
I deployed my package onto the server. Copied XML files on the D: drive the following folder on the server.
Dim reader As New Xml.XmlTextReader("D:AppsRequestClientsClientsStatus.xml") is fine.
But
Do While (reader.Read())
generates "The Device is not ready"
I think it is still trying to read it from my desktop on which I don't have a D drive.
Any help is appreciated.
View 13 Replies
View Related
Apr 25, 2007
Here is the error, I receive:
Msg 5105, Level 16, State 4, Line 1
Device activation error. The physical file name 'L:Program FilesMicrosoft SQL ServerMSSQLLOGTestDB_Log.LDF' may be incorrect.
Device activation error. The physical file name 'L:Program FilesMicrosoft SQL ServerMSSQLLOGTestDB_Log.LDF' may be incorrect.
Msg 5170, Level 16, State 1, Line 1
Cannot create file 'L:Program FilesMicrosoft SQL ServerMSSQLLOGTestDB_log.LDF' because it already exists.
Msg 1813, Level 16, State 2, Line 1
Could not open new database 'TestDB'. CREATE DATABASE is aborted.
Here is my attach script:
USE [master]
GO
sp_attach_db @dbname= N'TestDB',
@filename1 = N'S:Program FilesMicrosoft SQL ServerMSSQLDataTestDB.MDF',
@filename2 = N'L:Program FilesMicrosoft SQL ServerMSSQLLOGTestDB_Log.LDF'
This server has a Raid 5 Disk Array partitioned into three Logic Drives C:, S:, L:. Not sure, why the server was configured this way. If I attach the database with the data and log files on the same logical drive, the DB attaches successfully. When I try to put the data and log files on separate logical drives, it fails. Issue seems to be with the drive partitioning. Any Ideas?
View 4 Replies
View Related
Aug 11, 2009
It's OS / SQL related. I backup to a UNC device, and frequently get a network related error - but not always. And the error is also OS related...
The scene: 64 bit Windows Server 2008 hosts 64 bit SQL 2008 Standard, and devices are created to point to 64 Server 2008 Server B (ServerBSQL_backupsdvc_DB.bak). The database is backed up daily, on a job, and when run the following error is returned:
Date2009/08/08 06:43:30 AM
LogJob History (Backup_AssetData_2009-08-08)
Step ID3
ServerSQL01
Job NameBackup_AssetData_2009-08-08
Step NameBackup Database - Second Attempt
Duration00:05:33
Sql Severity16
Sql Message ID3013
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted0
Message
Executed as user: COMPANYSERVICE_USER. Processed 94096 pages for database 'AssetData', file 'AssetData' on file 1. [SQLSTATE 01000] (Message 4035) Processed 1 pages for database 'AssetData', file 'AssetData_log' on file 1. [SQLSTATE 01000] (Message 4035) The operating system returned the error '64(failed to retrieve text for this error. Reason: 15105)' while attempting 'FlushFileBuffers' on 'dvc_AssetData(
iscsrv-dcm04RISCSRV-SQL01_Backupsdvc_AssetData.bak)'. [SQLSTATE 42000] (Error 3634) BACKUP DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
The file is generated, the same size as a successful backup, but the job terminates unsuccessful.I have tried to delete the devices' file, and then the backup usually succeeds. This may point to a permissions' type error, but the user the job is run under is a domain admin. The destination server is not unavailable during this time, and the network shares also remain active throughout the excersize - although I haven't got a way to "prove" this.
I have a few databases that backup to the UNC described above (different files) that don't fail..My SQL2000 server backs up it's databases to the SQL2008 server, and those backups don't fail with this error.
My research has led me to understand that the 64bit OS tries to buffer the files it receives from another server, and I was wondering if this could be influencing the backups as the destination server is also 64 bit Windows Server 2008.
##20090812## UPDATE
I tried another way to do the backup; with the same results:
Backup database Infovest to disk = '
iscsrv-dcm04
iscsrv-sql01_backupsdvc_Infovest_Z.bak' with INIT,STATS=1
[code]....
View 9 Replies
View Related
May 19, 2006
I have an SDF using SQLCE 2.0. When I run the app on a Pocket PC device running Windows Mobile 5.0 I get 0x80004005 and 0x80040e21 errors. The same app executes fine on PPC 2003.
The app is written in VC++ using and uses the SQLCE OLEDB Provider to access the SDF. It is complied with eVC 4.0
Any idea as to the problem?
View 5 Replies
View Related
Mar 12, 2008
This is my first attempt to use SQL Server Compact with Visual Studio 2005.
I wrote a program for Inventory Scaning which requires the database to be stored on an SD Card. As long as the device is left powered on, the programs function normally. However, if the device powers off and is then turned back on the 0xC0000005 error is displayed when the program attempts to do anything with the SQL Connection.
I have also written a small sample program to test and the results are repeatable each time.
The sample program consists of a single form with six buttons (Create Database, Open Database, Insert Records, Delete Records, Close Database, Dispose Database).
Both programs are written in VB.
Here is the code for the sample program.
Public Class frmSQLTest
Private cnDB As System.Data.SqlServerCe.SqlCeConnection
Private connString As String
Private Sub frmSQLTest_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Me.txtDB.Text = "Storage CardTest.sdf"
End Sub
Private Sub txtDB_LostFocus(ByVal sender As Object, ByVal e As System.EventArgs) Handles txtDB.LostFocus
connString = "Data Source=" & Me.txtDB.Text
Me.txtStatus.Text = "Connection String Set"
End Sub
Private Sub btnCreate_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCreate.Click
If Me.txtDB.Text = Nothing Then
MessageBox.Show("Unable to Create Database")
Exit Sub
End If
Dim eng As New System.Data.SqlServerCe.SqlCeEngine(connString)
eng.CreateDatabase()
eng = Nothing
Me.txtStatus.Text = "Database Created"
End Sub
Private Sub btnOpenDB_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnOpenDB.Click
Dim sqlDB As New System.Data.SqlServerCe.SqlCeCommand
If cnDB Is Nothing Then
cnDB = New System.Data.SqlServerCe.SqlCeConnection(connString)
End If
cnDB.Open()
Me.txtStatus.Text = "Database Opened"
sqlDB.Connection = cnDB
sqlDB.CommandText = "CREATE TABLE Master (Item nvarchar(12), Description nvarchar(19))"
sqlDB.ExecuteNonQuery()
sqlDB.CommandText = "CREATE INDEX idx_Master on Master (Item)"
sqlDB.ExecuteNonQuery()
Me.txtStatus.Text = "Master Table Created"
sqlDB = Nothing
End Sub
Private Sub btnInsert_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnInsert.Click
Dim RecCount As Long
Dim sqlDB As New System.Data.SqlServerCe.SqlCeCommand
sqlDB.Connection = cnDB
For RecCount = 1 To Me.nudRecs.Value
sqlDB.CommandText = "INSERT INTO Master ([Item], [Description]) " _
& "VALUES ('" & RecCount.ToString & "','Test Item " & RecCount.ToString & "')"
sqlDB.ExecuteNonQuery()
If RecCount Mod 100 = 0 Then
Me.txtStatus.Text = "Updating Record..." & RecCount.ToString
End If
Next
Me.txtStatus.Text = "Records Inserted"
sqlDB = Nothing
End Sub
Private Sub btnDelete_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDelete.Click
Dim sqlDB As New System.Data.SqlServerCe.SqlCeCommand
sqlDB.Connection = cnDB
sqlDB.CommandText = "Delete FROM Master"
Me.txtStatus.Text = "Master Table Cleared"
sqlDB = Nothing
End Sub
Private Sub btnCloseDB_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCloseDB.Click
cnDB.Close()
Me.txtStatus.Text = "Database Closed"
End Sub
Private Sub btnDispose_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDispose.Click
cnDB = Nothing
System.IO.File.Delete(Me.txtDB.Text)
Me.txtStatus.Text = "Database Diposed"
End Sub
End Class
In my tests, I start the program (loaded on the Storage Card in the same directory as the database). SQL Server Compact is also installed on the SD Card to save space in Main Memory.
Steps to Re-Create the Error:
1. Click the Create Database button. Database is created properly.
2. Click the Open Database button. Database connection opens properly.
3. Click the Insert Records button. Records are inserted into the table properly.
4. Turn off the Symbol MC3000 unit.
5. Turn the unit back on.
6. When I click on any of the following buttons, the error is displayed. Close Database, Insert Records, Delete Records.
I have also tried closing the database (as well as closing and disposing the database) prior to step 4 above, but when I try to re-open the database (or create the database) again, the error displays.
Is there anyway to correct this issue?
With the real program, the database must be kept open as long as each form is open to prevent speed issues and the database must be stored on the SD Card since there is not enough storage space available on the device.
View 3 Replies
View Related
Sep 25, 2007
Hi,
Please provide some help regarding the "Interface Defining Error: IID_IDBDataSourceAdmin" error while trying to create a SDF database using Query Analyzer on a Windows CE 5.0 mobile device (Symbol MC3000).
Error: 0x80004005 E_FAIL
Native Error: 28558
Description: SQL Mobile encountered problems when creating database [,,,,]
Param. 0: 0
Param. 1: 0
Param. 2: 0
Param. 3:
Param. 4:
Param. 5:
A list of (related) installed packages:
NETCFv2.wce5.armv4i.cab
sqlce30.dev.ENU.wce5.armv4i.CAB
sqlce30.repl.wce5.armv4i.CAB
sqlce30.wce5.armv4i.CAB
PS.
Basically I have developed a mobile application that programmatically creates the database, the code worked on a similar device (Win CE 50), trying to run the application on a new device resulted in database creation errors. I tried creating a test database manually .. and this is what I got.
Browsing MSDN or searching on the Forum did not help.
~Zarko Gajic
View 3 Replies
View Related
Feb 9, 2007
I have set up a locahost site in IIS using the "Configure Web Synchronization Wizard". One of the first test I was asked to do was to open a broweser and browse to http://localhost/MobileTest/sqlcesa30.dll
If all is well I should get a web page with the following line:
SQL Server Mobile Server Agent 3.0
But unfortunately I get an error stating :
"The server has encountered an error while loading an application during the processing of your request. Please refer to the event log for more detail information. Please contact the server administrator for assistance."
I checekd the Event log and found this error related the IIS launch process on my machine.
DCOM got error "Logon failure: unknown user name or bad password. " and was unable to logon .IWAM_Rataq in order to run the server:
where Rataq is the name of my machine. Could my IWAM_Rataq account be corrupted, my other sites on the machine work.
Infact if i put in a Test.htm page in the virtual directory MobileTest I am able to browse to the page.
Can the Account be re-set? is there another problem that I am not aware of. I have Norton Internet 2006 running could that be the reason? Could Norton be blocking the dll from loading? But the event log states it is a Account error.
Any ideas why this might occur? any help is always appreciated
View 1 Replies
View Related
Nov 25, 2007
System.Data.SqlClient.SqlError: Cannot open backup device '\.Tape0'. Operating system error 5(error not found). (Microsoft.SqlServer.express.Smo)
i have only one sql instance and tape is istalled successfully.
please help me to find solution for this error.
Thanks,
View 2 Replies
View Related
Aug 30, 2000
Hi,
On my test database I have log device size grown to 4 GB from 2 GB. Is there anyway to reduce it? I have truncate log on checkpoint option on.
I tried dbcc shrinkdatafile. Didn't help..
Any suggestions???
View 2 Replies
View Related
Jul 31, 2000
I have a Device of 6GB and a Transaction logof device of 1.5Gb , the database of the associated device had gone suspect.so i dropped the
database , now i a m trying to delete the device it says cannot delete as its in use by some database , i have checked all the
Dbs butits not associted with anything what shold i do????
Regards
View 1 Replies
View Related
Nov 26, 2000
Hi all, hope someone can give me some guidence on this.
We have a database on SQL 6.5 sp5a that is 25GB in size. The transaction log is 10GB in size. We do transaction log dumps every hour throughout the day. On a very heavy day the transaction log backup device will be just over 2GB in size. Around 8GB wasted because no-one knew how much space would be used.
Is there an easy way to resize the transaction log so we can reclaim some space. I was thinking of creating a new smaller database device, then using sp_logdevice to use the smaller device as the log and get rid of the 10GB device.
Any thoughts, ideas would be great.
Thanks
Phill
View 1 Replies
View Related
Oct 13, 2000
We have a 6.5 database that is comprised of 4 device files. As the database grows over time a new device is created for the space expansion. The last one was created on the wrong partition and the database was expanded onto it. I now need to move the device to the correct partition/directory. My question is; what is the easiest way to accomplish this move? Is it possible to move the device file and manually modify sysdevices? If so, what order of events should be followed?
View 1 Replies
View Related
Aug 6, 1998
I want to expand a log device and am having a problem. When in Edit Database Device, the `Change Now` button is disabled and the size of the device is shown as a negative number.
View 1 Replies
View Related
Sep 28, 1998
On occasion, I notice that some of my backup devices have become "offline" and the scheduled tasks associated with them will no longer run.
I get this error:
Can`t open dump device `d:MSSQLBACKUPdvbk_AFISlog.DAT`, device error or device off line. Please consult the SQL Server error log for more details. (Message 3201)
Does anyone know how to get them back online without having to create a new device? Thanks in advance...
View 1 Replies
View Related
Jun 25, 1999
hi, is there a way to find out what which database resides in which Database device.....
thanks
Ali
View 1 Replies
View Related
Dec 1, 1998
I am trying to drop a device that as no associated file in Windows NT Explorer(.dat) that shows up in my Server Manager Windows
How can I delete them?
Thanks
View 2 Replies
View Related
Jul 24, 2000
Hi,
I am trying to take a dump on to a disk with one of device A..its a transaction log dump every 15 minuter with no init and from the
same device which is connected to my standy server i am doing the load, the time diffrence is 15 minutes between standy and
production in terms of dump and load i am getting this error very frequently the device is offline the message is
"Can't open dump device 'j:ABC.DAT', device error or device off line.
Please consult the SQL Server error log for more details. (Message 3201)"
Now can this error come when the dump and load is happing at the same time tru the same device...???????
Can their be a way to control all this...??
Replies will be appreciated
View 2 Replies
View Related
Mar 5, 2001
I would like to free up some space on a SQL 6.5 server. My tempdb is on a second device (other than master) that is 500M. I don't need tempdb to be this large anymore. What would happen if I shut down SQL, renamed this device so that SQL Server wouldn't use it, and restarted SQL Server. Could I then create a new, much smaller device for tempdb? Would this work?
TIA!
JJ
View 1 Replies
View Related
Jul 12, 2001
Is there any advantage to putting the index device on a separate drive from the data & log
devices? Or is this even possible with w2k?
View 1 Replies
View Related
Feb 23, 2004
Hi all,
I want to store bakup file on the computer on netword, so make a backup device on the other computer, it ok. after that i make an full backup, there is an error : "Can not open the bakup device " .
please show me,
best regard.
View 2 Replies
View Related
Mar 15, 2004
Hi
is there a stored procedure which allows me to query if there is an existing backup device? or which gives me a listing of existing backup devices?
Thanks!
View 2 Replies
View Related
Mar 26, 2004
Hi,
request you all to clear mine one doubt that,
Can creating a backup device for sql backup reduce the backup time comparing to giving full backup path.
Cheers!!
View 1 Replies
View Related
