I'm trying to track down a thorny bug in SqlCE that just crashes randomly without any apparent correlation with anything. I was wondering if there is any diagnostic flags/TraceListener setting/debug info that I can turn on to see if I can find any patterns.
View 7 RepliesHi,
I was asked this question by someone and I didn't know the answer (hence I'm here and hoping someone else does!). They have an SQL database which is accessed via a web front end (not sure of the language) to return query results. Sometimes the queries take a long time (?) to return, whilst at other times the same query is very much faster. They have heard that it is possible to setup a query in such a way that if it takes more than a certain time to run it will generate an alert. This could then be scheduled as a job to aid diagnostics. Anyone know of a way to do this - measure the time taken to run a query and generate an alert if longer than a given time.
Thanks.
Hello all-
I installed SP2 CTP yesterday, and in the course of my testing ran one of my SSIS ETL jobs.
I routinely log to database, and have a report designed so that I can easliy monitor the job performance, errors, etc.
However, when running on SP2, there seems to be new Diagnostic entries that are logged, so much so that my 6 page report of events has now exploded into 337 pages.
I have included a sample of the entries:
19838
2:13 AM
ExternalRequest_post: 'ITransactionJoin::JoinTransaction succeeded'. The external request has completed.
Data Mart Execution Logs
User:Diagnostic
Is anyone else experiencing this? Did I miss a kb article? I have looked around, and I find nothing.
It makes the diagnostic entry unusable except in extreme troubleshooting cases.
Thanks!
BobP
I'm going to try and explain this the best I can. I am trying to pull tables from SQL Server 2000 to my Handheld Device (Dell Axim). I've installed the RDA to my web server which is running IIS 6. The RDA is installed correctly cause when I go to http://is-sql-s2/rda/sqlcesa30.dll, I get "SQL Server Mobile Server Agent 3.0." I've installed SQL Server Mobile to my handheld and setup the application but when I try to pull the tables I get an error unable to download tables.
I've gone in to check the RDA Diagnostic informaton and noticed that there is an error. Can seem to find any information about the error. Can someone help me out. THANKS!
General Information
Item
Value
Server Name
is-sql-s2
URL
/rda/sqlcesa30.dll
Authentication Type
Anonymous
Server Port
80
HTTPS
off
Server Software
Microsoft-IIS/6.0
Replication
Allowed
RDA
Allowed
Logging Level
0
Impersonation and Access Tests
Action
Status
ErrorCode
Impersonate User
SUCCESS
0x0
ReadWriteDeleteMessageFile
FAILURE
80070005
SQL Server Mobile Modules Test
Module
Status
ErrorCode
Version
SQLCERP30.DLL
SUCCESS
0x0
3.0.5214.0
SQLCESA30.DLL
SUCCESS
0x0
3.0.5214.0
Reconciler Test
Reconciler
Status
ErrorCode
9.0 Database Reconciler
SUCCESS
0x0
8.0 Database Reconciler
SUCCESS
0x0
SQL Server Module Versions
Module
Version
sqloledb.dll
2000.86.1830.0
9.0 replrec.dll
2005.90.1399.0
9.0 replprov.dll
2005.90.1399.0
9.0 msgprox.dll
2005.90.1399.0
8.0 replrec.dll
2000.80.760.0
8.0 replprov.dll
2000.80.760.0
8.0 msgprox.dll
2000.80.760.0
I want to be able to see when records have been added to a table. The issue is we have a DTS job scheduled to run every night. The developer who wrote it password protected it and doesn't work here anymore. I want to add a step to this series of DTS jobs and want to run it just prior to his job. Is there a way to see when the records are being added or when this job is being run? Thanks again, you guys are the best.
ddave
how can it be that
when I do the query
select * from rep where batch=133 it returns 730 and
select* from rep left JOIN Information ON rep.site = Information.Sitecode where batch=133 returns more then 730
I want it to return the same records as the first query but with the additional information from the information table --
what am i doing wrong?
Hello, everyone:
How to debug T-SQL codes? Can QA do that? Are there the special tools?
Thanks.
YTZ
Hi,
I need to debug my Store Procedures with diff parameters at regaular intervals which shows me memory usage, CPU usage and other usage.
Is there any way to do this?
-- Regards
Prashant Hirani
Is there a way like we do in programming or even bettre. Is there any better practice for this.
Thanks
to all the experts can u help me about my codes Truncated incorrect DOUBLE value: 'NoOfPositives'
here's my code
select
ref_region.regionName,
ref_facility.facilityName,
ref_facility.adr,
ref_facility.facilityNo,
(select count(*)
from dto_initial_screening
where (dto_initial_screening.facilityNo = ref_facility.facilityNo and
dto_initial_screening.testDt between '2007-01-01' and '2008-01-01')) as 'TotalScreened',
(select count(*)
from dto_initial_screening
where (dto_initial_screening.testResult = 'POS' and
dto_initial_screening.facilityNo = ref_facility.facilityNo and
dto_initial_screening.testDt between '2007-01-01' and '2008-01-01')) as 'NoOfPositives'
from dto_initial_screening
left join ref_facility on dto_initial_screening.facilityNo = ref_facility.facilityNo
left join ref_region on ref_facility.adrRegionCd = ref_region.regionCd
where
('NoOfPositives') < (select Cast(paramVal as UNSIGNED) from ref_param where paramCd = 'minPositives')
How to debug a sp in sql server 2005?
View 1 Replies View RelatedSee the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at HP.CUE.Video.PlaybackControl.UpdateProgressBar()
at HP.CUE.Video.PlaybackControl._ProgressTimer_Tick(Object sender, EventArgs e)
at System.Windows.Forms.Timer.OnTick(EventArgs e)
at System.Windows.Forms.Timer.Callback(IntPtr hWnd, Int32 msg, IntPtr idEvent, IntPtr dwTime)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/microsoft.net/framework/v1.1.4322/mscorlib.dll
----------------------------------------
hpqimzone
Assembly Version: 3.0.0.0
Win32 Version: 053.000.013.000
CodeBase: file:///C:/Program%20Files/HP/Digital%20Imaging/bin/hpqimzone.exe
----------------------------------------
hpqiface
Assembly Version: 4.0.0.0
Win32 Version: 053.000.013.000
CodeBase: file:///c:/windows/assembly/gac/hpqiface/4.0.0.0__a53cf5803f4c3827/hpqiface.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.windows.forms/1.0.5000.0__b77a5c561934e089/system.windows.forms.dll
----------------------------------------
System.Drawing
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.drawing/1.0.5000.0__b03f5f7f11d50a3a/system.drawing.dll
----------------------------------------
System
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
----------------------------------------
hpqcc2
Assembly Version: 3.0.0.0
Win32 Version: 053.000.013.000
CodeBase: file:///c:/windows/assembly/gac/hpqcc2/3.0.0.0__a53cf5803f4c3827/hpqcc2.dll
----------------------------------------
hpqutils
Assembly Version: 4.0.0.0
Win32 Version: 053.000.013.000
CodeBase: file:///c:/windows/assembly/gac/hpqutils/4.0.0.0__a53cf5803f4c3827/hpqutils.dll
----------------------------------------
hpqfmrsc
Assembly Version: 4.0.0.0
Win32 Version: 053.000.013.000
CodeBase: file:///c:/windows/assembly/gac/hpqfmrsc/4.0.0.0__a53cf5803f4c3827/hpqfmrsc.dll
----------------------------------------
hpqtray
Assembly Version: 4.0.0.0
Win32 Version: 053.000.013.000
CodeBase: file:///c:/windows/assembly/gac/hpqtray/4.0.0.0__a53cf5803f4c3827/hpqtray.dll
----------------------------------------
hpqovskn
Assembly Version: 3.0.0.0
Win32 Version: 053.000.013.000
CodeBase: file:///c:/windows/assembly/gac/hpqovskn/3.0.0.0__a53cf5803f4c3827/hpqovskn.dll
----------------------------------------
hpqimvlt
Assembly Version: 3.0.0.0
Win32 Version: 053.000.013.000
CodeBase: file:///c:/windows/assembly/gac/hpqimvlt/3.0.0.0__a53cf5803f4c3827/hpqimvlt.dll
----------------------------------------
hpqimgrc
Assembly Version: 4.0.0.0
Win32 Version: 053.000.013.000
CodeBase: file:///c:/windows/assembly/gac/hpqimgrc/4.0.0.0__a53cf5803f4c3827/hpqimgrc.dll
----------------------------------------
hpqntrop
Assembly Version: 4.0.0.0
Win32 Version: 053.000.013.000
CodeBase: file:///c:/windows/assembly/gac/hpqntrop/4.0.0.0__a53cf5803f4c3827/hpqntrop.dll
----------------------------------------
Interop.hpqcxm08
Assembly Version: 3.0.0.0
Win32 Version: 53.0.13.000
CodeBase: file:///c:/windows/assembly/gac/interop.hpqcxm08/3.0.0.0__a53cf5803f4c3827/interop.hpqcxm08.dll
----------------------------------------
System.Xml
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.xml/1.0.5000.0__b77a5c561934e089/system.xml.dll
----------------------------------------
LEAD
Assembly Version: 13.0.0.113
Win32 Version: 13.0.0.113
CodeBase: file:///c:/windows/assembly/gac/lead/13.0.0.113__9cf889f53ea9b907/lead.dll
----------------------------------------
LEAD.Wrapper
Assembly Version: 13.0.0.113
Win32 Version: 13.0.0.113
CodeBase: file:///c:/windows/assembly/gac/lead.wrapper/13.0.0.113__9cf889f53ea9b907/lead.wrapper.dll
----------------------------------------
LEAD.Windows.Forms
Assembly Version: 13.0.0.113
Win32 Version: 13.0.0.113
CodeBase: file:///c:/windows/assembly/gac/lead.windows.forms/13.0.0.113__9cf889f53ea9b907/lead.windows.forms.dll
----------------------------------------
LEAD.Drawing
Assembly Version: 13.0.0.113
Win32 Version: 13.0.0.113
CodeBase: file:///c:/windows/assembly/gac/lead.drawing/13.0.0.113__9cf889f53ea9b907/lead.drawing.dll
----------------------------------------
interop.hpqimgr
Assembly Version: 3.0.0.0
Win32 Version: 53.0.13.000
CodeBase: file:///c:/windows/assembly/gac/interop.hpqimgr/3.0.0.0__a53cf5803f4c3827/interop.hpqimgr.dll
----------------------------------------
hpqthumb
Assembly Version: 3.0.0.0
Win32 Version: 053.000.013.000
CodeBase: file:///c:/windows/assembly/gac/hpqthumb/3.0.0.0__a53cf5803f4c3827/hpqthumb.dll
----------------------------------------
hpqasset
Assembly Version: 4.0.0.0
Win32 Version: 053.000.013.000
CodeBase: file:///c:/windows/assembly/gac/hpqasset/4.0.0.0__a53cf5803f4c3827/hpqasset.dll
----------------------------------------
hpqmirsc
Assembly Version: 3.0.0.0
Win32 Version: 053.000.013.000
CodeBase: file:///C:/Program%20Files/HP/Digital%20Imaging/bin/hpqmirsc.DLL
----------------------------------------
hpqedit
Assembly Version: 3.0.0.0
Win32 Version: 053.000.013.000
CodeBase: file:///c:/windows/assembly/gac/hpqedit/3.0.0.0__a53cf5803f4c3827/hpqedit.dll
----------------------------------------
hpqvideo
Assembly Version: 3.0.0.0
Win32 Version: 053.000.013.000
CodeBase: file:///c:/windows/assembly/gac/hpqvideo/3.0.0.0__a53cf5803f4c3827/hpqvideo.dll
----------------------------------------
LEAD.Windows.Forms.DrawingContainer
Assembly Version: 13.0.0.113
Win32 Version: 13.0.0.113
CodeBase: file:///c:/windows/assembly/gac/lead.windows.forms.drawingcontainer/13.0.0.113__9cf889f53ea9b907/lead.windows.forms.drawingcontainer.dll
----------------------------------------
hpqmdmr
Assembly Version: 4.0.0.0
Win32 Version: 053.000.013.000
CodeBase: file:///c:/windows/assembly/gac/hpqmdmr/4.0.0.0__a53cf5803f4c3827/hpqmdmr.dll
----------------------------------------
LEAD.Drawing.Imaging.ImageProcessing
Assembly Version: 13.0.0.113
Win32 Version: 13.0.0.113
CodeBase: file:///c:/windows/assembly/gac/lead.drawing.imaging.imageprocessing/13.0.0.113__9cf889f53ea9b907/lead.drawing.imaging.imageprocessing.dll
----------------------------------------
hpqimlib
Assembly Version: 3.0.0.0
Win32 Version: 053.000.013.000
CodeBase: file:///c:/windows/assembly/gac/hpqimlib/3.0.0.0__a53cf5803f4c3827/hpqimlib.dll
----------------------------------------
hpqglutl
Assembly Version: 4.0.0.0
Win32 Version: 053.000.013.000
CodeBase: file:///c:/windows/assembly/gac/hpqglutl/4.0.0.0__a53cf5803f4c3827/hpqglutl.dll
----------------------------------------
Interop.hpqvideo
Assembly Version: 3.0.0.0
Win32 Version: 53.0.13.000
CodeBase: file:///c:/windows/assembly/gac/interop.hpqvideo/3.0.0.0__a53cf5803f4c3827/interop.hpqvideo.dll
----------------------------------------
************** JIT Debugging **************
To enable just in time (JIT) debugging, the config file for this
application or machine (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the machine
rather than being handled by this dialog.
Hello guys!
I am trying to debug a sql procedure inside Server Explorer but I can seem to step into each line.
When I run the procedure it doesn't stop in the breakpoint I set.
By the way I am running in a client pc..
Please help guys!
How to test @au_lname's value sends to the following following sql command?
Dim MyCommand As New SqlCommand("UPDATE [authors] SET [au_lname] = @au_lname", MyConnection)MyCommand.Parameters.Add(New SqlParameter("@au_lname", SqlDbType.NVarChar)).Value = me.au_lname.text
I tried to print the "MyCommand.CommandText.ToString" but only get UPDATE [authors] SET [au_lname] = @au_lname with no value in the command text.
Thanks!
Hi;
I want to load 36k records into a SQL table from a text file.
The VBscript that I am using loads 6K records before encountering a problem with
the transfromation.
I have tried using msgBox but this is no way to deal with 30K worth of records.
Could I run a SELECT to start in a table at 6K records and return a 100 at a time ?
--
Thanks
hi,
Do we have any way to debug the SP in sql server 2005, the way it was in sql server 2000 (Query Analyser)
Thanks,
Rahul Jha
Hello gurus,
Our SQL Servers is giving us a headache, after a certain period in time, either SQL Service automatically shuts down by itself or hangs. I've opened the logs and found hex dumps. Can you help me out with these?
2007-07-08 04:04:35.20 spid53 SqlDumpExceptionHandler: Process 1760 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
* ************************************************** *****************************
*
* BEGIN STACK DUMP:
* 07/08/07 04:04:35 spid 53
*
* Exception Address = 0042D46D
* Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION
* Access Violation occurred reading address 6AF1EDF0
* Input Buffer 4088 bytes -
* USE Document DBCC DBREINDEX (dtproperties) DBCC DBREINDEX (REfID_DocID
* ) DBCC DBREINDEX (RF_UNISYS_ErrorCodes) DBCC DBREINDEX (SYS_Document_F
* lat_Meta_Data) DBCC DBREINDEX (SYS_Document_Meta_Data) DBCC DBREINDEX
* (SYS_Document_Meta_Detail) DBCC DBREINDEX (SYS_Documents) DBCC DBREIND
* EX (SYS_ETFuelType) DBCC DBREINDEX (SYS_ETStatus) DBCC DBREINDEX (SYS_
* HF_Document_Meta_Data) DBCC DBREINDEX (SYS_HF_MI_Emission_Results) DBC
* C DBREINDEX (SYS_ITP_Failed) DBCC DBREINDEX (SYS_MI_Emission_Results)
* DBCC DBREINDEX (SYS_RF_Document_Meta_Data) DBCC DBREINDEX (SYS_RF_Docum
* ent_Status) DBCC DBREINDEX (SYS_TR_Document) DBCC DBREINDEX (SYS_TR_SM
* S_Document) USE Industry DBCC DBREINDEX (dtproperties) DBCC DBREIND
* EX (IND_MF_Industry) DBCC DBREINDEX (RF_ErrorCodes) DBCC DBREINDEX (RF
* _OperationCodes) DBCC DBREINDEX (RF_Unisys_ErrCodes) DBCC DBREINDEX (S
* YS_Admin_Has_Agents) DBCC DBREINDEX (SYS_Admin_Sharing) DBCC DBREINDEX
* (SYS_Companies) DBCC DBREINDEX (SYS_Company_Has_Admins) DBCC DBREINDE
* X (SYS_Company_Meta_Data) DBCC DBREINDEX (SYS_HF_Admin_Has_Agents) DBC
* C DBREINDEX (SYS_HF_Companies) DBCC DBREINDEX (SYS_HF_Company_Has_Admin
* s) DBCC DBREINDEX (SYS_HF_Company_Meta_Data) DBCC DBREINDEX (SYS_HF_Us
* er_Meta_Data) DBCC DBREINDEX (SYS_HF_Users) DBCC DBREINDEX (SYS_MF_App
* Variables) DBCC DBREINDEX (SYS_MI_Token) DBCC DBREINDEX (SYS_Page_Acce
* ss) DBCC DBREINDEX (SYS_Pages) DBCC DBREINDEX (SYS_Password_History)
* DBCC DBREINDEX (SYS_RF_Announcement) DBCC DBREINDEX (SYS_RF_BodyType)
* DBCC DBREINDEX (SYS_RF_Color) DBCC DBREINDEX (SYS_RF_Company_Meta_Data)
* DBCC DBREINDEX (SYS_RF_Company_Status) DBCC DBREINDEX (SYS_RF_DieselT
* ype) DBCC DBREINDEX (SYS_RF_EmissionFees) DBCC DBREINDEX (SYS_RF_Emiss
* ionRules) DBCC DBREINDEX (SYS_RF_Fuel_Type) DBCC DBREINDEX (SYS_RF_Hel
* pDetails) DBCC DBREINDEX (Sys_RF_Make) DBCC DBREINDEX (SYS_RF_Month)
* DBCC DBREINDEX (SYS_RF_MVClassification) DBCC DBREINDEX (SYS_RF_MVType)
* DBCC DBREINDEX (SYS_RF_MVType2) DBCC DBREINDEX (SYS_RF_Page_Groups)
* DBCC DBREINDEX (SYS_RF_Purpo
*
*
* MODULE BASE END SIZE
* sqlservr 00400000 00CBAFFF 008bb000
* Invalid Address 77F80000 77FFBFFF 0007c000
... <snipped>
* xpstar 09240000 09248FFF 00009000
* rsabase 092D0000 092F2FFF 00023000
* dbghelp 0AA80000 0AB7FFFF 00100000
*
* Edi: 0AA53937: 00000000 00000000 00000000 84004A00 98018901 C501B101
* Esi: 6AF1EDF0:
* Eax: 00000878:
* Ebx: FFFFE000:
* Ecx: 3FFFF800:
* Edx: FFFFE000:
* Eip: 0042D46D: CA8BA5F3 F303E183 DC7D8BA4 83D045FF 4D8B2CC7 E9D233E0
* Ebp: 0A1BFCC0: 0A1BFCE4 0042D5CD 71E428CC 71E40570 71E40988 0AA519A0
* SegCs: 0000001B:
* EFlags: 00010206: 00530053 0052004F 003D0053 00000034 0053004F 0057003D
* Esp: 0A1BFC28: 0AA519A0 71E4052C 00000000 00000010 71E408A0 00000010
* SegSs: 00000023:
* ************************************************** *****************************
* -------------------------------------------------------------------------------
* Short Stack Dump
* 0042D46D Module(sqlservr+0002D46D)
* 0042D5CD Module(sqlservr+0002D5CD)
* 0042D6C7 Module(sqlservr+0002D6C7)
* 00508750 Module(sqlservr+00108750)
* 0051EB18 Module(sqlservr+0011EB18)
* 0051E9E4 Module(sqlservr+0011E9E4)
* 0085EACA Module(sqlservr+0045EACA) (GetIMallocForMsxml+0006A08A)
* 004229A7 Module(sqlservr+000229A7)
* 0087B87B Module(sqlservr+0047B87B) (GetIMallocForMsxml+00086E3B)
* 0087E3C9 Module(sqlservr+0047E3C9) (GetIMallocForMsxml+00089989)
* 0059A449 Module(sqlservr+0019A449)
* 41075309 Module(ums+00005309) (ProcessWorkRequests+000002D9 Line 456+00000000)
* 41074978 Module(ums+00004978) (ThreadStartRoutine+00000098 Line 263+00000007)
* 7C34940F Module(MSVCR71+0000940F) (endthread+000000AA)
* 7C57B3BC Module(KERNEL32+0000B3BC) (lstrcmpiW+000000B7)
* -------------------------------------------------------------------------------
*Dump thread - spid = 53, PSS = 0x55a35280, EC = 0x55a355b0
*Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQLlogSQLDump0020.txt
*** Problems occur intermittently, sometimes after our full backup which occurs every 0000h, sometimes 30 minutes after our transaction log dumps.
Please advice me on my next step. Thanks
alter PROCEDURE [dbo].[spsite]
@fromdate datetime,
@todate datetime
AS
BEGIN
select site as sitecode,
count(id) as t from an where mydate >=@fromdate and mydate<=@todate,
count(id) as p from an where p=1 and mydatestage1 >=@fromdate and mydatestage1<=@todate
group by site
what am i doing wrong?
I get incorrect syntax near ,
I know there's a trick to this, that I can't figure out.
Have an SSIS package that I developed and deployed/saved(?) to a file on the SSIS server. Now I need to change the data flows. Did that, no issues, lets me resave the file, but I can't debug or execute the package so I can test what I did is right? Why is the debug drop down box greyed out? There's gotta be something I'm missing here.
THanks,
Lezza
Who can help me?
I defined project properties:
Start action--start external program : dtexec
Action options--command line arguments: /f ***.dtsx (using component which i debug)
Configuration: active(debug)
I specified breakpoint
after clicking build,dtexec can popup but then generate error:
The following modle was built either with optimizations enabled or without debug information
C:winntassemblyGAC_MSIL******.dll
To debug this module,change it's project configuration to debug mode.
I have no idea about this,and i can find my dll file in C:winntassembly,but no GAC_MSIL folder
Who can help me? Thanks in advance
Can someone help me with debugging store proc. I am usig VS 2003 and SQL Server 2005 and I have no clue as how to do that if it is possible. I would like to place a break point in my store proc if that is possible. I know if I was in VS 2005 it would be a charm but it's not my case.
Thanks
hello,I want to know if it is possible to debug a stored procedure using visual studio 2003 and SQL server 2000.if yes can u help me how to do this?Thanks.
View 5 Replies View RelatedSay I have this query in my stored procedure. The problem I am facing is @OrgUID contains no value, so I put these 2 lines to debug. Am I using the right way to debug? I couldn't see the value of @OrgUID using this way. OrgUID is the PK in Organization. INSERT INTO Organization (OrgName) VALUES (@DealerName)SELECT @OrgUID = @@IDENTITYprint @OrgUIDreturn
View 4 Replies View RelatedHi,I am using SQL Server Express bundled with Visual Studio 2008 on top of a ASP.NET/C# web application.I have written a stored procedure that appears to behave differently when stepping into the procedure than it does when called from my application, even though the parameter values are apparently identical. I need to debug the parameter values from within the stored procedure itself to see what the difference is. But how can I debug the stored procedure when it is called from the application?I followed the instructions at this page, but VS2008 does not stop within the procedure as expected. It seems I foolishly downloaded VS2008 Professional Edition, so these instructions apparently do not apply to that version (!!).So I thought I would try debugging the parameter values by writing them to a file. I used the procedure on this page to write to an arbitrary file, but every time I try to call it I get the following error: Error: SQL Server blocked access to procedure 'sys.sp_OACreate' of
component 'Ole Automation Procedures' because this component is turned
off as part of the security configuration for this server. A
system administrator can enable the use of 'Ole Automation Procedures'
by using sp_configure. For more information about enabling 'Ole
Automation Procedures', see "Surface Area Configuration" in SQL Server
Books Online. I opened the SQL Server Surface Area Configuration and enabled the "OLE Automation". I restarted the SQL Server service and VS2008, but I still got the same error, even though "OLE Automation" remains enabled for SQL Server 2005. So I tried issuing the following commands: sp_configure 'show advanced options', 1; GO RECONFIGURE;GOsp_configure 'Ole Automation Procedures', 1; GO RECONFIGURE;GO But if I issue those commands from within a stored procedure, or even an SQL Query window, I get the following error:SQL Execution Error:Executed SQL Statement: sp_configure 'show advanced options', 1; GO RECONFIGURE;GOsp_configure 'Ole Automation Procedures', 1; GO RECONFIGURE;GOError Source: .Net SqlClient Data ProviderError Message: Incorrect syntax near 'GO'.Please - I can't be the only person who is unable to debug his stored procedures. How can I either enable Application Debugging, or enable "OLE Automation"?I appreciate any help you can offer!
If I right-click on a stored procedure, I get the option to "step into
stored procedure". However, no little yellow arrow appears that would
show which line it's on. Debug/Continue is grayed out. Any ideas?
NOTE: I tried to do this in SQL Query Analyzer. Same thing. Just seems like nothing is happening.
Hello,
Can you debug code for a script transformation in BIDS?Thanks.
I created a stored procedure that is referenced by a SQLDataSource
& DetailView on a web page. I tested the stored procedure in Query
Analyzer & everyting looks good.
When I get to the page to display the detailview, nothing is displayed.
I ran SQL Profiler, to see what was happening & the stored
procedure isn't being called.
I checked & rechecked the references to the SQLDataSource & even tested them in the configuration wizard.
I replaced the stored procedure with the query & it worked, except I had to 'hardcode' the variable values.
The stored procedure does return error results when they occur - how can I intercept them?
How can I determine what is happening with this stored procedure? Is there a way to trace it other than with SQL Profiler?
Thanks in advance.
OldSam
Hi Friends, I have a worst doubt, plese excuse me. and help me to find solution for my doubt.
How can i Debug my Sql Stored procedure. and where to do this.
how to debug store procedure from Visual interdev. I am working on Windows NT 4.0 workstation, and SQL database server is on an other Windows NT server machine. I can not step through the store procedure or set breakpoint.
Thanks in advanced.
YU
Debugging Stored Procedure
hi ...
How to debug a stored procedure line by line.
As i know there is one method of debugging the stored procedure by rightclicking on stored procedure in ObjectBrowser and click Debug. But it is not working properly .
Is there any other ways/methods of debugging a stored procedure
Does anybody know how to debug stored procedure ,
especially big stored procedure with cursor?
Any existing tools? I'v heard it's easy in SQL Server 7
but we don't have it.
Please, any advice will be very appreciated.
Thanks.
I've seen on a few searches (obviously not dBforums searches :( ) that sometimes other folks are running into this, but I haven't yet seen an answer to it anywhere...so, how 'bouts our brainy folks consider it for a brief moment?
I'd 'preciate it immensely...
Trouble is, I cannot get any of my stored procs to run in debug mode through the SQL Query Analyzer. I have done this on many occasions before, but am unable to debug ANY sp's today.
Interesting thing is, that I initially named all my stored procs as "sp_<procname>" but since I read that is a no-no (since sp_ procs are assumed to be system stored procs, and the master db will be searched first at execution time - slowing things down a tad), I today changed all my procs to <procname> simply getting rid of the sp_ on each proc name.
I did this by first renaming the proc in Enterprise manager, then going into the proc (also in enterprise manager) and changing the proc name in the CREATE PROC statement (and, of course, changed all the references to other stored procs fro sp_<procname> to <procname>). then saving the proc in Enterprise Manager.
After investigating the problem further, I tried deleting the proc in EManager, then went to SQL Server and recreating it (both by scripting the proc and running it in SQL Query Analyzer AND just deleting and re-adding (as "add new proc" in EManager.
No effect.
Still can't debug. When I go into the debugger, it allows me to set up my params as usual, but then when I go to execute, it doesn't stop even at the first line of the proc...it just commences to rip through the procs and runs to the end (runs successfully, I might add...but provides no way to view the progress!!!)
Any thoughts? I know it's gotta be setup or something...but just can't figger it out.
Dear Sir,
I am from ASP.NET back ground now I am working in SQL Server 2005. I want to debug my stored procedure after coding end. In SQL 2000 there is an option of debug right click on the stored procedure but No such option present in SQL Server 2005 so I am unable to debug my Stored Procedure when any error occur.
Can you please guide me?
Regards
Sandeep Mishra
Bangalore
Have A Nice Day...!!!