DialogError Message Type

Jan 10, 2007

Hi There

In my testing i have seen the following i just would like confirmation that i am correct.

When something happens to cause a Dialog Error say for example message validation fails.

I have noticed that the actual DialogError message always goes to the initiator queue, is this correct ?

If so then logic to handle the ErrorDialog message type only has to be in the initiator activated SP that logic is not required in the target queue activated SP since the ErrorDialog message always goes to the initiator queue, is that correct ?

Thanx

View 1 Replies

Message Type And Message Body..............

Nov 17, 2006

Hello,

I am having trouble specifying a message body that is valid. I mean for the client to send. If I leave it as null then everything is ok but if I create a memorystream and add a line of text it reports back it did not pass validation. I do not understand this and am not sure what to do. I need to send a message based on a code and text but do not know the format of the body that is allowed. The code I am refering to comes out of HelloWord_CLR because that is what I am formating my sample after. I call it the same way it calls the return message done in ServiceProc. I need to know the message format including body since this does not seem to work. A sample of the call is bellow.

// Create an empty request message

string Msg = "Hello";

MemoryStream body = new MemoryStream(Encoding.ASCII.GetBytes(Msg));

Message request = new Message("Request", body);

Thanks,

Scott Allison...

View 1 Replies View Related

Analysis :: Invalid Column Name Message Type Error

May 21, 2015

I'm having trouble with cube processing. While processing a code I'm getting a "Invalid column name MessageType" error.

I unfolded the cube, then I opened "measure groups", my failing dimension (ServiceRequestDim) and the partition.

In the partition I opened the "Source" attribute so it now includes my column which was missing. But it didn't solve the issue.

If I get the query used during the process I'm getting this :

SELECT
DISTINCT
[ServiceRequestDim].[MessageType] AS [ServiceRequestDimMessageType0_0]
FROM
(
Select IsNull(IsDeleted, 0) as IsDeleted, [ServiceRequestDimKey], IsNull([Status_ServiceRequestStatusId], 0) as [Status_ServiceRequestStatusId],[Status],IsNull([TemplateId_ServiceRequestTemplateId], 0) as

[Code] ....

In the nested query which defines ServiceRequestDim the messagetype attribute is still missing. In my source datamart the ServiceRequestDim has the "MessageType" column.

So the question is where do I change the nested request that the dim process use to reflect the actual columns in my datamart .

View 4 Replies View Related

Message Make Sure The Application For The Project Type (.rptproj) Is Installed.

Oct 3, 2007

Hi,
We are running :
- Visual Studio 2005 Team Edition for Software Developers
- SQL Server 2005 Express (SQLEXPR32.EXE)
Installed :
- SQL Server with Advanced Services (SQLEXPR_ADV.EXE) incl. Reporting Services
- SQL Server Toolkit (SQLEXPR_TOOLKIT.EXE)

We have a VS Solution with a Reporting Project

When opening Visual Studio, the following message appears :

"Make sure the application for the project type (.rptproj) is installed."

I have no idea why this message appears.

Is this a known problem/bug ? Anybody any idea how I can solve this ?

Many thanks in advance.

Vincent

View 2 Replies View Related

Send Mail Task Message Source Type Variable

Jun 13, 2007

hi

I am trying something very simple but cannot see why it is failing.

I am trying to add a filename to the message source of a mail task from a variable.

I have Variable 1 User::CurrentFilePath, Scope = ForEachLoop, Data Type = String

and Variable 2 User::mailSource, Scope = ForEachLoop, Data Type = String

Variable 2 EvaluateAsExpression is set to True and the Expression for now is simply "Processing of File " + [User::CurrentFilePath] + "has Begun"

However when i enter this i get

The expression for variable "Test2" failed evaluation. There was an error in the expression.

In the Value and Value type boxes of the variable property.

Any advice greatly received

Regards

Scott

View 1 Replies View Related

Message : Make Sure The Application For The Project Type (.rptproj) Is Installed.

Oct 3, 2007

View 1 Replies View Related

Error Message Conversion Failed When Converting The Nvarchar Value To Data Type Int??

Jan 19, 2007

Hi,

I can't seem to fix the following error in my stored procedure.

Error Message: Conversion failed when converting the nvarchar value '1007-001' to data type int.

The line of code in my stored procedure that seems to be the problem is the following:

CASE WHEN [Order Details].[Job No] IS NULL THEN [Orders].[Order No] ELSE [Order Details].[Job No] END

Order No has a data type of INT and Job No has a data type NVARCHAR(8). In the above case statement i'm not trying to convert anything but just display a column depending on the out come of the case statement. If anyone knows how to get around this error you help would be very welcome.

View 2 Replies View Related

T-SQL (SS2K8) :: Arithmetic Overflow Error Converting Varchar To Data Type Numeric Message When Field Is Decimal

Apr 3, 2014

I am trying to setup an indicator value for an SSRS report to show green and red values on a report, based on the NRESULT value. The problem I am facing is that I have several different CASE statements that have the same logic, and they are processing just fine. NRESULT is a decimal field, so no conversion should be necessary. I do not know why I am getting the "Arithmetic overflow error converting varchar to data type numeric." error message.

Below is the CASE statement where the error is occurring. It is in the part of the ELSE CASE. The first CASE works just fine when the ELSE CASE is commented out. If I also change the ELSE CASE statement to say "else case when LEFT(NRESULT,1) = '-' then '0'", then it processes fine, too, so it has to be something I am missing something in the check on negative values. I do need the two checks, one for positive and one for negative values, to take place.

case when LEFT(NRESULT,1) <> '-' then --This portion, for checking positive values, of the CASE statement works fine.
CASE WHEN LEFT(ROUND(NRESULT,2),4) between 0.00 and 0.49 THEN '2' --Green
ELSE CASE WHEN LEFT(ROUND(NRESULT,2),4) > 0.49 THEN '0' --Red
ELSE '3' --White
END
END
else case when LEFT(NRESULT,1) = '-' then --This portion, for checking negative values, of the CASE statement is producing the conversion error message.

[code]....

I checked the NRESULT field, and there are not any NULL values in there, either.

View 1 Replies View Related

Can't Find Or Load Message DLL. Message DLL Must Be In Path Or In Current Directory.

Jul 23, 2007

In my SQL Server, I see the below message in the Application Event Viewer

"18265 :

Log backed up: Database: HSD, creation date(time): 2007/01/06(05:05:05), first LSN: 1439:495055:1, last LSN: 1439:496675:1, number of dump devices: 1, device information: (FILE=1, TYPE=DISK: {'D:MSSQLBACKUPHSDHSD_tlog_200707141300.TRN'})."

When I save the application event viewer and open it in another server, I do not see the above message, instead I get the following message:

" Can't find or load message DLL. Message DLL must be in path or in current directory."

Any thoughts to overcome this problem is appreciated.

Thanks

Santhosh

View 3 Replies View Related

This Message Could Not Be Delivered Because Its Message Timestamp Has Expired Or Is Invalid

Aug 8, 2007

I run SB between 2 SQL servers. In profiler on an initiator side I see next error: 'This message could not be delivered because its message timestamp has expired or is invalid'. For the conversation we use best practice, i.e. target closes a conversation. Target side succeed to close conversation, but initiator still stay in DO (disconnect_outbound).
What is a reasone for the error? What to do?

View 5 Replies View Related

This Message Could Not Be Delivered Because Its Message Timestamp Has Expired Or Is Invalid.

Aug 8, 2007

I see in profiler this error: "This message could not be delivered because its message timestamp has expired or is invalid"
What is a reason for error?

View 1 Replies View Related

'((System.Exception)($exception)).Message' Threw An Exception Of Type 'System.NotSupportedException'

Jan 16, 2008

Greetings everyone, I am attempting to build my first application using Microsofts Sql databases. It is a Windows Mobile application so I am using Sql Server Compact 3.5 with Visual Studio 2008 Beta 2. When I try and insert a new row into one of my tables, the app throws the error message shown in the title of this topic.
'((System.Exception)($exception)).Message' threw an exception of type 'System.NotSupportedException'

My table has 4 columns (i have since changed my FavoriteAccount datatype from bit to Integer)
http://i85.photobucket.com/albums/k71/Scionwest/table.jpg

Account type will either be "Checking" or "Savings" when a new row is added, the user will select what they want from a combo box.

Next is a snap shot of my startup form.
http://i85.photobucket.com/albums/k71/Scionwest/form.jpg

Where it says "Favorite Account: None" in the top panel, I am using a link label. When a user clicks "None" it will go to a account creation wizard, and set the first account as it's primary/favorite. As more accounts are added the user can select which will be his/her primary/favorite. For now I am just creating a sample account when the label is clicked in an attempt to get something working. Below is the code used.

private void lnkFavoriteAccount_Click(object sender, EventArgs e)

{

FinancesDataSet.BankAccountRow account = this.financesDataSet.BankAccount.NewBankAccountRow();

account.Name = "MyBank Checking Account";

account.AccountType = "Checking";

account.Balance = Convert.ToDecimal("15.03");

account.FavoriteAccount = 1;//datatype is an integer, I have changed it since I took the screenshot.

financesDataSet.BankAccount.Rows.Add(account);
//The next three lines where added while I was trying to get this to work.
//I don't know if I really need them or not, I receive the error regardless if these are here or not.

this.bankAccountTableAdapter1.Update(financesDataSet);

this.financesDataSet.AcceptChanges();

refreshDatabase();

}

the refreshDatabase() code is here:

private void refreshDatabase()

{

this.bankAccountTableAdapter1.Fill(this.financesDataSet.BankAccount);

//Aquire a count of accounts the user has

int numAccounts = financesDataSet.BankAccount.Count;

//Loop through each account and see which one is the primary.

for (int num = 0; num != numAccounts; num++)

{
//Works ok in frmMain_Load, but when my lnkFavoriteAccount_click calls this, it throws the error.

if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)

{
//Display the primary account on our home page. User can click the link label & be taken to their account register.

this.lnkFavoriteAccount.Text = this.financesDataSet.BankAccount[num].Name.ToString();

this.lnkFavoriteFunds.Text = this.financesDataSet.BankAccount[num].Balance.ToString();

break;

}

}

}

and my form_load code

private void frmMain_Load(object sender, EventArgs e)

{

refreshDatabase();

}

So, when I click on the lnkFavoriteAccount label, and my new row gets added, the app stops at the following line in my DataSet.Designer

[global:ystem.Diagnostics.DebuggerNonUserCodeAttribute()]

public byte FavoriteAccount {

get {

try {

return ((byte)(this[this.tableBankAccount.FavoriteAccountColumn]));

}

catch (global:ystem.InvalidCastException e) {
//Stops at the following line, this error was caused by 'if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)'

throw new global:ystem.Data.StrongTypingException("The value for column 'FavoriteAccount' in table 'BankAccount' is DBNull.", e);

}

}

set {

this[this.tableBankAccount.FavoriteAccountColumn] = value;

}

}

I have no idea what I am doing wrong, all of the code I used I retreived from Microsofts help documentation included with VS2008. I have tried used my TableAdapter.Insert() method and it still failed when it got to

if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)

in my refreshDatabase() method it still failed.

When I look, the data has been added into the database, it's just when I try to retreive it now, it bails on me. Am I retreiving the information wrong?

Thanks for any help you guys can offer.

Johnathon

View 1 Replies View Related

Incorrect Syntax Near 'm'. An Expression Of Non-boolean Type Specified In A Context Where A Condition Is Expected, Near 'type'

Jun 3, 2008

This is nutty. I never got this error on my local machine. The only lower case m in the sql is by near the variable Ratingsum like in line 59.
[SqlException (0x80131904): Incorrect syntax near 'm'.An expression of non-boolean type specified in a context where a condition is expected, near 'type'.] System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +925466 System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800118 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1932 System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) +196 System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +269 System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +135 view_full_article.btnRating_Click(Object Src, EventArgs E) +565 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1746</pre></code>
Here is my button click sub in its entirety:
1 Sub btnRating_Click(ByVal Src As Object, ByVal E As EventArgs)
2 'Variable declarations...
3 Dim articleid As Integer
4 articleid = Request.QueryString("aid")
5 Dim strSelectQuery, strInsertQuery As String
6 Dim strCon As String
7 Dim conMyConnection As New System.Data.SqlClient.SqlConnection()
8 Dim cmdMyCommand As New System.Data.SqlClient.SqlCommand()
9 Dim dtrMyDataReader As System.Data.SqlClient.SqlDataReader
10 Dim MyHttpAppObject As System.Web.HttpContext = _
11 System.Web.HttpContext.Current
12 Dim strRemoteAddress As String
13 Dim intSelectedRating, intCount As Integer
14 Dim Ratingvalues As Decimal
15 Dim Ratingnums As Decimal
16 Dim Stars As Decimal
17 Dim Comments As String
18 Dim active As Boolean = False
19 Me.lblRating.Text = ""
20 'Get the user's ip address and cast its type to string...
21 strRemoteAddress = CStr(MyHttpAppObject.Request.UserHostAddress)
22 'Build the query string. This time check to see if IP address has already rated this ID.
23 strSelectQuery = "SELECT COUNT(*) As RatingCount "
24 strSelectQuery += "FROM tblArticleRating WHERE Itemid=" & articleid
25 strSelectQuery += " AND ip = '" & strRemoteAddress & "'"
26 'Open the connection, and execute the query...
27 strCon = System.Web.Configuration.WebConfigurationManager.ConnectionStrings("sqlConnectionString").ConnectionString
28 conMyConnection.ConnectionString = strCon
29 conMyConnection.Open()
30 cmdMyCommand.Connection = conMyConnection
31 cmdMyCommand.CommandType = System.Data.CommandType.Text
32 cmdMyCommand.CommandText = strSelectQuery
33 intCount = cmdMyCommand.ExecuteScalar()
34 intSelectedRating = Int(Me.rbRating.Text)
35 conMyConnection.Close()
36 'Close the connection to release these resources...
37
38 If intCount = 0 Then 'The user hasn't rated the article
39 'before, so perform the insert...
40 strInsertQuery = "INSERT INTO tblArticleRating (rating, ip, itemID, comment, active) "
41 strInsertQuery += "VALUES ("
42 strInsertQuery += intSelectedRating & ", '"
43 strInsertQuery += strRemoteAddress & "', "
44 strInsertQuery += articleid & ", '"
45 strInsertQuery += comment.Text & "', '"
46 strInsertQuery += active & "'); "
47 cmdMyCommand.CommandText = strInsertQuery
48 conMyConnection.Open()
49 cmdMyCommand.ExecuteNonQuery()
50 conMyConnection.Close()
51 Me.lblRating.Text = "Thanks for your vote!"
52 Comments = comment.Text.ToString
53
54 If Len(Comments) > 0 Then
55 emailadmin(comment.Text, articleid)
56 End If
57 'now update the article db for the two values but first get the correct ratings for the article
58 strSelectQuery = _
59 "SELECT SUM(rating) As RatingSum, COUNT(*) As RatingCount "
60 strSelectQuery += "FROM tblArticleRating WHERE Itemid=" & articleid
61 conMyConnection.Open()
62 cmdMyCommand.CommandText = strSelectQuery
63 dtrMyDataReader = cmdMyCommand.ExecuteReader()
64 dtrMyDataReader.Read()
65 Ratingvalues = Convert.ToDecimal(dtrMyDataReader("RatingSum").ToString)
66 Ratingnums = Convert.ToDecimal(dtrMyDataReader("RatingCount").ToString)
67 Stars = Ratingvalues / Ratingnums
68 conMyConnection.Close()
69 'Response.Write("Values: " & Ratingvalues)
70 'Response.Write("Votes: " & Ratingnums)
71
72 UpdateRating(articleid, Stars, Ratingnums)
73 Else 'The user has rated the article before, so display a message...
74 Me.lblRating.Text = "You've already rated this article"
75 End If
76 strSelectQuery = _
77 "SELECT SUM(rating) As RatingSum, COUNT(*) As RatingCount "
78 strSelectQuery += "FROM tblArticleRating WHERE Itemid=" & articleid
79 conMyConnection.Open()
80 cmdMyCommand.CommandText = strSelectQuery
81 dtrMyDataReader = cmdMyCommand.ExecuteReader()
82 dtrMyDataReader.Read()
83 Ratingvalues = Convert.ToDecimal(dtrMyDataReader("RatingSum").ToString)
84 Ratingnums = Convert.ToDecimal(dtrMyDataReader("RatingCount").ToString)
85 Stars = Ratingvalues / Ratingnums
86 If (Ratingnums = 1) And (Stars <= 1) Then
87 lblRatingCount.Text =" (" & (String.Format("{0:f2}", Stars)) & ") / " & dtrMyDataReader("RatingCount") & " Vote"
88 ElseIf (Ratingnums = 1) And (Stars > 1) Then
89 lblRatingCount.Text = " (" & (String.Format("{0:f2}", Stars)) & ") / " & dtrMyDataReader("RatingCount") & " Vote"
90 ElseIf (Ratingnums > 1) And (Stars <= 1) Then
91 lblRatingCount.Text =" (" & (String.Format("{0:f2}", Stars)) & ") / " & dtrMyDataReader("RatingCount") & " Votes"
92 ElseIf (Ratingnums > 1) And (Stars > 1) Then
93 lblRatingCount.Text = " (" & (String.Format("{0:f2}", Stars)) & ") / " & dtrMyDataReader("RatingCount") & " Votes"
94 End If
95
96 'Response.Write(String.Format("{0:f2}", Stars))
97 'Response.Write("Values: " & Ratingvalues)
98 'Response.Write("Votes: " & Ratingnums)
99 If (Stars > 0) And (Stars <= 0.5) Then
100 Me.Rating.ImageUrl ="./images/rating/05star.gif"
101 ElseIf (Stars > 0.5) And (Stars < 1.0) Then
102 Me.Rating.ImageUrl = "./images/rating/05star.gif"
103 ElseIf (Stars >= 1.0) And (Stars < 1.5) Then
104 Me.Rating.ImageUrl = "./images/rating/1star.gif"
105 ElseIf (Stars >= 1.5) And (Stars < 2.0) Then
106 Me.Rating.ImageUrl = "./images/rating/15star.gif"
107 ElseIf (Stars >= 2.0) And (Stars < 2.5) Then
108 Me.Rating.ImageUrl = "./images/rating/2star.gif"
109 ElseIf (Stars >= 2.5) And (Stars < 3.0) Then
110 Me.Rating.ImageUrl = "./images/rating/25star.gif"
111 ElseIf (Stars >= 3.0) And (Stars < 3.5) Then
112 Me.Rating.ImageUrl = "./images/rating/3star.gif"
113 ElseIf (Stars >= 3.5) And (Stars < 4.0) Then
114 Me.Rating.ImageUrl = "./images/rating/35star.gif"
115 ElseIf (Stars >= 4.0) And (Stars < 4.5) Then
116 Me.Rating.ImageUrl = "./images/rating/4star.gif"
117 ElseIf (Stars >= 4.5) And (Stars < 5.0) Then
118 Me.Rating.ImageUrl = "./images/rating/45star.gif"
119 ElseIf (Stars >= 4.5) And (Stars <= 5.0) Then
120 Me.Rating.ImageUrl = "./images/rating/5star.gif"
121 End If
122 dtrMyDataReader.Close()
123 conMyConnection.Close()
124 End Sub

If you want to reduplicate the error, click over here and try to submit a rating:
http://www.link-exchangers.com/view_full_article.aspx?aid=51
Thanks for helping me figure this out.

View 4 Replies View Related

Float Type Steals My Decimal Points And Money Type Kills My Query

Mar 28, 2008

Happy Friday!
A while since I have posted a question, and this one is probably real easy.
I am trying to store numeric values from a php form in MSSQL 2000 database. However, the columns are set to float and if the value is 1.00, when entered into the table it is saved as 1

If I change the column type to money, the query fails, with an error message of conversion of datatype varchar to datatype money statement terminated.

anybody know what I need to do? do I need to do something in my query to specify that this is NOT varchar data?

View 2 Replies View Related

How To Declare A Procedure Parameter Type To Match A Referenced Table Colum Type

Dec 14, 2007

I like to define my procedure parameter type to match a referenced table colum type,
similar to PL/SQL "table.column%type" notation.
That way, when the table column is changes, I would not have to change my stored proc.
Any suggestion?

View 1 Replies View Related

Sqlbulkcopy Error : The Given Value Of Type SqlDecimal From The Data Source Cannot Be Converted To Type Decimal Of The Specified

Apr 16, 2008

Hi,

The table in SQL has column Availability Decimal (8,8)

Code in c# using sqlbulkcopy trying to insert values like 0.0000, 0.9999, 29.999 into the field Availability
we tried the datatype float , but it is converting values to scientific expressions��(eg: 8E-05) and the values displayed in reports are scientifc expressions which is not expected
we need to store values as is

Error:
base {System.SystemException} = {"The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column."}

"System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.ArgumentException: Parameter value '1.0000' is out of range.
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
at System.Data.SqlClient.SqlBulkCopy.WriteToServerInternal()
at System.Data.SqlClient.SqlBulkCopy.WriteRowSourceToServer(Int32 columnCount)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table, DataRowState rowState)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table)
at MS.Internal.MS
COM.AggregateRealTimeDataToSQL.SqlHelper.InsertDataIntoAppServerAvailPerMinute(String data, String appName, Int32 dateID, Int32 timeID) in C:\VSTS\MXPS Shared Services\RealTimeMonitoring\AggregateRealTimeDataToSQL\SQLHelper.cs:line 269"

Code in C#

SqlBulkCopy bulkCopy = new SqlBulkCopy(sqlConnection, SqlBulkCopyOptions.Default);
DataRow dr;
DataTable dt = new DataTable();
DataColumn dc;

try
{

dc = dt.Columns.Add("Availability", typeof(decimal));
��.

dr["Availability"] = Convert.ToDecimal(s[2]); ------ I tried SqlDecimal
��.

}
bulkCopy.DestinationTableName = "dbo.[Tbl_Fact_App_Server_AvailPerMinute]";
bulkCopy.WriteToServer(dt);

thx

View 8 Replies View Related

Implement Time Interval Type In Form Of User Defined Type

Dec 7, 2011

Implement time interval type in the form of a user defined type in SS2k8r2? Specifically an interval type described in the book Temporal Data and the Relational Model by C. J. Date at all. As an example, an interval is below:

1/4/2006:1/10/2006

which would mean the time period from 1/4 to 1/10.

View 3 Replies View Related

Bulk Insert Task Failing On Data Type Conversion For A Destination Column Of Type Bit

Jul 6, 2006

I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.

I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.

I hope someone can help me work through this.

Thanks in advance,

SK

SSIS package "Package3.dtsx" starting.

Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".

Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".

Task failed: Bulk Insert Task 1

Task failed: Bulk Insert Task

Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.

SSIS package "Package3.dtsx" finished: Failure.

View 5 Replies View Related

Msg 6522, Level 16, State 2, Line 1: System.InvalidCastException: Conversion From Type 'SqlBoolean' To Type 'Boolean' Is Not Val

Mar 6, 2008

I created a function called Temperature in VB to be used as a UDF in SQL2005. I get the error listed below. Any thoughts?

CREATE FUNCTION Temperature(@FluidName SQL_variant, @InpCode SQL_variant, @Units SQL_variant, @Prop1 SQL_variant, @Prop2 SQL_variant)

RETURNS Float

AS EXTERNAL NAME Fluids_VB6.[Fluids_VB6.FluidProperties.Fluids].Temperature

Then ran function:

select dbo.temperature('R22','t','e','225.6','0')

Got this:

Msg 6522, Level 16, State 2, Line 1

A .NET Framework error occurred during execution of user defined routine or aggregate 'Temperature':

System.InvalidCastException: Conversion from type 'SqlBoolean' to type 'Boolean' is not valid.

System.InvalidCastException:

at Microsoft.VisualBasic.CompilerServices.Conversions.ToBoolean(Object Value)

at Fluids_VB6.FluidProperties.Fluids.Setup(Object& FluidName)

at Fluids_VB6.FluidProperties.Fluids.CalcSetup(Object& FluidName, Object& InpCode, Object& Units, Object& Prop1, Object& Prop2)

at Fluids_VB6.FluidProperties.Fluids.CalcProp(Object& FluidName, Object& InpCode, Object& Units, Object& Prop1, Object& Prop2)

at Fluids_VB6.FluidProperties.Fluids.Temperature(Object FluidName, Object InpCode, Object Units, Object Prop1, Object Prop2)

Thanks

Buck

View 1 Replies View Related

Conversion From Type 'SqlInt32' To Type 'Integer' Is Not Valid]

Jun 30, 2007

Hi all,
I am developing ASP.NET 1.1 application using VB.NET & SQL Server, on my machine I am using SQL Server 2000, and everything is working just fine.
The problem appears when I uploaded the site to the Host, they are using SQL Server 2005, is there any reason for this, I am using casting in the code, and I am sure there is something wrong with the hosting settings.
Any suggestions.
Best Regards
Wafi Mohtaseb

View 4 Replies View Related

Conversion From Type 'DBNull' To Type 'String' Is Not Valid

Mar 7, 2008

Hello Friends
How are you?? Friends i am getting problem in SQL Server 2005. I am deployng web application on production server as well as Databse also. In production server i inserted new field in all tables which is rowguid and its type is uniqueidentifier. The default binding for this field is newsequentialid(). In some pages it works ok but in some places it generates error like 'Conversion from type 'DBNull' to type 'String' is not valid'. Can anybody help me to solve this problem. Its urgent so plz reply me as soon as possible. I'll be very thankfull to you. Thanks in Advance.
Regards,

View 1 Replies View Related

I Really Need A Debate! Type - Attributes Vs Super Type - Sub Types

Apr 22, 2004

View 2 Replies View Related

Connection Type Limitations When Using XML Data Type In SQL Task

Jul 23, 2007

I'm trying to use the SSIS Execute SQL Task to pull XML from a SQL 2005 database table. The SQL is of the following form:

SELECT
(

SELECT
MT.MessageId 'MessageId',
MT.MessageType 'MessageType',
FROM MessageTable MT
ORDER BY MT.messageid desc
FOR XML PATH('MessageStatus'), TYPE

)
FOR XML PATH('Report'), TYPE

For some reason I can only get this query to work if I use an ADO.NET connection type. If I try to use something like the OLEDB connection I get the following error:

<ROOT><?MSSQLError HResult="0x80004005" Source="Microsoft XML Extensions to SQL Server" Description="No description provided"?></ROOT>

Can anyone tell me why the SELECT ... FOR XML PATH... seems only to work with ADO.NET connections?

Thanks

Walter

View 1 Replies View Related

CREATE TYPE Failed Because It Could Not Find Type

Jul 28, 2006

Hello --

I am having a UDT problem. When I run the Create Type command. I receive the "could not find type" error. I have seen other posts on here related to the default namespace in VB.NET. When I add the namespace I receive "Incorrect syntax near '.'." What is the format of the EXTERNAL NAME parameter. Thanks for any help. Code below...

Incorrect Syntax Error:

DROP ASSEMBLY CadSqlUdtsCREATE ASSEMBLY CadSqlUdtsAUTHORIZATION [dbo]FROM 'E:CAD.NETCADUDTsReleaseCadSqlUdts.dll'WITH PERMISSION_SET = SAFEGOCREATE TYPE dbo.ReportingAreaUDTEXTERNAL NAME CadSqlUdts.[CadSqlUdts.CadSqlUdts].ReportingAreaUDT;GO

Could Not Find Type Error:

DROP ASSEMBLY CadSqlUdtsCREATE ASSEMBLY CadSqlUdtsAUTHORIZATION [dbo]FROM 'E:CAD.NETCADUDTsReleaseCadSqlUdts.dll'WITH PERMISSION_SET = SAFEGOCREATE TYPE dbo.ReportingAreaUDTEXTERNAL NAME CadSqlUdts.ReportingAreaUDT;GO
What's up??

View 3 Replies View Related

SqlDataSource.Select Error: Unable To Cast Object Of Type 'System.Data.DataView' To Type 'System.String'.

Oct 19, 2006

I am trying to put the data from a field in my database into a row in a table using the SQLDataSource.Select statement. I am using the following code: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)But when I run the code, I get the following error:Server Error in '/YorZap' Application. Unable to cast object of type 'System.Data.DataView' to type 'System.String'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.Source Error: Line 54: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'"
Line 55: 'myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments).GetEnumerator.Current, String)
Line 56: myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)
Line 57:
Line 58: filesTable.Rows.Add(myDataRow)Source File: D:YorZapdir_list_sort.aspx Line: 56 Stack Trace: [InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.]
ASP.dir_list_sort_aspx.BindFileDataToGrid(String strSortField) in D:YorZapdir_list_sort.aspx:56
ASP.dir_list_sort_aspx.Page_Load(Object sender, EventArgs e) in D:YorZapdir_list_sort.aspx:7
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +13
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +45
System.Web.UI.Control.OnLoad(EventArgs e) +80
System.Web.UI.Control.LoadRecursive() +49
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3743
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210 Please help me!

View 3 Replies View Related

Unable To Cast COM Object Of Type 'System.__ComObject' To Class Type 'System.Data.SqlClient.SqlConn

May 17, 2006

Dear all,

I am stuck with a SSIS package and I can��t work out. Let me know what steps are the correct in order to solve this.
At first I have just a Flat File Source and then Script Component, nothing else.

Error:

[Script Component [516]] Error: System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to class type 'System.Data.SqlClient.SqlConnection'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)

Script Code (from Script Component):

' Microsoft SQL Server Integration Services user script component
' This is your new script component in Microsoft Visual Basic .NET
' ScriptMain is the entrypoint class for script components

Imports System
Imports System.Data.SqlClient
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper

Public Class ScriptMain
Inherits UserComponent

Dim nDTS As IDTSConnectionManager90
Dim sqlConnecta As SqlConnection
Dim sqlComm As SqlCommand
Dim sqlParam As SqlParameter

Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)

Dim valorColumna As String
Dim valorColumna10 As Double

valorColumna = Row.Column9.Substring(1, 1)

If valorColumna = "N" Then
valorColumna10 = -1 * CDbl(Row.Column10 / 100)
Else
valorColumna10 = CDbl(Row.Column10 / 100)
End If

Me.Output0Buffer.PORCRETEN = CDbl(Row.Column11 / 100)
Me.Output0Buffer.IMPRETEN = CDbl(Row.Column12 / 100)
Me.Output0Buffer.EJERCICIO = CInt(Row.Column2)
Me.Output0Buffer.CODPROV = CInt(Row.Column7)
Me.Output0Buffer.MODALIDAD = CInt(Row.Column8)
Me.Output0Buffer.NIFPERC = CStr(Row.Column3)
Me.Output0Buffer.NIFREP = CStr(Row.Column4)
Me.Output0Buffer.NOMBRE = CStr(Row.Column6)
Me.Output0Buffer.EJERDEV = CDbl(Row.Column13)

With sqlComm
.Parameters("@Ejercicio").Value = CInt(Row.Column2)
.Parameters("@NIFPerc").Value = CStr(Row.Column3)
.Parameters("@NIFReP").Value = CStr(Row.Column4)
.Parameters("@Nombre").Value = CStr(Row.Column6)
.Parameters("@CodProv").Value = CInt(Row.Column7)
.Parameters("@Modalidad").Value = CInt(Row.Column8)
.Parameters("@ImpBase").Value = valorColumna10
.Parameters("@PorcReten").Value = CDbl(Row.Column11 / 100)
.Parameters("@ImpReten").Value = CDbl(Row.Column12 / 100)
.Parameters("@EjerDev").Value = CDbl(Row.Column13)

.ExecuteNonQuery()
End With

End Sub
Public Overrides Sub AcquireConnections(ByVal Transaction As Object)

Dim nDTS As IDTSConnectionManager90 = Me.Connections.TablaMODELO80
sqlConnecta = CType(nDTS.AcquireConnection(Nothing), SqlConnection)

End Sub
Public Overrides Sub PreExecute()

sqlComm = New SqlCommand("INSERT INTO hac_modelo180(Ejercicio,NIFPerc,NIFReP,Nombre,CodProv,Modalidad,ImpBase,PorcReten,ImpReten,EjerDev) " & _
"VALUES(@Ejercicio,@NIFPerc,@NIFReP,@Nombre,@CodProv,@Modalidad,@ImpBase,@PorcReten,@ImpReten,@EjerDev)", sqlConnecta)
sqlParam = New SqlParameter("@Ejercicio", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFPerc", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFReP", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Nombre", Data.SqlDbType.VarChar)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@CodProv", Data.SqlDbType.TinyInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Modalidad", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpBase", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@PorcReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@EjerDev", Data.SqlDbType.Decimal)
sqlComm.Parameters.Add(sqlParam)

End Sub

Public Sub New()

End Sub
Public Overrides Sub ReleaseConnections()
nDts.ReleaseConnection(sqlConnecta)
End Sub

Protected Overrides Sub Finalize()
MyBase.Finalize()
End Sub
End Class

Thanks a lot for your help

View 13 Replies View Related

@PARAM1 : Unable To Cast Object Of Type 'System.Data.SqlTypes.SqlInt32 To Type System.IConvertable

Apr 23, 2007

I get the following message in the vs2005 querybuilder when i do a preview:

***********************************
SQL Execution Error.

Executed SQL statement: SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = @PARAM1)

Error Source: SQL Server Compact Edition ADO.NET Data Provider

Error Message: @PARAM1 : Unable to cast object of type 'System.Data.SqlTypes.SqlInt32 to type System.IConvertable'.
****************************************

The same querypreview works fine without the parameter:

SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = 186)

Can anybody tell me why this is?
And tell me a way to get the tableadapter working?

Anne-Jan Tuinstra

View 3 Replies View Related

Index Creation Causes Error The Conversion Of A Char Data Type To A Datetime Data Type Resulted...

Jul 23, 2005

Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!

View 1 Replies View Related

Convert Ntext Type To XML Type

Dec 6, 2007

I have a ntext column which stores rows of xml data. Ive decided that the best way to query the xml data is to Convert the ntext data into xml data type and use Sql Server 2005 builtin Xml Query tools to perform FLWOR expressions. The problem Im having is getting the ntext data Converted to xml.When I try to convert the ntext text, I of course get an error that local variables of ntext type are invalid.Any suggestions on a way I might accomplish this?Thanks, -lance

View 1 Replies View Related

A Text-type Value To A Date-type Value

Apr 2, 2008

Hi
Is it possibly in SqlDataSource's SelectCommad to convert a text-type value to a date-type value (11/1/2008 (text) -> 11/1/2008 (date) ) , so that order by can be used. Or is the other ways to use order by correctly with text-type (date)values
Thanks.

View 4 Replies View Related

Unable To Cast Object Of Type 'System.String' To Type 'System.Web.UI.WebControls.Parameter'.

Jun 19, 2008

I'm getting this error on a vb.net page the needs to execute two separate stored procedures. The first one, is the main insert, and returns the identity value for the ClientID. The second stored procedure inserts data, but needs to insert the ClientID returned in the first stored procedure. What am I doing wrong with including the identity value "ClientID" in the second stored procedure?
Unable to cast object of type 'System.String' to type 'System.Web.UI.WebControls.Parameter'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.String' to type 'System.Web.UI.WebControls.Parameter'.Source Error:

Line 14: If li.Selected Then
Line 15: InsertClientCompanyType.InsertParameters("CompanyTypeID").DefaultValue = li.Value
Line 16: InsertClientCompanyType.InsertParameters("ClientID") = ViewState("ClientID")
Line 17:
Line 18:
Source File: C:InetpubwwwrootIntranetExternalAppsNewEmploymentClientNewClient.aspx.vb Line: 16
Here is my code behind... What am I doing wrong with grabbing the ClientID from the first stored procedure insert?

Protected Sub InsertNewClient_Inserted(ByVal sender As Object, ByVal e As SqlDataSourceStatusEventArgs)ClientID.Text = e.Command.Parameters("@ClientID").Value.ToString()ViewState("ClientID") = e.Command.Parameters("@ClientID").Value.ToString()End SubProtected Sub Submit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Submit.ClickInsertNewClient.Insert()For Each li As ListItem In CompanyTypeID.Items
If li.Selected ThenInsertClientCompanyType.InsertParameters("CompanyTypeID").DefaultValue = li.ValueInsertClientCompanyType.InsertParameters("ClientID") = ViewState("ClientID")InsertClientCompanyType.Insert()End IfNextEnd Sub

View 2 Replies View Related

Unable To Cast COM Object Of Type 'ADODB.CommandClass' To Interface Type 'ADODB._Command'

Dec 20, 2006

I have an application which runs successfully on a couple of my customer's machines but fails on a third. It seems to fail when opening the database:

Unable to cast COM object of type 'ADODB.CommandClass' to interface type 'ADODB._Command'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{B08400BD-F9D1-4D02-B856-71D5DBA123E9}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=false; Initial Catalog=lensdb;Data Source = SQL

Before I got this error I was getting another problem (sorry didn't make a copy of that error's text) that made me think that adodb.dll simply wasn't loaded/registered. I got rid of that error by copying my adodb.dll onto the third machine and running gacutil /i. There is now an entry in winntassemblies for adodb.

Just in case you think it could be an obvious registry problem: when I started getting the current error I thought that maybe the registry needed updating and I merged the following lines into onto the target machine (from my dev machine):

Windows Registry Editor Version 5.00

[HKEY_CLASSES_ROOTInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}]
@="_Command"

[HKEY_CLASSES_ROOTInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}ProxyStubClsid]
@="{00020424-0000-0000-C000-000000000046}"

[HKEY_CLASSES_ROOTInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}ProxyStubClsid32]
@="{00020424-0000-0000-C000-000000000046}"

[HKEY_CLASSES_ROOTInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}TypeLib]
@="{EF53050B-882E-4776-B643-EDA472E8E3F2}"
"Version"="2.7"

[HKEY_LOCAL_MACHINESOFTWAREClassesInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}]
@="_Command"

[HKEY_LOCAL_MACHINESOFTWAREClassesInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}ProxyStubClsid]
@="{00020424-0000-0000-C000-000000000046}"

[HKEY_LOCAL_MACHINESOFTWAREClassesInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}ProxyStubClsid32]
@="{00020424-0000-0000-C000-000000000046}"

[HKEY_LOCAL_MACHINESOFTWAREClassesInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}TypeLib]
@="{EF53050B-882E-4776-B643-EDA472E8E3F2}"
"Version"="2.7"

but, no change alas.

All three machines are running Windows 2000.

Any advice would be appreciated.

Thanks in advance,

Ross

View 1 Replies View Related

Unable To Cast Object Of Type 'System.DBNull' To Type 'System.Byte[]'.

Aug 13, 2007

Hi,
I have developed a custom server control for .NET Framework 2.0. The server control has a property named BinaryData of type byte[]. I marked this property to be data bindable. Now, I have varbinary(Max) type of field in my SQL Database and I have used SQLDataSource and bound this varbinary(Max) field with the property BinaryData (byte[]) of my control. It is working fine as long as the data value is not NULL. Now, In my control, I have handled the NULL value so that no Exception is thrown. Still, when I bind this property using the SQLDataSource, I get Error "Unable to cast object of type 'System.DBNull' to type 'System.Byte[]'." I am not sure if I can do anything to stop this erro within my control. If it is not possible from the control, then what is the workaround that I can do in my ASPX page in order to stop this error ?
Thanks a lot in advance.

View 10 Replies View Related