In playing with differential backups, i have taken a full last night, 17GB, took my first diff today 16.5GB, took another diff right after, it was still 16.5GB, took another diff right after 16.5 GB. This database has 0 activity during the day, the import takes place @ night, and select's are done to it during the day. Any help would be greatly appreciated
View 3 RepliesI have a full backup and several diff backup,now i want to restore
firstly,I restore full backup
RESTORE DATABASE ***
FROM DISK = 'D:databackup200610140000.bak'
WITH NORECOVERY
GO
it's working,then i don;'t know how to continue
Thanks in advance
Can i restore a diff. backup alone without a complete backup?
(what i am trying is this.....there are two different servers at two diff. places....i need to have both servers in sync. at all times.modifications will take place in one server and the modifications have to be reflected in the other server.i could not go for replication as the servers cannot be connected.sending complete backups daily will be a overhead .hence planning to take complete backup once and send diff. backups alone on subsequent days to the other server.
how can i achieve this?)
Dear all
I am new to the MS SQL, my problem is as follows.
I am having a online database on sql 2k.
every 15 days we have to give payout from our system, so we
have a offline server in our office, we take the complete backup of that day & restore the same on the offline server,
& start the payout process.
The problem is that the full backup is a big file & take a lot of time for downloading from online server.
is it possible that we take on diff. backup of that day & will restore the same on the offline server so the file will take less time to download.
but my offline backup is 15 days old, will that update all the records or not?
regards
Abhijit
I have a handful of jobs that I need to troubleshoot, but this one will hopefully give me enough insight to do the rest myself. I need to figure out why a Maintenance Plan that performs a Diff Backup on 4 databases, and then a transaction log back up on the 4 databases is failing. I just get the following error message, and I cannot tell what failed.
Executed as user: <SERVER_NAME>SYSTEM. ... 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 11:20:05 AM
Progress: 2008-01-03 11:20:05.95
Source: {SOME_STUFF_WAS_HERE}
Executing query "DECLARE @Guid UNIQUEIDENTIFIER EXECUTE msdb..sp".: 100% complete
End Progress
Progress: 2008-01-03 11:20:06.35
Source: Back Up Database (Differential)
Executing query "EXECUTE master.dbo.xp_create_subdir N'D:Program F".: 100% complete
End Progress
Progress: 2008-01-03 11:20:06.35
Source: Back Up Database (Differential)
Executing query "EXECUTE master.dbo.xp_create_subdir N'D:Program F".: 100% complete
End Progress
Progress: 2008-01-03 11:20:06.37
Source: Back Up Database (Differential)
Executing query "EXECUTE master.dbo.xp_create_subdir N'D:Program F".: 100% complete
End Progress
Progress: 2008-01-03 11:20:06.37
Source: Back Up Database (Differential) ... The package execution fa... The step failed.
How can I find out how to fix this problem? And please let me know if I am doing something wrong. (For instance, perhaps those two tasks shouldn't be together.)
- - - -
- Will -
- - - -
http://www.strohlsitedesign.com
http://blog.strohlsitedesign.com/
http://skins.strohlsitedesign.com/
Friends,
I have taken backup of a database, of which Data (MDF) & Log (LDF) files are located on "E:...." directory.
Now, I am using the same backup file to restore on another PC which is having no partitions at all. I mean now I have to restore the database using same backup file, of which Data & Log files should be located on "C:...." directory only, as it has no partitions.
This restore process gives me error :
Restore failed for Server 'HSVMMICROFIT'.
Details : System.Data.SqlClient.SqlError: The operating system returned the error '5(Access is denied.)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'C:Program FilesMicroFitHealthStar v6.0 Server EditionDataMICROFIT_HealthStar_Data.mdf'.
What is to be done, in order to restore the database from the same back up file successfully, regardless whether the original physical location of the MDF & LDF file, is existing on current PC ??????????????
Please try to solve the same for me.... W8ing...
SQL Server 2000 sp3 Enterprise (8.00.818) running on W2K Adv Server cluster.
DB's and backups resided on a fibre SAN attached IBM FAStT 500 storage controller.
I had problems with random restore failures, getting errors such as "3270 Internal Consistency Error" on log restores or on full restores after reporting problems with some of the files. This was fixed (we thought) by disabling the read caching on the FAStT 500 storage controller, per Microsoft's recommendation.
We have a custom-written log shipping solution that maintains a 2nd copy of our user DB on the same system, so there's 700+ backups/restores of various types in the course of a week. After two months of error-free operation, we just got another Internal Consistency Error, but this time on a differential restore, which was a first. Looking back, we realized we were running a DBCC INDEXDEFRAG command on the source DB at the time the differential backup was running. Taking a new differential and using it in the restore sequence worked fine, so clearly the problem was in the first diff backup file.
Anybody else noticed any problems with running DBCC INDEXDEFRAG at the same time as a differntial backup?
Need help.
We lost (Couldn't find ) the full backup on a Tape we were supposed to use for restore, but seems like they lost it. All we have is a Diff backup. Wondering if that is any good at all .
Please help
Thanks
SQL Server 2012-SP2 and Windows 2008R2
I need to copy the last differential backup file from the production server directory to a data warehouse server directory. There are 3 differential backup files on the directory and I need to grab the latest one. I have the following syntax which work from a batch file but it does not work when I put it into a job step as a cmd even though I remove the double %% to only one %.
echo @off
set path1="192.29.305.213$SqlserverProductionBa ckupsKBR_PROD"
set path2=K:SqlserverDatawarehouseBackupPROD
for /f "tokens=*" %%a in ('dir /b /a-d /o-d "%path1%DIFF*.bak"') do copy "%path1%\%%~a" "%path2%" & goto nextstep
:nextstep
Echo File Copied.
Even when I change it to (only one % for the variable),
for /f "tokens=*" %a in ('dir /b /a-d /o-d "%path1%DIFF*.bak"') do copy "%path1%\%~a" "%path2%"
It does not work..........It runs successfully but no file is copied or I get
Message
Executed as user: PROD23Sqladm024. The process could not be created for step 1 of job 0xEAAF943771FF304A9E7AD8ADAC24F96C (reason: The system cannot find the file specified). The step failed.
I know that the file is there. It works with batch file. Poweshell script can be OK. No SSIS - Not installed
Hello,
My master database (MS SQL 2005) has simple recovery model, however, when performing diff backup of "all databases", I am getting the following error:
Executing the query "BACKUP DATABASE [master] TO DISK = N'X:\Database Backups\diff backups\master\master_backup_200803251235.bak' WITH DIFFERENTIAL , NOFORMAT, NOINIT, NAME = N'master_backup_20080325123514', SKIP, REWIND, NOUNLOAD, STATS = 10
" failed with the following error: "You can only perform a full backup of the master database. Use BACKUP DATABASE to back up the entire master database.
BACKUP DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
If I choose to back up only "All user databases", then it performs just fine. Why I cannot run diff backup of master?
I have a question regarding FUll and differential backup.
We we take full or diff back up, does it create lot of logs ie. Does full or diff backup has any impact on log size?
Thanks
Hi all
Is it possible taking Diff backup of master database,If recovery model is FULL..
Hello all,
I need help concerning a differential backup on a MSDB database.
I received this message when I tried to backup it
Log from Windows
Event Type: Error
Event Source: SQLVDI
Event Category: None
Event ID: 1
Date: 8/1/2007
Time: 2:03:37 PM
User: N/A
Computer: XXX
Description:
SQLVDI: Loc=SignalAbort. Desc=Client initiates abort. ErrorCode=(0). Process=9028. Thread=5928. Client. Instance=. VD=GlobalData Protector_(DEFAULT)_msdb_14_00_21.
Log from DataProtector
Normal] From: XXX "(DEFAULT)" Time: XXX
SQL statement:
BACKUP DATABASE [msdb] TO
VIRTUAL_DEVICE = "Data Protector_(DEFAULT)_msdb_06_00_14"
WITH NAME = 'Data Protector: 2007/08/01 0064', DIFFERENTIAL, BLOCKSIZE = 4096, MAXTRANSFERSIZE = 65536;
[Warning] From: XXX "(DEFAULT)" Time: XXX
Error has occurred while executing a SQL statement.
Error message: '<Microsoft SQL-DMO (ODBC SQLState: 42000):bdb>
[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot perform a differential backup for database "msdb", because a current database backup does not exist. Perform a full database backup by reissuing BACKUP DATABASE, omitting the WITH DIFFERENTIAL option.
[Microsoft][ODBC SQL Server Driver][SQL Server]BACKUP DATABASE is terminating abnormally.'
Ive tried to do a full followed straight after by a diff but doent help.
Thank you for your help
I need to write a 'select' statement to fetch data from different tables, which are located on different servers.
Can any one help in writing this 'select' statement with out moving the tables on to same server.
Thanks in Advance.
Murali Raparla.
I need to return the number of min from a table I am using the following query. But it gives me an error "Msg 241, Level 16, State 1, Line 1Syntax error converting date time from character string". can someone please help.SELECT DateDiff(Mi, CAST((SCHDATE + ' ' + SUBSTRING(SCHTIME, 1,2) + ':' + SUBSTRING(SCHTIME, 3,4)) AS DateTime), CAST((ACTDATE + ' ' + SUBSTRING(ACTIME, 1,2) + ':' + SUBSTRING(ACTIME, 3,4)) AS DateTime)) AS StopMinutes, BACPY, BARTRM, BAORD, BSAPOR, BABLN, BSASSQ, BSACNO, CSTRDATA, BSASCY, BSASST, TTLREV, SHAALP, SCHDATE, SCHTIME, ACTDATE, ACTIME, OQTCOD, BAADES, PCS, WGT, Tractor, Driver FROM dbo.JCI_Delivery_Report
View 3 Replies View RelatedHi,
i have 3 fields: start_inspect_datetime, end_inspect_datetime, Diag_Hrs.
so i want to get the difference of start and end datetime=Diag_Hrs.
here i am using the below stored proc.
but i am getting only the hours or minutes or seconds.
so how to get the hours(if diff>59 mins),minutes(if diff>59 sec),seconds.
for Ex: here diff=185 sec. then Diag_hrs should be 3 hours,0 mins, 5 secs.
so how we'll get this.
pl help me out asap.
Thanx
reddy
select Asset_Diag_Hrs= DATEDIFF(hh,start_inspect_datetime,end_inspect_dat etime) from asset_diag_trans_table
--where Gpc_no=@GPC_no
--select Asset_Diag_Hrs=(datediff(mm,start_inspect_datetime ,end_inspect_datetime)) from asset_diag_trans_table
-- where Gpc_no=@GPC_no
select Asset_Diag_Seconds=(datediff(ss,start_inspect_date time,end_inspect_datetime) ) from asset_diag_trans_table
where Gpc_no=@GPC_no
I have 2 databases:
1 from production and 1 from development.
None of the developers kept a changelog so i need to know what has changed (or what is different between the 2).
Any Ideas on how to do this?
Hey guys,
m new to SQL i mean really new so i appreciate all the help i can get on this as soon as possible.
Is it possible to extract 3 foreign keys from a single table into one record/row on a different problem ?
Thnx guys hope to hear soon
Hello,
I wanted to know the difference between SQL Server 2005 ( RTM) Version and the regular SQL Server 2005 SP2. And does the RTM version have any service packs.
Thanks
Are there any tools/utilties that can diff 2 sql server databases. I know the DB Pro Edition of VSTS can do it, but its hard to justify a jump from my $800 copy of VS2005 Pro to a $5k-6k version of VS just to get database diff. The tablediff looks promising but I need it to do SPROCS and SFUNCS too. Any helps or recommendations would be appreciated.
View 4 Replies View Related
Hi there
I'm getting this message on my third automated backup of the transaction logs of the day. Both databases are in full recovery mode, both successfully backed up at 01.00. The transaction logs backed up perfectly happily at 01:30 and 05:30, but failed at 09:30.
The only difference between 05:30 and 09:30's backups is that the log files were shrunk at 08:15 (the databases in question are the ones that sit under ILM2007, and keeping the log files small keeps the system running better).
Is it possible that shrinking the log files causes the database to think that there hasn't been a full database backup?
Thanks
Jane
Hi All,
What is the difference betwen real and float datatype of SQL server.
Please one exapmle for each.
The real datatype is like a float except that real can only store numbers.What does it mean: float can store even characters.
Thanks
Abdul
What is the difference between money and smallmoney, and is there a way to format these?
View 3 Replies View RelatedHi.
When I execute the following sql statement in SQL 2000 DTS or query analyzer, I received the following error message. I used [ ] because my field names have spaces in between.
The same sql statement ran perfect in SQL 7. What could be wrong? Please advise. Thanks a million.
Update SAPvsSQL set [Sales Organisation] = sales_org,
[Value Out By] = val_diff, [Qty Out By] = qty_diff
Error message:
Server: Msg 16882, Level 11, State 1, Procedure sp_runwebtask, Line ....
SQL Web Assistant: Web task not found. Verify the name of the name for possible errors.
Best regards
Hi, I need to know the difference between Numeric and Decimal datatypes. In which we case we use numeric and in which case we use decimal? I searched in some sql related websites and came to know that both are same. Then what is the need of these two datatypes? Either Numeric or Decimal is alone enough? Please explain me in detail ....
Awaiting your replies...
Thanks,
Rakesh.
HEY,
CAN YOU TELL ME THE DIFFERENCES BETWEEN VARIOUS SQL
hi
could any one help me in differentiating between varchar and nvarchar
Thanks in advance
I have a table t1 with two columns : c11 varchar(32) , c22 varchar(32)The data in the table is :'11', 'aa01'and on upto'11', 'aa50' : total 50 entries'22', 'b01''22', b'02''22', b'03''33', 'c01' to '33', 'c40' : total 40 entries'44', 'b02''44', 'd01''44', 'd01''44', 'd01'How can write a query which will bunch together values of c11with rows 5, and then bunch together values of c11 withrows < 6, and add them up.My output should be :'11' 50'33' 40'others' 7 (3 rows for '22' and 4 for '44' are bunchedtogetheras the # of rows < 6, and added. 3+4 = 7)
View 1 Replies View Related
Country1
Country2
2006
2007
% diff
2006
2007
% diff
Segment1
80
90
12.50%
60
50
-16.67%
Segment2
150
120
-20.00%
80
100
25.00%
Total
230
210
-8.70%
140
150
7.14%
I need a to build a result as shown above in matrix, many countries will be in resultset and each country performance is evaluated based on previous year. (90-80)/80=12.50%. the problem is this year and segment values are calculated based on aggregate functions and is derived by means of specific formaule. for country1 in year 2006 for segment1 the value 80,90 is arrived by using sum(leadtime*Ordervalue)/sum(Ordervalue).
So i cannot store these current and previous year values for calculating the % bymeans of custom code, runningvalue cannot be used as the formulae already has an aggregate, is there any direct way to locate the cell references just like excel R1C1 with matrix? if so then i can refer the cells for calculating my %. please help.
Thanks in advance.
brinda
My goal is to add a diff into a query that grabs data from 2 different tables.
The code:
SELECT
MIN(TableName) as TableName,
ID1, COL1, COL2, COL3, COL4, COL5, COL6, COL7, COL8
,COL9, COL10, COL11, COL12, COL13, COL14, COL15, --COL16,
COL17, COL18, COL19, COL20, COL21
FROM
(
SELECT 'Table A' as TableName,
SessionID as ID1,
StartDateCode as COL1,
StartTimeCode as COL2,
EndDateCode as COL3,
EndTimeCode as COL4,
HandledByCode as COL5,
DispositionCode as COL6,
DNISCode as COL7,
CallServiceQueueCode as COL8,
ApplicationCode as COL9,
IVREndPointCode as COL10,
BankCode as COL11,
TotalQueueTimeSS as COL12,
TotalAgentTalkTimeSS as COL13,
TotalAgentHoldTimeSS as COL14,
TotalAgentHandleTimeSS as COL15,
--TotalIVRTimeSS as COL16,
AfterHoursFlag as COL17,
SourceSystemID as COL18,
anubisTransferExtNumber as COL19,
anubisEndPoint as COL20,
AccountNumber as COL21
from [pdx0sql45].Rubicon_Marts.dbo.INB_Call_Fact
where startdatecode between 2738 and 2769
UNION all
SELECT 'Table B' as TableName,
SessionID as ID1,
StartDateCode as COL1,
StartTimeCode as COL2,
EndDateCode as COL3,
EndTimeCode as COL4,
HandledByCode as COL5,
DispositionCode as COL6,
DNISCode as COL7,
CallServiceQueueCode as COL8,
ApplicationCode as COL9,
IVREndPointCode as COL10,
BankCode as COL11,
TotalQueueTimeSS as COL12,
TotalAgentTalkTimeSS as COL13,
TotalAgentHoldTimeSS as COL14,
TotalAgentHandleTimeSS as COL15,
--TotalIVRTimeSS as COL16,
AfterHoursFlag as COL17,
SourceSystemID as COL18,
anubisTransferExtNumber as COL19,
anubisEndPoint as COL20,
AccountNumber as COL21
from pdx0sql04.Rubicon_Marts.dbo.INB_Call_Fact
where startdatecode between 2738 and 2769
) tmp
GROUP BY ID1, COL1, COL2, COL3, COL4, COL5, COL6, COL7, COL8
,COL9, COL10, COL11, COL12, COL13, COL14, COL15, --COL16,
COL17, COL18, COL19, COL20, COL21
HAVING COUNT(*) = 1
ORDER BY 2,1
---------
Is it possible to add a command into the query to output diff/compare scenario?
Thanks in advance for any help.
Hi @all,
I designed a query in report designer, data tab. This query runs 24 secs, when I execute it from the data tab in report designer.
Publishing the report and running it from the report server. The query needs 40x the time as in report designer.
Looking at the Execution Log, the report needs 800 secs for TimeDataRetrieval.
Why is it so much slower to run the query from report server? The report designer has also to retrieve the data, and runs so much faster.
Thanks for any hints
T
Hi ,
What is the diff between Logins & Users in SQL Server?
thanks
Babu
The DB Enginee is SQL2005 SP1. In MSSMS
the following query always finishes within 1 minute
SELECT *
FROM t1 INNER JOIN t2 ON t1.key= t2.key
where t1.StartTime >= '3/19/2008' AND t1.EndTime <= '3/20/2008'
AND t2.StartTime >= t1.StartTime AND t2.StartTime < t1.EndTime
however, the following always takes 10+ minutes
declare @pStartDate datetime
declare @pEndDate datetime
set @pStartDate='3/19/2008'
set @pEndDate='3/20/2008'
SELECT *
FROM t1 INNER JOIN t2 ON t1.key= t2.key
where t1.StartTime >= @pStartDate AND t1.EndTime <= @pEndDate
AND t2.StartTime >= t1.StartTime AND t2.StartTime < t1.EndTime
Both return same result. The only diff. is the blue part. Why the second one performances so badly?
Thanks.