Diff Betn Function And Stored Procedure
May 22, 2008Hii , can anyone tell me the difference of using function and stored procedure and similarity between them...
View 2 Replies
ADVERTISEMENT
What Is Diff Betn Cast And Convert
May 22, 2008Hi alll,can anyone tell me that In which cases cast is used in db and what is diff betn cast and convert
View 9 Replies View RelatedDiff Betn Element & Attribute Centric
Jan 23, 2006Friends,
In OPEN XML statements . i'm not able to distinguish the diff betn Element centric and attribute centric clearly??
Can any one throw some light on this ??
Diff. B/w Stored Procedures And Function??
Nov 28, 2006Diff. b/w Stored Procedures and Function??
When any of them is appropriate to use?
Diff B/w Executing As Stored Procedure And Script
Nov 6, 2006Hi All, I have a peculiar problem with SQL2000. When i execute a Stored procedure in Demo & Production i get different outputs. But i copied the business logistics from the Sp and executed as a script in both the servers. Now Both the records are same.
I WANT TO KNOW " WHETHER THERE IS ANY DIFFERENCE IN EXECUTION METHODOLOGY BETWEEN STORED PROCEDURE AND QUERY".
NOTE: My stored procedure has 14 executable scripts. Upto 10 scripts no date comparisons were made. But at the 11th script the records differ.
I DOUBT WHETHER THERE WILL BE ANY DATE RELATED ISSUE WHEN EXECUTING AS STORED PROCEDURE AND SCRIPT
Diff. Performance In Query Analyzer Than When Using Stored Procedure
Jul 20, 2005Hi group,I have a select statement that if run against a 1 million recorddatabase directly in query analyzer takes less than 1 second.However, if I execute the select statement in a stored procedureinstead, calling the stored proc from query analyzer, then it takes12-17 seconds.Here is what I execute in Query Analyzer when bypassing the storedprocedure:USE VerizonGODECLARE @phonenumber varchar(15)SELECT @phonenumber = '6317898493'SELECT Source_Identifier,BADD_Sequence_Number,Record_Type,BAID ,Social_Security_Number ,Billing_Name,Billing_Address_1,Billing_Address_2,Billing_Address_3,Billing_Address_4,Service_Connection_Date,Disconnect_Date,Date_Final_Bill,Behavior_Score,Account_Group,Diconnect_Reason,Treatment_History,Perm_Temp,Balance_Due,Regulated_Balance_Due,Toll_Balance_Due,Deregulated_Balance_Due,Directory_Balance_Due,Other_Category_BalanceFROM BadDebtWHERE (Telephone_Number = @phonenumber) OR (Telephone_Number_Redef =@phonenumber)order by Service_Connection_Date descRETURNGOHere is what I execute in Query Analyzer when calling the storedprocedure:DECLARE @phonenumber varchar(15)SELECT @phonenumber = '6317898493'EXEC Verizon.dbo.baddebt_phonelookup @phonenumberHere is the script that created the stored procedure itself:CREATE PROCEDURE dbo.baddebt_phonelookup @phonenumber varchar(15)ASSELECT Source_Identifier,BADD_Sequence_Number,Record_Type,BAID ,Social_Security_Number ,Billing_Name,Billing_Address_1,Billing_Address_2,Billing_Address_3,Billing_Address_4,Service_Connection_Date,Disconnect_Date,Date_Final_Bill,Behavior_Score,Account_Group,Diconnect_Reason,Treatment_History,Perm_Temp,Balance_Due,Regulated_Balance_Due,Toll_Balance_Due,Deregulated_Balance_Due,Directory_Balance_Due,Other_Category_BalanceFROM BadDebtWHERE (Telephone_Number = @phonenumber) OR (Telephone_Number_Redef =@phonenumber)order by Service_Connection_Date descRETURNGOUsing SQL Profiler, I also have the execution trees for each of thesetwo different ways of running the same query.Here is the Execution tree when running the whole query in theanalyzer, bypassing the stored procedure:--------------------------------------Sort(ORDER BY:([BadDebt].[Service_Connection_Date] DESC))|--Bookmark Lookup(BOOKMARK:([Bmk1000]),OBJECT:([Verizon].[dbo].[BadDebt]))|--Sort(DISTINCT ORDER BY:([Bmk1000] ASC))|--Concatenation|--IndexSeek(OBJECT:([Verizon].[dbo].[BadDebt].[Telephone_Index]),SEEK:([BadDebt].[Telephone_Number]=[@phonenumber]) ORDERED FORWARD)|--IndexSeek(OBJECT:([Verizon].[dbo].[BadDebt].[Telephone_Redef_Index]),SEEK:([BadDebt].[Telephone_Number_Redef]=[@phonenumber]) ORDEREDFORWARD)--------------------------------------Finally, here is the execution tree when calling the stored procedure:--------------------------------------Sort(ORDER BY:([BadDebt].[Service_Connection_Date] DESC))|--Filter(WHERE:([BadDebt].[Telephone_Number]=[@phonenumber] OR[BadDebt].[Telephone_Number_Redef]=[@phonenumber]))|--Compute Scalar(DEFINE:([BadDebt].[Telephone_Number_Redef]=substring(Convert([BadDebt].[Telephone_Number]),1, 10)))|--Table Scan(OBJECT:([Verizon].[dbo].[BadDebt]))--------------------------------------Thanks for any help on my path to optimizing this query for ourproduction environment.Regards,Warren WrightScorex Development Team
View 5 Replies View RelatedSqlDataSource.SelectParameters Causing Procedure Or Function Stored Procedure Has Too Many Arguments Specified.
Sep 12, 2006 Hi everybody, I am having trouble how to fixed this code. I am trying to supply the parameterinside a stored procedure with a value, and displays error message shown below. If I did not supply the parameter with a value, it works. How to fix this?Error Message:Procedure or function <stored proc name> has too many arguments specified.Thanks,den2005
Stored procedure:
Alter PROCEDURE [dbo].[sp_GetIdeaByCategory]
@CatId <span class="kwd">int</span> = 0
AS
BEGIN
SET NOCOUNT ON;
Select I.*, C.*, U.* From Idea I inner join IdeaCategory C on I.CategoryID = C.IdeaCategoryID inner join Users U on I.UserID = U.UserID Where I.CategoryID = @CatId Order By LastModifiedDate Desc
End
oDataSource.ConnectionString = constr;
oDataSource.SelectCommand = storedProc;<span class="cmt">//storedproc - sp_GetIdeaByCategory</span>
oDataSource.SelectCommandType = SqlDataSourceCommandType.StoredProcedure;
oDataSource.SelectParameters.Add(<span class="st">"@CatId"</span>, catId);
gdvCategories.DataSourceID = oDataSource.ID;
gdvCategories.DataBind(); <<--- Error occured here
Gridview / SqlDataSource Error - Procedure Or Function &<stored Procedure Name&> Has Too Many Arguments Specified.
Jan 19, 2007Can someone help me with this issue? I am trying to update a record using a sp. The db table has an identity column. I seem to have set up everything correctly for Gridview and SqlDataSource but have no clue where my additional, phanton arguments are being generated. If I specify a custom statement rather than the stored procedure in the Data Source configuration wizard I have no problem. But if I use a stored procedure I keep getting the error "Procedure or function <sp name> has too many arguments specified." But thing is, I didn't specify too many parameters, I specified exactly the number of parameters there are. I read through some posts and saw that the gridview datakey fields are automatically passed as parameters, but when I eliminate the ID parameter from the sp, from the SqlDataSource parameters list, or from both (ID is the datakey field for the gridview) and pray that .net somehow knows which record to update -- I still get the error. I'd like a simple solution, please, as I'm really new to this. What is wrong with this picture? Thank you very much for any light you can shed on this.
View 9 Replies View RelatedProcedure Or Function 'stored Procedure Name' Expects Parameter Which Was Not Supplied
Mar 26, 2007Has anyone encountered this before?
Procedure or Function 'stored procedure name' expects parameter '@parameter', which was not supplied.
It seems that my code is not passing the parameter to the stored procedure.
When I click this hyperlink:
<asp:HyperLink
ID="HyperLink1"
Runat="server"
NavigateUrl='<%# "../Division.aspx?CountryID=" + Eval("CountryID")%>'
Text='<%# Eval("Name") %>'
ToolTip='<%# Eval("Description") %>'
CssClass='<%# Eval("CountryID").ToString() == Request.QueryString["CountryID"] ? "CountrySelected" : "CountryUnselected" %>'>
</asp:HyperLink>
it is suppose to get the country name and description, based on the country id.
I am passing the country id like this.
protected void Page_Load(object sender, EventArgs e)
{
PopulateControls();
}
private void PopulateControls()
{
string countryId = Request.QueryString["CountryID"];
if (countryId != null)
{
CountryDetails cd = DivisionAccess.GetCountryDetails(countryId);
divisionNameLabel.Text = cd.Name;
divisionDescriptionLabel.Text = cd.Description;
}
}
To my app code like this:
public struct CountryDetails
{
public string Name;
public string Description;
}
public static class DivisionAccess
{
static DivisionAccess()
public static DataTable GetCountry()
{
DbCommand comm = GenericDataAccess.CreateCommand();
comm.CommandText = "GetCountry";
return GenericDataAccess.ExecuteSelectCommand(comm);
}
public static CountryDetails GetCountryDetails(string cId)
{
DbCommand comm = GenericDataAccess.CreateCommand();
comm.CommandText = "GetCountryDetails";
DbParameter param = comm.CreateParameter();
param.ParameterName = "@CountryID";
param.Value = 2;
param.DbType = DbType.Int32;
comm.Parameters.Add(param);
DataTable table = GenericDataAccess.ExecuteSelectCommand(comm);
CountryDetails details = new CountryDetails();
if (table.Rows.Count > 0)
{
details.Name = table.Rows[0]["Name"].ToString();
details.Description = table.Rows[0]["Description"].ToString();
}
return details;
}
As you can see I have two stored procedures I am calling, one does not have a parameter and the other does. The getcountry stored procedure returns the list of countries in a menu that I can click to see the details of that country. That is where my problem is when I click the country name I get
Procedure or Function 'GetCountryDetails' expects parameter '@CountryID', which was not supplied
Someone please help!
Thanks Nickdel68
Calling A Stored Procedure Or Function From Another Stored Procedure
Mar 2, 2007Hello people,
When I am trying to call a function I made from a stored procedure of my creation as well I am getting:
Running [dbo].[DeleteSetByTime].
Cannot find either column "dbo" or the user-defined function or aggregate "dbo.TTLValue", or the name is ambiguous.
No rows affected.
(0 row(s) returned)
@RETURN_VALUE =
Finished running [dbo].[DeleteSetByTime].
This is my function:
ALTER FUNCTION dbo.TTLValue
(
)
RETURNS TABLE
AS
RETURN SELECT Settings.TTL FROM Settings WHERE Enabled='true'
This is my stored procedure:
ALTER PROCEDURE dbo.DeleteSetByTime
AS
BEGIN
SET NOCOUNT ON
DECLARE @TTL int
SET @TTL = dbo.TTLValue()
DELETE FROM SetValues WHERE CreatedTime > dateadd(minute, @TTL, CreatedTime)
END
CreatedTime is a datetime column and TTL is an integer column.
I tried calling it by dbo.TTLValue(), dbo.MyDatabase.TTLValue(), [dbo].[MyDatabase].[TTLValue]() and TTLValue(). The last returned an error when saving it "'TTLValue' is not a recognized built-in function name". Can anybody tell me how to call this function from my stored procedure? Also, if anybody knows of a good book or site with tutorials on how to become a pro in T-SQL I will appreciate it.
Your help is much appreciated.
Function Vs Stored Procedure
May 1, 2004I know this is a stupid question (actually, maybe its not..?)
They seem to be identical in some ways, but not available to the outside world. what are some differences?
Function From Stored Procedure
Nov 22, 2007Hi Everyone,
i want to create a function in Stored procedure and then call this function
that returns true or false from a stored procedure .
is this possible?
please help me if you know something that can help me.
thanks
Tvin
When To Use A Function And When To Use A Stored Procedure.
Oct 28, 2006Hi,
I thought that procedures do not return a value: well they only return a 1 or 0 depending on whether the procedure executed correctly. Functions are what you're supposed to use when you want to get a result set of some sort: ie a table or a scalar value.
Apparently that is not the case becuase you can return values from procedures. I've attempted to find out what the differences are between the two and when it is appropriate to use a procedure and when it is appropriate to use a function but I'm still unsure. Can someone please tell me the difference.
Thanks.
Przemek
Differance Stored Procedure And Function
Nov 26, 2006hello
what is differance beetween stored-procedure and Function
when use of stored rpocedure and function
Call Function From Stored Procedure
Jan 19, 2007Hi All,
I'll admit that I'm not the greatest at stored procedure/functions but I want to learn as much as possible. So I have two questions:
1) I had VS2005 autogenerate a sqldatasource that created Select/Insert/Update stored procedures. When Updating a record and calling the stored procedure, I want to query another table (we'll call it tblBatchNo) that has only one record, Batchno. I want to put that current batchno into the Update statement and update the record with the current batchno. Can someone point me in the right direction? Remember that I'm still a beginner on this subject.
2) Can someone provide any links to online tutorials on t-sql?
Thanks in advance.
Curtis
Calling A Function From A Stored Procedure
Oct 26, 2007Hello all,
I'm trying to construct a select statement in a stored procedure that filters based on the returned values of a number of functions. My function works fine, but when I try to call the function from the stored procedure I get an error.
I'm going to try explain the thought process behind what I'm doing. Hope I make enough sense.The purpose of the stored procedure is to perform a wildcard search on a tool. The tool contains a number of FK that link to different tables (e.g., manufacturer, vendor). So I'm creating functions that also search the manufacturer and vendor and return the matching IDs.
Example of tool SELECT statement:SELECT tool_number, tool_description
FROM tool
WHERE tool_manufacturer IN (UDFmanufacturer_SearchName(@search_string)
This gives me an error:'UDFmanufacturer_SearchName' is not a recognized built-in function name.
Function code (removed some wrapping code for simplicity):SELECT manufacturer_id
FROM manufacturer
WHERE manufacturer_name LIKE '%' + @search_string + '%'These statements both work if I run a independent query: SELECT *
FROM UDFmanufacturer_SearchName('mol') SELECT *
FROM tool
WHERE tool_manufacturer IN (SELECT *FROM UDFmanufacturer_SearchName('mol')) This code fails:SELECT *
FROM ato_tool
WHERE ato_tool_manufacturer IN (UDFmanufacturer_SearchName('mol'))
I'm stuck. I haven't been able to find anything that shows me where I'm going wrong. Any thoughts or suggestions are appreciated. Thanks,Jay
Stored Procedure - Date Function
Jul 28, 2005Hi, I ran into some problem here. The case scenerio is supposed to be like this:
- Each member can only make one appointment at any one time and only
make another appointment after the existing appointment expired.
- Each member is allowed to make an appointment at any time and must be at least 5 days in advance.
I managed to do the reservation for at least 5 days in advance but I
can't allow the member to make only one appointment. The member can
keep making appointments even though the existing appointment has not
expired. Can someone pls help? Thanks!
ALTER PROCEDURE spReserveAppt(@AppDate DATETIME, @AppTime CHAR(4), @MemNRIC CHAR(9))
AS
BEGIN
IF NOT EXISTS(SELECT MemNRIC FROM DasMember WHERE MemNRIC = @MemNRIC)
RETURN -300
BEGIN
IF EXISTS
(SELECT COUNT(@MemNRIC)
FROM DasAppointment
WHERE (DATEDIFF(DAY, GETDATE(), @AppDate) < 5)
GROUP BY MemNRIC
HAVING COUNT(@MemNRIC) <> 0)
RETURN -301
ELSE IF EXISTS
(SELECT MemNRIC
FROM DasAppointment
WHERE (DATEDIFF(DAY, @AppDate ,GETDATE()) > GETDATE()))
RETURN -302
END
END
INSERT INTO DasAppointment(AppDate, AppTime, MemNRIC) VALUES (@AppDate, @AppTime, @MemNRIC)
IF @@ERROR <> 0
RETURN @@ERROR
RETURN
DECLARE @status int
EXEC @status = spReserveAppt '2005-08-16', '1900', 'S1256755J'
SELECT 'Status' = @status
How To Call A Function In Stored Procedure
Sep 12, 2012How to call a sql function in stored procedure using Sqlserver 2008?
View 4 Replies View RelatedRESOLVED: Stored Procedure Of Function?
Aug 16, 2006I have a select statement like this. Notice that I am doing the same calculation on different fields. Is it possible I can make this, in coding terms, a fucntion; so I can call it when I like (this query) and just provide the field.
Example: select field1, test_field = secs_to_hhmmss(TALK_TIME) from ...
SELECT dbo.date_table.real_date, dbo.time_table.hh,
COUNT(dbo.CALLDETAIL.id) as NumOfCalls,
TalkTime =
CASE WHEN CAST(SUM(TALK_TIME) AS INTEGER)/3600<10 THEN '0' ELSE '' END
+ RTRIM(CAST(SUM(TALK_TIME) AS INTEGER)/3600)
+ ':' + RIGHT('0'+RTRIM((CAST(SUM(TALK_TIME) AS INTEGER) % 3600) / 60),2)
+ ':' + RIGHT('0'+RTRIM((CAST(SUM(TALK_TIME) AS INTEGER) % 3600) % 60),2),
HoldTime =
CASE WHEN CAST(SUM(HOLD_TIME) AS INTEGER)/3600<10 THEN '0' ELSE '' END
+ RTRIM(CAST(SUM(HOLD_TIME) AS INTEGER)/3600)
+ ':' + RIGHT('0'+RTRIM((CAST(SUM(HOLD_TIME) AS INTEGER) % 3600) / 60),2)
+ ':' + RIGHT('0'+RTRIM((CAST(SUM(HOLD_TIME) AS INTEGER) % 3600) % 60),2),
ASP/SQL Stored Procedure/ASP Function Error
Jul 20, 2007Hey I have the following Stored Procedure
CREATE PROCEDURE spGetOrderCount
(
@search varchar(1000) = default
)
AS
SET NOCOUNT ON
/* Setup search string */
IF (@search <> '')
BEGIN
SET @search = 'WHERE' + @search
END
/* Create a temporary table */
CREATE TABLE #TempTable
(
row int IDENTITY,
totalCount int
)
/* Insert the search results into query */
EXEC
(
'INSERT INTO #TempTable([totalCount])' +
'SELECT COUNT(*) AS totalCount ' +
'FROM tblOrders' + @search
)
/* Extract the wanted records from the temporary table */
SELECT[totalCount],
RecordsLeft =
(
SELECT COUNT(*)
FROM #TempTable TI
)
FROM#TempTable
SET NOCOUNT OFF
RETURN
;
GO
And then the following function which specifies the where clause of the statement
function getOrderCount(strDate, strStatusList)
getOrderCount = 0
dim objRS, objSP, strWhereClause
if isDate(strDate) and len(strStatusList) > 0 then
'# Filter on order status
'# Filter on date clause
strWhereClause = "(tblOrders.orderDate >= " & sqlServerDate(strDate) & ")"
'#GET order count
Set objSP = SQLGetProcedure("spGetOrderCount")
SQLSetProcedureParam objSP, "search", strWhereClause
Set objRS = SQLExecuteProcedure(objSP)
if not objRS.eof then
getOrderCount = objRS("totalCount")
end if
'# Free resources
deleteRecordset(objRS)
deleteObject(objSP)
end if
end function
When I do this together I get the following error on my ASP Page
Microsoft OLE DB Provider for SQL Server error '80040e14'
Line 1: Incorrect syntax near '.'.
/sigma_eircommobdispatch/server/database.asp, line 235
And the print out of the resulting string from the function is
(tblOrders.orderDate >= CONVERT(DATETIME, '2007-7-13', 102))
If i remove the Where clause the statement works fine..
Any ideas
Use Function From Asp File In Stored Procedure
Jul 23, 2005Hello everybody,I have a file with several asp functions where some depend on others.Some of the functions I will need to transform a string value.How can I include these functions in a stored procedure? (in SqlServer 2000)Do I have to add all the functions as userdefined functions?Or is possible to reference the external file like include files inasp?Thank you for your help!Regards,Michael
View 3 Replies View RelatedUsing A Function To Pass A Parameter To A Stored Procedure
Apr 3, 2007In the snippet below, ExecuteSqlString is a stored procedure that accepts one parameter. SelectChangeDropdownRowsource is a function in my code behind page that generates the string I want to pass. I can't seem to find the correct syntax to get it to work. The way it is show below, the error comes back about incorrect syntax near ')' . Is this doable?
<asp:SqlDataSource ID="ChangeInfo" runat="server" ConnectionString="<%$ ConnectionStrings:xxx %>"
DataSourceMode="DataReader" ProviderName="<%$ ConnectionStrings:xxx %>"
SelectCommandType=StoredProcedure
SelectCommand="ExecuteSqlString">
<selectparameters>
<asp:parameter name="sqlString" Type=String DefaultValue=SelectChangeDropdownRowsource()/>
</selectparameters>
</asp:SqlDataSource>
User-Defined-Function With-in Stored-Procedure??
Apr 14, 2008Does MS-SQL allow us to create an user-defined function within the stored-procedure script? I have been getting errors. It's my first time using the user-defined function with stored-procedure. I welcome your help.
Code:
CREATE FUNCTION ftnVehicleYearFormattor (@sValue VARCHAR(2))
RETURNS VARCHAR(2)
AS
BEGIN
IF (LEN(@sValue) < 2)
SET @sValue = '0' + @sValue
RETURN @sValue
END
Thanks...
Maximum Stored Procedure, Function, Trigger, Or Vi
Mar 7, 2008HI ALL,
I AM USING SQL SERVER 2005.
I HAVE RETURN A RECURSIVE FUNCTION TO FIND OUT WHETHER THE NEXT DATE DOES NOT FALL WITHIN HOLIDAYS
BUT I AM GETING THIS ERROR
Maximum stored procedure, function, trigger, or view nesting level exceeded (limit 32).
THE CODE I USED IS
alter FUNCTION [dbo].[GetNextDay](@dt datetime , @empcode varchar(50) )
RETURNS datetime
AS
BEGIN
DECLARE @zoneid VARCHAR(50)
declare @lvlflag varchar(50)
declare @utdt DATETIME
DECLARE @RETDT DATETIME
DECLARE @COMPDT DATETIME
Select @lvlflag= b.ulm_user_field_flag from bbraun_emis.dbo.emp_reference a join bbraun_emis.dbo.user_lvl_master b on b.ulm_user_lvl_id = a.ER_USER_LVL and a.er_emp_code = @empcode
SELECT @zoneid = ZONECODE FROM bbraun_emis.dbo.VWREGIONLINK WHERE CITYCODE IN (SELECT DISTINCT HM_CITY_CODE FROM bbraun_emis.dbo.HOSP_MASTER WHERE HM_HOSP_CODE IN (SELECT HER_HOSP_CODE FROM bbraun_emis.dbo.HOSP_EMP_REL WHERE HER_EMP_CODE in(@EMPCODE)))
select @compdt = holiday_date from oriffconnect.dbo.holiday_master where zone_code = @zoneid and field_staff = @lvlflag and holiday_date = @dt
if(@@ROWCOUNT = 0)
begin
Select @utdt = DATEADD(dd,1,@utdt)
SeT @utdt = ([dbo].[GetNextDay](@utdt , @empcode))
end
IF(@@ROWCOUNT <> 0)
begin
set @utdt = @dt
end
Select @RETDT = @utdt
RETURN @RETDT
END
PLEASE HELP
Stored Procedure - User Defined Function.
Jul 20, 2005Hi.I'm really new to MSSQL, so therefore my question can sound stupid.Is it possible to use a function written in a module in MS-ACCESS in astored procedure?Or how can it be done, it is a complicated function with loop and more.I'll appreciate all answers also negatives ones.TIAJørn
View 1 Replies View RelatedHow To Use User Defined Function In Stored Procedure?
Mar 14, 2006Hello friends,
I want to use my user defined function in a stored procedure.
I have used it like ,
select statement where id = dbo.getid(1,1,'abc')
//dbo.getid is a user defined function.
procedure is created successfully but when i run it by exec procedurename parameter
I get error that says
"Cannot find either column "dbo" or the user-defined function or aggregate "dbo.getid", or the name is ambiguous."
Can any body help me?
Rgds,
Kiran.
Stored Procedure And Calling User Defined Function
Sep 29, 2007I seem to be getting tasks that I am not familiar with these days. I am a
guy that has coded it all in the asp page or in the code behind in .NET.
This problem is outlined below and I need a help / advice on doing this. I
had the flow of the 3 parts to it expanded below. A call is made to a Stored
Procedure, The SP then calls a user defined function that runs SQL, this
returns a 1 or 0 to the SP which then returns the value back to the call on
the asp page. This is a lot I know but it is the way the lead guy wants it
done. Any help so I can keep most of the hair I have left is appreciated :-)
Short list of process flow:
1. Form.asp calls to rx_sp_HasAccessToClient in SQL SERVER
2. rx_sp_HasAccessToClient then calls ab_HasAccessToClient
3. ab_HasAccessToClient runs SQL command on db and sends return bit back to
rx_sp_HasAccessToClient
4. rx_sp_HasAccessToClient then sends this back to the call in the Form.asp
page
5. Form.asp then checks the Boolean and if 1 then show or if 0 then deny.
<FLOW WITH CODE AND FUNCTIONS :>
This is not the correct syntax but is showing what I understand sort of how
this is to be done so far.
This panel loads up the Vendors and id's when the user clicks on the link
"view detailed list of vendors associated with this client". This is the
beginning of the process.
This is code in Form.asp
'PANEL ONE
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXX----
>
If ValidateInput(Request.Querystring("Postback"))="FormDetails" then 'Check
Postback Type
'We need to load up vendors associated with the current client.
'--------- CHECK ACCESS HERE via function ab_HasAccessToClient
--------
'If the call returns 1, then the employee has access.
'Otherwise, just write out "Access to this client is denied."
'CALL SP - Not sure what parameters need to go with it or its syntax
Execute_SP("rx_sp_HasAccessToClient '" & ClientSSN & "', 1)
'When it returns can check it here........
if ab_HasAccessToClient result is a 1 then
'boolean would be 1 so show panel
Else
'boolean would be 0 so show access denied
'allow them to go back to the original page.
end if
'PANEL ONE
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXX----
>
ON SQL SERVER: Stored Procedure
----------------------------------------------------------
--------------------------------
rx_sp_HasAccessToClient
CREATE PROCEDURE [dbo].[ rx_sp_HasAccessToClient]
@EmployeeID INT,
@ClientSSN varchar(50),
@ReturnBitValue = OUTPUT
/*
' Parameters here passed via call from Form.asp - not sure what is passed
yet.
*/
AS
set nocount on
/*
Written by Mike Belcher 9/27/2007 for Form.asp
'Calls ab_HasAccessToClient function - not sure of the syntax as of yet,
just making flow.
'Gets return bit and passes that back to the call from Form.asp
*/
GO
----------------------------------------------------------
--------------------------------
ON SQL SERVER: User-Defined Function
----------------------------------------------------------
--------------------------------
ab_HasAccessToClient
CREATE FUNCTION ab_HasAccessToClient (@employeeID INT, @ClientSSN
VARCHAR(50))
@ClientSSN varchar(50),
@EmployeeID,
@ReturnBitValue = OUTPUT
AS
SELECT 1
FROM tblEmployeesClients ec
INNER JOIN tblClients c ON ec.ClientID = c.ClientSSN
INNER JOIN tblEmployees e ON ec.Employee = e.EmployeeLogInName
WHERE e.EmployeeID= @EmployeeID
AND c.InActiveClient=0
AND c.ClientSSN = @ClientSSN
'Some Code here to save result bit ..
RETURN @ReturnBitValue 'Back to rx_sp_HasAccessToClient
----------------------------------------------------------
--------------------------------
</FLOW WITH CODE AND FUNCTIONS :>
Stored Procedure - Field Not In Aggregate Function Or Group By
Nov 29, 2011best solution for this stored procedure query.I'm getting the following error:
Column 'dbo.Applicants.submitted' is invalid in the select list because it is not contained in an aggregate function and there is no GROUP BY clause. Here is my select query:
Code:
SELECT DISTINCT DATENAME(MONTH, submitted) AS mon, MAX(submitted) AS SubmitDate
FROM dbo.Applicants
WHERE ((CASE WHEN MONTH(submitted) > 8 THEN YEAR(submitted) + 1 ELSE YEAR(submitted) END) = @AcYr)
ORDER BY SubmitDate
The submitted field is a date field.I don't want to add the submitted field to Group By as I want to group by month not date.Is there any solution to avoid grouping by date?
Stored Procedure And Calling User Defined Function
Sep 29, 2007I seem to be getting tasks that I am not familiar with these days. I am a
guy that has coded it all in the asp page or in the code behind in .NET.
This problem is outlined below and I need a help / advice on doing this. I
had the flow of the 3 parts to it expanded below. A call is made to a Stored
Procedure, The SP then calls a user defined function that runs SQL, this
returns a 1 or 0 to the SP which then returns the value back to the call on
the asp page. This is a lot I know but it is the way the lead guy wants it
done. Any help so I can keep most of the hair I have left is appreciated :-)
Short list of process flow:
1. Form.asp calls to rx_sp_HasAccessToClient in SQL SERVER
2. rx_sp_HasAccessToClient then calls ab_HasAccessToClient
3. ab_HasAccessToClient runs SQL command on db and sends return bit back to
rx_sp_HasAccessToClient
4. rx_sp_HasAccessToClient then sends this back to the call in the Form.asp
page
5. Form.asp then checks the Boolean and if 1 then show or if 0 then deny.
<FLOW WITH CODE AND FUNCTIONS :>
This is not the correct syntax but is showing what I understand sort of how
this is to be done so far.
This panel loads up the Vendors and id's when the user clicks on the link
"view detailed list of vendors associated with this client". This is the
beginning of the process.
This is code in Form.asp
'PANEL ONE
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXX----
>
If ValidateInput(Request.Querystring("Postback"))="Fo rmDetails" then 'Check
Postback Type
'We need to load up vendors associated with the current client.
'--------- CHECK ACCESS HERE via function ab_HasAccessToClient
--------
'If the call returns 1, then the employee has access.
'Otherwise, just write out "Access to this client is denied."
'CALL SP - Not sure what parameters need to go with it or its syntax
Execute_SP("rx_sp_HasAccessToClient '" & ClientSSN & "', 1)
'When it returns can check it here........
if ab_HasAccessToClient result is a 1 then
'boolean would be 1 so show panel
Else
'boolean would be 0 so show access denied
'allow them to go back to the original page.
end if
'PANEL ONE
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXX----
>
ON SQL SERVER: Stored Procedure
----------------------------------------------------------
--------------------------------
rx_sp_HasAccessToClient
CREATE PROCEDURE [dbo].[ rx_sp_HasAccessToClient]
@EmployeeID INT,
@ClientSSN varchar(50),
@ReturnBitValue = OUTPUT
/*
' Parameters here passed via call from Form.asp - not sure what is passed
yet.
*/
AS
set nocount on
/*
Written by Mike Belcher 9/27/2007 for Form.asp
'Calls ab_HasAccessToClient function - not sure of the syntax as of yet,
just making flow.
'Gets return bit and passes that back to the call from Form.asp
*/
GO
----------------------------------------------------------
--------------------------------
ON SQL SERVER: User-Defined Function
----------------------------------------------------------
--------------------------------
ab_HasAccessToClient
CREATE FUNCTION ab_HasAccessToClient (@employeeID INT, @ClientSSN
VARCHAR(50))
@ClientSSN varchar(50),
@EmployeeID,
@ReturnBitValue = OUTPUT
AS
SELECT 1
FROM tblEmployeesClients ec
INNER JOIN tblClients c ON ec.ClientID = c.ClientSSN
INNER JOIN tblEmployees e ON ec.Employee = e.EmployeeLogInName
WHERE e.EmployeeID= @EmployeeID
AND c.InActiveClient=0
AND c.ClientSSN = @ClientSSN
'Some Code here to save result bit ..
RETURN @ReturnBitValue 'Back to rx_sp_HasAccessToClient
----------------------------------------------------------
--------------------------------
</FLOW WITH CODE AND FUNCTIONS :>
Extended Stored Procedure Problem (srv_describe Function)...
Jul 20, 2005Hello all,I have spend quite some time now but don't manage tofind out how to have the srv_describe function workingproperly for target NUMERIC(x,x) and NUMERIC types.Already tried several alternatives like e.g.// ...PVOID pvdata1;strcpy((char*)pvdata1, "12345.6789");wsprintf(colname, "Score");srv_describe(srvproc, 1 /* column #1 */, colname /* column name */, SRV_NULLTERM /* column name ending */, SRVNUMERIC, (DBINT)sizeof(DBNUMERIC), SRVNUMERIC, (DBINT)sizeof(DBNUMERIC), pvdata1);srv_setcoldata(srvproc, 1, pvdata1);srv_setcollen (srvproc, 1, strlen((char*)pvdata1));// ...but obviously does not work, I get an empty resultset.I could only manage by converting the numeric valueto string from C and then sending only strings but theSQL side expects actually a number(x,x) and is a customer, in which case, I would never propose to be casting thething from TSQL.Any ideas how to do it? The documentation and examples isquite limited in this area.Thanks in advance,Best Regards,Giovanni
View 2 Replies View RelatedCalling User Defined Function From Stored Procedure
Jul 30, 2007When i call user defined function from stored procedure, i am getting an error.
[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid object name 'dbo.MyFunction'.
why this error is happening?.
i am calling this way... dbo.MyFunction(param1,param2)
SSIS-Use Stored Procedure/function As The Data Source
Jan 28, 2008
How do I use stored procedure or a user defined function as the data source in my SSIS package.
I am very new to SSIS.
Thanks
User Defined Function To Stored Procedure Call?
Apr 7, 2008Hello,
Can we call stored procedure from user defined function and vice-versa??
Thanks in advance.