Can any one tell me the difference between single value parameter and multi value parameter ? Also please explaing with some examples( not only with technical words)..
Thanks
hi everyone,
is that possible to access a table if the table is doing an insert command? im trying to insert data into a data while another function calling select statement on that same table. will the table be lock when its doing an insertion? or its free? sorry about the question structure.
cheers,
delete469
Has anyone managed to crack getting multi-select parameters to work from an SSRS 2005 report which is querying an SSAS 2000 cube.
SSRS 2005 does support Multiselect, however SSRS 2000 did not. Given that i am querying an SSAS 2000 cube, i get the impression that i am also limited to SSRS 2000 functionality regarding to multi-select parameters.
Is there anyone out there that ever managed to get a wor around, say by using filters on a table or anything really that coud simulate the same behaviour....
Hi,
I have a table VisitLog
pkey customer_id
pkey user_id
visit_date
visit_note
Given both id's, I need a report that will list the visit interval. Assuming the rows are entered in ordered.
the result should just display a single column with rows filled with date difference.
Date Format in example below is dd/MM/yyyy
1, 1, '01/01/07', null
1, 1, '03/01/07', null
1, 1, '08/01/07', null
The result should list difference in days.
2
5
Is it possible to do this in a SELECT Statement?
Thanks,
Max
I don't know the difference between parameters and variables in a stored procedure. How can I tell?
ALTER PROCEDURE [dbo].[spEdgeSalesDashBoad]
@x_strSessionGUIDVARCHAR(50),
@x_strStartofWeekVARCHAR(10),
@x_StartofMonthVARCHAR(10),
@x_strEndDateVARCHAR(10)
[Code] ......
Hi ,
Iam using sqlserver reporting services 2005 and in one case I need to find out the difference between two datetime parameters. I need the difference with the time. Can you please help me in this....
Thanks in advance...
I have a user login scenario where I would like to make sure that they not only exist in the user table, but also make sure there account is "verified" and "active". I'm trying to return 3 output parameters. UserID, verified, active. Is this possible?
Do I need just a select statement to do this? What is the difference between the output and select statements?
Thanks in advance.
Hi everyone, not sure if a this topic has been covered yet (a have been looking all day), but as I am still very new to this, my problem is as follows:
In the Try .. Catch block below, data is posted from a form and the SqlCommand.ExecuteScalar() statement returns a Unique Job ID.
I am attempting to populate a subordinate table for qualifications which are selected from a ListBox, but rather than using qualification titles, I am using the values.
My problem is that only one value (the first) gets posted multiple times, when multiple values are selected.
Looking at the For Each loop in the inner Try Catch block, I am wondering whether there is some sort of Index pointer that needs to be incremented, in order to establish new values further down the list.
I have seen no evidence that this is the case, save for the fact that the value stalls on just the first.
Any help would be appreciated.
===== CODE ===
Try
C4LConnection.Open()
JobPostingID = SqlJobPost.ExecuteScalar()Response.Write("<br />Selected Item: " & Qualifications.SelectedItem.Value)
Try
' Multiple Qualification EntriesSqlQualPost.Parameters.Add(New SqlParameter("@JobPostingID", SqlDbType.Int))
SqlQualPost.Parameters("@JobPostingID").Value = Int32.Parse(JobPostingID)SqlQualPost.Parameters.Add(New SqlParameter("@QualificationID", SqlDbType.Int))
SqlQualPost.Parameters("@QualificationID").Value = Int32.Parse(Qualifications.SelectedItem.Value)
If Qualifications.SelectedIndex > -1 ThenFor Each Item In Qualifications.Items
If Item.Selected ThenResponse.Write("<br />SelectedItem Value: " & Qualifications.SelectedItem.Text)
QualPostingID = SqlQualPost.ExecuteScalar()SqlQualPost.Parameters("@QualificationID").Value = Int32.Parse(Qualifications.SelectedItem.Value)
Response.Write("<br />Selected Item: " & Qualifications.SelectedItem.Value)
End If
Next
End IfCatch Exp As SqlException
failJobPost = True
lblError.Visible = TruelblError.Text = "Could not add qualifications <br />" & Exp.Message
End Try
failJobPost = FalseCatch Exp As SqlException
failJobPost = True
lblError.Visible = TruelblError.Text = "Error: could not post job to database <br />" & Exp.Message
Finally
C4LConnection.Close()
End Try
Help please! I have a problem with passing quotes in a parameter. I am using asp.net (vb) passing a parameter to a stored procedure.
Here is an example of the parameter I am passing from the asp page.
strIndexFilesFound = " 'file1.pdf', 'file2.pdf' "
.......Parameters("@IndexFilesFound").Value = strIndexFilesFound
And the Procedure parts
...
@IndexFilesFound char(100) = ''
....
WHERE IndexFile IN(@IndexFilesFound)
The result should be that the where query receives the data like this.
WHERE IndexFile IN ('file1.pdf', 'file2.pdf')
The number of files passed is unknown for any given query.
Much Thanks!
With the Synonym, I was encouraged to separate my db to several smaller dbs, like base,dynamic,static and security. Now I am trying to use mirroring, I see it may cause problem, I think I need mirror all them to another server. My question is when the server is down, will all db switch to mirror server in the same time? And one can manually set which db is the principal db, but in my case, it will not work if principal server of all four dbs are not the same.
Any thought?
thanks
I have a SQL query that goes like this
"select * from Product where ProductID in (1,2,3)"
How can i create a stored procedure where a single input parameter can take multiple values?
Can anyone help me with this?
i just can't find a way to perform this Select Query in my ASP.Net page. I just want to find out the sales for a certain period[startDate - endDate] for each Region that will be selected in the checkbox. Table Sales Fields: SalesID | RegionID | Date | Amount This is how the interface looks like.Thank You.
View 1 Replies View RelatedI have a query that will return one record as its results if you provide two variables: @login and @record_date. This works great if you only want one result. However, now what I want to do is not provide those variables and get the result set back for each login and record_date combination. The hitch is that there are several other variables that are built off of the two that are supplied. Here is the query:
DECLARE @login char(20), /*This sets the rep for the query.*/
@record_date datetime, /*This is the date that we want to run this for.*/
@RWPY decimal(18,2), /*This is the required wins per year.*/
@OCPW decimal(18,2), /*This is the opportunities closed per week.*/
@OACW decimal(18,2), /*This is opportunities advanced to close per week.*/
@TOC decimal(18,2), /*This is the total number of opportunities in close.*/
@OANW decimal(18,2), /*This is opportunities advanced to negotiate per week.*/
@TON decimal(18,2), /*This is the total number of opportunities in negotiate.*/
@OADW decimal(18,2), /*This is the opportunities advanced to demonstrate per week*/
@TOD decimal(18,2), /*This is the total number of opportunities in demonstrate.*/
@OAIW decimal(18,2), /*This is the opportunities advanced to interview per week.*/
@TOI decimal(18,2), /*This is the total number of opportunities in interview.*/
@OCW decimal(18,2), /*This is the opportunities created per week.*/
@TOA decimal(18,2) /*This is the total number of opportunities in approach.*/
SET @login = 'GREP'
SET @record_date = '12/18/2007'
SET @RWPY = (SELECT ((SELECT annual_quota FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)/(SELECT target_deal FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)))
SET @OCPW = (SELECT @RWPY/weeks FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @OACW = (SELECT @OCPW/cls_perc_adv FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @TOC = (SELECT @OACW*(cls_time/7) FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @OANW = (SELECT @OACW/neg_perc_adv FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @TON = (SELECT @OANW*(neg_time/7) FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @OADW = (SELECT @OANW/dem_perc_adv FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @TOD = (SELECT @OADW*(dem_time/7) FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @OAIW = (SELECT @OADW/int_perc_adv FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @TOI = (SELECT @OAIW*(int_time/7) FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @OCW = (SELECT @OAIW/app_perc_adv FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @TOA = (SELECT @OCW*(app_time/7) FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SELECT loginname,
CAST(@TOA AS decimal(18,1)) AS [Opps in Approach],
app_time AS [Approach Average Time],
app_perc_adv AS [Approach Perc Adv],
CAST(@TOI AS decimal(18,1)) AS [Opps in Interview],
int_time AS [Interview Average Time],
int_perc_adv AS [Interview Perc Adv],
CAST(@TOD AS decimal(18,1)) AS [Opps in Demonstrate],
dem_time AS [Demonstrate Average Time],
dem_perc_adv AS [Demonstrate Perc Adv],
CAST(@TON AS decimal(18,1)) AS [Opps in Negotiate],
neg_time AS [Negotiate Average Time],
neg_perc_adv AS [Negotiate Perc Adv],
CAST(@TOC AS decimal(18,1)) AS [Opps In Close],
cls_time AS [Close Average Time],
cls_perc_adv AS [Close Perc Adv]
FROM #pipelinehist
WHERE loginname = @login AND record_date = @record_date
Here is some sample data to use with this. With this sample data what I want to get back is a total of 30 records in the result set each with its data specific to the login and record_date of that returned record.
CREATE TABLE #pipelinehist (
glusftboid int IDENTITY(1,1) NOT NULL,
record_date datetime NOT NULL,
loginname char(20) NOT NULL,
app_new float NOT NULL,
app_time float NOT NULL,
app_perc_adv float NOT NULL,
int_time float NOT NULL,
int_perc_adv float NOT NULL,
dem_time float NOT NULL,
dem_perc_adv float NOT NULL,
neg_time float NOT NULL,
neg_perc_adv float NOT NULL,
cls_time float NOT NULL,
cls_perc_adv float NOT NULL,
target_deal money NOT NULL,
annual_quota money NOT NULL,
weeks int NOT NULL
) ON [PRIMARY]
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'AREP', 56.8, 26.9, 0.57, 29.5, 0.47, 20, 0.67, 80.7, 0.53, 2.1, 0.97, 2194.93, 575000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'BREP', 33.2, 0.5, 0.9, 7.7, 0.77, 8, 0.77, 9.2, 0.6, 7.7, 0.64, 971.1, 330000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'CREP', 210.2, 0.3, 0.87, 6.6, 0.5, 13.7, 0.4, 16.3, 0.43, 1.5, 0.91, 461.25, 330000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'DREP', 47.6, 5, 0.53, 33.3, 0.6, 57.5, 0.53, 50, 0.7, 1.5, 1, 2045.7, 575000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'EREP', 75.3, 110.9, 0.47, 36, 0.5, 17.4, 0.87, 20.3, 0.6, 7.2, 0.83, 2021.74, 775000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'FREP', 17.2, 23.3, 0.73, 6.8, 0.8, 6.3, 0.93, 29.7, 0.67, 15.5, 0.83, 2218.95, 575000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'GREP', 105.4, 67, 0.2, 32.9, 0.43, 18.5, 0.67, 8.9, 0.77, 3.5, 0.93, 1838.91, 400000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'HREP', 116.4, 118.5, 0.33, 30.9, 0.77, 46.3, 0.77, 46.3, 0.6, 0.9, 0.97, 1735.13, 1150000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'IREP', 143.3, 9, 0.77, 96, 0.17, 21.6, 0.77, 39.9, 0.43, 0.9, 0.93, 1385.43, 400000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'JREP', 179.4, 66.7, 0.7, 67.6, 0.1, 41.4, 0.6, 20.2, 0.8, 14, 0.7, 1563.76, 330000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'KREP', 107.6, 38.2, 0.23, 47.5, 0.47, 21.3, 0.77, 9.6, 0.73, 2.1, 0.83, 2120, 575000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'LREP', 18.6, 8.3, 0.87, 23.2, 0.57, 2.6, 0.87, 12.2, 0.67, 1, 1, 1229.02, 330000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'MREP', 4, 46.2, 0.6, 26.7, 0.57, 8.1, 0.87, 1.7, 0.9, 1.4, 1, 1091.22, 350000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'NREP', 54, 21.6, 0.57, 1.7, 0.77, 11, 0.8, 7.4, 0.9, 49, 0.47, 3240.68, 1300000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'OREP', 37.6, 24.4, 0.57, 50.1, 0.43, 6.7, 0.87, 15.6, 0.73, 0.9, 0.97, 1163.48, 330000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'AREP', 57.2, 32.5, 0.6, 29.5, 0.47, 20, 0.67, 85.6, 0.5, 2.1, 0.97, 2194.93, 575000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'BREP', 33.9, 0.5, 0.93, 7.8, 0.73, 8.3, 0.77, 9.2, 0.6, 7.7, 0.64, 971.1, 330000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'CREP', 152.1, 0, 0.87, 4.3, 0.67, 9.7, 0.47, 15.7, 0.47, 1.8, 0.85, 396.43, 330000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'DREP', 80.5, 9.8, 0.5, 40.7, 0.57, 68.3, 0.43, 64.2, 0.57, 1.5, 1, 2045.7, 575000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'EREP', 61, 92.1, 0.5, 31, 0.53, 16.9, 0.83, 17.7, 0.6, 7.3, 0.83, 2318.04, 775000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'FREP', 19.4, 21.1, 0.7, 5.3, 0.77, 2.2, 0.93, 33.3, 0.7, 9.7, 0.87, 1937.17, 575000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'GREP', 81.7, 40.5, 0.3, 33, 0.37, 18.5, 0.67, 8.9, 0.77, 3.5, 0.93, 1838.91, 400000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'HREP', 128.6, 115.7, 0.3, 30.9, 0.77, 46.3, 0.77, 48.8, 0.6, 0.9, 0.97, 1728.29, 1150000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'IREP', 100.9, 3.4, 0.77, 86.2, 0.27, 18, 0.8, 54.7, 0.37, 0.9, 0.93, 1385.43, 400000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'JREP', 179.4, 66.7, 0.7, 63.5, 0.1, 41.4, 0.6, 20.2, 0.8, 14, 0.7, 1563.76, 330000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'KREP', 285.2, 36.5, 0.1, 46, 0.43, 24.2, 0.73, 9.6, 0.73, 2.1, 0.83, 2120, 575000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'LREP', 17.6, 7.3, 0.9, 21.5, 0.57, 1.7, 0.87, 12.2, 0.67, 1, 1, 1250.54, 330000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'MREP', 26.7, 46.2, 0.6, 26.7, 0.57, 8.1, 0.87, 1.7, 0.9, 1.3, 1, 979.7, 350000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'NREP', 61.6, 20.8, 0.5, 1.7, 0.77, 11, 0.8, 7.4, 0.9, 49, 0.47, 3240.68, 1300000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'OREP', 31.6, 16.9, 0.63, 50.1, 0.43, 7.2, 0.87, 19.5, 0.7, 0.9, 0.97, 1303.48, 330000, 50)
Question is in the subject.
Thanks in advance
-Jamie
How can i combine my data in single row ? All data are in a single table sorted as employeeno, date
Code:
Employee No Date SALARY
1 10/30/2006 500
1 11/30/2006 1000
2 10/25/2006 800
3 10/26/2006 900
4 10/28/2006 1000
4 11/01/2006 8000
Should Appear
Code:
EmployeeNo Date1 OLDSALARY Date2 NEWSALARY
1 10/30/2006 500 11/30/2006 1000
2 10/25/2006 800
3 10/26/2006 900
4 10/28/2006 1000 11/01/2006 800
PLEASE HELP I REALLY NEED THE RIGHT QUERY FOR THIS OUTPUT.
THANKS IN ADVANCE
Hi all,
From the "How to Call a Parameterized Stored Procedure by Using ADO.NET and Visual Basic.NET" in http://support.microsft.com/kb/308049, I copied the following code to a project "pubsTestProc1.vb" of my VB 2005 Express Windows Application:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlDbType
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim PubsConn As SqlConnection = New SqlConnection("Data Source=.SQLEXPRESS;integrated security=sspi;" & "initial Catalog=pubs;")
Dim testCMD As SqlCommand = New SqlCommand("TestProcedure", PubsConn)
testCMD.CommandType = CommandType.StoredProcedure
Dim RetValue As SqlParameter = testCMD.Parameters.Add("RetValue", SqlDbType.Int)
RetValue.Direction = ParameterDirection.ReturnValue
Dim auIDIN As SqlParameter = testCMD.Parameters.Add("@au_idIN", SqlDbType.VarChar, 11)
auIDIN.Direction = ParameterDirection.Input
Dim NumTitles As SqlParameter = testCMD.Parameters.Add("@numtitlesout", SqlDbType.Int)
NumTitles.Direction = ParameterDirection.Output
auIDIN.Value = "213-46-8915"
PubsConn.Open()
Dim myReader As SqlDataReader = testCMD.ExecuteReader()
Console.WriteLine("Book Titles for this Author:")
Do While myReader.Read
Console.WriteLine("{0}", myReader.GetString(2))
Loop
myReader.Close()
Console.WriteLine("Return Value: " & (RetValue.Value))
Console.WriteLine("Number of Records: " & (NumTitles.Value))
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
The original article uses the code statements in pink for the Console Applcation of VB.NET. I do not know how to print out the output of ("Book Titles for this Author:"), ("{0}", myReader.GetString(2)), ("Return Value: " & (RetValue.Value)) and ("Number of Records: " & (NumTitles.Value)) in the Windows Application Form1 of my VB 2005 Express. Please help and advise.
Thanks in advance,
Scott Chang
I have a SSRS report with four parameters,and I want to be able to enter information for two of the parameters and run the report opposed to all four of them. However, when I select allow blanks and only select the parameters that I want to run the report by, the report come back blank..Essentially, I want to be able to the run report by different parameters without having to enter information for all parameters at the same time.
View 2 Replies View RelatedHi,
I have an app in C# that executes a query using SQLCommand and parameters and is taking too much time to execute.
I open a SQLProfiler and this is what I have :
exec sp_executesql N' SELECT TranDateTime ... WHERE CustomerId = @CustomerId',
N'@CustomerId nvarchar(4000)', @CustomerId = N'11111
I ran the same query directly from Query Analyzer and take the same amount of time to execute (about 8 seconds)
I decided to take the parameters out and concatenate the value and it takes less than 2 second to execute.
Here it comes the first question...
Why does using parameters takes way too much time more than not using parameters?
Then, I decided to move the query to a Stored Procedure and it executes in a snap too.
The only problem I have using a SP is that the query can receive more than 1 parameter and up to 5 parameters, which is easy to build in the application but not in the SP
I usually do it something like
(@CustomerId is null or CustomerId = @CustomerId) but it generate a table scan and with a table with a few mills of records is not a good idea to have such scan.
Is there a way to handle "dynamic parameters" in a efficient way???
Hello:
I just recently bumped into this problem and I think I know what's causing it. This is the setup:
Report Parameters: FromDate, ToDate, DivisionalOffice, Manager, SalesRep
dsCalendarEvents Parameters: FromDate.Value, ToDate.Value, DivisionalOffice.Value,
dsDivisions Parameters: N/A
dsManager Parameters: DivisionalOffice.Value
dsSalesRep: DivisionalOffice.Label
When I query the ReportServices WS and scan the parameter dependencies for SalesRep it says there are four dependencies: FromDate, ToDate, DivisionalOffice and Manager!!!
If I change "dsSalesRep" to use "DivisionalOffice.Value" the ReportingServices WS parameter dependency scan returns only one dependency for "SalesRep" parameter!!!( This is the correct behavior )
Has anybody seen this behavior and more importantly, is there a work around?
Regards,
Hello all,
Given:
string commandText = "Categories_Delete";SqlCommand myCommand = new SqlCommand(commandText, connection);myCommand.CommandType = CommandType.StoredProcedure;
Is there a reason NOT to use myCommand.Parameters.AddWithValue("@CategoryID",CategoryID); I'd prefer to use that over myCommand.Parameters.Add("@CategoryID", SqlDbType.Int, 4).Value = CategoryID; as I have these functions being created dynamically and hope to get away from a big lookup to try to convert System.Types into SqlDbTypes. [shudder]
It seems that ADO.NET makes an implicit conversion to the valid type. If this is correct then I can move on fat dumb and happy. Anyone have any good insight?
Thanks,
What is the difference between below? And how can I make GETDATE() the same as System.DateTime.Today.ToShortDateString()?
System.DateTime.Today.ToShortDateString()
and
GETDATE()
Hi all,
What is the difference between SQL Server 2000 & SQL Server 2005?
Thanks!
Can anybody tell me what is the difference between backing up database to a file and backing up to backup device.
Thanx in adv.
Hello,
I am transfereing Data into text format.
The datas are about 5 table and has almost 50000 to 2 million rows.
I am using the same query for BCP and DTS. But I find the dreference between those. I mean DTS is taking less memory and more time than BCP to complete the process .
Anybody can share any comment for this issue ?.
Can somebody tell or may refer to a site that show the differences between SQL Server 2000 SP2 and SP3a.
Thanks.
Is there really a difference of approach?
I have several things to consider in an estimating database. Production, Shipping, Field Work, Field Hardware, etc...
All of the above have account numbers. Now I was wondering, would there be any benifit to having one table or several tables?
One Table Example
Account (PK) | Category | Description
or
Multiple tables
tbProduction
Account (PK) | Description
tbShipping
Account (PK) | Description
tbProducts
Account (PK) | Description
etc.....
I like having the tables split up and/or all in one.
Any thoughts, pros / cons?
Mike B
What is the difference between stored procedure and functions ?
thanx in advance
Hi,
What is the difference between Inline-table value function and multi statement table value function?
Thanks In Advance
Hi Experts,
please tell me the difference between BCP and DTS
provide me links if possible.
thankyou very much
hello friends,
i've bee working in DTS just from 2 days.
i've one database like 'x' and now i've exported the data to a newly created database 'y'
but in this y database i got much memory like around 30 mb.
why this happend?
sorry if this is a small question.
thankyou friends
Hi
I want to know the difference between
SQL server Express and
SQL server 2005 Express Edition.
Thanks
Yimoot.
hi, i'm having difficulty figuring out how to implement a set difference between two queries. the only set operator i've been able to come across is union. thanks in advance!
d
Hi all,
May any one tell the differnce between t-sql Stored procedure and the same SP written in CLR compatible?.Will CLR SP really improve the performance?
Your response will be highly appreciated.
Thanks in advance