I would like know the different between Client component with server componet. I was trying to install SQL 2000 , then there was pop message that state the my os only only support client component. I would like to know why that so
thank u
please help me
Hello,
I have a package that has a data lfow task. this task imports data from a db2 database (using the IBM Ole DB provider fro db2) and adds it to sql server database table. This package was created on the server. then though version control (using TFS source control) I check out the package on my local machine. and when I open the package I get the foll 3 errors.
Error 1 Validation error. Import Account Num from BMGP_BDR: DTS.Pipeline: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Error 2 Error loading BMAG Download Xref Tables - bmag.dtsx: Microsoft.SqlServer.Dts.Pipeline.ComponentVersionMismatchException: The version of component "DataReader Source" (1113) is not compatible with this version of the DataFlow. [[The version or pipeline version or both for the specified component is higher than the current version. This package was probably created on a new version of DTS or the component than is installed on the current PC.]] at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostCheckAndPerformUpgrade(IDTSManagedComponentWrapper90 wrapper, Int32 lPipelineVersion)
Error 3 Error loading BMAG Download Xref Tables - bmag.dtsx: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Please advice.
Thank you.
Hi,
I have a package which reads an Access file from a folder. My connection manager to this file is .NET providers for OledbMicrosoft Jet 4.0 OLE DB Provider.
Package works from my computer. But when I execute it on the server as a SQL Agent job, I get
The component metadata for "component "DataReader Source" (1) could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
I copied the mdb file to a folder on the server which my packages have no problem reading data from.
My packages run under the same domain account as defined in proxies.
Appreciate a help.
Gulden
On Windows XP systems I get the following issue when trying to browse the MSDB folder in SSIS
Client unable to establish connection
Encryption not supported on SQL Server. (Microsoft SQL Native Client)
I have noticed another post where several others have noticed the same issue. It appears to only occur on Windows XP installations. Is there a workaround or fix for this?
In a Data Flow, I have the necessity to use a SSIS variable of type €œObject€? inside Script Component and assign to it the content of 'n' variables of string type.
On exiting from the script the variable of type object should contain something like in the following lines:
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
BBBBBBBBBBBBBBBBBBBBBBBBBBBBB
CCCCCCCCCCCCCCCCCCCCCCCCCCCCC
DDDDDDDDDDDDDDDDDDDDDDDDDDDDD
€¦€¦€¦€¦€¦€¦€¦.
€¦€¦€¦€¦€¦€¦€¦.
On exiting from the data flow I will use the variable of type Object in a Script Task, by reading each element in a cyclic fashion.
Is there anyone who have experienced something like this? Could anyone provide any example of that?
Thanks in advance!
Hi all
I'm into a project which uses a lot of views for joining 2 or more tables. Using the MERGE component in SSIS will be a huge effort coz it only has 2 inputs and I gotta SORT the input too.
Isnt it possible to have a VIEW like component that joins more than 2 tables and DOESNT need sorting??
(I've thought about creating views in database engine but it breaks my data floe in SSIS and is'nt a practical solution)
I am writing a custom dataflow transformation component and I need to get the name of the preceeding component.
I have been trying to find a way to get a reference to the Package object, MainPipe object or IDTSPath90 object (connecting to the IDTSInput90 of my component) from my component because I think from there I can get to the information I want.
Does anyone have any suggestions?
TIA . . . Ed
No idea where this bug crept in from. Have been using SSIS for 1.5 years now without hitting this problem.
I had a script component opening an XML document and parsing it using XPATH. I added some code that uses StreamReader / Streamwriter (closing one stream before starting the other). The code works without issue in my C# app.
And it ran without issue 2-3 times in SSIS. Then suddenly after running my package again, the script component says it completes successfully, yet nothing happens. I set a breakpoint on the first line of code - it never hits it. I add a msgbox as the first line of code - and it never displays.
I then close my package / exit out of ssis ... and then re-open it. When i open my script component, all of my code is GONE. All references that I added are gone.
I tried adding the streamreader/writer process to a dll I created from my c# app ... and added the DLL to the package -- same result.
I can reproduce this on 2 different computers.
Anyone experience this problem ? Any idea how to stop it ? Or debug it ?
Here is a slimmed down code sample of what causes the error :
Public Class ScriptMain
Public Sub Main()
Try
Dim xmlDoc As New XmlDocument
xmlDoc.Load("c:ulkasync_86281519_20070628045850225_4.xml")
MsgBox("xmlLoaded") --this doesn't display once the package starts "acting up"
Catch ex As Exception
MsgBox(ex.Message)
UpdateXML("c:ulkasync_86281519_20070628045850225_4.xml", ex.Message)
End Try
Dts.TaskResult = Dts.Results.Success
End Sub
Private Sub UpdateXML(ByVal fileName As String, ByVal message As String)
Try
Dim invalidChar As String = message.Trim().Substring(message.Trim().IndexOf("0x"), 4)
Dim rd As StreamReader = New StreamReader(fileName)
Dim xml As String = rd.ReadToEnd()
Xml = Xml.Replace(invalidChar, String.Empty)
xml = xml.Replace("", String.Empty)
xml = xml.Replace("<![CDATA[<![CDATA[", "<![CDATA[")
xml = xml.Replace("]]>]]>", "]]>")
MsgBox("replaced")
rd.Close()
Dim wr As StreamWriter = New StreamWriter(fileName)
wr.Write(xml)
wr.Close()
Dim xdoc As XmlDocument = New XmlDocument()
xdoc.Load(fileName)
Catch ex As Exception
UpdateXML(fileName, ex.Message)
End Try
End Sub
End Class
We have 15 clients running our applicaton
14 of then conected to SQL server using TCP/IP and it runs fine
1 of 15 when connected using TCP/IP produce "..Time out error "
but runs fine when swiched from TCP/IP to Named pipes
1.What area should we look to correct problem with Time out using TCP/IP ?
2. Where to get information about using TCP/IP via Named pipes ?
Product: Microsoft SQL Server 2005 -- Error 29515. SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][SQL Native Client]Encryption not supported on the client. Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
View 78 Replies View RelatedHi,
I have SQL2000 installed as the default instance, and now I'm trying to install SQL 2005 standard edition as a named instance.
I receive this error :
SQL Server could not connect to database service for server configuration.. [SQL Native client] Encryption not supported on the client. However I'm able to install client tools
The setup works fine on other box with the same config : SQL 2000/Windows XP, is there any work around for this issue ?
In my SQL 2000 client network utilty "Force proctocol encryption " is desabled and did not find the setting for SQL 2005 !
Thank you
Hello,Is it necessary to upgrade the Client Connectivity Tools on all clientmachines after the SQL Server database server is upgraded from Version7.0 to 2000?Thank you in advance!Eddy
View 1 Replies View RelatedПревед!Prompt me please some asp.net 1.1 pivote table component that can use both SQL Server database (SQL queries) and Analyse Services database (MDX queries).Thanks.
View 3 Replies View RelatedHi,
While using Sql Native Client ,VB Application giving error
"Transcation Cannot Start because more than one ODBC connection is in use"
But when useing SqlServer client then work perfectly ok.
Please guide where to use Sql Native Client.
Thanks
Rizwan
I have tried this on several different operating systems (VISTA and XP ) and several versions of SQL NATIVE CLIENT including 2005.90.3042.0
I have a 64 bit "SQL NATIVE CLIENT" connection that fails. The exact same connection and code succeeds on 32 bit.
My customer and I prepend "oledb:" to the connection string and it starts working.
FAILS on 64 bit:
Provider=SQLNCLI.1;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=Wrigley_Test;Data Source=MONGO;Use Procedure for Prepare=1;Auto Translate=True;Packet Size=4096;Workstation ID=RIPTIDE;Use Encryption for Data=False;Tag with column collation when possible=False;MARS Connection=False;DataTypeCompatibility=0;Trust Server Certificate=False
WORKS
oledb:Provider=SQLNCLI.1;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=Wrigley_Test;Data Source=MONGO;Use Procedure for Prepare=1;Auto Translate=True;Packet Size=4096;Workstation ID=RIPTIDE;Use Encryption for Data=False;Tag with column collation when possible=False;MARS Connection=False;DataTypeCompatibility=0;Trust Server Certificate=False
I debugged my code to the point that I know it is happening when I call CreateAccessor for my SQL statement.
m_hr=m_pIAccessor->CreateAccessor(DBACCESSOR_ROWDATA, GetCols(), (m_pDBBinds+IsBookmarked()), 0, &m_hAccessor, NULL);
Error:
Microsoft SQL Native Client: Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.
Does anyone have any suggestions?
hi geeks,
I need to build a generic text search component for MS SQL server 7.0. It is basically one of those Database searches that appear on web sites. Is there any stored procedure or service that MS SQL server provides for text based search on a database. Mind u my requirement is not to search a table but aan entire database....
anyone done this before.....
keep the faith
Deepesh
I am new to SQL server 2005
Windows 2003 Server and all client PCs are all on the same network. I installed SQL 2005 std version on windows server 2003 and created a database and tables in it.
I have two users, who want to connect to SQL server 2005 from their PCs (they have windows XP):
These are two things that I need to facilitate:
1) They want to be able to write queries using Query Designer and run from their PCs.
2) I created an MS Access database on my PC, I want to use Access database as a front end to the SQL server database. I will create queries, forms in Access DB, and I want to be able to get the data from SQL server Database to do this. I guess I can use ODBC to connect to tables in SQL server database.
3) I want to connect SQL server to Oracle database, and run oracle stored procedures. I want to load the results of oracle stored procedures into SQL server database tables. I guess I will use IIS for this.
Any suggestions are appreciated, especially with item number 1.
I am trying to install SQL Server Express - (the non ADV version) and get the following error.
"An installation package for the product Microsoft SQL Server Native Client cannot be found. Try the installation again using a valid copy of the installation package 'sqlncli_x64.msi'".
I have 64 bit Vista Ultimate running on an HP dv9000.
I am using the download from the bottom of the download page for SSX where it says 64 bit version.
Prior to this I got the. "64-bit ASP.net is registered. Required 32-bit ASP.NET to install Microsoft Reporting services 2005(32-bit)." messagd during the pre-install scan. From what I gather in the posts, the reporting issue is different from my installation package problem.
I have been trying to prove a point to friends about how far you can go with SSX but am having no luck installing it. This whole process took 1 hour in XP but I've been stymied for 2 days.
I would appreciate being pointed at the right downloads for what seems to be a simple install.
Hi,
I need to connect to a SQL server thats running in say abc.trident.com and also sits in a shared environment..
I have couple of questions
1) That SQL server is accessible from my network, yet when I swtich on my enterprise manager I am unable to view that in the list of running SQL servers in the populated list.
Is it because its sitting in a shared environment I am unable to view that?
2) What is the connection striing I should use to connect to the server..When I try to configure a SQL server registrations it normally asks for SQL Server name along with the user authentication
Should I mention fill the Server: field as
abc.trident.com
or
// abc.trident.com/abc.trident.com
to connect to the clustered server.
Can some one tell me the proper connection string if both aforementioned ones are incorrect?
Thanks in Advance
Hi there,
So, I have a Pivot component working just fine on our Dev server. You can put a datareader before and after it, and as expected, 2092 rows go in, 1890 rows come out, and they're pivoted just fine.
I deploy the package to our Live box, and it doesn't pivot the incoming dataset at all. The rows are just being passed straight through - it's as if the Pivot component is doing nothing. Put a datareader on, you can see 2092 in, 2092 out.
I know it's not the data - I reconfigured the connection manager to point to the dev dB, so it's using exactly the same source data set, and it still passes the rows straight through.
But here's the really wierd bit. If I modify the data source to just select 2 rows from the data source (which I know need pivoting on the pivot key), the component pivots them just fine. So I can see that technically, the component has been built correctly. It does what it is meant to do if I send through 2 rows, 4 rows, 8 rows. But when I send through 2092, it just passes them straight through.
Dev server:
Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 2)
Live server:
Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 2)
Any ideas anyone?
I haven't a clue which section to post this question in, so if it's in the wrong place i appologise.
My question is about Microsoft SQL server and Geospatial. I heard rumors about Microsoft added a Geospatial componet to sql server years ago in order to compete with Oracle. I have not hear anything more about this functionality and now our organzation is looking at going to Oracle because of our need for a Geospatial database. Ideally we would like to continue to use Microsoft products but we have not heard of anything that will meet our needs in this area.
Is there anything available right now?
Hello,
I have installed SQL server 2005 enterprise edition on Windows 2003 virtual PC (full installation). The installation went through successfully. However, after install completed, I cannot find any of the client tools under the start menu -> all programs -> Microsoft SQL server 2005 menu. The only item listed under the SQL server 2005 is Configuration Tools, which is used to configure the database server.
I have tried to install the client component again (in case I didn't install them at the first place) but the installation process cannot be started since it detected that the client components have been installed already. I can also see the sql server native client running in the services.
The server engine is working fine since I can connect to that sql server using another machine where I have the client tool (SQL server management studio).
One of my friends has exactly the same problem. He installed the sql server 2005 Standard edition on windows 2003 server (full installation), but the client tools are not showing up in the start menu either.
I also checked the location for the SQL server management studio (Microsoft SQL server/90/Tools/Binn/VSShell/Common7/IDE), there is only one folder called publicAssemblies listed under. Is this correct or something is missing?
Thanks
Hi,
Pls let me know if SQL Server 2005 Management Studio (client tools only) is compatible with Windows Server 2000 or not?
Thanks in advance.
Regards,
Bhuvana
Hello,This is hopefully just a quick question. I'm looking to re-jig our in-house development infrastructure and part of that will be some sort of SQL Server product, and I'm hoping it will be the Developer edition.My question is, how many copies of the Developer edition would I need to purchase, if I have one Windows 2003 server (which will server the databases) and two client machines which will use it.My initial thought is 2 copies, one for each user (as the license states). But what about the server? Do I just install one of the two copies onto the server and the license covers the two client connections?This might seem a silly question with an obvious answer to you guys. However, am I right? I just need to get this clear in my head.Thanks in advance..
View 2 Replies View RelatedHi
What is the ideal method that I can build client/server application by using IIS when I make my programme by using VB2005.net and SQL Server 2005 as database
thanks and waiting your replay
Hi
I am using sql server 2005 on my machine. But I have no idea whether I am using sql server or client on my machine.
Is there any way to see that
Regards
Karan
Newbie Question : Fair Warning ;>
Does SQL Server have a client tool similiar to Oracle's SQL Plus? If so, how do I set that up?
I have installed a desktop edition on my server, and I want to use some client to connect so that I can run queries from another machine. Am I set up correctly, or do I need to install the Enterprise edition on the server to do something like that.
I was thinking of writing a web-based client, but I can't seem to find the time. Plus, I wouldn't want to do that if a solution already exists.
Thanks in advance,
Tommy
Does any one know of any good components I can buy in to sit on top of my SQL Server to provide the kind of search functionality that google has - 'Did you mean...,' nearset match etc. I have set up SQL Server Full Text but to build all the extra functionality will take some time and I think it will be more cost effective to buy a component in. If any one has used any could you let me know of you experinces please. CheersScott
View 2 Replies View RelatedHow to install replication component for SQL server 2000 sp4? I would like to replicate datas between SQL2K and SQL CE 2.0/3.0
I update SQL server 2000 sp4 as the following sequence:
(1) install replication component for SQL server 2000 sp4
(2) install update package of SQL2000.MSDE-KB884525-SP4-x86-ENU.exe
(3) install update package of SQL2000-KB884525-SP4-x86-ENU.exe
(4) install update package of SQL2000.AS-KB884525-SP4-x86-ENU.exe
After that, I would like to add replication in the property page. But it failed and I was informed that €œI should cancel the registration of this SQL 2000 instance since it is a virtual instance such as . or local. I should register a real instance with local machine€™s name€?. What€™s wrong with it?
B.T.W:
(1)I install SQL server 2000 in virtual PC with XP/SP2.
(2) IIS is not installed on the virtual machine.
Hi,
A quick Q for all the Sql Server 2000 beta testers out there. Does anyone know of any problems associated with using SS2000 Enterprise Manager with a SS7 backend running SP2? In particular, I'm keen to try out the Tsql debugger features, if they'll work with SS7.
Many thanks in advance,
Jon Reade,
Sql Server 7 DBA
NEC Technologies (UK) Ltd
Telford, Shropshire.
I recently had configured my Web Server based on Windows 2003 Server and IIS 5x. I'd also installed SQL Server 2005 into this. Now I want toc onfigure this SQL Server, so that my client can access their database through a DNS name. I request you all for your kind support in this regard. Thanks in advance.
View 5 Replies View RelatedI recently have configured my Web Server based on Windows 2003 Server and IIS 5x. I'd also installed SQL Server 2005 into this. Now I want toc onfigure this SQL Server, so that my client can access their database through a DNS name. I request you all for your kind support in this regard. Thanks in advance.
View 1 Replies View RelatedI have recently configured a Web Server based on Windows 2003 Server and IIS 5x. I'd also installed SQL Server 2005 into this. Now I want toc onfigure this SQL Server, so that my client can access their database through a DNS name. I request you all for your kind support in this regard. Thanks in advance.
View 1 Replies View Related