On our SQL Server 2005 SP 2 i recently updated our Backup Plan.
I now make a Full backup every night, Differential backup every hour and Transaction log backup every 15 minutes.
This all works fine all the time except sometimes when the differential and transaction log backups want to run on the same time and then 1 of the 2 fails.
The error i get is code 0xC0010018. Error loading a task.
I made 1 Maintenance Plan with a subplan for each backup type (Full, differ....), so i can schedule them the way i want.
Searched the internet for an answer but i couldn't find it. The tasks only fail when the run simultaneous. Starting them manually always works.
Anybody has an idea what i need to do to get this working properly?
Thanks!!
Hello SQL Server 2005 SE sp1. Unable to take differential or transaction log backups. Get the error message a full backup need to be down. Have done a full backup. Immediately upon completion of full have tried diff and transaction log. Still no luck Other databases on server are fine. Full backup will restore.
I know that the differential backup will only back up information that was changed since the last full database backup, but I have process that I need to implement and need to know if differentials will work.
1. Perform full database backup on Sunday. 2. Perform differential backups Monday thru Friday (twice a day). 3. Perform a database restore on the following Sunday from the backup taken on the previous Sunday. 4. Perform differential backups Monday thru Friday.
At this point I would repeat steps 3 and 4 for the following weeks.
My question is this. Since I didn't actually perform a backup in step 3, but instead performed a database restore, will the differential backup in step 4 backup all of the information changed since step 1??..or will it backup all of the information changed since the restore in step 3? I'm hoping it will only back up the information changed since step 3.
I perform a full database backup at night with a differential backup at noon each day. I created 2 devices to do this. Northwind (for full backups) and northwind_diff (for diff backups).
When the differential is run, it appends each day's noon backup to the northwind_diff file so the file doesn't really reflect only changes - it just keeps growing and growing. I'm using the following syntax to perform the diff backup.
backup database northwind to northwind_diff with differential
Is there a way to initilize the backup device(file) prior to the differential backup being done?
I am using SQL 7 database maintenance plans to create full backups for all the databases on my server every night which expire after 7 days, and transaction log backups every hour on some of the databases which also expire after 7 days.
I want to add differential backups but the maintenance plan doesn't allow me to add those. How do I add them, and what naming conventions should I use? I want them to expire after 7 days, but want to backup every 4 hours.
Hi, is anyone using differential backups? I would like to have separate differential backups but right now it keeps appending to one big differential backup. If they are separated the older backups can be deleted. How do you do this?
I am setting up differential backups thru EM every 4 hours. I append to the existing file. Is there a way to tell it to delete the files older than 2 days thru EM. I looked at the job, there is now way to do this. Thru Mainplans you can create differential backups, it doesn't show you the option.. Any clues will be appreciated.
I did a few searches and found some interesting threads but was not able to understand much. :)
I recently jumped from support to a DBA position and am learning about SQL Server 2000.
My dilemma: We have a SQL 2000 server with about 500GB's worth of databases that has some jobs from the app locking up due to tape backups. I am performing Full nightly and 1/2hour transaction SQL backups. We run daily differential and weekly full tape backups. It is taking 14 hours to run tape backups daily, causing some of the application jobs to fail. So to test it, I stopped the tape job to run one night and none of the App jobs failed.
So, I am hoping that if I start running nightly differentials, weekly fulls, and 1/2 hour trans, it should work. However, I am not very familiar with Differential jobs as till today i have been using maintenance plans. :confused:
My ideal scenario is this: Differentials start on Sat morning and stop before the weekly backup runs on Friday and then delete the older file when starting a new one. Is this possible? how?
Can anybody explain why the size of a differential backup in SQL7 is MUCH higher than the one in SQL2000? Do this test yourself: do a full backup of the pubs database in SQL7 , it will be around 1.5mb, do a differential backup, and it will be 2mb or 4mb. If you do the same tests in SQL2000 the differential backup is around 200K. thanks
WE ARE DOWNLOADING THE BACKUP FILE FROM OTHER BRANCH OFFICE AND THE FILE SIZE IS GROWING LIKE HELL SO I AM CHANGING THE BACKUP POLICY TO DOWNLOAD THE DIFFERENTIAL BACKUP FILES EVERYDAY. BUT EVEN THE FILE SIZE GROWS DAY BY DAY UNTILL WE TAKE THE FULL BACKUP THERE. SO I WANT TO TAKE A DIIFERNETIAL BACKUP AND THEN IMMIDIATELY A FULL BACKUP AT THE REMOTE SERVER END. SO MY NEXT DIFFERNTIAL BACKUP WILL HAVE THE DATA OF ONLY PREVIOUS DAY. FOR THIS I AM SCHEDULING A JOB WHICH FIRST TAKES A DIFFERENTIAL BACKUP AND THEN IMMIDIATELY FULL BACKUP EVERYDAY AT 12.00AM. BUT I HAVE A CONCERN.. WHILE TAKING THE DIFFERENTIAL BACKUP ANY TRANSACTIONS THAT ARE TO BE COMMITED WILL NOT COMMIT UNTIL THE DIFFERENTIAL BACKUP COMPLETES. BUT IMMIDIATELY I AM STARTING FULL BACKUP. IS THERE ANY CHANCE THAT A TRANSACTION GETTING COMMITTED IN BETWEEN THESE TWO STEPS. IF SO IS THERE ANY WAY .. NOT RELEASE THE DATABASE UNTILL THESE 2 BACKUPS ARE COMPLETED?? I AM RUNNING IT AS A JOB.. ANY SUGGESTION??
I am trying to set up a process where a differential backup is taken daily and applied to another DB. For some reason I cannot get the diff backup to restore. The full DB backup restored fine.
Server: Msg 3136, Level 16, State 1, Line 4 Cannot apply the differential backup on device 'diff' to database 'test'. Server: Msg 3013, Level 16, State 1, Line 4 Backup or restore operation terminating abnormally.
Our production backup schedule is, FULL backup once a month and a DIFFERENTIAL backup every day.
We are starting the FULL and DIFFERENTIAL backups using something similar to
FULL Backup backup database @DB to disk = @BackupFile
DIFFERENTIAL backup backup database @DB to disk = @BackupFile WITH DIFFERENTIAL
A full backup was done on 10/6 and the DB size was 48GB. Since then we have been doing DIFFERENTIAL backups. I recently looked at the DIFFERENTIAL backup directory and found something I think is interesting.
10/07/2005 04:00 AM 8,604,160 prodDB_Diff_200510070400.BAK 10/08/2005 04:00 AM 1,144,320 prodDB_Diff_200510080400.BAK 10/09/2005 04:00 AM 1,134,080 prodDB_Diff_200510090400.BAK 10/10/2005 04:00 AM 21,185,024 prodDB_Diff_200510100400.BAK 10/11/2005 04:00 AM 7,119,360 prodDB_Diff_200510110400.BAK 10/12/2005 04:00 AM 163,669,504 prodDB_Diff_200510120400.BAK 10/13/2005 04:00 AM 14,743,040 prodDB_Diff_200510130400.BAK 10/14/2005 04:00 AM 120,875,520 prodDB_Diff_200510140400.BAK 10/15/2005 04:00 AM 1,216,000 prodDB_Diff_200510150400.BAK 10/16/2005 04:00 AM 5,139,968 prodDB_Diff_200510160400.BAK 10/17/2005 04:00 AM 4,277,760 prodDB_Diff_200510170400.BAK 10/18/2005 04:00 AM 2,778,624 prodDB_Diff_200510180400.BAK 10/19/2005 04:01 AM 750,575,104 prodDB_Diff_200510190400.BAK
My understanding of DIFFERENTIAL backups from books online is "Specifies the database or file backup should consist only of the portions of the database or file changed since the last full backup"
MY Question: Assuming I am understanding this correctly, all DIFFERENTIAL backups are independent of one another. If a failure happens, all I have to do is restore the latest FULL backup and then restore the latest DIFFERENTIAL backup.
So, I would think the sizes of the backup files should be in ASCENDING order. Why is the size of the backup file from 10/15/2005 (1,216,000 bytes) smaller than the backup file from 10/14/2005 (120,875,520 bytes).
Assuming a crash happens on 10/15 5AM, I would restore the full backup from 10/6 and then restore the DIFF. backup from 10/15 4AM (Which will apply approx.. 1,216,000 bytes of data). So where has the data in the backup file from 10/14/2005 gone (120,875,520 bytes)?
Does the full and differential backups have to be in the same location or can I do a once a week full backup on one drive and everyday differential backups on a different drive?
I am using Ola Hallegren's scripts to do backups. He uses @Cleanup Time to delete backups older than a certain number of hours. My situation is I do a full backup of a database on Sunday and then I have a few Differentials and then log backups for the rest of the week. When Sunday rolls around again and my full backup is finished, I would like to delete all the differential backups and log backups. Any way that I could accomplish this using Ola's scripts?
Hi sql server experts. This is a beginners question.
Let's say, I run a full backup at 4:30 am it takes usually 35 minutes to finish.
I want to schedule a differential backup to run every hour.
Should I start this job at 5:10 after the full backup finishes? or it doesn't matter? I am confused about timing.
Let's say my full back up takes 1 hour to finish, that means that when the differential backup runs the full backup will be still running, so in case I need to restore the database, can I use this differential from 5:10 or the differential from 6:10.
Same issue with the transactional, the job runs every 30 minutes, should I started after the differential is done?
I am so confused, what happens with the backups jobs that run while other backups are running?
We have a SQL 2K5 10GB database that, as part of the recovery plan, gets a differential backup every six hours. Log file backups occur every hour, and a full backup is done every 24 hours. Over the weekend, the differential backup produced a 55GB backup file which caused us a lot of issues besides disk space usage (log backups couldnt finish, mirroring broke, etc.). This is also the max growth size that the log file is set to. There are no errors in the ERRORLOG, or in the job history. It's as if the backup was successful, which I assume it was, but the file was sparse.
I should mention that our full backup is typically 10GB, log file backups are typically 100 to 500MB, and the diff backup is generally 1GB to 3GB.
Has anyone experienced this issue before? What causes it? How do we resolve it?
I have full backups scheduled weekly, differentails scheduled daily and tran log ackups scheduled for every 15 minutes.
The tran log backups only work for the first 40 minutes or so after the daily backup. Once the daily has occured, the tran backups will work again, but for only 40 minutes.
I run consistency checks on the db daily and there are no errors.
The error returned from the tran log backup is 'BACKUP LOG cannot be performed because there is no current database backup'
The space allocated to the Log in question is 180 GB. During this time period I was running TLog backups every 5 minutes, yet the log continued to chew through to 80 GB used, even after the process was complete and a final TLog backup had been taken. It continued to stay very large until the Full backup was complete -- or something else that I'm unaware of completed. Like every other DBA I typically take a TLog backup to shrink the log, but what appeared to be the case here was the Full completed and it released the used log space. All said, will Transaction Log backups not free up the log during Full backups?
We are running a SQL Server 2008R2 64-bit database system on a Windows 2012 R2 64-bit Standard system. I have noticed in recent weeks that our differential backups periodically are taking longer than expected to complete. The usual amount of time is about one hour, but on several occasions, it has taken upwards to five hours. The nights when the job takes longer to complete are on Friday.
I did some checking online, and one possible reason for this issue is my scheduling the reindexing of the database on the morning of the Differential backup. For example, this past Friday the reindexing occurred at 1:00 AM with the Differential running at 10:00 PM that night.The article that I read suggested the reindexing, which takes several minutes, if that, to complete, should be scheduled to run just before the Full backup job.
I need to make sure that my databases are backed up every hour so they can be recovered. What should I be doing? Transaction log backups every hour or differental backups every hour? I assume differental is better because it is cumlative, but would take up more space. Also, how long are they worth keeping around. I was thing for a day until the next full backup is run. Any thoughts?
I am doing a differential backup every night with t-log backups every 15 mins. The differential backup occurs at 3:00a and is about 300 MB. The very next t-log backup at 3:15a is also about 300 MB instead of the usual 1 - 2 MB. Why is this and how can I avoid it? Is this just how SQL Server works? Do I have to do a full backup every night instead? Thanks in advance for your help.
Using Ola Hallengren's scripts I do a full backup of a database on a Sunday. Then differential backups every 6 hours and log backups every hour. I would like to keep a full week of backups based off the full backup done on Sunday. Is there a way for me to clear out the diff and log folders after the successful full backup on Sunday nights?
I setup a maintenance plan to create full backups every night and to backup the transaction logs every hour. In the backup log, it always fails on backing up the transaction log for Master and MSDB. I believe this is because the recovery model for these two databases is set to "SIMPLE". Is it ok to change the recovery model on these two system databases to "FULL"?
I am trying to create a backup for the transaction logs on one of the databases I support. The problem is in EM, the only options it gives me are a Full DB Backup or a Differential DB Backup. I have other DB's with TL backup's, why can't I on this particular one?
I have 5 databases on my sql server and they are taking backups on everyday twice. ANd we are not taking any transactional log backups.Now i have very larger log files which are more than 6 GB each.And the databases are less in size compared to the logfiles. Should I take transaction log backups with truncate option... PLease suggest me the best stratagy i should follow to overcome the problem. Thanks.
Yesterday I received a message from the Trans Log backup job that it could not complete because a full backup wasn't completed. I checked and a full backup was completed that morning 5:00 AM. This happened during the 4 PM run and again at 5 PM. There was enough space to do the backup, even though I did a shrink file on the log. I, also, ran another backup between 5-6 PM. Between both of these activities, the job completed during the 6 PM run. Is this a common occurance? Has anyone else seen this happen. I am curious. Any light that can be shed on this, would be greatlt appreciated. Tom.
I have a backup regime where i take a full backup of my production database once a day and then 3 min log backups, I backup my msdb and master once a week.
I need to write a script to scroll through a given directory and restore the log backups in date/time order(with no restore) until the last file and then restore.
I know this is availible in the backup history but if my SQl box crashes and i cant get a uptodate master and msdb the backup history will not be uptodate to restore the database to it's current state.
Can anybody help with a script? or give me any pointers of how to read in filenames in SQL (please remenber i am a SQL virgin).
I created a backup plan for transaction logs only to run every 30 minutes. It works great for all databases except the Master and my main database scdb_v2.
The routine backups up the other 3 databases with no issue.
Using SQL Server 6.5 and NT 4.0,..I'm trying to schedule a backup of a transaction log from one SQL Server to another SQL Server both running NT 4.0. I keep getting:
dbsvolopen:Backup device t:ackup emote.dat failed to open, operating system error =5 (Access denied)
I've checked every conceivable permissions entry on the target NT server and am now reading about the different security modes for communicating between SQL Servers but I'm concerned that this may not be where the problem really resides. Time is money.
Has anyone else configured a backup strategy where the database has a full backup to tape daily and the transaction log is backed up every couple of hours, without truncatre, to disk, on another SQL Server?
The Transaction log backups that I do for the msdb and master databases ALWAYS fail. The full database backups always succeed. Are the master and msdb databases not supposed to have their transaction logs backed up? Jobs where configured thru the Database Maintenance wizard. Will the jobs fail if nothing has changed in either database? I am also confused by the fact that database and log backups for the model database ALWAYS work when I expect their to be little if none activity in that database.
We are running SQL Server 2000 and making full database backups using a maintenance plan. The transaction logs are being backed up via a separate plan.
However, the transaction log backups aren't purging but the database ones are. They are both run under the same id and both write to the same directory. Old text reports also get purged fine. I've got 'Delete older than 1 week' ticked for everything.
Can anyone think of anything else to check ? Thanks
New to Sql Server, running SQL Server 2000.Our transaction log file backups occasionally fail as the size of thetransaction log gets really huge. We'd like to schedule additionaltransaction log backups. Does that require an exclusive on the databaseor can the db be used during a transaction log backup?Also, does switching to a bulk mode recovery model before a bulkoperation then switching back to full recovery mode after present anyissues?Thanks in advance.
