Disable Triggers For A Single Process
Jun 21, 2007
I am writing an adapter for a two way integration between two databases. The table I am currently working on has an update and insert trigger to send data to the other database via service broker.
Asd I insert/update data via my adapter I don't want the triggers to fire but I do want them to fire if somebody else make data modifications while I am working with the table.
I am doing all mu modifications within a transaction but I found I couldn't disable the trigger within a stored procedure to keep the disable and enable as close together as possible.
Does anybody ahve any ideas how to overcome this scenario or am I worrying about nothing as my transaction will keep other users from modifying the data until I've finished.
Any advice would be great.
Cheers
View 4 Replies
ADVERTISEMENT
Nov 21, 2001
I don't seem to be able to find a command to disable triggers. Can this
be done in SQL7?
Thanks.
View 1 Replies
View Related
Nov 30, 2004
Hey folks,
Here's the skinny
I'm trying to run a stored procedure that requires triggers to be disabled in a table.
When I run the stored procedure (from the app or from the query analyzer) it works fine cause I'm setup as the owner/admin.
However, when users call the stored procedure from the application it gets executed as public which does not have alter persmissions.
I do not want to give alter permissions to public (for obvious reasons).
I was thinking of using SETUSER and SETOWNER but I don't know if it will work (I think because I cannot upgrade permissions using these just change to user of equal or lesser permissions).
Someone had mentioned to me to create a sysadmin user and just SETUSER to that then set it back to public, but again not sure if this will work because public has less permissions than the sysadmin.
I would like to have more info before I try this out and give it back to the client for testing.
Not sure if any of this will work for me, please help.
Thank you for your time.
By the way, I'm using SQL2000
View 2 Replies
View Related
Jun 9, 2008
Hi
So, I know, after searching these forums, that it is possible to disable a trigger before updating a table and then enabling it again afterwords, for instance, from a stored procedure.
I might be dealing with hypotheticals here, but when I do a ...
ALTER TABLE table
{ ENABLE | DISABLE } TRIGGER
{ ALL | trigger_name [ ,...n ] }
... from a stored procedure, will it not be database wide?
Should I worry about another change to the table happening in the timespan in which the trigger is disabled (which it would be for during a single update), which the trigger should have caught?
Regards, Egil.
View 1 Replies
View Related
Feb 6, 2006
Hi,
I am looking to track any changes made to any table within a db into a single audit table which will hold as fields: the table that has been updated/inserted, the field that was changed, its primary key, the old value and the new value specific to that field, and the date it was updated/inserted.
From what I have read, it does not look like this is possible with a trigger on table as it is not row specific and that I might have to control this from the business layer (vb.net). I am correct in this assumption, or is there a way of tracking specific data changes through triggers.
thanks
Welly
View 5 Replies
View Related
May 29, 2008
I have a need to process a single dimension at different points throughout the day. The rest of the cube is static and processed completely everynight.
I believe I can process just the single dimension via SSIS (have not verified this) but I was wondering if there is script I can run via an agent job cause I need to do this on 4 servers.
Any help/guidence is greatly appriciated.
View 4 Replies
View Related
Jul 21, 2006
We have a scenarion in a batch job. There are 3 sp's which are executed for every record in a table. After the execution of first sp the second sp executes depending upon the result of first sp. Simillarly for 2nd and 3rd sp.
Now if any sp execution fails than the whole transaction for that record in the table has to be rolled back.
Can this whole process of executing the multplie sp's insides a single transaction be accomplished using service broker with either a single queue or multiple queues?
sp 1 (1 record)
__________ l_____________
l l l sp2 ( 3 records for 1 record in sp1)
Simillalry for the one record in sp2, sp3 executes for multiple records.
Or in other words if processing of any message in a queue fails all the messages that have been processed already shoould be rolled back and no further execution should happen?
Also i would like to know can a conversation group be rolled back if processing of any message in the conversation group fails. I am asking this as we can club sp2 and sp3 together to get the results directly and than try for parallel processing.
P.S. We have a multiprocessor 64 bit server.
thanks
View 1 Replies
View Related
Mar 6, 2008
I have over 500 transaction records in a single DB process handling within SQL transaction (Begin, Commit, RollBack and End).
Is there any limitation for the following rollbacktransaction function to handle more records (eg. over 500 records)? Public Shared Sub RollBackTransaction()
Dim transactionObj As Object
Try
transactionObj = SqlTransaction.GetExistingTransaction
If (Not IsNothing(transactionObj)) Then
CType(transactionObj, SqlTransaction).RollBack()
End If
Catch ex As Exception
Throw New Exception(ex.Message)
End Try
End Sub
View 2 Replies
View Related
Oct 3, 2007
I've a weird problem in my application. In of the pages, while trying to update the text box "Name", when I enter Linda's test, it gets saved as Linda''s test. I'm not sure if this is a problem due to SQL server. When I look at the stored procedure, I don't anything different. Also, when I update the table directly in SQL Server, the result is displayed in single quote. But if I update the field thro' the application, the returned name is with double quotes instead of single quote. Has any of you faced problems like this? What am I missing? What do I need to do to get the name saved the way I entered (with single quotes) instead of double quotes?
View 1 Replies
View Related
May 12, 2008
This isn€™t an problem as such, it€™s more of a debate.
If a table needs a number of update triggers which do differing tasks, should these triggers be separated out or encapsulated into one all encompassing trigger. Speaking in terms of performance, it doesn€™t make much of an improvement doing either depending upon the tasks performed. I was wondering in terms of maintenance and best practice etc. My view is that if the triggers do totally differing tasks they should be a trigger each on their own.
www.handleysonline.com
View 12 Replies
View Related
Nov 14, 2007
Hi,
I was trying to extract data from the source server using OLEDB Source and SQL Server Destination when i encountered this error:
"Transaction (Process ID 135) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
What must be done so that even if the table being queried is locked, i wouldn't experience any deadlock?
cherriesh
View 4 Replies
View Related
Dec 3, 2007
Hello all,
I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.
So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with
FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation.
and it also logs
FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).
I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone.
As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.
Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.
View 13 Replies
View Related
Mar 11, 2008
Dear list
Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task
D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log
the above dos cmd works 100%
However when I use the Execute Process Task I get this error
[Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles
User::gsPreplogInput = ex.log
User::gsPreplogOutput = out.log
Here are the task properties
RequireFullFileName = True
Executable = D:SSIS ProcessPrepweblogProcessLoadpreplog.exe
Arguments =
WorkingDirectory = D:SSIS ProcessPrepweblogProcessLoad
StandardInputVariable = User::gsPreplogInput
StandardOutputVariable = User::gsPreplogOutput
StandardErrorVariable =
FailTaskIfReturnCodeIsNotSuccessValue = True
SuccessValue = 0
TimeOut = 0
thanks in advance
Dave
View 1 Replies
View Related
Jan 30, 2007
How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
Thanks,
Monisha
View 1 Replies
View Related
Mar 20, 2008
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
WorkingDirectory : C:Program Files (x86)Microsoft SQL Server90COM
Executable : C:SQL_bat_FilesSQL5TC_CTIcustomer.bat
The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
Can anyone help ?
View 9 Replies
View Related
Aug 20, 2014
I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.
should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)
View 3 Replies
View Related
Feb 14, 2007
Hi Folks,
I am having this table locking issue that I need to start paying attention to as its getting more frequent.
The problem is that the data in the tables is live finance data that needs to be changed and viewed almost real time so what I have picked up so far is that using 'table Hints' may not be a good idea.
I have a guy at work telling me that introducing a data access layer is the only way to solve this, I am not convinced but havnt enough knowledge to back my own feeling up. (asp system not .net).
Thanks in advance
View 1 Replies
View Related
Jan 6, 2012
We are facing deadlock issue in our web application. The below message is coming:
> Session ID: pwdagc55bdps0q45q0j4ux55
> Location: xxx.xxx.xxx.xxx
> Error in: http://xxx.xxx.xxx.xxx:xxxx/Manhatta...Bar=&Mode=Edit
> Notes:
> Parameters:
> __EVENTTARGET:
> __EVENTARGUMENT:
[code].....
View 2 Replies
View Related
Feb 17, 2007
Hi,
I'm trying to upload the ASPNETDB.MDF file to a hosting server via FTP, and everytime when it was uploaded half way(40% or 50%)
I would get an error message saying:
"550 ASPNETDB.MDF: The process cannot access the file because it is being used by another process"
and then the upload failed.
I'm using SQL Express. Does anybody know what's the cause?
Thanks a lot
View 1 Replies
View Related
Nov 15, 2007
Hi. When I try to start a package manually clicking the Start Debugging button I get this after a little while:
Cannot process request because the process (3880) has exited. (Microsoft.DataTransformationServices.VsIntegration)
How can I prevent this from happening? This happens every time I want to start the package and
every time the process id is different. Here it is 3880.
Darek
View 13 Replies
View Related
Dec 20, 2006
select * from sysprocesses
How can I determine whether a process a system or user?
View 3 Replies
View Related
Oct 11, 2007
Hello,
I have had a full lock on my sql server and I have a few logs to found the origin of the lock.
I know the process at the head of the lock is the 55 process.
Here are the information I have on this process:
Spid 55 55
ecid 5 5
Ecid 0 0
ObjId 0 1784601646
IndId 0 0
Type DB PAG
Resource 1:1976242
Mode S IS
Status TransID GRANT GRANT
TransID 0 16980
TransUOW 00000000-0000-0000-0000-000000000000
00000000-0000-0000-0000-000000000000
lastwaittype PAGEIOLATCH_SH
CMD AWAITING COMMAND
Physycal id 1059
Login time 2007-07-05 04:29:53.873
nat address DFF06EBF974D
Wait type 0x0046
HostName .
BlkBy .
DBName grpprddb
CPUTime 54331
DiskIO 1059
ProgramName
Would someone know a way to identify the origin of the process 55?
I have already tried to execute the following request:
select * from SYSOBJECTS
where id=1784601646
But I have had no returns.
Regards,
Renaud
View 3 Replies
View Related
Aug 24, 2006
I have a File System Task Copy file operation to copy a file in an SSIS package. The package when scheduled as a job fails with the following error:
The process cannot access the file 'C:ETLConsignmentAppleAppleRawFile.txt' because it is being used by another process.".
However when I right click on the package and execute it manually from the Integration Services it runs successfully without any problem. I am not certain on how to resolve this issue any inputs will be much appreciated.
Thanks,
Monisha
View 19 Replies
View Related
Feb 6, 2008
Error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
When running two File System Tasks after each other, with the same file, the file is still locked when running the second task. Resulting in an error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
I found a workaround by addind a Execute Process Task before the second File System Task that pings to the localhost. This results in a 5 second delay, but there must be a better solution. Anyone?
View 9 Replies
View Related
Nov 23, 2006
While configuring log shipping using SQL 2000 Ent, the copy process failed with this message :
The process cannot access the file because it is being used by another process.
does anyone know what cause this ?
SAP R/3 is configured with the system, could this be the problem ?
View 3 Replies
View Related
Apr 4, 2006
How can i combine my data in single row ? All data are in a single table sorted as employeeno, date
Code:
Employee No Date SALARY
1 10/30/2006 500
1 11/30/2006 1000
2 10/25/2006 800
3 10/26/2006 900
4 10/28/2006 1000
4 11/01/2006 8000
Should Appear
Code:
EmployeeNo Date1 OLDSALARY Date2 NEWSALARY
1 10/30/2006 500 11/30/2006 1000
2 10/25/2006 800
3 10/26/2006 900
4 10/28/2006 1000 11/01/2006 800
PLEASE HELP I REALLY NEED THE RIGHT QUERY FOR THIS OUTPUT.
THANKS IN ADVANCE
View 3 Replies
View Related
Apr 7, 2008
i'm going nuts with SQL server notification thing. I have gone throigh this artical which tells how to set user http://www.codeproject.com/KB/database/SqlDependencyPermissions.aspx. This article show how to create new user and setup for sql server notification.But In my case user was alredy existing in database. which is very common senario in most cases. So i did following( check the SQL script below) but then i get this error
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)"
this my sql script
use [master]Go
-- Ensuring that Service Broker is enabled ALTER DATABASE [DatabaseName] SET ENABLE_BROKERGO
-- Switching to our databaseuse [DatabaseName]GO
CREATE SCHEMA schemaname AUTHORIZATION usernameGO
ALTER USER username WITH DEFAULT_SCHEMA = schemaname GO
/* * Creating two new roles. We're not going to set the necessary permissions * on the user-accounts, but we're going to set them on these two new roles. * At the end of this script, we're simply going to make our two users * members of these roles. */EXEC sp_addrole 'sql_dependency_subscriber' EXEC sp_addrole 'sql_dependency_starter'
-- Permissions needed for [sql_dependency_starter]GRANT CREATE PROCEDURE to [sql_dependency_starter] GRANT CREATE QUEUE to [sql_dependency_starter]GRANT CREATE SERVICE to [sql_dependency_starter]GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_starter] GRANT VIEW DEFINITION TO [sql_dependency_starter]
-- Permissions needed for [sql_dependency_subscriber] GRANT SELECT to [sql_dependency_subscriber] GRANT SUBSCRIBE QUERY NOTIFICATIONS TO [sql_dependency_subscriber] GRANT RECEIVE ON QueryNotificationErrorsQueue TO [sql_dependency_subscriber] GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_subscriber]
-- Making sure that my users are member of the correct role.EXEC sp_addrolemember 'sql_dependency_starter', 'username'EXEC sp_addrolemember 'sql_dependency_subscriber', 'username'
View 10 Replies
View Related
Mar 19, 2008
Hi I am using VWD 2008, SQL Express 2005, Reporting Services, Win-XP, IIS5Basically let's say I have 2 pages:Page1: has a SQLDataSource control that populates a GridView from a table from a database file myDB.mdf (no code behind)Page2: has a reportviewer control that show a report with data from the same table from myDB.mdf from the reportserver, (no code behind)I have attached myDB.mdf to the SQL Server Express using the SQL Server Management Studio Express.If I first open Page2 to display the ReportViewer it works ok. or using the Report ManagerNow this is the problem:If after that I try to open Page1 then a get an error message:Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'. Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'.Then I have to restart the SQL Server to fix it,Now I can open Page1 ok, but if after this I try to open Page2 (ReportViewer) againThen I get this error:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. &And this error if open the report using the report manager:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. § Unable to open the physical file "C:InetpubwwwrootWebsiteApp_DatamyDB.mdf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)". &Now if i check the Management Studio Express again, you can see that myDB.mdf was detached. It seems to be there by it has no Tables or definitions, so I have to attach it again..Do you know how to fix this?Thanks in advance,Ed
View 5 Replies
View Related
Jun 14, 2002
Is there a way to disable trigger for a time window and enable it when desired.
View 1 Replies
View Related
Jul 12, 2001
Is it possible to disable a trigger to manually manipulate data without completely removing it? Thank you.
View 2 Replies
View Related
Oct 26, 2000
A quick question, how can I disable identity for the identity column
without dropping that column? Thanks!
Xiao
View 1 Replies
View Related
Aug 28, 2000
Is there a way to disable logging ?
I'm about to split a 1000000 rows table into three other tables , and would prefere not to log this action ...
Does anyone know how to do it in a SQL 7.0 statement ?
View 1 Replies
View Related
May 11, 2001
Is it possible to disable a trigger in SQL Server 6.5?
Is so, how can i do that?
View 1 Replies
View Related
