Disabling The AUTOCOMMIT Option In MSSQLServer
Jun 8, 2006Hello,
Is there anyway.. we can disable AUTOCOMMIT option in MSSQL server
while executing the SQL queries via SQL ANALYZER
Hello,
Is there anyway.. we can disable AUTOCOMMIT option in MSSQL server
while executing the SQL queries via SQL ANALYZER
I want to know how to set not autocommit at SQL Server 6.5 database ?
Please Help
Hi,
What is the SQL Server equivalent for "set autocommit on" of Oracle ?
Thanks,
Sam
How do i find the current status of autocommit. whether it is set to ON or OFF.
Is there any way to check this out thru management studio ?
Hi:
The first stmts in
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/acdata/ac_8_md_06_35bq.asp are
"Autocommit mode is the default transaction management mode of Microsoft® SQL Server„¢. Every Transact-SQL statement is committed or rolled back when it completes."
"if a statement completes successfully, it is committed; if it encounters any error, it is rolled back. A SQL Server connection operates in autocommit mode whenever this default mode has not been overridden by either explicit or implicit transactions."
My question is, how do we change autocommit mode. I don't want the dml to be commited until i explicitly do commit. This should be default setting.
I want this change either to be made at database level, maybe by doing some setting or through some T-SQL stmt.
I DO NOT want to use anything that has to be done in query windows like set ... off | on in each and every query window i use.
The change has to be done only once and should persist through-out.
Any solution will be of help to me.
Thanking you,
Regards,
kumar
I€™m using triggers for some more advanced integrity check. The problems is that the same trigger can be run from explicit transaction (this is when I start transaction from .NET) and as autocommit transaction ( very rare, only when we do some maintenance directly with SQL statements).
Currently if I want to rollback transaction from trigger I only issue RAISERROR statements, then .NET application catches this error and generates rollback. But the problem is if trigger is raised from some SQL statements outside .NET application (normally some maintenance work direct from SQL manager ) in that case error is generated but there is no rollback.
Is there any way to distinguish if transaction in trigger is explicit or autocommited, because for autocommited transaction I also need use ROLLBACK TRANSACTION?
I€™m using SQL 2005!
Best regards
edvin
Hi everyone In my SqlServer Management Studio Express, on start up it shows the server type option, but greyed.So that value is fixed to database engine. ( I'm trying to work on an SqlServer Compact Edition database through the SSMStudiothat's why I'm trying to get this to change.)Besides, after I connect i go to the Object Explorer, expand the server node, and go to Replication.When i expand replication, i get the "Local Subscription" option, but nothng for Publication.( I want to work on Merge Replication, that's why I desparately need Publication to work)Am i missing something here? I did not install SqlServer separately, I only have what comes bundled with the Visual Studio 2005 Setup.
View 2 Replies View RelatedSo I started a new job recently and have noticed a few strange configurations. Typically I would never mess with min memory per query option and index create memory option configuration because i just haven't seen any need to. My typical thought is that if it isn't broke... They have been modified on every single server in my environment.
From Books Online:
• This option is an advanced option and should be changed only by an experienced database administrator or certified SQL Server technician.
• The index create memory option is self-configuring and usually works without requiring adjustment. However, if you experience difficulties creating indexes, consider increasing the value of this option from its run value.
Is it possible that I can't use microsoft SQL server under my windowsxp pro ? I checked the web site and it looks like it is notsupported.....
View 3 Replies View RelatedTo start a named instance of SQL Server
On the Start menu, point to All Programs, point to
Microsoft SQL Server 2005, point to Configuration Tools, and then
click SQL Server Configuration Manager.
In SQL Server Configuration Manager, expand Services, and
then click SQL Server (MSSQLSERVER).There is no MSSQLSERVER to click!!!!!!!!
I need to disable a trigger for a week w/o droping it. Is there a way in sql ?
Thanks and nice week-end.
Ivan
Please help if you can! I have setup a job that runs every day on an hourly basis. Every morning I find that it's been disabled. The funny thing is is that the schedule is disabled, but the job is not (you see 'Enabled' in the jobs list in EM, but when you view the schedules tab, it's disabled.) Also, it runs a several times before becoming disabled.
TIA,
Colleen
I have a server that was being used for logshipping and had
replication set up at some point as well. One of the databases got out
of sync in the logshipping process so I removed logshipping and was
going to reinitialize the database and set up the logshipping again.
The database is in read only mode and when I try to take it out of
read only I get the following message:
Error 5063: Database 'XXXXXXXX' is in warm standby. A warm stanby
database is read-only. ALTER DATABASE statment failed. sp_dboption
command failed.
I have tried to disable replication on the server but get the
following error message:
SQL Server Enterprise Manager could not disable 'SRVXXXX' as a
publisher.
Error 3906: Could not run BEGIN TRANSACTION in database 'XXXXXXX'
because the database is read only.
So my problem is that I can't take the database out of read-only mode
because of replication and I can't disable replication because the
database is in read-only mode.
Has anyone come across this before and how should I resolve it? I
tried dropping the database as well and that didn't work either.
Any ideas or help would be greatly appreciated.
Thanks in advance,
Brad
Hi,
I have a update trigger on a table. Can I disable this trigger for duration of a job which updates this table.
Thanks in advance ...j
Is there a way to disable a trigger when performing a transaction besides dropping and recreating the trigger? I am trying to perform an insert on a table, and this keeps firing a trigger that I want to disable.
Any help is appreciated.
I have accidentally registered an existing database as a distribution database, which made it a system database.
the data itself is safe and sound, but I want to undo the whole thing.
How can I do this?
I have an SQL job that runs a .vbs script. It has the following code:
Cmd2.ActiveConnection = Conn2
Cmd2.CommandText = "USE msdb EXEC sp_update_job @job_name = 'Email Download',@enabled = 0"
Cmd2.CommandType = 1
Cmd2.Execute()
It's not disabling the job. If I execute in Query Analyzer, it works. I'm thinking it might be a permissions issue. Any suggestions?
TIA
Hii have a table with primary key defined on col1 and col2. now i want tohave col3 also included in primary key. when i alter the table it givesme error for duplicate rows. there is an option for 'with nocheck' butit only works with check or foreign key constraint. is there any optionin sql server like in oracle 'no validate' which doesnt validate theexisting data and force the data validation from new records.thanxFarid*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 5 Replies View RelatedHi all,
1) Can anybody provide me the script for DISABLING all the jobs in the server and vice versa (i.e.) for enabling also.
2) Script for DISABLING LOGINS and script for ENABLING all Logins.
Its Sql Server 2005
Thanks... Any Help Greatly appreciated.
HI There
My activated proc is rolling back the transaction and putting the message abck on the queue infinately ?
Normally it disabled the queue after a few rollbacks, i can see in the sql log that it just keeps rolling back and re-activating thousands of times.
It only stops when i disable activation on the queue.
WHy is the queue not disabling ?
Thanx
I have an SSIS task that transforms 70 million rows of data nightly.
The data is dumped and imported fresh every day.
Obviously I don't want my production Transaction Log getting cluttered up with 70 million rows of transaction logs daily.
Is there any way to avoid logging to the transaction log with an SSIS task?
Hi,
Is there any way to disable/enable constraints on the table?
Command "ALTER TABLE table_name {CHECK|NOCHECK} CONSTRAINT ALL" produces error.
The Microsoft SQL Server icon is showing on my task bar but with a white (blank) circle "stamped" over the bottom right of the icon.
To me it seems that the implication is that somehow the server is not being recognized as (local)etSDK.
Resting the mouse arrow on the Server icon displays: unknown - \ - MSSQLServer
Needless to say something is quite wrong and I cannot open nor create ANY DATA while on WebMatrix.
If I right-click on the server icon and select "Start" I get the following error: "Invalid handle" which apparently is error number 6.
Previously, after many try-outs I managed to at least put the server icon on the task bar by making use of a setup.ini file that reads as shown below (and then typing from the MSDE sub directory while in MSDOS "setup.exe").
[Options]
INSTANCENAME=CADComputing
SECURITYMODE=SQL
SAPWD=myPassword539
Is there a way out of this mess?????
I am seeing a strange scenario in performance monitor that i am hoping someone could help shed some light on. I have a 8 processor box running only sql configured to utilize all processors. When watching the sqlservr process it seems to max out at times of high traffic. Does this not use all processors? Any know problems with this service maxing out?
Your assistance is appreciated,
David
MSSQLSERVER won't restart. I can't uninstall SS7, either, because it says I have MSSEARCH running, which Task Manager can't kill (access denied, even to me the administrator). Tried changing the registry keys for MSSQL to MSSQL_old and then the install goes forward but fails at the end because some of the TEMPDB files cannot be activated. This trick worked on my Win98SE once, for the same problem. I ignorantly deleted IE4 from the server's C:drive because I needed more room to reinstall. I tried reinstalling the SS7 "components" (no apparent problem, except it detects that I have now installed IE5.5)(IE5.5 automatically installs to C:Program FilesMicrosoft or thereabouts, not C: where IE4 was, by the way). I was up to SP2 on SS7, and SP6 on NT4. The name of the server hasn't changed, but the name of the c:drive is new. Why would a new install care? I ran scandisk inbetween reboots as a caution, but the install always fails. Should I be choosing the default "allow 5 connections" rather than "5 per computer licenses"? TIA, Jeb
View 2 Replies View RelatedI installed SQL server 2005 on a win2003 server box.
When I open the Connect to Server dialog box, I choose server type: Database Engine. There is no Servername listed, so I put in the name of the PC.
I get a long error message when I try to connect:
Cannot connect to PCName....
...error: 40 - Could not open a connection to SQL Server)...
When I try to go into the Surface area Configuration, I get this message:
"No sql server 2005 components were found on the specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLSAC)"
I am logged in as Administrator in the PC, so did I do something seriously wrong with the installation?
In the services window, I can not fine MSSQLserver (not sure if this is relevant).
regards,
Jozi68
Help! I just took over for a new company and after logging in to one of the servers I tried to click on the Symantec Backup Exec on the desktop. It failed and said that none of the services are started, looking in my services I can not get any of the services related to sql to start. In the bottom right hand corner in the system tray I have a red dot on the sql server and it is stopped. All the event logs say that: During redoing of a logged operation in database 'master', an error occurred at log record ID (199:200:5). Typically, the specific failure is previously logged as an error in the Windows Event Log service. Restore the database from a full backup, or repair the database.
Thanks
I installed a copy of SQL server 2005 on a Win 2003 machine. I connected remotely from another machine and started Sql Server Configuration manager. The MSSQLServer is stopped. So, I click to start and it failed. The error it gave me was that it time out. I am new to SQL 2005 and I thought the next step after installing was to configure. Can anyone help me please.
View 3 Replies View RelatedI want to disable foreign key constraints en mass. Is there a way to do this?
I know that I can go into each table and navigate to the Relationship tab of Properties and uncheck the "Enforce relationship for INSERTs and UPDATEs" box, but I'd much prefer to automate this process with a query since there are 160+ tables and probably 200+ relationships to disable.
I figure that sysconstraints my be the ticket, but I will keep experimenting until I get the right solution. In the meantime, any insight to steer me in the right direction is appreciated.
Hi,
I'm using DMO (SQLOLE65.dll) to programmatically replicate selected publications. The Publication object supports a property called Enabled, which can be set to FALSE. I'm setting the enabled property to TRUE for those publications that need be replicated, and make the others FALSE. Still, all publications get replicated. [I give DoAlter to commit the changes i made.]
Any solution,Please mail me ASAP to venkateswaranb@synectics.soft.net
Thanks,
Venkat
sql 2000, northwind databse
code in sql analyzer:
Code:
ALTER TABLE categories NOCHECK CONSTRAINT ALL
TRUNCATE TABLE categories
ALTER TABLE categories CHECK CONSTRAINT ALL
but still i am getting the error:
Quote: Server: Msg 4712, Level 16, State 1, Line 2
Cannot truncate table 'categories' because it is being referenced by a FOREIGN KEY constraint.
what i need to do is write a query that just cleans all the tables of all data.
In the process of doing some routine monitoring/clean-up we'vediscovered that several (many?) users are apparently set to access ourSQL Server 2000 database instances via the Named Pipes protocol. Inreadings and recommendations we've decided that our WAN would be bestserved if we use the less "chatty" TCP/IP.As such we've also decided to try to enforce this decision to useTCP/IP exclusively using the domain login script used by all of ourend-users.Question: does anyone know what registry entries are created/used toindicate that TCP/IP is enabled and is the default protocol for SQLServer 2000? Our environment is: XP Pro SP2 and SQL Server 2000(typically SP3).TIAGlenn - newbie DBA
View 5 Replies View RelatedHi all,
Here is my situation. I need to disable a task at runtime. I have a script task that configures a boolean variable at runtime and sets its value to either true or false based on a condition. And also i have already set "disable" property of the component to get value from the boolean variable. The problem here is that the component gets the default value which we give during variable creation instead of getting the configured value.
Am i missing out anything. thanks in advance.
Regards,
Praveen