I have data in rows that I need to aggregate and display in a columnar fashion and I haven't been able to figure out how to do it. A simplified version of the data as it is stored in the table:
Station Month Day Reading
1 1 1 100
1 1 2 200
1 1 3 300
1 2 1 400
1 2 2 500
And I would like to create a query that returns:
Station Month Day 1 Day 2 Day 3
1 1 100 200 300
1 2 400 500
Any help you can provide or tips to steer me in the right direction are much appreciated.
I need to make the automatic subtotal column in most right position in a matrix wider than the data columns , i faild so far and discovered that its width is proportional to the data column width , its logic for the total column to be wider since its value is sum(all left data columns)
I'd like to know if I can make one proc/cursor that I can pass only a table name and it will determine what cols exist in the table?
AND, what is the syntax for such a query?
I will be receiving data back where I will receive the accountID and only the deltas will have values all other columns will be null.
My proc will update an existing record, updating the specific col when an accountID exists, it will create a new record if the accountID does not exist.
I'd like to search all the cols getting their names and values when not null.
I can construct a proc for each table searching each col by known name.
However, I'd like to know if I can make one proc/cursor that I can pass only a table name and it will determine the cols?
All my tables start with cols AccountID and end with RecID with any number of cols inbetween.
TIA
JeffP... cross posted to ms.pub.mssqlserver.programming
I have about 30 tabs with same struture. I want to simple put column 2 in all 30 table in a new table without joining on anything. Is there a way to do that? Thanks JP
I have a table with 1 column containing numeric values, and I need to create a query which displays the count of values for each set of conditions. For example, if the table contains the values 1,2,3,4,5 and 6, the output of the query should look like this:
L M H ----------------------- 3 2 1
(L are values below 4, M between 4 and 5, H is 6 and above)
Hi I have a table which has couple of name cols and 10 varchar columns. The requirement was to retain the first two cols but convert the 10 cols into a single XMl.
and this query to convert all the varchar cols to a XML. Now the problem is I am not sure of how to combine both these queries to Insert into the new table.
With reference to http://www.intelligententerprise.com/001020/celko.jhtml?_requestid=235427 I want the "sql stmt" which wud give the lft and rgt col values..
i am reading his book but cant understand :eek: where he explains wat lft and rgt cols are..
"The root is always (lft,rgt) (1, 2*(Select count(*)from table) and leaft nodes are (lft+1=rgt)" :S
CREATE TABLE [RS_A] ([ColA] [varchar] (10)[ColB] [int] NULL)CREATE TABLE [RS_B] ([ColA] [varchar] (10)[ColB] [int] NULL)INSERT INTO RS_AVALUES ('hemingway' , 1)INSERT INTO RS_AVALUES ('vidal' , 2)INSERT INTO RS_AVALUES ('dickens' , 3)INSERT INTO RS_AVALUES ('rushdie' , 4)INSERT INTO RS_BVALUES ('hemingway' , 1)INSERT INTO RS_BVALUES ('vidal' , 2)I need to find all the rows in A which do not exist in Bby matching on both ColA and ColBso the output should bedickens 3rushdie 4So if i write a query like this , I dont get the right result setSELECT A.ColA, A.ColBFROMRS_A AINNERJOIN RS_B BONA.ColA <B.ColAORB.ColB <B.ColBBut if i do the following, i do get the right result, but followingseems convoluted.SELECT A.ColA, A.ColBFROMRS_A AWHERE ColA + CAST(ColB AS VARCHAR)NOT IN (SELECT ColA+CAST(ColB AS VARCHAR) FROMRS_B B)
I am trying to display hirearchical data using data region. For eg. the first level will be a list of customer names. The second level will be a list of Invoices under each customer. The third level will be a list of product names that were sold under each invoice.
I used a list for the data region and in each hireachy, there is a textbox in each list to display the data. I am trying to associate each data region with a datatable (I will provide the logic to populate the datatable with appropiate data). I do not want the ReportViewer to interact directly with a database because this is a 3 tier design and I am using the ReportViewer in local mode. I couldn't find any example of these. Can anybody help? Also I would like to see an example of the .rdlc file in these situation. Thanks very much.
I've always bound data to a dataset...how do I display data without a dataSet? This is how i usually display data... SqlConnection myConnection = new SqlConnection(conn); string sqlQuery = "SELECT * FROM questions"; SqlDataAdapter myCommand = new SqlDataAdapter(sqlQuery, myConnection); DataSet ds = new DataSet(); myCommand.Fill(ds, "questions"); MyDataGrid.DataSource = ds.Tables["questions"].DefaultView; MyDataGrid.DataBind(); <%# DataBinder.Eval(Container.DataItem, "answer3")%>
Hi All I am new to VS 2005 and ASP.NET. I used to use Dreamweaver to design but now I am trying VS. What I want to do is to display data retrieved with a SqlDataSource in a web page. I know how to do it by binding it to the various controls (Grid, DataList, DetailsView, FormView, Repeater.) available but how can I display it without using any of the mentioned (Grid, DataList, DetailsView, FormView, Repeater)? Any help apprecited.
Hi, I have stored procedure with cursor I have to use following step 1 fetch RateValidDates into @Id_RateCode, @TheValidDate .... get data
step 2 fetch prior from RateValidDates ... condition
step 3 fetch NEXT FROM RateValidDates into @Id_RateCode, @TheValidDate ... go to next record
Sql query analyzer output result of fetch NEXT FROM on the screen What seeting should i use to avoid output on screen (The reason My cursor takes about 8000 - 10000 rows when it's open)
When I select a table and try to view the data I take the return all rows or return top option. However nothing is displayed. These options worked before and I don't understand why it's not working now. Can anyone help?
I am using a filter in a matrix control. I would like to display a "No data" type message if no data is present. The problem I'm running into is the base query is returning data, but the optional filter is removing all rows from display.
So using CountRows in the base dataset doesn't quite cut it. Is there an alternative?
I have a fairly complicated report consisting of numerous datasets and numerous tables.
In one of my tables I want to display the message "No data to display" if nothing comes back from the query. Currrently the table just disappears if there is no data. Is there a way to display the table if there is nothing in the query?
Hi all. i have the following function below,which use to retrieve the order detail from 2 table which are order detail and product. i have many duplicated order id in order detail, and each order id has a unique product id which link to product to display the product information. however when i run the following function below . its duplicated each product info and dsplay in the combo box. May i know whats wrong with my code?
Public Sub ProductShow()
Dim myReader As SqlCeDataReader Dim mySqlCommand As SqlCeCommand Dim myCommandBehavior As New CommandBehavior Try connLocal.Open() mySqlCommand = New SqlCeCommand mySqlCommand = connLocal.CreateCommand mySqlCommand.CommandText = "SELECT * FROM Product P,orders O,orderdetail OD WHERE OD.O_Id='" & [Global].O_Id & "' AND P.P_Id=OD.P_Id " myCommandBehavior = CommandBehavior.CloseConnection myReader = mySqlCommand.ExecuteReader(myCommandBehavior) While (myReader.Read()) cboProductPurchased.Items.Add(myReader("P_Name").ToString()) End While myReader.Close() Catch ex As Exception MsgBox(ex.ToString) Finally connLocal.Close() End Try
I have the following sqlDataSource. I wan't to display one piece of data, not a whole row, from it. I can find lots of information on putting it into a datagrid, but nothing on puttin one piece in a textbox. I cannot use a formview as we are embedding html in response.write and it breaks in a formview. Thanks.
<asp:SqlDataSource runat="server" ID="myEmpInfo" SelectCommand="Select di.EmpInfo,di.eth,gc.t_level From tblEmp di ,tblMisc gc Where di.empnum = @empnumand di.empnum = gc.empnum" DataSourceMode="DataReader" ConnectionString="<%$ ConnectionStrings : myConnectionString %>">
Hi, I have a requirement where I need to display the items category wise I have 3 tables, one stores category_id, parent_id and category_name second table stored item_id,item_name and proce 3rd table stores category_id and item_id I need to display the values like this Category name, Item name with first parent category ans ites items should be displayed and next sub category and its item By category table with contain 2 levels of sub category i.e Category1 Category11 Category111 any help with the query would be much appreciated, I wrote the query something like this.... select c.category_name,parent_id,item_name from category c,items i,Category_item ci where ci.item_id=i.item_id and c.category_id=ci.category_id order by parent_id, category_nameBut it will display all parent category items then the sub category items I want to display like thiscategory1 items1category11 item11category1 item12category11 item111category11 item112 category2 item2 Thanks
I have a webform that I am wanting to display data from a database. Right now I am using the gridview but for future purposes when it comes to maintenance what would be the easiest way to do updates? For example, if I add a new record into the database I would like the webform to automatically update itself to show all the records including the new record I added. Do I need to use a "table" and somehow connect it to a database? Do any stored procedures need to be created? Suggestions/ideas/codes help help help would be verrrry much appreciated!!! Also I am using MS Server 2003 and C# as the programming language. Thank you!!!!
I have a tabe in my sql server 2005 database which contains a long description and I want to display the first 100 charactors on my web page but not sure how to do this I can only display the whole description. I'm not sure if I need to write the query to the database so it only brings the first 100 charactors back or query the whole description and then take the first 100 charactors in asp.net and display that can any one help
Good Day, Please help me, I have a database that looks like this, Building No. Floor No. Room No. Customer Name Appliances Appliances Codea 1 01 John TV 12a 1 02 //up tob 20 10 james Ref. 22b 20 10 joe Microwave 15 //and soon so if you would notice some rooms are vacant, as it usually happens, the buildings, floors and rooms are fixed except for the customers and the appliances. so at first i made this gridview and display this data in this manner:Customer Location (Building + floor) total rooms Used Rooms Available rooms A1 2 1 1 B2010 2 2 0 so if you would look at the table above, it just SUM up all tenants in a specific Location then Group it by Customer location,but i need to add the appliances in a different format like this: Customer Location (Building + floor) total rooms Used Rooms Available rooms TV Ref Microwave A1 2 1 1 tick B2010 2 2 0 tick tick so this is what i need to show, i already have done the first table (w'o appliances) but how can i make this second table?? please help me, SALAMAT PO.,Thanks
period course1 course2 4 NULL Eng 4 NULL Math 4 Phys NULL 4 Chem NULL
Is there any way I can show this data this way (the order is irrelevant - row1 can be joined with row3 or row4)? period course1 course2 4 Phys Eng 4 Chem Math 4 Phys Eng 4 Chem Math
Basically, I want to be able to remove nulls.
Please let me know if any of you have come across such an issue.
I have a table. I have some sensitive data that I don't want to display that sensitive data. The columns I want to abstract are
Firstname varchar(50) not null Latname varchar(50) not null dob datetime not null addressline1 varchar(50) null adressline2 varchar(50) null city varchar(50) null postalcode varchar(20) null
I want to display null values as nulls empty as empty not null as numbers.
