Hi, Im trying to pull data from 2 fields in the same table into a SqlDataSource that feeds into a GridView, and display them as 1 field in GridView? I have a database table that has entries of users and their friends. so this tblFriendUser has a column called UserName and another column called FriendUserName. I am trying to get a list of friends for that particular user. Note that if User1 initiated the friend request, he will be listed as UserName and his friend as FriendUserName, but if his friend initiated the friend request, it will be vice versa: him being the FriendUserName and his friend the UserName. So I want the following 2 queries run and merged into one query in order to return 2 columns only: UserFriendID & UserName, is that possible? Is my design bad? Any suggestions/advice would help! Thanks a lot!
SELECT UserFriendID, UserName FROM tblUserFriends WHERE (UserName = @UserName);
SELECT UserFriendID, FriendUserName AS UserName FROM tblUserFriends WHERE (FriendUserName= @UserName);
I have a report that is built using the report builder and the report model that was created. With the fields that are displayed in the report, it could be possible for the database to have multiple rows with the same values for all the fields (that are displayed in the report). The PK will be different, but this is not displayed in the report as the PK won't make sense in the report. So what happens is that the report displays just 1 record even though the database has multiple records because all the fields (that are displayed in the report) are identical. Is there a way to make the report display all the rows irrespective of duplicates?
When I include a field from my SQL Server database, which has it's Allow Nulls value checked, in the data source of any type of control with it's Enable Editing property check, I then can not edit the record! If I remove the Allow Nulls field I can then edit it! What am I missing here?
I am transfering data from a DB2 table to a SQL 2005 table using the OLE DB Source, Data Converstion then the OLE DB Destionation.
So, I have a numeric (Precision 3, Scale 2) field with NULL value in the DB2 table.
I'm trying to transfer these data to a SQL2005 table and I am receiving this error message below:
"[Destination Table TFACIL [18]] Error: There was an error with input column "COMB_OPPT_PRCT" (2865) on input "OLE DB Destination Input" (31). The column status returned was: "The value violated the integrity constraints for the column.". "
The field must accept null because of the APPLICATION ( i can't change it, im not the owner ).
I am not sure If I can do this with a lookup, but what I would like todo is perhaps use lookup to retrieve a control date from anunassociated table to control what date is entered in another table.For example :the main table , table 1 has many entries with a field called date_enter which is the date the record was entered.table 2 has a control_dateIf the date entered in table 1 is less than or = to the control date wewant to give the user a error message.I am thinking of using display only field and lookup to set itWould need to have the date value from the control table available tothe active table of table 1 when entering the the date_enter.However as there is no join field between the two tables am not surehow to do it. Was thinking might have to add a key field that wasallways null and in the BEFORE EDITADD EDITUPDATE section set it sothat the key would be nullAm using Informix 5 , Any help would be apprecia
I know there has to be a way to do this, but I've gone brain dead. Thescenario..a varchar field in a table contains a date range (i.e. June 1,2004 - June 15, 2004 or September 1, 2004 - September 30, 2004 or...). Theusers have decided thats a bad way to do this (!) so they want to split thatfield into two new fields. Everything before the space/dash ( -) goes intoa 'FromDate' field, everything after the dash/space goes into the 'ToDate'field. I've played around with STRING commands, but haven't stumbled on ityet. Any help at all would be appreciated! DTS?
I'm trying to Display 2 fields using the SalesOrderDetail table.
CarrierTrackingNumber
Count the number of CarrierTrackingNumber and give alias name of “Count CarrierTrackingNumber.”
I only want to return records where the CarrierTrackingNumber has count = or greater than 2.
Below is the SQL I developed, but I'm getting this error when I try to execute: Msg 245, Level 16, State 1, Line 1
Conversion failed when converting the nvarchar value '4911-403C-98' to data type int.
SELECT CarrierTrackingNumber, ( SELECT COUNT(CarrierTrackingNumber) FROM SalesOrderDetail WHERE CarrierTrackingNumber >= 2 ) AS CountCarrierTrackingNumber FROM SalesOrderDetail
I want to select all the fields from just one table This is what i have and i am having trouble selecting all the fields select * from ace_users where chdata EXISTS (select chdata, count(chserialnum) from ace_users group by chdata having count(chserialnum)> 1)
Dear All I am trying to populate an OledbDatareader for binding to a ASP datagrid.
For this I use select statement to display combined fields in a datagrid cell. Eg. Select (Field1+ '<br/>' + Field2 + '<br/>' + Field 3) As Address .. and so on. But the problem is if any of the three field is null the combined field 'Address' returns as Null. Please help me to overcome this problem.
Now I need to display the second field which is a #-separated field as individual fields alongwith tghe other fields that are shown on execution of the query. Can this be done? Please guide me on this...
I have a requirement to display the elapsed time between two datetime fields. What i have been able to do is datediff the dates and get the elapsed time in minutes and then i am trying to format it as HH:MM.
For example, an activity started on Nov 1 2007 08:00 and finished Nov 1 23:59, the elapsed time should be displayed as 15:59.
The other example is if the activity spans over a couple of days, it should be say 49:03.
I put the following code in the format of the textbox, but it only seems to work when the length of the minutes is greater than 1.
I am trying to figure out a way to toggle the visibility of attribute data based on a parameter. Specifically, I have a report that has many columns that an end-user may not want to see, depending on what they are using the report for. I know you can toggle visibilities on individual columns easily enough, however I want the user to be able to select which fields (at the attribute level) they want visible on the report up in the parameters, via a multi-value prompt.
I have a report parameter named "Schools" which display a list of schools. For example, Alo elementary school, Balo middle school and Calo high school.
When "Alo elementary" is selected the report only display students from that school along with other assessments data fields. same goes for other schools too. But I want to display different data fields for "Calo high school" when it is selected. It is not currently possilbe becasue I am using the same template for all types of schools. There some fields only should be displayed for "Calo high school" but not for any other type of schools.
I can accomplish this by creating two separate report, one for "Calo high school" and the other for other schools. But I want to accomplish this just by creating one report. So when "Alo elementary school" is selected it displays report with certain fields and when "Calo high school" is selected then it displays same fields as "Alo elementary school" but as well as some other fields too in the report. Is this possible? Need help.
I have developed a report that pulls its data from an SSAS cube. The report is grouped on Fields!FacilityName. On each "page" of the report, I have information for the displayed facility.
At the top of each page in my report I have a textbox whose value is =Fields!FacilityName. Further down on the report I have another text box whose value is set exactly the same. When I preview the report, I always have a value in the upper box, but only sometimes have a value in the lower box. If I change the value in the lower box to just a text string, it will always display, but when I put in the actual field reference it does not. It always doesn't display for the same facility names. Remember, the upper textbox on the form always displays 100% of the time.
I have a Dundas chart in the middle of the page on the report between these textboxes, but another field that pulls parameters and even a matrix all render correctly below that chart.
They both have the same parent according to the properties. I have even copied and pasted the working textbox further down the screen, with no improvement. When I changed the value of the textbox to "=cstr(len(Fields!FacilityName))", on the pages when it wants to be blank, it reads 0, and on other pages it shows a larger number. But the other textbox on the screen will always properly show the FacilityName.
I have also tried changing the name of the textbox, settings output to YES instead of Auto. If I slide the non-working textbox up to the top of the page and the working textbox down to the bottom area of the page, the bevavior switches.
Does anybody know of rendering issues with textboxes showing the same infomation?
I have a SQL 2000 table in which pictures are stored as an Image column. I want to display then onto a c# aspx webpage without storing them to disk. What is the best way to read and display the pictures? In classic ASP I used to do this: Response.ContentType = "image/jpeg" Response.BinaryWrite rs.fields("ThisImage") but I can't get this to work in c#.
USE MLS select sc.name,f.field#,fdesc,flong from sysobjects so join syscolumns sc on so.id = sc.id join fld f on f.field# = replace(sc.name,'_','') where so.name = 'dbo.tbl_MLS_Leads_Trans'
I am trying to get the description which is flong and I get the following error message:
Msg 208, Level 16, State 1, Line 2 Invalid object name 'fld'.
I have a numeric data field called Price and this has a value of 0.000 in the db. when i create a package to extract this data to a flat file, the value is displayed as .000 what should i do to make it appear as 0.000 in the flat file.
I tried using a derived column expression where i check if the db value is 0.000 and display it as a string "0.000". this works fine if the OLEDB source is a sql command but fails if the OLEDB source is a sql command from variable.
Hopefully, someone can help me. I am working with a database that contains multiple fields within the tables that are being used for Clinical notes. The fields are defined as VARCHAR(3500). But when I try to extract data (either through Query Analyzer or Crystal Reports), only the first 256 characters are displayed. I ran a query to give me the length of the maximum entry size which returned 2722 characters, yet only 256 are displayed.
How do I go about extracting ALL of the data from this field? Any help is much appreciated.
In SQL SErver 2008, I have a text column. I need to display either 2nd word in the text column or 1st word in the text column based on certain conditions.
How shall i display either 2nd word or 1st word from a text field.
The formula for the above calculated fields are as below:
Opening Balance = carried forward balance from Year 2005 Debit = All positive amount Credit = All negative amount Net Change = Total Credit - Total Debit in Period 01 Balance = Total of Net Change + Opening Bal
Guys, hope someone out there can help me with the sql command for the above report?
SELECT DENSE_RANK() OVER (ORDER BY clroot.Ctgry1.Descr ASC) AS Row1, Row_Number() OVER (partition BY clroot.Ctgry1.Descr ORDER BY clroot.Ctgry1.Descr, T1.Descr ASC) AS Row2, left(t1.ID,4)+right(t1.levelid,4) AS ERPID,T1.ID AS Ctgry1ID, clroot.Ctgry1.ID AS ParentID, T1.LevelID, clroot.Ctgry1.Descr AS Category, T1.Descr AS SubCategory,
The formula for the above calculated fields are as below:
Opening Balance = carried forward balance from Year 2005 Debit = All positive amount Credit = All negative amount Net Change = Total Credit - Total Debit in Period 01 Balance = Total of Net Change + Opening Bal
Guys, hope someone out there can help me with the sql command for the above report?
I am setting up a database that will receive a lot of data from twoseparate telephone centers, the log table will in a short time haveover 1 million lines, and I was wondering if I should use 1 identifyfield or two:case 1:[Id] [int] IDENTITY (1, 1) NOT NULL[ServerId] [int] NOT NULLcase 2:[Id] [varchar(20)] IDENTITY NOT NULLWhere in case 1 I would just use a combination of Id and ServerId toidentify the line, where in case 2 I would have the Id field a varcharthat would look something like A-000001, A-000002 for server 1 andB-000001, B-000002 for server 2Which solution will be faster when searching for a record when thewill have over 1 million lines?
I am creating an app that allows the user to change the order of the list by changing a value in a displayOrder field. I'd love a button for move up /move down move bottom/move top and then pass that parameter to a stored procedure and it would renumber all the items in the list. Example ItemID description DisplayOrder Action0 item 1 0 Moveup/move down1 item 2 1 Moveup/move down2 item 3 2 Moveup/move down So clicking on move up on item 2 would pass and itemID, Action and perhaps a list id to a stored proc and it would renumber the list. I'm assuming it would be done with a loop but I've never tried that.. suggestions? Thanks - Mark
