Display Command Line Messages
Oct 30, 2007Hi,
I am executing a package using command line. I want to display messages on the console while the package execute. Which component will I use?
thanks.
Hi,
I am executing a package using command line. I want to display messages on the console while the package execute. Which component will I use?
thanks.
Hi can not execute a package!
If I run the package from Visual Studio, it works;
If I deploy it and execute it, it works;
If I log in the server an execute it, it works;
If I execute it from a Task using the SQL Server Agent it works fine until I have a DataReader Source in the Package!
Is there a way to display messages? To see more details why it is not running?
Thanks!
I have a process that is running on the os. This process is picking up FTP files every 5 min, it renames them so not to confuse them with the new files, copies all renamed files into one file to be used by bulk insert, runs the bulk insert to populate a table, and then runs the stored procedure that scrubbing the data and insert it into another table. For every transaction that I do in my stored procedure, I do the error checking as follows:
IF @@error <> 0
BEGIN
ROLLBACK TRANSACTION
RETURN
If my stored procedure encounters an error, return statement will stop it from running. If this happens, I need to stop the process that is running on the os as well.
Questions:
How can that be accomplished?
How to restart the stored procedure ones the error has been corrected?
Thank you for your help.
Some T-SQL commands can fail with multiple errors. For example, if you try to disable a primary key constraint using ALTER TABLE t1 NOCHECK CONSTRAINT PK, you will get messages like:
Msg 11415, Level 16, State 1, Line 341
Object 'PK' cannot be disabled or enabled. This action applies only to foreign key and check constraints.
Msg 4916, Level 16, State 0, Line 341
Could not enable or disable the constraint. See previous errors.
However, in the code below, only the last message is printed. How can I print all the error messages?
USE tempdb;
CREATE TABLE #t1(c1 INT CONSTRAINT PK PRIMARY KEY);
BEGIN TRY
ALTER TABLE #t1 NOCHECK CONSTRAINT PK;
PRINT 'Primary key disabled'
END TRY
BEGIN CATCH
PRINT ERROR_MESSAGE();
END CATCH
Using Query Analyzer, I can right click on an object and select "scriptobject to new window as create" and I get the text of the object'sdefinition (schema). Can I get same result from command line, i.e., fromosql, I can get text output for the definition of the object (something likedefncopy under Sybase)? If so, what is the command or store procedure name?Thanks in advance.
View 2 Replies View RelatedIs there any command line that I can use to do select from databases (SQL 2005)
View 4 Replies View RelatedI have a report I'm writing and have got a problem that has stumped me.
The data the report is based in is in this format:
Date Type
1/1/08 A
1/3/08 B
3/1/08 C
3/5/08 B
3/10/08 A
3/12/08 C
3/20/08 A
Management wants a report showing a line chart that summarizes the data by Month and by Type. So, there are 2 series depending on the Type and data values are based on the count of each Type. So, in the example above the x-axis group would be month, the values would be count(Type) and there would be 2 series €“ Series 1. A, B and Series 2. C
I€™ve defined the x-axis to be Month(Fields!DateOccured.Value). However, they want the x-axis to show every month for the entire year not just what is in the database. So, I defined the x-axis to have a scale of 1 to 12 and the major interval is set to 1. This displays 1 through 12 on the x-axis.
The problem is when there is no data (null) for a particular month. Instead of showing 0, the line chart does not plot anything and the line is drawn to the next displayed point. So, for example on the data above the line chart would plot:
January
Series 1 €“ Qty. 2 Series 2 €“ Qty. 0
February
Null
March
Series 1 €“ Qty. 3 Series 2 €“ Qty. 2
The line chart would draw a line from January to March skipping February. I need to display the null values as 0 and not null indicating no occurrences for the month rather than no data present.
Thanks!
hi I would appreciate if someone demonstrate how to automate ftp in a command line from within a batch file. I do want to move certain files from one server to another via ftp command line in an automatic fashion via running the batch periodically.
thanks
Ali
hi: I can't seem to run BCP thru the command line.
bcp pubs..authors out c:authors.txt -c -Usa -P
error:
Msg 170, Level 15, State 1, Server Y47SA, Procedure , Line 1
[Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near'.'.
I've been trying to run BCP thru command line all day. I tried OSQL, ISQL. I find this utility very
frustrating. btw - I have installed SP2.
any thoughts would be much appreciated.
TIA
deanna
Anyone know where I can find some command line tools such as RCMD etc.. Thank you.;)
View 1 Replies View RelatedI'm trying to insert into a table 2 values one of which is an
exec master..xp_cmdshell @command where I have assigned @command with a value
this statement gives me the result into a 1 col. table fine:
insert into mytable99(col1) exec master..xp_cmdshell @command
now what I want to do is put col2 in there as well!!
ie. insert into mytable99(col1,col2) values (exec master..xp_cmdshell @command, '123')
I get a sytax error ... on the exec ??
Could anyone help re the proper way of doing this ... thanks in advance
I use a similar command below to insert into a temp table the result of a large command line call to an exectable with many parameters passed in the command of which the result passed back contains many items. I then parse the response string to get my results...
set @command = 'dir'
insert into tsverisign(response) exec master..xp_cmdshell @command
My question is our can I insert two values at the same time to this same table one of which is my "exec master..xp_cmdshell @command"
similar to insert into tables (field_a, feild_b) values ('1','2')
Something like (and I know this does not work):
insert into tsverisign(response,trans_id)
values (exec master..xp_cmdshell @command, '123')
Any help would be greatly appreciated .... PS I'm new to MS SQL 2000 and proper syntax etc. etc. so I need full example so I can try. :rolleyes:
Hi All,
I was given a task of coming up with the script to recreate an existing database using a command line. I would use this script in case when the server is down and I can't get to Query Analyzer or EM to recreate it. I am not sure where to start. Any ideas are greatly appreciated.
Thanks.
What ius the synthax to backup an SQLServer DB from the command line ?
Thanks
Can someone give me the command to restart SQL?
Thanks
I want to restore a backup copy of a database from the command line. Canthis be done?Thanks, Tom.
View 2 Replies View RelatedHi Sir:Is any possible to run DTS package from Command Line ?Lucas
View 1 Replies View RelatedI am trying to create an quiet install for SQL Server Express. The install is being run under a local administrators account. However, when a user, who is only in the local users group, accesses the application using ClickOnce deplolyment, it says SQL Server Express Edition is not installed.
-Dan
Hello,
How can I set SQL Profiler to capture the logs via command line?
This is what I have:
I already have a SQL Profiler Template (fooTemplate.tdf) which tells what I need SQL to capture.
C:>"C:Program FilesMicrosoft SQL Server90ToolsBinnPROFILER90.EXE" /Sfoo /Dfoo /E /T"c:fooTemplate.tdf" /Oc:mysql.out
What other parameters am I missing?
Thanks!
J
Hi all,
A quick newbie question...
I am trying to install SQL Server 2005 Standard and upgrade from Express edition. The Edition Change check tells me I must run the setup from the command prompt "and include the SKUUPGRADE=1 parameter", but I don't know how to enter this from the command line.
I've tried "D:setup SKUUPGRADE=1" and "D:setup -SKUUPGRADE=1", as well as "D:setup.exe /SKUUPGRADE=1" without success.
Can anyone give me a clue as to where I'm going wrong?
Thanks in advance.
Slammin!
Hello everyone!
Bit of a problem executing a DTS command from a command line.
I have the following variables defined in my package:
UserVarchar1
UserVarchar2
UserVarchar3
All have a scope of Package, all of the mstrings
The command I'm attempting to run in 1 line is:
DTEXEC /FILE "C:SSIS PackagesED-CustomersPackage.dtsx"
/SET Package.Variables[User::UserVarchar1].value;"10"
/SET Package.Variables[User::UserVarchar2].value;"30719"
/SET Package.Variables[User::UserVarchar3].value;"BILLTO"
Description: The package path referenced an object that cannot be found: "Package.Variables[User::UserVarchar1].value". This occurs when an attempt is made to resolve a package path to an object that cannot be found.
DTExec: Could not set Package.Variables[User::UserVarchar1].value value to 10.
Any idea why?
Thanks for the help!
I have table1 with orderID and demographic info.
Table2 with orderID and items.
I would like to have a results display like this:
OrderIDDemographicInfo Item1Item2Item3....ect
One line per order. When I do a join I displaying all items in different rows.
Hey Folks,
I have inherited a project from a co-worker who has had a family tradegy, and I am trying to get up to speed with her project.
We have an SQL server 7 database which is getting backed up every night (by SQL itself) into a .BAK file. I need to know if it is possible to restore this file from the command line (a DOS prompt.) I know (or think I know) how to do it from within SQL Enterprise Manager, however the specific needs of this project require it be done from a command line on the machine.
I really am not an SQL guru...I don't even think I qualify as "knowing what I am doing" at all, so any advice you can offer will be greatly appreciated. This is kind og urgent, so your thoughts are welcome!
Thanks!
Mike
Does any know of a technique to filter out headers dashes and row count in an output file of an isql result? These switches seem to be available when running as isql/w, but not the command line. The -h-1 argument for no headers had no effect. Thanks in advance. Ron Hurley
View 1 Replies View RelatedDoes anyone know how to start sqlserver 7.0 from command line for windows 98?
Thanks
I'm trying to use the rcmd utility and when i try to connect to a server with it i get this error...
system not found or service not active? How do you activate the rcmd service? thanks for your help.
hello to all, and I hope you can help.
this is the code from BOL
dtsrun /Sserver_name /Uuser_nrame /Ppassword /Npackage_name /Mpackage_password /Rrepository_name
I have followed it and come up with ...
dtsrun /SPC-409 /Usa /Pmypassword /Nemployee_export /M? /R?
where can I know the repository_name, is it one of the following:
DTS package
Meta data service package
Meta data
all under Data Transformation Service folder in SQL Server
Thanks
Al
Hi all,
Are there any parameters for the SQLMANGR program???
I need to start it from the install script, and
have it autostart....
I found a single parameter /n that starts
the program without any display -
But I need it to autostart the server service itself,
so i can do some osql stuff after the installtion is completed.
thanks
tony
i have to print Go statement in new line through isql command
my isql command is
isql /Q -SServername -dDatabasename -Usa -PPassword -h-1 -n -q "set nocount on Select ' grant execute on ' + name + ' to user go ' from sysobjects where type = 'U' and name not like 'dt%'" -o SFGRants.sql >> Deploy.log
and out is like
select grant execute tablename to user go
but i want in different format like
select grant execute tablename to user
go
like that
thanking in anticipation
Hi all
I currently have a problem where I need to create a backup from MSSQL, via a command line, ideally from a batch script. This is on a PC. Each machine has SQL Server 2000 on.
I just need to know the code that dos will tell it to run the sql statement. Ideally the command will also give the directory to place the backup.
Regards MiloJ
I want to import a huge .csv file in my sql server database.
There are about 10000 rows and 30 columns
My file looks like this:
Attributname1; Attributname2; Attributname3; ...
data; data; data;...
data; data; data;...
data; data; data;...
Now my idea is to do this on the command line/batch script. I have found different ways to do this job but the problem is i have to create a table in the database first. The entries in the first line of the csv file are the attribute names.
After creating the table with attributes i must write the data in the database.
Hello,I would like to know whether it is possible to execute DTS(Data Transformation Services) packages created from withinthe EM (Enterprise Manager) user interface, from the commandline. That is, is it possible to execute a command at the DOSprompt which will execute, and optionally also reconfigure,the DTS package? This would allow invoking DTS packagesfrom within scripts.Thank you for your replies,Neil
View 2 Replies View RelatedI want to run and 'Alter Database' statement from within a batch file.The batch file is to be run from an external automation program,(don't ask why)..I know the syntax for the alter db statement but not sure how to do itin a batch file and also If I have 2 instances how do I run it againsteach instance.All being done on Windows 2000 with Sql 2000.Any ideas will be a help.
View 1 Replies View Related