Display (field) But Only Count Managers
May 8, 2007I need to figure out the number of managers without listing them. Label the column Number of Managers.
any help is appricated.
Number of Managers
-------------------------
6
ADVERTISEMENT
How To Display The Managers And The Employees Working Under That Manager
Sep 8, 2006Hello,I'm facing with a problem though it may look very simple for many ofu it is a bit complicated for me So kindly please help me outi have a table emp with employee id,name and mgridI need to display the managers and the employee working under thatmanager . How should this be done.Thanking uBroken Arrow
View 6 Replies View RelatedCount For Varchar Field - How To Get Distinct Count
Jul 3, 2013I am trying to get count on a varchar field, but it is not giving me distinct count. How can I do that? This is what I have....
Select Distinct
sum(isnull(cast([Total Count] as float),0))
from T_Status_Report
where Type = 'LastMonth' and OrderVal = '1'
Using Lookup And Display Only Field As Control Field
May 25, 2006I am not sure If I can do this with a lookup, but what I would like todo is perhaps use lookup to retrieve a control date from anunassociated table to control what date is entered in another table.For example :the main table , table 1 has many entries with a field called date_enter which is the date the record was entered.table 2 has a control_dateIf the date entered in table 1 is less than or = to the control date wewant to give the user a error message.I am thinking of using display only field and lookup to set itWould need to have the date value from the control table available tothe active table of table 1 when entering the the date_enter.However as there is no join field between the two tables am not surehow to do it. Was thinking might have to add a key field that wasallways null and in the BEFORE EDITADD EDITUPDATE section set it sothat the key would be nullAm using Informix 5 , Any help would be apprecia
View 3 Replies View RelatedHow Do I Display A Count?
Mar 15, 2007I want to display the number of records for each state in a database. I'm using a strongly types dataset. In my method, I have the followingSELECT COUNT(ID) AS iTotal, STATEFROM membersWHERE (Suspend = 0)GROUP BY STATEORDER BY STATEIn the code behind of my page I have Dim mateAdapter As New WAPTableAdapters.membersTableAdapter Dim mates As WAP.membersDataTable Dim mate As WAP.membersRow mates = mateAdapter.GetDataState For Each mate In mates Select Case mate.STATE Case "AK" LabelAK.Text = mate.ID. End Select Next What should LabelAK.Text = mate.ID. be for me to be able to display the number of records that have 'AK' in the state field?Diane
View 7 Replies View RelatedCOUNT Many But Display Just Once?
Apr 23, 2007Hi, I have a table that I insert a member's country into every timesomeone signs up. What I'd like to do is pull information from the DBsuch that I can see each country and the number of users from each.For example:Argentina 10Brazil 5Canada 3I'm having trouble writing the SQL for this...any suggestions?Thanks,Erik
View 2 Replies View RelatedNot Display The Letter Unless Count &>= 3
Jun 3, 2008SELECT name = SUBSTRING(name, 1, 1),
total = COUNT(SUBSTRING(name, 1, 1))
FROM products
GROUP BY SUBSTRING(name, 1, 1)
the assignment said that,
quote:"Do not display the letter and count unless at least three product names begin with the letter."
but i got the errors when I try following.
WHERE total >= 3
quote:Msg 207, Level 16, State 1, Line 4
Invalid column name 'total'.
WHERE COUNT(SUBSTRING(name, 1, 1)) >= 3
quote:Msg 147, Level 15, State 1, Line 1
An aggregate may not appear in the WHERE clause unless it is in a subquery contained in a HAVING clause or a select list, and the column being aggregated is an outer reference.
so what should I do?
Display Count Of Records From The Same Table &> 1
Dec 27, 2007How would I list the users in the users table that have duplicate IDs or count of IDs > 1?The UserName field is unique.
State UserName First Last ID City CountTX Kkeaton Kathryn Keaton 1001 Dallas 2TX KakiKeaton Kathryn Keaton 1001 Dallas 2I think I have to use a subselect? If I use group by then it won't show both records. It shows only one of them.Thanks
Craig
Transact SQL :: Display 0 With COUNT And GROUP BY
Aug 25, 2015How can I display 0 when using COUNT and GROUP BY?I'm using SELECT CASE in my query. I was trying to use COALESCE but no result, COUNT result = 1. (there should be 0).
COALESCE((COUNT(DISTINCT (CAST((CASE
WHEN CurrStat = @Stat AND LogDate = @LogDate THEN Enumber ELSE 0 END) AS int)))), 0) AS InTrack,
Retrieve Count From Stored Procedure And Display In Datagrid.
Feb 9, 2006Hi Guys,
I have a sql procedure that returns the following result when I execute it in query builder:
CountE ProjStatus
6 In Progress
3 Complete
4 On Hold
The stored procedure is as follow:
SELECT COUNT(*) AS countE, ProjStatusFROM PROJ_ProjectsGROUP BY ProjStatus
This is the result I want but when I try to output the result on my asp.net page I get the following error:
DataBinder.Eval: 'System.Data.DataRowView' does not contain a property with the name Count.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Web.HttpException: DataBinder.Eval: 'System.Data.DataRowView' does not contain a property with the name Count.Source Error:
Line 271: </asp:TemplateColumn>
Line 272: <asp:TemplateColumn>
Line 273: <itemtemplate> <%# DataBinder.Eval(Container.DataItem, "Count" )%> </itemtemplate>
Line 274: </asp:TemplateColumn>
Line 275: </columns>
My asp.net page is as follows:
<script runat="server">
Dim myCommandPS As New SqlCommand("PROJ_GetProjStatus")
' Mark the Command as a SPROC
myCommandPS.CommandType = CommandType.StoredProcedure
Dim num as integer
num = CInt(myCommand.ExecuteScalar)
'Set the datagrid's datasource to the DataSet and databind
Dim myAdapterPS As New SqlDataAdapter(myCommandPS)
Dim dsPS As New DataSet()
myAdapter.Fill(dsPS)
dgProjSumm.DataSource = dsPS
dgProjSumm.DataBind()
myConnection.Close()
</script>
<asp:datagrid id="dgProjSumm" runat="server"
BorderWidth="0"
Cellpadding="4"
Cellspacing="0"
Width="100%"
Font-Names="Verdana,Arial,Helvetica; font-size: xx-small"
Font-Size="xx-small"
AutoGenerateColumns="false">
<columns>
<asp:TemplateColumn HeaderText="Project Summary" HeaderStyle-Font-Bold="true" >
<itemtemplate> <%# BgColor(DataBinder.Eval(Container.DataItem, "ProjStatus" ))%> </itemtemplate>
</asp:TemplateColumn>
<asp:TemplateColumn>
<itemtemplate> <%# DataBinder.Eval(Container.DataItem, "Count" )%> </itemtemplate>
</asp:TemplateColumn>
</columns>
</asp:DataGrid>
Please help if you can Im havin real trouble here.
Cheers
Retrieve Columns And Display Count For Two Different Data Sources
Jan 19, 2012I am using Query Writer (should be SQL 2005) and have included the following code.
The end result: -should retrieve columns and display the count for two different data sources that were added by personnel in a specific department.
Problem: results are returned but not accurate. The code below works just fine and returns the results for all spot buy orders added by personnel in the sales department. However, I want to add a column in the same report that also counts blanket orders from the exact same table added by personnel in the sales department. The database uses views (v) in lieu of dbo.
Parameters:
@Add_Date_From SMALLDATETIME='',
@Add_Date_To SMALLDATETIME='',
@Last_name VARCHAR(50)='',
@First_Name VARCHAR(50)=''
Query:
SELECT
T1.Last_name,
T1.First_name,
T2.Position,
T3.Add_date,
COUNT(T4.PO_Type) AS 'Spot Buy Added'
[Code] ....
If I substitute COUNT(T4.PO_Type) AS 'Spot Buy Added' with COUNT(T4.PO_Type) AS 'Blanket Added' I also get accurate results for the blanket order. IE separately they work just fine. If I try to combine the two that is where the trouble begins.
What am I doing incorrectly when I try to add the criteria/code for the additional column to count the blanket orders?
Reporting Services :: How To Display Count Of Column Groups
Oct 14, 2015How to count the column group values and how to print the counts on every column for column group.
I used below expression to get the total column group count.
=CountDistinct(Fields!MMU.Value, "DataSet3")
Dynamic View - Add A Column To Display Running Count In Table
Jul 22, 2014I have a view created from only one table.
VW_Stats ( Tab_Name,Load_Status,User,....)
Tab_Name & Load_Status columns provides the information about Name of table and status of data getting loaded to this table.
To this I would like to add a column to display the running count in the table, I mean how many records so far loaded, as below the recordCount coming from the same table tbl_collection
Table_name Load_Status RecordCount User...
tbl_collection Running 1244 XYZ
Analysis :: Query To Display Count Of Products When Month Is Primary
Sep 18, 2015I am writing a query to display the count of products when a month is the primary month (Month where large sales happened)..Please consider the following query..
With Member ProductRank as
Rank([Date Due].[Calendar].currentmember,TopCount([Date Due].[Calendar].[Month],1,[Measures].[Sales Amount]))
Member PrimaryProd as
Count(Filter([Product].[Product].[Product],[Measures].ProductRank=1))
Select PrimaryProd on 0, Order([Date Due].[Calendar].[Month],PrimaryProd,bdesc) on 1 from [Sales]
Output:
It runs for 13 seconds on my laptop. I have modified the query to get the results fast like With
Set MySet as TopCount([Date Due].[Calendar].[Month],1,[Measures].[Sales Amount])
Member ProductRank as
Rank([Date Due].[Calendar].currentmember,MySet)
Member PrimaryProd as
Count(Filter([Product].[Product].[Product],[Measures].ProductRank=1))
Select PrimaryProd on 0, Order([Date Due].[Calendar].[Month],PrimaryProd,Bdesc) on 1 from [Sales]
Output:
This query runs instantly and result is not the same. Am I missing something here?
Want To Display Null In A Field
Sep 20, 2006ad1 ad2
-----------------------------
younge joe
null null
youn null
want a result like that. anyone can help me to do it?
ad1+ad2
-----------------------
younge joe
null
youn
Intermittent Field Display
Mar 7, 2007This is either a bug, or I am crazy.
I have developed a report that pulls its data from an SSAS cube. The report is grouped on Fields!FacilityName. On each "page" of the report, I have information for the displayed facility.
At the top of each page in my report I have a textbox whose value is =Fields!FacilityName. Further down on the report I have another text box whose value is set exactly the same. When I preview the report, I always have a value in the upper box, but only sometimes have a value in the lower box. If I change the value in the lower box to just a text string, it will always display, but when I put in the actual field reference it does not. It always doesn't display for the same facility names. Remember, the upper textbox on the form always displays 100% of the time.
I have a Dundas chart in the middle of the page on the report between these textboxes, but another field that pulls parameters and even a matrix all render correctly below that chart.
They both have the same parent according to the properties. I have even copied and pasted the working textbox further down the screen, with no improvement. When I changed the value of the textbox to "=cstr(len(Fields!FacilityName))", on the pages when it wants to be blank, it reads 0, and on other pages it shows a larger number. But the other textbox on the screen will always properly show the FacilityName.
I have also tried changing the name of the textbox, settings output to YES instead of Auto. If I slide the non-working textbox up to the top of the page and the working textbox down to the bottom area of the page, the bevavior switches.
Does anybody know of rendering issues with textboxes showing the same infomation?
Direct Display Of SQL Image Field
Aug 3, 2004Hi
I have a SQL 2000 table in which pictures are stored as an Image column. I want to display then onto a c# aspx webpage without storing them to disk.
What is the best way to read and display the pictures?
In classic ASP I used to do this:
Response.ContentType = "image/jpeg"
Response.BinaryWrite rs.fields("ThisImage")
but I can't get this to work in c#.
Trying To Display Alias Field Names
Nov 20, 2006Hello All,
I have the following code:
USE MLS
select sc.name,f.field#,fdesc,flong
from sysobjects so join syscolumns sc
on so.id = sc.id
join fld f
on f.field# = replace(sc.name,'_','')
where so.name = 'dbo.tbl_MLS_Leads_Trans'
I am trying to get the description which is flong and I get the following error message:
Msg 208, Level 16, State 1, Line 2
Invalid object name 'fld'.
What am I doing wrong?
TIA
Kurt
Display All Fields Including The Field Has Dup
Nov 14, 2007I have one table where i want to use aggregate function for duplicate rows and also be able to select all fields to display. How would i do that?
Here is my query:
select Z, count(*)as num from Table
group by Z
having count(Z) > 1 ----- this returns 213 rows
Select Z, A,B,C,D From Table
Group By Z, A,B,C,D
Having Count(Z)>1 ----This gives me nothing
Hope I am explaining this correctly as to what I want.
Thanks,
Saru Brochu
How To Display The Leading Zero In A Numeric Field
Feb 25, 2008I have a numeric data field called Price and this has a value of 0.000 in the db. when i create a package to extract this data to a flat file, the value is displayed as .000
what should i do to make it appear as 0.000 in the flat file.
I tried using a derived column expression where i check if the db value is 0.000 and display it as a string "0.000". this works fine if the OLEDB source is a sql command but fails if the OLEDB source is a sql command from variable.
any help would be appreciated.
Thanks.
Display Over 256 Characters For VARCHAR(3500) Field
Jan 12, 2006Hopefully, someone can help me.
I am working with a database that contains multiple fields within the tables that are being used for Clinical notes. The fields are defined as VARCHAR(3500). But when I try to extract data (either through Query Analyzer or Crystal Reports), only the first 256 characters are displayed. I ran a query to give me the length of the maximum entry size which returned 2722 characters, yet only 256 are displayed.
How do I go about extracting ALL of the data from this field? Any help is much appreciated.
Thanks in advance.
Split Text Field - Display 1st Or 2nd Word
Sep 24, 2012In SQL SErver 2008, I have a text column. I need to display either 2nd word in the text column or 1st word in the text column based on certain conditions.
How shall i display either 2nd word or 1st word from a text field.
Convert Datetime Field To Display Date
Aug 9, 2006I have a field that I would like to only display the date as mm/dd/yyyy. Current field shows mm/dd/yyyy hh:mm:ss AM.
View 10 Replies View RelatedStored Procedure To Update A Display Order Field.
Dec 20, 2006I am creating an app that allows the user to change the order of the list by changing a value in a displayOrder field. I'd love a button for move up /move down move bottom/move top and then pass that parameter to a stored procedure and it would renumber all the items in the list.
Example
ItemID description DisplayOrder Action0 item 1 0 Moveup/move down1 item 2 1 Moveup/move down2 item 3 2 Moveup/move down
So clicking on move up on item 2 would pass and itemID, Action and perhaps a list id to a stored proc and it would renumber the list. I'm assuming it would be done with a loop but I've never tried that.. suggestions?
Thanks - Mark
Text Field To Display Date Parameter Chosen
Mar 26, 2008Hi,
I'm attempting to use the following code to display either 'All' or the date value selected by the user from a Report parameter;
=iif(Parameters!FromCheckOutDateDate.Value.ToString = "[Check Out Date].[Date].[All]", "All", "From Date: " + Parameters!FromCheckOutDateDate.Value.ToString.Substring(26,10))
This is throwing an error ('#Error').
I can use the following code with no error, though its not as useful;
=iif(Parameters!FromCheckOutDateDate.Value.ToString = "[Check Out Date].[Date].[All]", "All", "Not all")
I can even use this to display the selected value (i.e. 2007-01-01);
Parameters!FromCheckOutDateDate.Value.ToString.Substring(26,10)
Why can't I use them both in my iif statement?
Can someone please help?
How To Count This Field
Mar 5, 2007I have a table like this. Each ConNo can have many boxes. The number of the box is an identfier, not a quantity.ie Box 3 = 1 box.A box may have a letter as a suffix or not.
I want to group by ConNo and total the boxes so I know how many Boxes are in each ConNo eg ConNo 200 5 boxes
TransId 1234
ConNo 200
BoxNo 1
BoxSuffix
TransId 1235
ConNo 200
BoxNo 1
BoxSuffix
TransId 1236
ConNo 200
BoxNo 2
BoxSuffix
TransId 1237
ConNo 200
BoxNo 2
BoxSuffix A
ConNo 200
BoxNo 1
TransId 1238
ConNo 201
BoxNo 1
TransId 1239
ConNo 201
BoxNo 1
TransId 1240
ConNo 201
BoxNo 3
TIA
Top N A Count Field?
Apr 10, 2008I've got a stored proc which returns a location and corrosponding defects for that location. My matrix has the locations as rows and a count of defects as the data.
so...
LOCATION COUNT
--------------- ----------
AREA1 10
AREA2 5
AREA3 3
AREA4 2
AREA5 1
How can I manipulate the matrix (or table?) so I'll only show the Top 3 highest counts? I've tried screwing around with the Top N Filter, but as soon as I do =COUNT(Field!Defect.Value) on it the report wont run anymore. If the data came over in the above format that would make my life so much easier...but my matrix is all about aggregate data
Also I cant modify the stored proc as that dataset is used on multiple areas in the report
Any help would be great
Thanks,
Steve
Can I Bind A Label Control To A SqlDataSource To Display One Field From A Table?
Feb 5, 2006Hi,What's the 'new' declarative way to fetch one field from a SQL table and display the result in a Label control?I have a users table with a fullname field. I want to query the table and retrieve the fullname where the usertable.username = Session("loggedinuser")I can make the SqlDataSource ok that has the correct Select query, but not sure how to bind the label to that.thanks,Bruce
View 4 Replies View RelatedUpdate A Field With Count (*)
Jan 3, 2005Hi,
I am trying to update a field in a temptable with the count of items in another table. To illustrate, CustomerID=23 and I want the number of occurences in the temp table. Here's the code which DOESN'T work:
INSERT INTO TempTable
(
CustomerID,
FirstName,
LastName,
DateAdded,
AlbumPicture,
LayoutCount
)
SELECT
Albums.CustomerID,
Customers.FirstName,
Customers.LastName,
DateAdded,
AlbumPicture,
COUNT(*) FROM Layouts WHERE Layout.customerID = Albums.CustomerID
FROM
Albums JOIN
Customers on (Albums.CustomerID=Customers.CustomerID)
Please take a look at the COUNT line. Here I want to count the occurences of a specific customerid in another table and put in into th LayoutCount field.
SQL server reports "Incorrect syntax near the keyword 'FROM'". Any ideas how to achieve this?
Many thanks!!
Eric
Returning A Count Of A Certain Field
Nov 18, 2014I want to get a count of how many PosAnswer are associated with the QuesToAsk 'List your top 5 favorite places'
This is the syntax I am using to achieve this, and it works, but wasn't sure if there was a better way (changing the data structure is unfortunately not an option in this situation). Here is my table structure
Code:
Create Table Test
(
QuesToAsk varchar(1000),
PosAnswer varchar(1000)
[Code] ....
And this is the syntax I use to get the count I am after
Code:
DECLARE @VariableName varchar(25)
DECLARE @FormattedVariableName varchar(25)
DECLARE @FieldCount int
SET @VariableName =
[Code] ....
Get A Count On A Field For A Specific Value
Sep 13, 2013I am attempting to combine to queries that I created and am not having success. I need to get a count on a field for a specific value and have to do this by gender and by an age range. So here is the query I came up with. I don't get any errors produced but I also don't get any results.
$query = "SELECT p1.sex, age_group, COUNT(CASE WHEN p4.q1 = 'Yes' THEN p4.q1 END) AS heart_attack FROM (select p1.sex,".
" CASE WHEN datediff(year, dateadd(day, -datepart(dayofyear, GetDate()), p1.birthday) , dateadd(day, -datepart(dayofyear, GetDate()), GetDate())) BETWEEN 11 AND 20 THEN '11-20'".
" WHEN datediff(year, dateadd(day, -datepart(dayofyear, GetDate()), p1.birthday) , dateadd(day, -datepart(dayofyear, GetDate()), GetDate()))
[code]....
Displaying A 0 Value When There Is No Count Field
Sep 17, 2007Hopefully this makes sense. I am new to SQL Reporting. My code is below. I am trying to get my query to display 0 when a category (prob_ctg.sym, does not have a Count value.
SELECT COUNT(*) AS Expr2, ISNULL(COUNT(*), '0') AS Total, CONVERT(varchar(20), Requestor.c_last_name) + ', ' + CONVERT(varchar(20),
Requestor.c_first_name, 112) AS Customer, Calls.ref_num, Calls.category, prob_ctg.sym, Calls.summary, DATEADD(s, Calls.open_date - 21600,
'1/1/70 12:00:00 am') AS OpenDT, DATEADD(s, Calls.close_date - 21600, '1/1/70 12:00:00 am') AS CloseDT, [Group].c_last_name AS GroupName
FROM ctct Requestor INNER JOIN
ctct [Group] INNER JOIN
call_req Calls ON [Group].id = Calls.group_id ON Requestor.id = Calls.customer INNER JOIN
int_org INNER JOIN
prob_ctg ON int_org.id = prob_ctg.organization ON Calls.category = prob_ctg.persid
WHERE (int_org.iorg_c_id LIKE '%400111%') AND (prob_ctg.del = 0) AND (DATEADD(s, Calls.open_date - 21600, CONVERT(DATETIME, '1970-01-01 00:00:00',
102)) BETWEEN @stdt AND @eddt)
GROUP BY Calls.category, prob_ctg.sym, Calls.summary, Calls.ref_num, Calls.open_date, Calls.close_date, [Group].c_last_name, int_org.iorg_name,
int_org.iorg_c_id, Requestor.c_last_name, Requestor.c_first_name
Transact SQL :: Way To Count Changes In Value Of A Field
Oct 13, 2015I want to avoid iterating through a table row by row and programmatically incrementing a counter,/I have define a view called Q2 with the following fields of interest:
Trial varchar(25)
BI int
Track int
CAT int
What I would like to do is partition by Trial, BI, and Track, and count the number of times CAT changes value. In Access, I would just iterate through a recordset inside a function, but I would like to see if there is a set based solution.Adding Sample Data and Output.
Trial BI Track CAT
A 5 3 1
B 5 3 2
[code]...