Display Null Values
Jul 17, 2007
Hello,
I'm facing a problem in my reporting.
I have a Customer table where is record various events like CustomerEventId, DateTime, StatusId, StatusTime, GroupId, ...
I also have a status table (Id, Description) and a group table (Id, Description).
I want to create a report where for a selected date range (From ... To ...) i can see (grouped by date) all status's the customer
went in. The possible status are :
Id Description
-------------------------------------
1 status 1
2 status 2
3 status 3
4 status 4
My query looks something like this :
SELECT CustomerEventId, DateTime, CONVERT(varchar, DateTime), 103) AS DATEVAL, StatusId,
status.description as StatusDescription, StatusTime, GroupId, group.Description as GroupDescription
From Customers inner join status on customers.StatusId = status.id
inner join group on customers.GroupId = group.id
Group By CustomerEventId, DateTime, StatusId, status.description, StatusTime, GroupId, group.Description
My reports has 3 parameters (From date, To date, Group)
In my report i have a table with two groups : GroupByDate (grouped on DATEVAL) and GroupByStatus
now my problem : let's say i have values for statusid 1,2 and 4
then my report will only display those 3 status.
How can i display the status where there is no data for :
now it shows :
DATEVAL Occurrences Time
01/07/2007
Status 1 15 125
Status 2 25 366
Status 4 8 66
I would like it to show:
DATEVAL Occurrences Time
01/07/2007
Status 1 15 125
Status 2 25 366
Status 3 0 0
Status 4 8 66
Anybody (i hope i have provide enough details ...)
Vinnie
View 1 Replies
ADVERTISEMENT
Apr 17, 2007
Hi,
I have the following problem.
I have created different tables in my database with descriptions in from other tables (example : a table named errors with errorid and errordescription as fields in it)
In a report i want to display the total nr of errors during a certain period for a certain department.
i have created that report with a list (by department). in this list i have a table where i group my errors.
until here all ok. when i display my report it shows all the errors.
but what it doesn't show is all the errors who have value 0 (or errors that didn't occur during that period i defined)
how can i display all my errors, even if they did not occur (0 times)
Greetings
vinnie
View 3 Replies
View Related
May 16, 2008
I have a report I'm writing and have got a problem that has stumped me.
The data the report is based in is in this format:
Date Type
1/1/08 A
1/3/08 B
3/1/08 C
3/5/08 B
3/10/08 A
3/12/08 C
3/20/08 A
Management wants a report showing a line chart that summarizes the data by Month and by Type. So, there are 2 series depending on the Type and data values are based on the count of each Type. So, in the example above the x-axis group would be month, the values would be count(Type) and there would be 2 series €“ Series 1. A, B and Series 2. C
I€™ve defined the x-axis to be Month(Fields!DateOccured.Value). However, they want the x-axis to show every month for the entire year not just what is in the database. So, I defined the x-axis to have a scale of 1 to 12 and the major interval is set to 1. This displays 1 through 12 on the x-axis.
The problem is when there is no data (null) for a particular month. Instead of showing 0, the line chart does not plot anything and the line is drawn to the next displayed point. So, for example on the data above the line chart would plot:
January
Series 1 €“ Qty. 2 Series 2 €“ Qty. 0
February
Null
March
Series 1 €“ Qty. 3 Series 2 €“ Qty. 2
The line chart would draw a line from January to March skipping February. I need to display the null values as 0 and not null indicating no occurrences for the month rather than no data present.
Thanks!
View 11 Replies
View Related
May 13, 2015
I am stuck on a query where I need to display all the month year values even if the corresponding count_booking values are NULL. The requirement is to display the 13 month year period from current date.
For e.g. if the date exists in the current month then starting from May 15 go all the way back to Apr 14.
My current query works in terms of displaying all the 13 months if the count_booking values exist for all the months. However, if some months are missing the values then those months don't show up.how to display all the months even if the values are NULL ? Query below:
SELECT COUNT(m.BOOKING_ID) AS count_booking, LEFT(DATENAME(MONTH, m.CREATE_DT), 3) + ' ' + RIGHT('00' + CAST(YEAR(m.CREATE_DT) AS VARCHAR), 2)
AS month_name
FROM MG_BOOKING AS m
WHERE (m.CREATE_DT >= DATEADD(m, - 13, GETDATE()))
[code]...
View 8 Replies
View Related
Jan 25, 2008
I have a pivot transform that pivots a batch type. After the pivot, each batch type has its own row with null values for the other batch types that were pivoted. I want to group two fields and max() the remaining batch types so that the multiple rows are displayed on one row. I tried using the aggregate transform, but since the batch type field is a string, the max() function fails in the package. Is there another transform or can I use the aggragate transform another way so that the max() will work on a string?
-- Ryan
View 7 Replies
View Related
Feb 23, 2007
I have a DTSX package which reads values from a fixed-length text file using a data reader and writes some of the column values from the file to an Oracle table. We have used this DTSX several times without incident but recently the process started inserting NULL values for some of the columns when there was a valid value in the source file. If we extract some of the rows from the source file into a smaller file (i.e 10 rows which incorrectly returned NULLs) and run them through the same package they write the correct values to the table, but running the complete file again results in the NULL values error. As well, if we rerun the same file multiple times the incidence of NULL values varies slightly and does not always seem to impact the same rows. I tried outputting data to a log file to see if I can determine what happens and no error messages are returned but it seems to be the case that the NULL values occur after pulling in the data via a Data Reader. Has anyone seen anything like this before or does anyone have a suggestion on how to try and get some additional debugging information around this error?
View 12 Replies
View Related
Dec 9, 2013
I have SQL Server 2012 SSIS. I have Excel source and OLE DB Destination.I have problem with importing CustomerSales column.CustomerSales values like 1000.00,2000.10,3000.30,NotAvailable.So I have decimal values and nvarchar mixed in on Excel column. This is requirement for solution.However SSIS reads only numeric values correctly and nvarchar values are set as Null. Why?
CREATE TABLE [dbo].[Import_CustomerSales](
 [CustomerId] [nvarchar](50) NULL,
 [CustomeName] [nvarchar](50) NULL,
 [CustomerSales] [nvarchar](50) NULL
) ON [PRIMARY]
View 5 Replies
View Related
Mar 29, 2006
Hi
can somebody explain me how I can assign a NULL value to a datetime type field in the script transformation editor in a data flow task.
In the script hereunder, Row.Datum1_IsNull is true, but still Row.OutputDatum1 will be assigned a value '0001-01-01' which generates an error (not a valid datetime). All alternatives known to me (CDate("") or Convert.ToDateTime("") or Convert.ToDateTime(System.DBNull.Value)) were not successful.
Leaving out the ELSE clause generates following error: Error: Year, Month, and Day parameters describe an un-representable DateTime.
If Not Row.Datum1_IsNull Then
Row.OutputDatum1 = Row.Datum1
Else
Row.OutputDatum1 = CDate(System.Convert.DBNull)
End If
Any help welcome.
View 1 Replies
View Related
May 6, 2014
I have 2 identical tables one contains current settings, the other contains all historical settings.I could create a union view to display the current values from table A and all historical values from table B, butthat would also require a Variable to hold the tblid for both select statements.
Q. Can this be done with one joined or conditional select statement?
DECLARE @tblid int = 501
SELECT 1,2,3,4,'CurrentSetting'
FROM TableA ta
WHERE tblid = @tblid
UNION
SELECT 1,2,3,4,'PreviosSetting'
FROM Tableb tb
WHERE tblid = @tblid
View 9 Replies
View Related
Sep 20, 2006
ad1 ad2
-----------------------------
younge joe
null null
youn null
want a result like that. anyone can help me to do it?
ad1+ad2
-----------------------
younge joe
null
youn
View 6 Replies
View Related
Dec 18, 2006
Hello,
I would like to display the first non null value from my dataset, is this possible? I am aware of first() and last() but what are my options for displaying the aforementioned? Thanks much!
John
View 3 Replies
View Related
Oct 31, 2015
I am using sql server 2012. suppose i have a table called cte which contains id and name columns . in name column there are null value . i want to display top row value instead of null value as like attached image. Here is query :
;with CTE As (
Select 1 as Id , 'Advance' as Name
union all
Select 2 as Id , NULL as Name
union all
Select 3 as Id , NULL as Name
[Code] ...
Expected Result :
I want to write normal select Query. i am not interest to using loop or cursor.
View 5 Replies
View Related
Nov 9, 2000
Hi,
My query "select blah, blah, rank from tablewithscores" will return results that can legitimately hold nulls in the rank column. I want to order on the rank column, but those nulls should appear at the bottom of the list
e.g.
Rank Blah Blah
1 - -
2 - -
3 - -
NULL - -
NULL - -
At present the NULLs are at the top of the list, but I do not want my ranking in descending order. Any suggestions?
Thanks
Dan
View 1 Replies
View Related
Oct 24, 2005
I have a table with 3 fields. when I type
select * from test -- I am getting the results as below.
NAME AGE DEPT
AAA 23 AOD
BBB 27 NULL
CCC NULL NULL
DDD 23 POD
DEPT,AGE are displayed with "NULL" WHEN THERE IS NO value for that field . How can I eliminate this. I need space instead of NULL. When I export to text file there also contains NULL. Let me know how can I eliminate this.
Thanks in advance
View 13 Replies
View Related
May 3, 2015
I have table in sql server for Employee, it has(id, Employee, director),so the director field is id of the director's name,  so the director is employee and has director also, only the first director hasn't director( one Employee has not director);now, i want to use datagridviewer in c# for display as this table (id, employee, director), so the first record will be the (id, employee, '  ');i use this query:"select emp.ID ,emp.Name ,dir.Name as'director'  from table1 emp, table1 dir where (emp.director=dir.ID OR  dir.director IS NULL)"but when i display the datagridviewer , it don't display the first employee(first director) which hasn't director.
View 6 Replies
View Related
Jun 17, 2007
The following is a simplified version of my SQL statement. I am attempting to do a simple count(*) with two groupings and a where clause. This is Select command for a GridView. However, I am unable to display zeros. The rows are completely missing and I would greatly appreciate someone's help. I have already tried Group By All, but that, unfortunately, does not work. Here is my SQL statement:
"SELECT [GENDER], [RACE], COUNT(*) FROM [TABLE] WHERE ([COLUMNNAME] ='SOMETHING') GROUP BY [GENDER], [RACE]"
Thanks for the help in advance!
View 1 Replies
View Related
Sep 3, 2015
I have an SSIS package that imports data from an Excel file, replaces any value in Excel that reads "NULL" to "", then writes the data to a couple of databases.
What I have discovered today, is I have two columns of dates, an admit date and discharge date column, and what I need to do is anywhere I have a null value in the discharge date column, I have to replace it with the value in the admit date column.Â
I have searched around online and tried a few things using the Replace funtion in Derived columns but no dice so far.Â
View 3 Replies
View Related
Sep 23, 2004
Hello Experts:
I want to access the values coming from the table but my code is just printing the varibale name.
e.g. It is printing right now
@lev0
@lev1
@lev2
@lev3
@lev4
but infact in variable @lev1, the actual value from table is [prodcut]. the value in varibale @lev1 is [category].
Can you pl. help me?
--- My code
Declare
@lev0 varchar(50),
@lev1 varchar(50),
@lev2 varchar(50),
@lev3 varchar(50),
@lev4 varchar(50),
@stmnt varchar(2000),
@counter int,
@st varchar(50)
Select @lev0=Dimnsion, @Lev1= Lev1, @Lev2= Lev2, @Lev3= Lev3, @lev4= lev4 from dbo.Lookup where dimnsion = '[Product]'
Set @counter = 0
while @counter < 5
begin
set @st = '@lev'+cast(@counter as varchar(50))
print @st
set @counter= @counter+1
end
-------
Thanks
View 1 Replies
View Related
May 18, 2014
I have the below data with two columns (Posting Date and Pond Crop, construct an SQL where i will pick and display only the TOP 3 Posting date of EACH Pond Crop. I only attached less data but in reality there are lots of Ponds and posting date in this table.
Table Name : Weekly Harvest
Fields:
1. Posting Date
2. PondCrop
Desired Output:
Posting Date PondCrop
2011-12-12 00:00:00.00001PA01-15
2011-12-19 00:00:00.00001PA01-15
2011-12-26 00:00:00.00001PA01-15
2012-03-19 00:00:00.00001PA01-16
2012-03-20 00:00:00.00001PA01-16
2012-03-26 00:00:00.00001PA01-16
Raw Data
Posting Date PondCrop
2011-11-21 00:00:00.00001PA01-15
2011-11-28 00:00:00.00001PA01-15
2011-12-02 00:00:00.00001PA01-15
2011-12-05 00:00:00.00001PA01-15
[Code] ....
View 7 Replies
View Related
Apr 13, 2015
I want the minimum of two values to be display like below without using the case
MIN(3.00,4.00)
output:
3.00
View 2 Replies
View Related
Jun 5, 2015
One Table have 2 Columns.
1.Order_number
2.PSON NUmber
In Table Contains 6 rows with 2 order_numbers and different PSON Number.I want Order Number,PSON1,PSON2,PSON3,PSON4 and its Values
Ex:--Order_number   PSON NUmber
       1           ONT10
       1           ONT11
       1          ONT12
       2          ONT13
        2          ONT14
I want  data :-    Order_number   PSON1      PSON2     PSON3
                 1           ONT10    ONT11    ONT12
                  2            ONT13   ONT14    Null
View 3 Replies
View Related
Jun 5, 2015
I have table that contains below data
Date                             ID           Â
Message
2015-05-29 7:00:00     AOOze           abc
2015-05-29 7:05:00     AOOze           start
2015-05-29 7:10:00     AOOze           pqy
2015-05-29 7:15:00     AOOze           stop
2015-05-29 7:20:00     AOOze           lmn    Â
[code]....
and so on following the series for every set of different ID with 5 entries.I need to Find Maximum interval time for each ID and for condition in given message (between Start and Stop)For example, in above table
-For ID AOOze, in message "start" is logged at 7:05 and stop and 7:15, so interval is 10 mins
-For ID LaOze, in message "start" is logged at 7:30 and stop and 7:45, so interval is 15 mins
I am looking for a sql query that will return in below format
IDÂ Â Â Â MAX interval
AOOze  15
LaOze  10
View 15 Replies
View Related
Jan 3, 2008
Does somebody know how do you get a column in Reporting Services to display the values from two different columns? I don't mean a concat, but the result of the two columns.
This has been a headache for 2 days now.
Thanks!!
View 3 Replies
View Related
Sep 11, 2014
I am having values as below:
99.87
99.96
8.67
And my output should be as:
99.8
99.9
8.6
How can I do this
View 9 Replies
View Related
May 8, 2008
Hi,
I have a table called emp, having 2 field name & sex
values are:
name sex
a 1
b 2
c 1
now i want to display the values in above table as like below...
name sex
a Male
b Female
c Male
How to do that...?
View 11 Replies
View Related
Apr 13, 2007
Null date values within a table in SQL Server are displays as (12/30/1899) by Report Builder. Does anyone know how to display the null value as blank?
Thanks in advance
View 1 Replies
View Related
Aug 9, 2015
I have a table with EquipmentNumber, OrderType, BreakdownIndicator and RowID columns and below are the values for one equipmentnumber,
EuipmentNumber OrderType BreakdownIndicator RowId Flag
145812 PM04 1 Yes
145812 PM07 2 Yes
145812 PM07 3 Yes
145812 PM04 4 Yes
145812 PM07 5
145812 PM07 X 6
 145812 PM07 7
 145812 PM04 8 Yes
145812 PM04 9 Yes
145812 PM04 10 Yes
I need to display the 'Flag' column in the result set as mentioned above to identify the cycle values without breakdown indicator values. Here is the logic for this,
1. Need to set the flag 'Yes' for the cycle values PM04 to PM04 in the OrderType and if there is any breakdownindicator value 'X' then we can not consider that cycle for Flag.
View 12 Replies
View Related
Jan 24, 2008
hi friends
i am using visual studio 2005. i need one combo box which will display two values. one is "Designation" i.e.("clerk,accountant,manager,officer,shopkeeper) and another "Designation ID" i.e.(1,2,3,4,5 and respectively) i made table of "Designation Master" in sql server 2000 including field of "Designation ID, Designation". manually i am inserting id and designation in that table.
what i want exactly i have one customer form which contain a "combobox" for "Designation" column i achieved "Designation ID" and "Designation" in that combo box also but when i will go for save i want that i will store only "Designation ID" i don't want to store "Designation" in my "Designation" column which is in "Customer table" i am attaching code which store "Designation ID" and "Designation" in customer table but i want only "Designation ID" only
bold line which is difficult for me to inserting only "designationId" in customer table.
Inventory_Master.cntData.Open()
cmdstr = "Select DesigID,Designation from Designation_Master"
cmd = New SqlCommand(cmdstr, Inventory_Master.cntData)
cdrCustomer = cmd.ExecuteReader()
If cdrCustomer.HasRows = True Then
While cdrCustomer.Read()
cmddesig = cdrCustomer.Item(0).ToString.PadLeft(1) + cdrCustomer.Item(1).ToString.PadLeft(25)
cbodesignation.Items.Add(cmddesig)
End While
Else
End If
Inventory_Master.cntData.Close()
Inventory_Master.cntData.Open()
cmd = New SqlCommand("insert CUSTOMER(Membership_No,Member_Initial,Member_Name,Member_Birthdate,Gender,Res_Telno,Mobile_No,Res_Addr1,Res_Addr2,Res_City,Res_Pincode,Landmark,Company_Name,Comp_Addr1,Comp_Addr2,Comp_Telno,Comp_City,Comp_Pincode,Designation,Credit_Limit,Income_Mthly,Email_ID,Note) values (@Membership_No,@Member_Initial,@Member_Name,@Member_Birthdate,@Gender,@Res_Telno,@Mobile_No,@Res_Addr1,@Res_Addr2,@Res_City,@Res_Pincode,@Landmark,@Company_Name,@Comp_Addr1,@Comp_Addr2,@Comp_Telno,@Comp_City,@Comp_Pincode,@Designation,Convert(money,@creditlimit),@Income_Mthly,@Email_ID,@Note)", Inventory_Master.cntData)
cmd.Parameters.AddWithValue("@Membership_No", txtmebno.Text)
cmd.Parameters.AddWithValue("@Member_Initial", cbomebname.Text)
cmd.Parameters.AddWithValue("@Member_Name", txtmebname.Text)
cmd.Parameters.AddWithValue("@Member_Birthdate", dtime.Value)
cmd.Parameters.AddWithValue("@Gender", cbogender.Text)
cmd.Parameters.AddWithValue("@Res_Telno", txttelno.Text)
cmd.Parameters.AddWithValue("@Mobile_No", txtmobileno.Text)
cmd.Parameters.AddWithValue("@Res_Addr1", txtresaddr1.Text)
cmd.Parameters.AddWithValue("@Res_Addr2", txtresaddr2.Text)
cmd.Parameters.AddWithValue("@Res_City", txtrescity.Text)
cmd.Parameters.AddWithValue("@Res_Pincode", txtrespin.Text)
cmd.Parameters.AddWithValue("@Landmark", txtlandmark.Text)
cmd.Parameters.AddWithValue("@Company_Name", txtcompname.Text)
cmd.Parameters.AddWithValue("@Comp_Addr1", txtcompaddr1.Text)
cmd.Parameters.AddWithValue("@Comp_Addr2", txtcompaddr2.Text)
cmd.Parameters.AddWithValue("@Comp_Telno", txtcomptelno.Text)
cmd.Parameters.AddWithValue("@Comp_City", txtcompcity.Text)
cmd.Parameters.AddWithValue("@Comp_Pincode", txtcomppin.Text)
cmd.Parameters.AddWithValue("@Designation", cbodesignation.Text.PadLeft(1, CChar(CStr(1)))) [ help me for inserting designation in this line]
cmd.Parameters.AddWithValue("@creditlimit", txtcreditlimit.Text)
cmd.Parameters.AddWithValue("@Income_Mthly", txtincomemthly.Text)
cmd.Parameters.AddWithValue("@Email_ID", txtemailid.Text)
cmd.Parameters.AddWithValue("@Note", rtxtNote.Text)
cmd.ExecuteNonQuery()
Inventory_Master.cntData.Close()
MsgBox("RECORD SAVED")
View 1 Replies
View Related
Sep 18, 2015
I have a table with a column AttributeNumber and a column AttributeValue. The data is like this:
OrderNo. AttributeNumber AttributeValue
1.-Order_1 2001 A
2.-Order_1 2002 B
3.-Order_1 2003 C
4.-Order_2 2001 A
5.-Order_2 2002 B
6.-Order_2 2003 C
So the logic is as follows:
I need to display in my query the values are coming from Order_1, means AttributreValues coming from AttibuteNumbers: 2001,2002,2003...and Order_2 the same thing.
Not sure how to create my Select here since the values are in the same table
View 2 Replies
View Related
Sep 3, 2015
I have a table that contains some data.Â
LabelName
LabelValue
TotalForRetire
10337
dummy1
0
TotalForRelatives
5850
dummy2
0
TotalForDisability
7337
TotalForOrange
23
I have a pie chart and a bar chart.
In the pie chart I want to plot only TotalForRetire and TotalForDisability and TotalForOrange
In the bar chart I want to plot only TotalForRetire,dummy1,TotalForRelatives.
Also, here I want the horizontal axis not to show the label  for dummy1 as the value is 0. How can i do that for each chart?
View 2 Replies
View Related
May 25, 2015
I am new to SSRS. I created a reporting services with 3 groups. I would like to know how to create different colors for each group so that all my values displayed by color group ?.
View 4 Replies
View Related
Apr 18, 2008
Hi.
In my report, I need to display column names (and its values) from my dataset, which uses the stored procedure and within it use the PIVOT statement. I cannot use the matrix control in report since I need to add another static column to the right of the matrix, but since that cannot be done ni SQL SSRS 2005, I need to PIVOT it through stored procedure. The parameter passed to stored procedure is the year and it is used for pivot. The statement looks like this:
@sql = 'SELECT * FROM (SELECT YearId, SchoolId, ReportText, OutputValue_Text from AggregateTable) AS AGAM
PIVOT (MIN(OutputValue_Text) FOR YearId IN ([' + @YearId + '])) PVT'
EXEC(@sql)
So, since the years passed as parameters can change, I cannot hard-code it as column in my report, so I need to programatically display column names and values from my dataset, something like dataSet.Tables[0].Columns[].ColumnName; I have tried with writing the code, but I do not have much experience with it and I have not been very successful. Can someone help me with the code?
Thanks
View 2 Replies
View Related
Sep 24, 2015
In my report I am having one calculation filed, in that field I want to display only two values before decimal point.
For example, if I am having calculation field value as 3456.54, I need to display as 35.54 or 34.54.
View 3 Replies
View Related