Hi all
I want to show two values in one cell.is it possible.
I need to display number and percentage in one cell
Like ---- Number and percentage in Brakets.
10 (20%)
How can i do it?
Pls help me
Hi all
I have two cells,having first cell 0 and other cell 5.
How can i add these two cell values.
I used following expression
=Fields!LITMIN.Value + Fields!NUMMIN.Value
But i am getting Concatenated result ie:05
But i need 5.
How can i do it.Pls help me
I need to put a dynamic table (the amount of rows I control) into a static container (with a fixed size).
View 2 Replies View RelatedHi all,
I am having problem with table control
I added one table control to my report designer.
How can i get horizontal and vertical lines to my table.
Regards.
I have a table that has an image datatype column and I also have acontant type column in that same table to define which type of data isstored in that table.In this case a screen shot or may be a word document may be stored inthat table....!I am trying to use that image datatype field in my report and when theyclick some button I needed the reporting service report to open awindow based on the content type and display that image.Has anyone done this? Any help will be much appreciated...Thanks in advance....
View 1 Replies View RelatedI would like to display a portion of report where there is data or no data
There is data subreport  display  Â
   Product Name Latex Gloves Â
   Product ID   Â
xxxx5678
 There NO data in the subReport
Â
  Product Name             Â
  Product ID  Â
UPDATE #2: When it said "Do you want to install Microsoft SQL Server" I said "yes" and that caused it to work. I exited and re-ran and now the print runs w/o the "install SQL Server" (If the prompt had said "Do you want to install the print dialog" we wouldn't be having this discussion...)
UPDATE: After posting this i discovered that the same thing occurs when attempting to print the report direct from IE6: First a dialog pops up "Do you want to install this software?" Name: Microsoft SQL Server. When I click "Don't Install" I get the dialog "unable to load client print control." Since this happens direct from IE6 I suspect it's browser settings. I'll resume tomorrow and post a followup.
My WinForm C# app integrates Reporting Services by calling them from WebBrowser controls. The problem is attempts to print cause a dialog: "unable to load client print control."
I've read prior posts that say "enable Active-X in your browser" - I don't know how to do that from a WebBrowser control.
Any ideas how to support Reporting Services "Print" from within a WebBrowser control?
RELATED THREADS
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=332145&SiteID=1
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=264478&SiteID=1
Hi,What's the 'new' declarative way to fetch one field from a SQL table and display the result in a Label control?I have a users table with a fullname field. I want to query the table and retrieve the fullname where the usertable.username = Session("loggedinuser")I can make the SqlDataSource ok that has the correct Select query, but not sure how to bind the label to that.thanks,Bruce
View 4 Replies View Related
I am trying to use a reportviewer control (processing mode = remote) to view a rdl that is hosted on a server running MOSS, the reporting services are run in "sharepoint integrated mode". When i try to set the path to the RDL on the control like i usually do for an ASP.NET ReportViewer control, i get the error message posted below. I cant find anything on google, Please HELP
Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'. The request failed with the error message: -- <HTML dir="ltr"> <HEAD><meta name="GENERATOR" content="Microsoft SharePoint" /><meta name="progid" content="SharePoint.WebPartPage.Document" /><meta HTTP-EQUIV="Content-Type" content="text/html; charset=utf-8" /><meta HTTP-EQUIV="Expires" content="0" /><meta name="ROBOTS" content="NOHTMLINDEX" /><title> Error </title><link rel="stylesheet" type="text/css" href="/_layouts/1033/styles/core.css?rev=5msmprmeONfN6lJ3wtbAlA%3D%3D"/> <script type="text/javascript" language="javascript" src="/_layouts/1033/init.js?rev=VhAxGc3rkK79RM90tibDzw%3D%3D"></script> <script type="text/javascript" language="javascript" src="/_layouts/1033/core.js?rev=F8pbQQxa4zefcW%2BW9E5g8w%3D%3D"></script> <meta name="Robots" content="NOINDEX " /> <meta name="SharePointError" content=""/> </HEAD> <BODY scroll="yes" onload="javascript:if (typeof(_spBodyOnLoadWrapper) != 'undefined') _spBodyOnLoadWrapper();"> <form name="aspnetForm" method="post" action="../../_layouts/error.aspx" id="aspnetForm" onsubmit="return _spFormOnSubmitWrapper();"> <div> <input type="hidden" name="__VIEWSTATE" id="__VIEWSTATE" value="/wEPDwUKLTU2NjkxODU3M2RkBsUItbjjuHbcaHeDmf91mLp59DY=" /> </div> <TABLE class="ms-main" CELLPADDING=0 CELLSPACING=0 BORDER=0 WIDTH="100%" HEIGHT="100%"> <tr><td> <table CELLPADDING=0 CELLSPACING=0 BORDER=0 WIDTH="100%"> <tr> <td colspan=4 class="ms-globalbreadcrumb" align="right"> <a href="javascript:TopHelpButtonClick('NavBarHelpHome')" id="ctl00_PlaceHolderGlobalNavigation_TopHelpLink" AccessKey="6" title="Help (new window)"><img src="/_layouts/images/helpicon.gif" align="absmiddle" border="0" alt="Help (new window)" /></a> </td> </tr> </table> </td></tr> <tr> <td class="ms-globalTitleArea"> <table width=100% cellpadding=0 cellspacing=0 border=0> <tr> <td id="GlobalTitleAreaImage" class="ms-titleimagearea"><img id="onetidHeadbnnr0" src="/_layouts/images/titlegraphic.gif" alt="" /></td> <td class="ms-sitetitle" width=100%> </td> <td style="padding-top:8px;" valign=top> </td> </tr> </table> </td> </tr> <TR> <TD id="onetIdTopNavBarContainer" WIDTH=100% class="ms-bannerContainer"> </TD> </TR> <TR height="100%"><TD><TABLE width="100%" height="100%" cellspacing="0" cellpadding="0"> <tr> <td class="ms-titlearealeft" id="TitleAreaImageCell" valign="middle" nowrap><div style="height:100%" class="ms-titleareaframe"></div></td> <td class="ms-titleareaframe" id="TitleAreaFrameClass"> <table cellpadding=0 height=100% width=100% cellspacing=0> <tr><td class="ms-areaseparatorleft"><IMG SRC="/_layouts/images/blank.gif" width=1 height=1 alt=""></td></tr> </table> </td> <td valign=top id="onetidPageTitleAreaFrame" class='ms-areaseparator' nowrap width="100%"> <table id="onetidPageTitleAreaTable" cellpadding=0 cellspacing=0 width=100% border="0"> <tr> <td valign="top" class="ms-titlearea"> <a href="http://xjthdqdwd03:8080/bi" id="ctl00_PlaceHolderTitleBreadcrumb_idSimpleGoBackToHome">Go back to site</a> </td> </tr> <tr> <td height=100% valign=top ID=onetidPageTitle class="ms-pagetitle"> <h2 class="ms-pagetitle"> Error </h2> </td> </tr> </table> </td> <td class="ms-titlearearight"> <div class='ms-areaseparatorright'><IMG SRC="/_layouts/images/blank.gif" width=8 height=100% alt=""></div> </td> </tr> <TR> <TD class="ms-leftareacell" valign=top height=100% id="LeftNavigationAreaCell"> <table class=ms-nav width=100% height=100% cellpadding=0 cellspacing=0> <tr> <td> <TABLE height="100%" class=ms-navframe CELLPADDING=0 CELLSPACING=0 border="0"> <tr valign="top"> <td width="4px"><IMG SRC="/_layouts/images/blank.gif" width=4 height=1 alt=""></td> <td valign="top" width="100%"> </td> </tr> <tr><td colspan=2><IMG SRC="/_layouts/images/blank.gif" width=138 height=1 alt=""></td></tr> </TABLE> </td> <td></td> </tr> </table> </TD> <td> <div class='ms-areaseparatorleft'><IMG SRC="/_layouts/images/blank.gif" width=8 height=100% alt=""></div> </td> <td class='ms-formareaframe' valign="top"> <TABLE width="100%" border="0" cellspacing="0" cellpadding="0" class="ms-propertysheet"> <TR valign="top" > <TD class="ms-descriptiontext" width="100%"> </TD> <TD ID=onetidYPadding width="10px"><IMG SRC="/_layouts/images/blank.gif" width=10 height=1 alt=""></TD> </TR> <TR > <TD ID=onetidMainBodyPadding height="8px"><IMG SRC="/_layouts/images/blank.gif" width=1 height=8 alt=""></TD> </TR> <tr> <td valign="top" height="100%"> <A name="mainContent"></A> <table width=100% border=0 class="ms-titleareaframe" cellpadding=0> <TR> <TD valign=top width="100%" style="padding-top: 10px" class="ms-descriptiontext"> <span id="ctl00_PlaceHolderMain_LabelMessage">The file you are attempting to save or retrieve has been blocked from this Web site by the server administrators.</span> <P><span class="ms-descriptiontext"> <span id="ctl00_PlaceHolderMain_helptopic_troubleshooting"><A Title="Troubleshoot issues with Windows SharePoint Services. - Opens in new window" HREF="javascript:HelpWindowKey('troubleshooting')">Troubleshoot issues with Windows SharePoint Services.</A></span> </span> </TD> </TR> </table> <script type="text/javascript" language="JavaScript"> var gearPage = document.getElementById('GearPage'); if(null != gearPage) { gearPage.parentNode.removeChild(gearPage); document.title = "Error"; } </script> </td> </tr> </table> </td> <td class="ms-rightareacell"> <div class='ms-areaseparatorright'><IMG SRC="/_layouts/images/blank.gif" width=8 height=100% alt=""></div> </td> </TR> <tr> <td class="ms-pagebottommarginleft"><IMG SRC="/_layouts/images/blank.gif" width=1 height=10 alt=""></td> <td class="ms-pagebottommargin"><IMG SRC="/_layouts/images/blank.gif" width=1 height=10 alt=""></td> <td class="ms-bodyareapagemargin"><IMG SRC="/_layouts/images/blank.gif" width=1 height=10 alt=""></td> <td class="ms-pagebottommarginright"><IMG SRC="/_layouts/images/blank.gif" width=1 height=10 alt=""></td> </tr> </TABLE></TD></TR> </TABLE> <input type="text" name="__spDummyText1" style="display:none;" size=1/> <input type="text" name="__spDummyText2" style="display:none;" size=1/> </form> </BODY> </HTML> --.
Hi All
Is it possible to add datetime picker (Calendar Control)
in 2000 reporting services
Cheers
Hi all
I have taken Marix control in my report,But i am unable to increse Rows and cols.
How can i make it?
Reagards.
I need to design a report like as below
Location jan feb mar april total %
abc 1 2 1 1 5 % calculated value
ddd 1 1 1 1 4 % calcualtedvalue
------------------------------------------------------------------------------------------------------
total 2 3 2 2 9 total(%calculated value)
i was able to get everything except last column. i am using Matrix control. can any one help me how to another column after sub total in matrix control.
I am trying to print only the grand total raw. The grand total is based on the information in the groups and therefore I cannot hide the groups.
Instead I am trying to minimize the size of the group raw by sizing font, shrink, etc but with no success. I still get a lot of unwanted space. How can resolve this?
I have a report (stored procedure) that I have set up in SQL 2005 Reporting Services. I've designed this report (using SQL server business intelligence studio), and several other reports, thinking that running totals or summing may be the issue, but it hasn't been. The latest iteration has been just a display of product info, about 100 records, no fields formatted or summed. Very very simple, straight-forward report. If I go to the Report server & upload the rdl file, it displays fine, performs as it should, paging & exporting - everything works fine. The issue comes up when in a web app, I put a Reportviewer control on the page, and call the report.
It works, sort of.
Originally, I had written the page using ASP.NET AJAX Enabled web project, and I had been using the Tab Container on the page. What happens is when I open it on that tab (I am using AJAX Tab panels, which had been working fine without this behavior prior to finally getting the reportviewer working), and the report displays, the "e" on Internet explorer at the top of the tab now flickers, like the page is reloading. It also runs the CPU up to 100% on the computer and although I can go from tab to tab in it (I am using AJAX tab panels in the page), it will take like up to a minute to go to the next tab. I'm not doing anything really data-intensive on those tabs, and they had been functioning fine prior to putting in the report viewer (i.e. they weren't flickering & clocking the CPU).
Thinking that the Tab Container may be the issue, I created just a plain AJAX Enabled web project and put the same reportviewer on it. Same performance. It'll display the report, and then take the system up to 100% and stay there until I kill the browser.
After that, I did just a plain old ASP.Net web project and put the report viewer control on it. Same result. The report will display, but as soon as it does, the "e" on Internet Explorer tab starts flickering and you see the CPU go to 100% and stay there. I've left it for 20-30 minutes with no change. It appears as if the page is constantly refreshing.
Thinking that the issue may be related to having the reportviewer report hard coded in the app, I put a button on the page, and assigned the button to put in the report. It displays, but it again runs the CPU up to 100% and stays there.
I thought that having Asynch = True (run the report asynchronously) might be the issue, but setting it to false made no difference.
I eventually have to kill the page to do anything, because it has the system up to 100%.
The code I am using on this page follows:
Here's the code in the codefile:
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
If Not Page.IsPostBack Then
Me.ReportViewer1.Visible = False
End If
ReportViewer1.ServerReport.ReportPath = ""
End Sub
Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click
ReportViewer1.Visible = True
ReportViewer1.ServerReport.ReportPath = "/BA10listing"
End Sub
The code in the aspx part of the page:
<%@ Page Language="VB" AutoEventWireup="false" CodeFile="Default.aspx.vb" Inherits="_Default" %>
<%@ Register Assembly="Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"
Namespace="Microsoft.Reporting.WebForms" TagPrefix="rsweb" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
<title>Untitled Page</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:Button ID="Button1" runat="server" Text="Button" />
<rsweb:ReportViewer ID="ReportViewer1" runat="server" Font-Names="Verdana" Font-Size="8pt" Height="400px" ProcessingMode="Remote" Width="400px" AsyncRendering="False" ShowDocumentMapButton="False">
<ServerReport ReportPath="/BA10listing" ReportServerUrl="http://mycomputer/ReportServer$SQL2005/" />
</rsweb:ReportViewer>
</div>
</form>
</body>
</html>
.... so you can see there's a lot going on here. The report returns ~100 records or so, no calculations, no summation, no grand totals. Basically a "nothing" report, just listing product info data.
In SQL Reporting Services in the web browser, this report displays fine, no problems. It's only when I call it from the Reportviewer inside a web page that it hangs.
Any idea why reportviewer might make this act this way?
My system is running Windows XP, VS 2005, I have both SQL 2000 and SQL 2005 on this same box. I have a server that has both SQL 2000 & SQL 2005 on it as well, and the behavior is the same for both, whether I run the web page with the Reportviewer control on it with the report being on the local system, or the remote system.
Any help or advice would be very much appreciated.
Thanks!!!
SC
I am using VS 2010 and the SSRS that came with it. I am sure its SSRS 2008. Anyway, I added a report file to the project, added an ObjectDataSource and connected this to SQLServer 2008, and display the dataset on the report. The report is using ScriptManager, ReportViewer1, and Report1.rdlc file. I preview the dataset and I have multiple row returned. The problem is I only have one row displayed on the report. Maybe I did a quick and dirty report? What setting of properties did I missed?
View 8 Replies View Related
I have a file directory of tiff images that I need to display dynamically with reporting services. I receive the following error message: "The value of the MIMEType property for the image €˜image1€™ is €œimage/tiff€?, which is not a valid MIMEType." After looking it up sure enough tiff is not a valide type. Does anyone know of a way to display tiff images in reporting services.
Thanks,
Ross
I have a database that yield 50 different reason codes
=Fields!Reasons_Type.Value
Each reasons code yields a total
i.e.
Appeal 4
Loss 5
Won 0
How can I display all 50 rows of data regardless if there is a total value.
I have Successfully deployed the report in Report Server.
And i also successfully called it from Web application using VS 2005.
But the problem is,I am able to view only half of the report in Web Browser.It was Shrinked to Left side of the browser.
I am getting total report when i browse from Report Server URL directly.
Any body pls help me to solve this.
I am just wondering if i can control the access of range of variables from users' logins.
To be more specific, if i a parameter alpha has five values (1,2,3,4,5) and then i have 3 users A, B C, what i need is:
1. A can access Vaues(1, 3)
2. B can access Values (2, 4)
3. C can access Values(3,5)
Is there anyway i can do this either from the stored procedure i am getting the data or i can do it on SSIS development side?
I defined my input parameter as date/time but it doesn't have a time picker where we can accept user input.
The calendar is great but time picker is missing.
Is there any add-in or tweaks I can use to get that feature ?
The alternative solution which uses drop down with some preset values are not feasible for me. All I need is just the time picker similar to adjust time in Windows.
I have a matrix report:
My Expression in the data fields inside design mode is:
IIF(Fields!Row_num.Value mod 2 ,"White","LightGrey")
I am using a Dense rank Function at the dataset level in order to group id column wise. So Fields!Row_num.Value comes from that set.
Earlier it was BLANK values: Please see below for reference.
Tried IsNull on SQL Server already and does not work because there are no NULLs in the data I am retrieving. The empty cells happen when the matrix creates the crosstab report - where there is no data for a column. Everything else works well except the BLANK values being not colored as you see in the screen shot, im using ISNOTHING function to achieve those 0's if NULLS inside the report. But though we have a value inside the cell coming from report it does not colour the entire group.
My requirement is coloring the entire column group irrespective of the NULLs' or Blanks.
Have also tries several functions, but of no use. I am missing with a tiny thing I guess which I am unable to figure out.
Other Functions Tried:
=IIF(VAL(ReportItems!ROWCOLOR.Value) MOD 2,"WHITE","LightGrey")
=iif(RunningValue(Fields!City.Value,CountDistinct,Nothing) Mod 2, "LIGHTBLUE", "SILVER")
=iif(RunningValue(Fields!DQLogDateTime.Value,CountDistinct, Nothing) MOD 2, "LightGrey","White")
I have a report created in Business Intelligence Project.I want to trigger my report result. If it has no returned value, it creates error message displayed on the screen. How could I do this?
Any guidance please.
thanks
-Ron-
I have created a table and want to display a datset. One of the fields in the dataset is 'month' which I need displayed across the top of the report. The other information should make up the rows.
How do I get it to list the Month across the page rather than down?
I want a ssrs report with two tables adjacent,using same data set. I want to start row number/records in second table where rownumber of first table ends.and in second page first table should start where second table of first page ends.
View 10 Replies View RelatedHi,
We have stored some chinese characters in SQL database with datatype as nvarchar, but they are displayed in RS as some weird characters.
like this: 耹±Ã¥€¢€ 耹±Ã§¾Å½Ã¨¸Ã¨€°Ã¥€¢€ Ã¥€¹„¢(耚¡)Ã¥€¦¬Ã¥¸Ã¥°Ã§£Ã¥Ë†€ Ã¥€¦¬Ã¥¸
When we code the asp pages, we put the following on each page to display the chinese characters properly.
<meta http-equiv="CONTENT-TYPE" content="TEXT/HTML; CHARSET=UTF-8">
So my question is what do I need to do in RS in order to show the chinese characters properly as well ?
Many thanks!
Hi all,
I have one problem to display report.
I have 6 fileds in my Dataset.I have to display 4 fileds in one row.
After that I have to display other 2 fields in next row.
Second row may have more than one record based on last field of the first Row.
How can i place my fields at the time of Design.
Example.
suppose x,y,z,p,s,t are fields
x y z p(1st row)
in this row values for x,y,z,p fileds
s t
xxxxxxxxxx xxxxxxxxx(2 records)
yyyyyyyyyy yyyyyyyyyy
x y z p
in this row values for x,y,z,p fileds
s t
xxxxxxxx xxxxxxxxxxx(1 Record)
x y z p
in this row values for x,y,z,p fileds
s t
xxxxxxxxxx xxxxxxxxx(3 Records)
yyyyyyyyyy yyyyyyyyyyy
zzzzzzzzzz zzzzzzzzzzz
How can i display this.
Thanks and Regards
Hi ,
How can I hide the URL information when I open a report, some with parameters and some do not have
parameters. Is there anyway or properties in RS that I can set to have it hide all the important information,
like datasource, credentials, parameters, and display the report like a aspx page instead?
Or does this need to have special programming to make this happen? and if so, what do I need to do?
thanks very much
I have a report that displays fine in VS 2005 (in the Preview tab), and if I hit it via a URL in IE as a deployed report. However, when I embed it in a ReportViewer control for display on a web site, I get no data back for the report. I am using an Oracle database for the data source. None of the the logs in reporting services show anything wrong, there are no events in the event viewer to indicate any problems, Oracle logs also show no problems and no errors are returned to the page when the "View Report" button is clicked.
Anyone out there have a clue? I certainly don't.
Mike
We have recently upgraded our .Net web application from a windows 2003 server to a windows 2012 server. Since this happened users that are trying to print a reporting services report is getting the error "Unable to load client print control". We are using reporting services 2012, but the application is using the 8 version of the viewer. The reporting services server did not change only the application server. The code for the application did not change.
View 4 Replies View RelatedI have used my parameter value in where clause of my dataset control SQL query. When I choose a single value in my multiple-value parameter then I get output as expected. Hovewer when I choose multuple values I get an arror:
Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.
----------------------------
Query execution failed for dataset 'DATABASE'. (rsErrorExecutingCommand)
----------------------------
An error has occurred during report processing. (rsProcessingAborted)
I am convinced that it's a syntax problem. Is there a way I can change syntax of data output from query:
select @parameter
I need output to be like: value, value, value ... etc.
The dataset control query looks something like the following:
select
ID,
a,
b,
c,
d
from DATASET.dbo.Table
where ID in (select @parameter)
I have been searching through google for weeks to solve this and got this far and got stuck. Is it possible at all to achieve what I am looking for?
I want to Change parameter position in SSRS report.I need Start Date and End Date Parameter at same column so client can easily select Start Date and End Date.I have tried a lot but not succeed.
How Can I change the position of Start Date and End Date.I can't change order of other three parameter Select Institutions, Select Author and Course Pack Names parameter because they are internally related to each other(forward dependencies are there).
I am working with vs2013 and have developed ssrs report in ssdt that creates RDL files, I want to view this report in asp.net web page using vs 2013 Reportviewer control. How do I do that? What are the proper steps to configure reportviewer control.so I can view ssrs report through vs2013 ultimate edition.
View 2 Replies View RelatedI have a doubt ,while doing report, I have month column, I have passed 11 in  month parameter, but I want to display month column as NOV not 11.Â
View 2 Replies View Related