Display Query Results Horizontally One ID/row
Feb 6, 2003
I have a table where the ID column is a forign key as shown below:
select * from Joel_Table
IDID_Value
1One
2Two
3Three
1Four
2Five
3Six
1Seven
2Eight
3Nine
1Ten
Now, I order the result set based on the ID column:
select ID, ID_Value from Joel_Table
group by ID, ID_Value
order by ID, ID_Value
IDID_Value
1Four
1One
1Seven
1Ten
2Eight
2Five
2Two
3Nine
3Six
3Three
I want though to order the result set as one ID per row:
ID ID_Value ID_Value ID_Value ID_Value
1 Four One SevenTen
2 Eight Five Two
3 Nine Six Three
What is the best way of accomplishing this task?
Thank you much in advance -
View 2 Replies
ADVERTISEMENT
Feb 12, 2008
Hello. I currently have a website that has a table on one webpage. When a record is clicked, the primary key of that record is transfered in the query string to another page and fed into an sql statement. In this case its selecting a project on the first page, and displaying all the scripts for that project on another page. I also have an additional dropdownlist on the second page that i use to filter the scripts by an attribute called 'testdomain'. At present this works to an extent. When i click a project, i am navigated to the scripts page which is empty except for the dropdownlist. i then select a 'testdomain' from the dropdownlist and the page populates with scripts (formview) for the particular test domain. what i would like is for all the scripts to be displayed using the formview in the first instance when the user arrives at the second page. from there, they can then filter the scripts using the dropdownlist.
My current SQL statement is as follows.
SelectCommand="SELECT * FROM [TestScript] WHERE (([ProjectID] = @ProjectID) AND ([TestDomain] = @TestDomain))"
So what is happening is when testdomain = a null value, it does not select any scripts. Is there a way i can achieve the behaivour of the page as i outlined above? Any help would be appreciated.
Thanks,
James.
View 1 Replies
View Related
Jul 8, 2006
sample results: <MRNID=10002><VesselCode=VSL1>
wherein MRNID and VesselCode are primary keys of the table.
View 3 Replies
View Related
Feb 12, 2008
When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says.
Command(s) completed successfully.
What I really need it to do is to display the results of the query. Does anyone know how to do this?
declare @SniierId as uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare @SniierAlias as nvarchar(50)declare @AlwaysShowEditButton as bitdeclare @SniierName as nvarchar (128)/* Check access for Sniier */SELECT TOP 1 @SniierName = Sniiers.SniierName, @SniierAlias = Sniiers.SniierAlias, @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId
View 3 Replies
View Related
Mar 3, 2005
Hi,
I don't know if anyone has encountered this before but here goes:
I've a select clause below:
result = "Select * from person where LocalName LIKE N'" + queryLocalName + "'"
queryLocalName is an input field that allows the user to search for non-English characters in the database.
What I'm wondering is what kind of effect is the N in the where clause is having?
I can't seem to get it to work when doing it via the web. I've tested in the database itself, got it to work using the SQL Analyser but when testing on the web, it can't find because ? are appearing in the result.
View 2 Replies
View Related
Feb 26, 2008
Hi,
If the Database query returns no rows how do I display a message in the Report Viewer using expressions??
Thanks.
View 4 Replies
View Related
Apr 15, 2015
I have a query that calculates sales by sales person, but it displays horizontally across my query window. Is their a way in SQL Server to have the data display vertically down the window instead?
This is my current query
Code:
Select
count(case when salesman Like 'Geo%' then id else null end) As [George]
,count(case when salesman Like 'Li%' then id else null end) As [Lisa]
,count(case when salesman Like 'Jor%' then id else null end) As [Jorge]
,count(case when salesman Like 'Ri%' then id else null end) As [Richard]
,count(case when salesman Like 'Geo%' then id else null end)+count(case when salesman Like 'Li%' then id else null end) As [Team 1 Sales]
,count(case when salesman Like 'Jor%' then id else null end)+count(case when salesman Like 'Ri%' then id else null end) As [Team 2 Sales]
from sales.southeastregion
Which of course shows the results as such
George --- Lisa --- Jorge --- Richard --- Team 1 --- Team 2
100 50 10 90 150 100
And I want the data to be displayed like
George - 100
Lista - 50
Jorge - 10
Richard - 90
Team 1 - 150
Team 2 - 100
This is SQL Server 2008 if that matters.
View 5 Replies
View Related
Feb 11, 2008
I have an issue with some data that has a leading ASCII char 160 (the "a" with the accent mark) but it shows in query results as a space.
... where customername like char(160) + '%'
returns 2 rows but shows the customer name with a leading space. How would I change the collation or do otherwise to get this character to display correctly in the results?
Thanks!
-Dave
View 6 Replies
View Related
May 25, 2007
How to connect to a analysis server 2005 cube,execute a mdx query and display result in a aspx page?
Please guide me
View 1 Replies
View Related
Jun 10, 2006
Hi this is the first time i am using sql and i have a problem with displaying the data in the way i want.
i have the following table:
EmpID Cust_Name
1 Mary
1 John
2 David
2 John
Annd i am trying to get it to display like this on the UI
EmpID Cust_Name
1 Mary, John
2 David, Andrew
is there anyway to do this?
View 1 Replies
View Related
Oct 5, 2006
Lets say you have to retrieve some SQL.Then you have to go through those records and delete some items, change some values, and even add columns and rows...based on logic that depends on the data you got.Thanks.
View 2 Replies
View Related
Mar 13, 2001
Hi,
I made a table to display information from northwind database. It displays fine on IE5.0 but will only show the first line in netscape.
Do you know what it may be???
View 2 Replies
View Related
Jan 30, 2004
I have a column in the following select startement called displayvalue. Displayvalue is a varchar column. Primary everything entered into this column is numeric, but there are times when NR is entered. In the select query if it sees NR, I would like to have NR changed in the resultset to NULL or blank. NR doesn't come up all of the time, but I have not idea how to do this in the select statment.
Here goes..
SELECT SAMPLE.SAMPLEID, SAMPLE.U_WORKORDERNUMBER, SAMPLE.U_SAMPLEDATETIME, SDI.PARAMID, SDI.DISPLAYVALUE
FROM SAMPLE SAMPLE, SDIDATAITEM SDI
WHERE ( (SAMPLE.SAMPLEID = SDI.KEYID1) AND
(SAMPLE.U_WORKORDERNUMBER = '0060') AND (SAMPLE.U_SAMPLEDATETIME > '31-DEC-2003') AND (SDI.PARAMID = 'BOD') )
ORDER BY SAMPLE.SAMPLEID ASC, SDI.PARAMID ASC
View 1 Replies
View Related
Oct 13, 2004
Hello,
I am working on a project that displays images. Before you can get to the image, you have to select a category that the image may be in. After that, you select the sub categories. I am trying to display a count of the number of records that the subcategories contain. Here is an example:
The user can make a selection from the categories listed below:
Geographic Area
Time Period
Topic
Record Type
If the user selects time period, he/she is taken to a list of subcategories. I would like to display the subcategories with a count of the number of records that will be displayed if it is selected. Listed below is an example of what this would look like:
Colonial (10) -----the number in parenthesis is the number of records that will be displayed if selected------
Gilded Age (12)
Revolutionary (9)
Progressive Era (22)
Is there a way to display the number in parenthesis using ASP.Net and SQL Server 2000? Any clues will be greatly appreciated.
Thanks
View 6 Replies
View Related
May 5, 2008
Dear Pals,
I have small requirement in my project.
I need to display the results of the WHERE clause based on percentage/ranking of exact match.
I mean the result set should be displayed based on percentage match.
For example i have the below table.
create table test
(
id int identity(1,1) primary key,
ename varchar(10)
)
insert into test(ename) select 'REG'
insert into test(ename) select 'xyz'
insert into test(ename) select 'abc'
insert into test(ename) select 'Reg'
insert into test(ename) select 'Regsxysn'
insert into test(ename) select 'psReg'
I need the output something similar as below
REG
Reg
Regsxysn
psReg
I have tried out with full text indexing but i could'nt get the required output.
Any suggestions would be appreciated.
Thanks in Advance.
View 1 Replies
View Related
May 5, 2008
Dear Pals,
I have small requirement in my project.
I need to display the results of the WHERE clause based on percentage/ranking of exact match.
I mean the result set should be displayed based on percentage match.
For example i have the below table.
create table test
(
id int identity(1,1) primary key,
ename varchar(10)
)
insert into test(ename) select 'REG'
insert into test(ename) select 'xyz'
insert into test(ename) select 'abc'
insert into test(ename) select 'Reg'
insert into test(ename) select 'Regsxysn'
insert into test(ename) select 'psReg'
I need the output something similar as below
REG
Reg
Regsxysn
psReg
I have tried out with full text indexing but i could'nt get the required output.
Any suggestions would be appreciated.
Thanks in Advance.
View 3 Replies
View Related
Jun 9, 2014
I have a single column returned from a select statement. How can I have this returned as a vertical string? I looked into using PIVOT but my scenario seems too simple to use Pivot. I'm not requiring any aggregate functions or anything.
So, I want to turn this:
SELECT CountyNames + ',' FROM Counties
---------------------
County1 ,
County2 ,
County3 ,
..etc
TO:
County1, County2, County3...etc
Please note that the list of rows is unknown. Could be 1. Could be 50.
View 2 Replies
View Related
Apr 6, 2015
I written a proc to display the list of Indexes But I needed to print the database where the objects do belong to. How I should write the Dynamic script to add the database Id? I thought to use derived table kind of stuff, but unable to find a solution.
ALTER PROC [dbo].[USP_INDEXCHECK]
AS
DECLARE @sql NVARCHAR(max)
DECLARE @DB VARCHAR(max)
DECLARE databasecursor CURSOR FOR
[Code] .....
View 2 Replies
View Related
Jun 19, 2015
I am trying to calculate the time difference between the value in the row and the min value in the table. So say the min value in the table is 2014-05-29 14:44:17.713. (This is the start time of the test.) Now say the test ends at 2014-05-29 17:10:17.010. There are many rows recorded during that start and end time, for each row created a time stamp is created. I am trying to calculate the elapsed time and have it as a row in the results.
min(timestamp) - timestamp(value in row) = elapsed time for that test
where Channel = '273'
Here is the table DDL
CREATE DATABASE SpecTest;
USE SpecTest
GO
CREATE TABLE [dbo].[Spec1](
[Spec1ID] [int] IDENTITY(1,1) NOT NULL,
[Channel] [int] NOT NULL,
[Code] ....
Here is some dummy data to use
INSERT INTO Spec1 (Channel, Timestamp, Lambda, Power)
VALUES(273, '2014-05-29 14:44:17.713', 800, '-64.91');
INSERT INTO Spec1 (Channel, Timestamp, Lambda, Power)
VALUES(273, '2014-05-29 15:05:09.507', 800, '-59.11');
INSERT INTO Spec1 (Channel, Timestamp, Lambda, Power)
[Code] ....
Example desired results (I hope the formatting works)
Channel | Timestamp | Lambda | Power | Elapsed_Time
______________________________________________________________
273 | '2014-05-29 14:44:17.713', | 800, | '-64.91' | 0
273 | '2014-05-29 15:05:09.507', | 800, | '-64.91' | 00:20:51
273 | '2014-05-29 15:26:00.520', | 800, | '-64.91' | 00:41:42
273 | '2014-05-29 16:28:34.213', | 800, | '-64.91' | 01:44:16
273 | '2014-05-29 16:49:25.853', | 800, | '-64.91' | 02:05:08
273 | '2014-05-29 17:10:17.010', | 800, | '-64.91' | 02:25:59
View 9 Replies
View Related
Apr 1, 2007
hi, like, if i need to do delete some items with the id = 10000 then also need to update on the remaining items on the with the same idthen i will need to go through all the records to fetch the items with the same id right? so, is there something that i can use to hold those records so that i can do the delete and update just on those records and don't need to query twice? or is there a way to do that in one go ?thanks in advance!
View 1 Replies
View Related
Oct 4, 2006
Please help. I'm completely new to SSIS, and I was hoping someone could point me in the right direction(s).
I am developing a winforms client app, and I need to be able to provide the user with the ability to import data in CSV format into our application's database.
I'd like to use SSIS if possible, as long as what I am trying to do isn't near impossible.
I'm thinking of a UI where the user can specify a flat file (CSV) to upload and be processed by an SSIS package on a remote database server.
This package will be responsible for validating the CSV file and inserting data into the database as appropriate.
Is there a way I can:
launch an SSIS package remotely, from a winforms app on the client machine that is not running SQL server (preferably asynchronously) -- and pass it some parameters, including the import file itself
(optionally) provide progress feedback to the client pc to let them know it is being processed
display a nice SSRS report on the client upon completion that tells them exactly what the success/failure of the import was (how many rows processed, which ones failed and why, etc)
Any helpful examples, links, etc would be most appreciated.
Thanks in advance!
View 1 Replies
View Related
Feb 22, 2008
Is there a way to display my querry horizontally?
View 2 Replies
View Related
Feb 7, 2008
In sql server, multiple instances of data default to a row display or vertical. I need a set of data in sql2005 to view horizontally so I can us it in a crystal report. Here is my issue.
gift.HonorKey, gift.HonorName, gift.HonorId
1211 Smith 1222
1244 Owens 4155
I need for the data to read like this:
HonorKey1, HonorKey2, HonorName1, HonorName2, HonorId1, Honorid2
1211 1244 Smith Owens 1222 4155
the table name is gift_view
I would like to be able to create a view in sql analyzer, then save as an SQL View
My direct email is jackfam@comcast.net
View 3 Replies
View Related
May 28, 2008
ok can someone tell me why i get two different answers for the same query. (looking for last day of month for a given date)
SELECT DATEADD(ms, - 3, DATEADD(mm, DATEDIFF(m, 0, CAST('12/20/2006' AS datetime)) + 1, 0)) AS Expr1
FROM testsupplierSCNCR
I am getting the result of 01/01/2007
but in query analizer I get the result of
12/31/2006
Why the different dates
View 4 Replies
View Related
Apr 1, 2014
I would like for each of the queries to have all of the selected fields shown horizontally in one table.
For example,
Commercial Created | Commercial Closed | Commercial UserId | Residential Created | Residential Closed | Residential UserId | Other Created | Other Closed | Other UserId.
Here is what I have now and it is displaying the fields as I would like them to. In the code below, each Views is acting as an individual table and then joined together to make another table when the query is executed.
WITH t1 AS (
SELECT vSalesReportProcessDetail.[RequestId]
,vSalesReportProcessDetail.Process
,vSalesReportProcessDetail.Entered
,vSalesReportProcessDetail.Closed
/*ROW_NUMBER() over (ORDER BY vSalesReportProcessDetail.[RequestId]) rn*/
FROM[Sales].[dbo].[vSalesReportProcessDetail]
WHERE Process = 'Commercial' ),
[code]....
View 1 Replies
View Related
Nov 11, 2005
My project is to automate testing of Stored Proceduresof type SELECT (at least for now).I want to create a table where each stored procedure'sinput parameter values are entered and in another tablethe expected result value(s) are entered when executedagainst a sample database containing manually enteredand verified data.My current problem is that the stored procedures' inputparameters range from none to 50 parameters (ok nowthat I think of it maybe this SP with 50 parameters is anINSERT SP; regardless let's assume I have SPs thatrequire 10-20-30+ parameters).My other problem is each stored procedures' returnedresult could fall into any of these four categories:- 1 row, 1 column- 1 row, many columns- many rows, 1 column- many rows, many columnsSo far I thought about 3 ways of storing the data:1- 1 large table with 50 columns that can hold variousnumber of input parameter values. Similar type of table forholding the output result for the four categories above.2- 1 small table holding one value per row. All kinds of joinswith other tables to indicate which SP and which column thevalue belongs to...3- 1 individual table per stored procedure, this way the numberof columns in the table would match exactly the number of inputparameters.Obviously the above 3 categories could apply both for the inputand output data.Now I'm still in research mode and I haven't decided on any choiceyet. And I know each approach has serious consequences; let's justsay they are all with some limitations.Has anyone dealt with this scenario before? This is the first time Ineed a table to hold various types of returned data.Just to give some numbers: possibly a few thousand SPs and verylikely each SP would have more than one test scenario.What would you suggest?Thank you
View 2 Replies
View Related
Apr 14, 2008
Is it possible to merge cells within several columns depending on the row number?
e.g.
colA colB colC colD
1 x a b c
2 y -------------------------
3 z -------------------------
for row # 2, #3, colB colC colD are merged.
View 7 Replies
View Related
Aug 5, 2007
Is it possible to combine the following tables:
Table1:
id
1
2
3
Table2:
licenses
3
2
1
To one table, like this:
id licenses
1 3
2 2
3 1
-There is always the same number of rows in both tables.
Thanks a lot!
View 9 Replies
View Related
Apr 9, 2006
I hope I am not asking about something that has been done before, but Ihave searched and cannot find an answer. What I am trying to do is torun a query, and then perform some logic on the rowcount and thenpossibly display the result of the query. I know it can be done withADO, but I need to do it in Query Analyzer. The query looks like this:select Varfrom DBwhere SomeCriteriaif @@Rowcount = 0select 'n/a'else if @@Rowcount = 1select -- this is the part where I need to redisplay the resultfrom the above queryelse if @@Rowcount > 1-- do something elseThe reason that I want to do it without re-running the query is that Iwant to minimize impact on the DB, and the reason that I can't useanother program is that I do not have a develpment environment where Ineed to run the queries. I would select the data into a temp table, butagain, I am concerned about impacting the DB. Any suggestions would begreatly appreciated. I am really hoping there is something as simple as@@resultset, or something to that effect.
View 6 Replies
View Related
Nov 4, 2015
I'm trying to append rows horizontally - I'm using the "xml path" approach
SELECT
E.[USER_NAME] As 'User Name',
(
SELECT ',' + C.[PERMISSION_NAME]
FOR XML PATH('')
) As [Associated Groups]
FROM TABLEA As A
JOIN TABLEB AS B ON A.PK_OBJ_ID = B.FK_APP_OBJECT_REF
JOIN TABLEC AS C ON C.PK_PERMISSION_ID = B.FK_PERMISSION_REF
JOIN TABLED AS D ON D.FK_PERMISSION_REF = C.PK_PERMISSION_ID
JOIN TABLEE AS E ON E.PK_PERSONNEL_ID = D.FK_PERSONNEL_REF
WHERE A.[OBJECT_NAME] = 'MyObjectName'
It's not working. I'm getting:
User nameAssociated Groups
A. SmithG1
A. SmithG2
A. SmithG3
etc...
What I'm looking for is:
User NameAssociated Groups
A. SmithG1, G2, G3
etc...
View 3 Replies
View Related
Mar 26, 2007
Hello,
I have a very wide report that uses a table control. I would like to "freeze" the two leftmost columns so that they remain visible when the user is scrolling horizontally (sideways). Is this possibe?
Thanks,
BCB
View 8 Replies
View Related
Jan 13, 2008
Hi,
I have a client with the following table structure:
ItemNumber, Name, Description
containing the following Data (example):
ItemNumber
Name
Value
6473764
SDRAM
4GB
6473764
Xeon
2300 Mhz
6473764
Video
256 MB
6473764
Bus
1300 Mhz
6473759
SDRAM
2GB
6473759
Xeon
2000 Mhz
6473759
Video
128 MB
6473759
Bus
1066 Mhz
I am trying to use PIVOT to convert this into Columns:
Item Number
SDRAM
Xeon
Video
Bus
6473764
4GB
2300 Mhz
256 MB
1300 Mhz
6473759
2 GB
2000 Mhz
128 MB
1066 Mhz
The problem is that I do not know the names of the columns before I run the query. I retrieve them based on a a list of Item Numbers:
SELECT DISTINCT Name FROM TableName WHERE ItemNumber IN (...)
What I was trying to do is the following, but I am not exactly sure what is wrong:
WITH ProductLines (ItemNumber, ItemName, ItemValue)
AS
(
SELECT ItemNumber, Name, Value FROM ProductItems WHERE ItemNumber IN (...)
)
SELECT * FROM ProductLines -- Don't know the column names
PIVOT
(
... -- Not sure what should come here
FOR ItemNumber IN (...)
)
Thanks a lot,
Aric Levin
View 3 Replies
View Related
Aug 23, 2007
Is it possible in the SSRS Report Designer to rotate a textbox to run vertically, or simply to rotate the text in a textbox ? I have only seen this done within axes lables of charts, but not text boxes.
Thanks in advance,
Kenny
View 1 Replies
View Related
