We have a line graph which plots the actual data points (x,y), everything is working fine with this graph. Now we need to add a trend line to this existing graph after going thro. the articles we came to know that there is no direct option in SSRS to draw a trend line. So we need to calculate the trend values ourselves which we need to plot as atrend line. This trend line is similar to the trend line which comes in Excel chart, do anyone know how to calculate the trend values from the actual data points. We got through several formulas, but were not clear, have anyone tried out exactly the same, if so please help us out by providing an example to calculate the trend values.
I need the Trend line for the following data in Line chart they are the following data. The following are the graph are my output and i need the trend line for these Key_gap value.
This is the link [URL] ....
I need the same trend line for the Bar-Chart in SSRS 2005.
series group : city (DimGeography.City) filtered by (DimGeography.StateProvinceName = "London")
I am getting different lines for different cities of London. That's working fine. But the requirement is i need to display one more line in the same line chart depicting/showing the sales for the "London" state as well.
I have this issues with empty points in a Line Chart. How to make it work with dynamic values in the series and some dates in the category, how to join the "data" values for a "series"where there are no category value. So far I cannot see any fix that would make it work by joining the data points with the "average" data on a empty point (no category value) and with the same color on the line.
What is the best optimised options to display the date labels with bi-weekly intervals starting date Date from one month to three months future from the current date?
As per above requirements, I have built the below line graph query and graph, currently it only displays the date labels as per data but I need to display date labels with bi-weekly intervals starting date from one month to three months future from the current date. Also another issue found, if there are few more date labels then does not show all labels on horizontal axis.
Select /* Set Week End date as Sunday */ DATEADD(DAY, 7 - DATEPART(WEEKDAY, t.TaskBaseline0FinishDate), CAST(t.TaskBaseline0FinishDate +1 AS DATE)) as[WeekEnd] ,count(t.TaskBaseline0FinishDate) as Baseline ,count(t.TaskFinishDate) as Finish
I need to create a chart with the following features
1) Bar chart that has data for 3 years (3 series) 2) Line chart that has the same data as per the above points on the bar chart but this is a running total. (3 series) 3) These data points are for the 12 months 4) there should be a secondary axis for the cumulative one
My line chart displays all lines in a single color (the series color). I'd like a single color per item in the series just like the bar chart. Is there a way to change this? Or is the only differentiation the markers?
I have an average that changes based on the date ranges that the user selects, for some reason it always shows up at 0 value even though i tied the value directly to the textbox, ive tried just about every trick i know. Here is what it looks like.
I want the top level AHT the first chart should be 13.66 the second one should be 8.01.
I can enter a hard value but i need it to change based on what the user enters.
Is there anyway that I can have a multi-line chart title? I have even tried placing a text box over the title part of the chart that is multi-line, although this appears to work once the report is deplyed and viewed in a web browser the text box appears below the chart and the chart then has no title.
I create a rdlc file that contains a line chart with 3 lines that will plot in it. I put the proper data field in "series" and everything plots fine, except I get a spurious line that goes from the end of one line to the start of another line (or possibly back to itself, I can't tell). In another line chart I have 3 lines but get 2 spurious lines.
Anyone know how this happens or how I can fix it? The data is ordered and I don't see anything that would cause this..
Two questions both on Line charts: Is it possible to give the marker of a line chart a different colour from that given to the line? Is it possible to make only the line in the line chart invisible? My requirement is to keep only the markers.
So I have created a chart in my report that counts the number of transactions by day. Each day in a month is a series. Now when I view the report, the series line is different color as expected until I hit the 17th, then the color associated with the line repeats. I.e. the 1st and the 17th are the same color line, the 2nd and the 18th are the same color...etc.
Does anyone know how to break the color limitation quandry?
I want to create a line chart showing the bases, split by 6 month periods, on the X axis and a count on the Y. I have tried but am well and trult stuck!
I have a report I'm writing and have got a problem that has stumped me.
The data the report is based in is in this format:
Date Type
1/1/08 A
1/3/08 B
3/1/08 C
3/5/08 B
3/10/08 A
3/12/08 C
3/20/08 A
Management wants a report showing a line chart that summarizes the data by Month and by Type. So, there are 2 series depending on the Type and data values are based on the count of each Type. So, in the example above the x-axis group would be month, the values would be count(Type) and there would be 2 series €“ Series 1. A, B and Series 2. C
I€™ve defined the x-axis to be Month(Fields!DateOccured.Value). However, they want the x-axis to show every month for the entire year not just what is in the database. So, I defined the x-axis to have a scale of 1 to 12 and the major interval is set to 1. This displays 1 through 12 on the x-axis.
The problem is when there is no data (null) for a particular month. Instead of showing 0, the line chart does not plot anything and the line is drawn to the next displayed point. So, for example on the data above the line chart would plot:
January
Series 1 €“ Qty. 2 Series 2 €“ Qty. 0
February
Null
March
Series 1 €“ Qty. 3 Series 2 €“ Qty. 2
The line chart would draw a line from January to March skipping February. I need to display the null values as 0 and not null indicating no occurrences for the month rather than no data present.
I am creating a simple line chart using SSRS 2005. The chart will display date vs. cumulative enrollment. In the line chart I want to display two lines. One line represents expected enrollment data and the other represents actual enrollment data. I would like the expected data line to be a dashed line and the actual line to be a solid line. I have a single dataset that contains data for both lines. I have added a column to the dataset that acts as a flag to indicate whether the data point is expected or actual. I have dropped the enrollment field from my dataset into "Drop data fields here". I have dropped the date field from my dataset into "Drop category fields here". I have dropped the flag field from my dataset into "Drop series fields here".
When I change the style of the series it changes the styles of both lines. How can assign a different line style to each line? Is this even possible with the way I have set up the chart? Is there another way to set up the chart to accomplish what I am trying to do?
Is there a possibility in SSRS to have  One stacked bar of cumulative sum of different ID's and and Line Chart at left hand of the Bar which will show the Progress as soon as the ID turn to Competed status.
I have been trying to do this , however there is huge problem of scaling:
The line should be finished at all the completed ID's SUM which is the lowest stack of the Bar.
However , the bar gets stretched to all of the space.
I have tried to place it into Tab lix, But it doesn't work.
I can't figure out how to get my line chart to break when there isn't a value. For example, I have a trend line over 4 time periods. The 3rd time period is missing a value. Instead of the line ending at the 2nd period and picking up again at the 4th time period, it's connecting the line 2nd to the 4th period. I'd like it to break and for there to be no line appearing in the 3rd period. I bet that's as clear as mud, but let me know if you have any questions.
I have a table in the report. One of the columns is the result of a variable. It is the maximum value of a field that is grouped.I need to chart the maximum values and use a different group for the values.
For example: In the data set is the following information: Furnace # Heat # Frame Avg Window Avg
then the table has the following: Heat # Max Frame Avg Max Window Avg
I need to graph the Max Frame Avg and the Max Window Avg on separate graphs.
Why the lift chart for my mining models evaluation does not have a random guess model line there? As normal, there should be lines like trained models, ideal model, and random guess model? Why is that? What did I miss? Could any experts here shed me any light on that.
Thanks a lot in advance for your advices and help and I am looking forward to hearing from you shortly.
In this, I need to add line charts for the three years specifying the running total. I already have bar charts for the respective years. This is the query that I used to get the dataset.
SELECT [Parent Name], [ID], [Year], [Month], SUM([Value]) AS 'Running Total' FROM Regulus_Data_Backup GROUP BY [Parent Name], [ID], [Year], [Month] order by [Parent Name],[ID], [Year], DATEPART(mm,CAST([Month]+ Convert(varchar(4),[Year]) AS DATETIME))
Then I added a series with a expression that had the chart type as line as shown below.
My Expression was =RunningValue(Fields!Running_Total.Value,SUM,"MonthWiseData")
My 3 parameter was "MonthWiseData" which is my dataset name. Is this correct? I use the same dataset to get the bar charts too. I get a error message now when loading the report saying "the scope parameter must be set to a string constant.
My goal is to get bar values for 3 years for the 12 months and in the same chart get the cumulative numbers for the 3 years for the 12 months. How can I do this?
Hi, for some AP issue, the file I upload must be without the line feed/carriage return in the last line. for example:
original fixed-length file (exported from SSIS) line NO DATA 1 AA123456 50 60 2 BB123456 30 40 3 CC123456 80 90 4 <-- with line feed/carriage return in the last line
The file format that AP request. The file only has 3 records, so it should end in the third line. line NO DATA 1 AA123456 50 60 2 BB123456 30 40 3 CC123456 80 90
Should I use script component to do it ? I am new for VB . Anyone would help me ?
I am developing several charts with column type and sub type as stacked. There is a requirement from the users that they want an option to choose the type of chart.
Is it possible to change chart type dynamically from say Column type to Line type based on user option in front-end?
I have a stacked bar chart which i notice a vertical line char. how can i removed this vertical line? I already modified the properties under smart labels under calloutlineanchor, calloutlinestyle, calloutstyle to None but still getting this vertical lines. another things is the data label as you can see in the the first column the 1.8% should be place under the gray color but its already shown before the orange color.
I hope I'm posting this in the correct forum (forgive me if I'm not) since I'm not sure if this is an issue with inserting an item into a db or the processing of what I get out of it. I wrote a basic commenting system in which someone my post a comment about something written on the site. I wanted to keep it very simple, but I at least want the ability for a user to have newlines in their comment without having to hardcode a <br /> or something like that. Is there a way for me to detect a newline if someone, for example, is going to their next paragraph? Let me know if you need a better explanation. Thanks in advance!
G'day everyoneThat's a space between the ticks.It's all part of a longer script but seeing as the failure occurs online 1if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[config]') and OBJECTPROPERTY(id, N'IsUserTable') =1)drop table [dbo].[config]GOThat's three lines only. Does it matter that they're in Unicode?Any ideas?Kind regards,Bruce M. AxtensSoftware EngineerStrapper Technologies
Any better way to query SQL 2012 to display the code of a stored proc to a single line. I'm trying to write a script to insert the contents of the procs between my devestprod environments. So people can query a single table for any proc that is different between environments. At the moment I am using the syscomments view and the text column but the problem here is if you get a lengthy proc it cuts it up into multiple rows.
I can get around it by converting the text to a varchar(max) and outer joining the query, but as you can see by my code below I have to try and guess what the maximum number of rows I'm going to get back for my largest proc. If someone adds a new one that returns 8 rows I'm going to miss it with this query.
