I have a column of varchar(2000) but when I use it in a select statement I only get the first 255 characters displayed. (all the data is there as I can see different parts using substring) How do I get the complete column to display?
View 2 Replieshi all, I'm after a way to produce a single-lined output of a char/varchar string replicated over 8000 times.
basically I've been given a task to create a stored procedure which can accept any integer to replicate a string X times.
From what I've read the replicate() fn will covert to varchar of max 8000 bytes.
I've thought about creating a UDF to accept the varchar and int and run a loop to keep outputting but 'print' will pass an endline to the buffer which is no good for my loop.
Any help would be great on this. Thanks.
Does anyone know how to query a field in a table where it contains anASCII code >= 128 - without looping through every field for everyrecord in table (using charindex)?Ex of char I would like to find: ü which is char(252)
View 1 Replies View RelatedWhat I want to see is how to show PO's who's due dates  are > three
Select * from mytable
where myorderstatus = 'onorder'
This is my duedate format and what I want is any that past that date over 3 days
2014-08-11 00:00:00.000
Hi
I defined the following table in MSSQL 2000
sql Code:
Original
- sql Code
CREATE TABLE saved_query (
id INT NOT NULL IDENTITY(1,1) PRIMARY KEY,
name VARCHAR(32) NOT NULL,
query_text VARCHAR(2048) NOT NULL
)
CREATE TABLE saved_query ( id INT NOT NULL IDENTITY(1,1) PRIMARY KEY, name VARCHAR(32) NOT NULL, query_text VARCHAR(2048) NOT NULL)
and whenever I insert or update the query_text field, it's always truncated to 255 characters. Why? I clearly specified a larger field size. I also tried defining query_text as a "TEXT" but got the same result.
Thanks for any help
Ken
I had a post a week or so ago with this issue, I found the cause, but cannot figure out how to fix it... The problem is the comparison on the NVarChar(Max) fields when one of them exceeds 4000 chars. If I comment out the following lines of the stored proc, everything works. I tested without using COALESCE and it still does not work. COALESCE(Comments, '') = COALESCE(@o_Comments, '') ANDCOALESCE(SpecialNotes, '') = COALESCE(@o_SpecialNotes, '') ANDCOALESCE(IAppComments, '') = COALESCE(@o_IAppComments, '') ANDCOALESCE(MgmtNotes, '') = COALESCE(@o_MgmtNotes, '') AND set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[pe_updateAppraisal]
-- Add the parameters for the stored procedure here
@OrderId INT,
@FileNumber NVarChar(25),
@OrderDate DateTime,
@ClientID NVarChar(25),
@ClientFileNumber NVarChar(25),
@PropertyTypeID INT,
@EstimatedValue money,
@PurchaseValue money,
@LoanOfficer NVarChar(50),
@ReportID INT,
@ReportFee money,
@FeeBillInd bit,
@FeeCollectInd bit,
@CollectAmt money,
@Borrower NVarChar(50),
@StreetAddrA NVarChar(50),
@StreetAddrB NVarChar(50),
@City NVarChar(50),
@CountyID INT,
@StateID INT,
@Zip NVarChar(50),
@ContactName NVarChar(50),
@PhoneA NVarChar(50),
@PhoneB NVarChar(50),
@PhoneC NVarChar(50),
@ApptDate DateTime,
@ApptTime NVarChar(25),
@AppraiserID INT,
@InspectionDate DateTime,
@DateMailed DateTime,
@TrackingInfo NVarChar(50),
@ReviewedBy INT,
@PreNotesID INT,
@PostNotesID INT,
@StatusID INT,
@Comments NVarChar(MAX),
@SpecialNotes NVarChar(MAX),
@MgmtName NVarChar(50),
@MgmtContactName NVarChar(50),
@MgmtAddress NVarChar(50),
@MgmtPhone NVarChar(50),
@MgmtFax NVarChar(50),
@MgmtFee money,
@CheckNumber NVarChar(25),
@MgmtNotes NVarChar(MAX),
@SentAppraiser DateTime,
@InfoReceived DateTime,
@CheckReceived DateTime,
@CheckMailed DateTime,
@INumFamilies NVarChar(10),
@IStyle NVarChar(15),
@IUnit NVarChar(15),
@IConstruction NVarChar(15),
@IBasement NVarChar(10),
@IBFinished NVarChar(10),
@IGarage NVarChar(10),
@INumCars NVarChar(2),
@IGarageType NVarChar(10),
@IContactHas NVarChar(10),
@IAvailable NVarChar(10),
@IInformedAmt NVarChar(5),
@IRealtorContract NVarChar(10),
@IContractContact NVarChar(50),
@IPermitCO NVarChar(10),
@ICORenewal NVarChar(10),
@IRenewalInt NVarChar(15),
@IAppComments NVarChar(MAX),
@IKitchen1 NVarChar(5),
@IKitchen2 NVarChar(5),
@IKitchen3 NVarChar(5),
@IKitchen4 NVarChar(5),
@IKitchenB NVarChar(5),
@IBedroom1 NVarChar(5),
@IBedroom2 NVarChar(5),
@IBedroom3 NVarChar(5),
@IBedroom4 NVarChar(5),
@IBedroomB NVarChar(5),
@IBathroom1 NVarChar(5),
@IBathroom2 NVarChar(5),
@IBathroom3 NVarChar(5),
@IBathroom4 NVarChar(5),
@IBathroomB NVarChar(5),
@AppraiserPerc NVarChar(6),
@AppraiserFee money,
@o_OrderId INT,
@o_FileNumber NVarChar(25),
@o_OrderDate DateTime,
@o_ClientID NVarChar(25),
@o_ClientFileNumber NVarChar(25),
@o_PropertyTypeID INT,
@o_EstimatedValue money,
@o_PurchaseValue money,
@o_LoanOfficer NVarChar(50),
@o_ReportID INT,
@o_ReportFee money,
@o_FeeBillInd bit,
@o_FeeCollectInd bit,
@o_CollectAmt money,
@o_Borrower NVarChar(50),
@o_StreetAddrA NVarChar(50),
@o_StreetAddrB NVarChar(50),
@o_City NVarChar(50),
@o_CountyID INT,
@o_StateID INT,
@o_Zip NVarChar(50),
@o_ContactName NVarChar(50),
@o_PhoneA NVarChar(50),
@o_PhoneB NVarChar(50),
@o_PhoneC NVarChar(50),
@o_ApptDate DateTime,
@o_ApptTime NVarChar(25),
@o_AppraiserID INT,
@o_InspectionDate DateTime,
@o_DateMailed DateTime,
@o_TrackingInfo NVarChar(50),
@o_ReviewedBy INT,
@o_PreNotesID INT,
@o_PostNotesID INT,
@o_StatusID INT,
@o_Comments NVarChar(MAX),
@o_SpecialNotes NVarChar(MAX),
@o_MgmtName NVarChar(50),
@o_MgmtContactName NVarChar(50),
@o_MgmtAddress NVarChar(50),
@o_MgmtPhone NVarChar(50),
@o_MgmtFax NVarChar(50),
@o_MgmtFee money,
@o_CheckNumber NVarChar(25),
@o_MgmtNotes NVarChar(MAX),
@o_SentAppraiser DateTime,
@o_InfoReceived DateTime,
@o_CheckReceived DateTime,
@o_CheckMailed DateTime,
@o_INumFamilies NVarChar(10),
@o_IStyle NVarChar(15),
@o_IUnit NVarChar(15),
@o_IConstruction NVarChar(15),
@o_IBasement NVarChar(10),
@o_IBFinished NVarChar(10),
@o_IGarage NVarChar(10),
@o_INumCars NVarChar(2),
@o_IGarageType NVarChar(10),
@o_IContactHas NVarChar(10),
@o_IAvailable NVarChar(10),
@o_IInformedAmt NVarChar(5),
@o_IRealtorContract NVarChar(10),
@o_IContractContact NVarChar(50),
@o_IPermitCO NVarChar(10),
@o_ICORenewal NVarChar(10),
@o_IRenewalInt NVarChar(15),
@o_IAppComments NVarChar(MAX),
@o_IKitchen1 NVarChar(5),
@o_IKitchen2 NVarChar(5),
@o_IKitchen3 NVarChar(5),
@o_IKitchen4 NVarChar(5),
@o_IKitchenB NVarChar(5),
@o_IBedroom1 NVarChar(5),
@o_IBedroom2 NVarChar(5),
@o_IBedroom3 NVarChar(5),
@o_IBedroom4 NVarChar(5),
@o_IBedroomB NVarChar(5),
@o_IBathroom1 NVarChar(5),
@o_IBathroom2 NVarChar(5),
@o_IBathroom3 NVarChar(5),
@o_IBathroom4 NVarChar(5),
@o_IBathroomB NVarChar(5),
@o_AppraiserPerc NVarChar(6),
@o_AppraiserFee money
AS
BEGIN
UPDATE Orders
SET FileNumber = @FileNumber,
OrderDate = @OrderDate, ClientID = @ClientID,
ClientFileNumber = @ClientFileNumber, PropertyTypeID = @PropertyTypeID,
EstimatedValue = @EstimatedValue, PurchaseValue = @PurchaseValue,
LoanOfficer = @LoanOfficer, ReportFee = @ReportFee,
FeeBillInd = @FeeBillInd, FeeCollectInd = @FeeCollectInd,
CollectAmt = @CollectAmt, Borrower = @Borrower,
StreetAddrA = @StreetAddrA, StreetAddrB = @StreetAddrB,
City = @City, CountyID = @CountyID, StateID = @StateID, Zip = @Zip,
ContactName = @ContactName, PhoneA = @PhoneA, PhoneB = @PhoneB,
PhoneC = @PhoneC, ApptDate = @ApptDate, ReportID = @ReportID,
ApptTime = @ApptTime, AppraiserID = @AppraiserID,
InspectionDate = @InspectionDate, DateMailed = @DateMailed,
TrackingInfo = @TrackingInfo, ReviewedBy = @ReviewedBy,
StatusID = @StatusID, Comments = @Comments,
SpecialNotes = @SpecialNotes, CheckNumber = @CheckNumber,
MgmtName = @MgmtName, MgmtContactName = @MgmtContactName,
MgmtAddress = @MgmtAddress, MgmtPhone = @MgmtPhone,
MgmtFax = @MgmtFax, MgmtFee = @MgmtFee, MgmtNotes = @MgmtNotes,
CheckMailed = @CheckMailed, CheckReceived = @CheckReceived,
InfoReceived = @InfoReceived, SentAppraiser = @SentAppraiser,
PreNotesID = @PreNotesID, PostNotesID = @PostNotesID,
INumFamilies = @INumFamilies,
IStyle = @IStyle, IUnit = @IUnit, IConstruction = @IConstruction,
IBasement = @IBasement, IBFinished = @IBFinished,
IGarage = @IGarage, INumCars = @INumCars,
IGarageType = @IGarageType, IContactHas = @IContactHas,
IAvailable = @IAvailable, IInformedAmt = @IInformedAmt,
IRealtorContract = @IRealtorContract, IContractContact = @IContractContact,
IPermitCO = @IPermitCO, ICORenewal = @ICORenewal,
IRenewalInt = @IRenewalInt, IAppComments = @IAppComments,
IBedroomB = @IBedroomB, IBedroom1 = @IBedroom1, IBedroom2 = @IBedroom2,
IBedroom3 = @IBedroom3, IBedroom4 = @IBedroom4, IKitchenB = @IKitchenB,
IKitchen1 = @IKitchen1, IKitchen2 = @IKitchen2, IKitchen3 = @IKitchen3,
IKitchen4 = @IKitchen4, IBathroomB = @IBathroomB, IBathroom1 = @IBathroom1,
IBathroom2 = @IBathroom2, IBathroom3 = @IBathroom4, IBathroom4 = @IBathroom4,
AppraiserPerc = @AppraiserPerc, AppraiserFee = @AppraiserFee
WHERE OrderID = @o_OrderId AND
COALESCE(FileNumber, '') = COALESCE(@o_FileNumber, '') AND
COALESCE(OrderDate, 01/01/1900) = COALESCE(@o_OrderDate, 01/01/1900) AND
COALESCE(ClientID, 0) = COALESCE(@o_ClientID, 0) AND
COALESCE(ClientFileNumber, '') = COALESCE(@o_ClientFileNumber, '') AND
COALESCE(PropertyTypeID, 0) = COALESCE(@o_PropertyTypeID, 0) AND
COALESCE(EstimatedValue, 0) = COALESCE(@o_EstimatedValue, 0) AND
COALESCE(PurchaseValue, 0) = COALESCE(@o_PurchaseValue, 0) AND
COALESCE(LoanOfficer, '') = COALESCE(@o_LoanOfficer, '') AND
COALESCE(ReportID, 0) = COALESCE(@o_ReportID, 0) AND
COALESCE(ReportFee, 0) = COALESCE(@o_ReportFee, 0) AND
COALESCE(FeeBillInd, 0) = COALESCE(@o_FeeBillInd, 0) AND
COALESCE(FeeCollectInd, 0) = COALESCE(@o_FeeCollectInd, 0) AND
COALESCE(CollectAmt, 0) = COALESCE(@o_CollectAmt, 0) AND
COALESCE(Borrower, '') = COALESCE(@o_Borrower, '') AND
COALESCE(StreetAddrA, '') = COALESCE(@o_StreetAddrA, '') AND
COALESCE(StreetAddrB, '') = COALESCE(@o_StreetAddrB, '') AND
COALESCE(City, '') = COALESCE(@o_City, '') AND
COALESCE(CountyID, 0) = COALESCE(@o_CountyID, 0) AND
COALESCE(StateID, 0) = COALESCE(@o_StateID, 0) AND
COALESCE(Zip, '') = COALESCE(@o_Zip, '') AND
COALESCE(ContactName, '') = COALESCE(@o_ContactName, '') AND
COALESCE(PhoneA, '') = COALESCE(@o_PhoneA, '') AND
COALESCE(PhoneB, '') = COALESCE(@o_PhoneB, '') AND
COALESCE(PhoneC, '') = COALESCE(@o_PhoneC, '') AND
COALESCE(ApptDate, 01/01/1900) = COALESCE(@o_ApptDate, 01/01/1900) AND
COALESCE(ApptTime, '') = COALESCE(@o_ApptTime, '') AND
COALESCE(AppraiserID, 0) = COALESCE(@o_AppraiserID, 0) AND
COALESCE(InspectionDate, 01/01/1900) = COALESCE(@o_InspectionDate, 01/01/1900) AND
COALESCE(DateMailed, 01/01/1900) = COALESCE(@o_DateMailed, 01/01/1900) AND
COALESCE(TrackingInfo, '') = COALESCE(@o_TrackingInfo, '') AND
COALESCE(ReviewedBy, 0) = COALESCE(@o_ReviewedBy, 0) AND
COALESCE(PreNotesID , 0) = COALESCE(@o_PreNotesID, 0) AND
COALESCE(PostNotesID, 0) = COALESCE(@o_PostNotesID, 0) AND
COALESCE(StatusID, 0) = COALESCE(@o_StatusID, 0) AND
/*COALESCE(Comments, '') = COALESCE(@o_Comments, '') AND
COALESCE(SpecialNotes, '') = COALESCE(@o_SpecialNotes, '') AND*/
COALESCE(CheckNumber, '') = COALESCE(@o_CheckNumber, '') AND
COALESCE(MgmtName, '') = COALESCE(@o_MgmtName, '') AND
COALESCE(MgmtContactName, '') = COALESCE(@o_MgmtContactName, '') AND
COALESCE(MgmtAddress, '') = COALESCE(@o_MgmtAddress, '') AND
COALESCE(MgmtPhone, '') = COALESCE(@o_MgmtPhone, '') AND
COALESCE(MgmtFax, '') = COALESCE(@o_MgmtFax, '') AND
COALESCE(MgmtFee, '') = COALESCE(@o_MgmtFee, '') AND
/*COALESCE(MgmtNotes, '') = COALESCE(@o_MgmtNotes, '') AND*/
COALESCE(SentAppraiser, 01/01/1900) = COALESCE(@o_SentAppraiser, 01/01/1900) AND
COALESCE(InfoReceived, 01/01/1900) = COALESCE(@o_InfoReceived, 01/01/1900) AND
COALESCE(CheckReceived, 01/01/1900) = COALESCE(@o_CheckReceived, 01/01/1900) AND
COALESCE(CheckMailed, 01/01/1900) = COALESCE(@o_CheckMailed, 01/01/1900) AND
COALESCE(INumFamilies, '') = COALESCE(@o_INumFamilies, '') AND
COALESCE(IStyle, '') = COALESCE(@o_IStyle, '') AND
COALESCE(IUnit, '') = COALESCE(@o_IUnit, '') AND
COALESCE(IConstruction, '') = COALESCE(@o_IConstruction, '') AND
COALESCE(IBasement, '') = COALESCE(@o_IBasement, '') AND
COALESCE(IBFinished, '') = COALESCE(@o_IBFinished, '') AND
COALESCE(IGarage, '') = COALESCE(@o_IGarage, '') AND
COALESCE(INumCars, '') = COALESCE(@o_INumCars, '') AND
COALESCE(IGarageType, '') = COALESCE(@o_IGarageType, '') AND
COALESCE(IContactHas, '') = COALESCE(@o_IContactHas, '') AND
COALESCE(IAvailable, '') = COALESCE(@o_IAvailable, '') AND
COALESCE(IInformedAmt, '') = COALESCE(@o_IInformedAmt, '') AND
COALESCE(IRealtorContract, '') = COALESCE(@o_IRealtorContract, '') AND
COALESCE(IContractContact, '') = COALESCE(@o_IContractContact, '') AND
COALESCE(IPermitCO, '') = COALESCE(@o_IPermitCO, '') AND
COALESCE(ICORenewal, '') = COALESCE(@o_ICORenewal, '') AND
COALESCE(IRenewalInt, '') = COALESCE(@o_IRenewalInt, '') AND
/*COALESCE(IAppComments, '') = COALESCE(@o_IAppComments, '') AND*/
COALESCE(IKitchen1, '') = COALESCE(@o_IKitchen1, '') AND
COALESCE(IKitchen2, '') = COALESCE(@o_IKitchen2, '') AND
COALESCE(IKitchen3, '') = COALESCE(@o_IKitchen3, '') AND
COALESCE(IKitchen4, '') = COALESCE(@o_IKitchen4, '') AND
COALESCE(IKitchenB, '') = COALESCE(@o_IKitchenB, '') AND
COALESCE(IBedroom1, '') = COALESCE(@o_IBedroom1, '') AND
COALESCE(IBedroom2, '') = COALESCE(@o_IBedroom2, '') AND
COALESCE(IBedroom3, '') = COALESCE(@o_IBedroom3, '') AND
COALESCE(IBedroom4, '') = COALESCE(@o_IBedroom4, '') AND
COALESCE(IBedroomB, '') = COALESCE(@o_IBedroomB, '') AND
COALESCE(IBathroom1, '') = COALESCE(@o_IBathroom1, '') AND
COALESCE(IBathroom2, '') = COALESCE(@o_IBathroom2, '') AND
COALESCE(IBathroom3, '') = COALESCE(@o_IBathroom3, '') AND
COALESCE(IBathroom4, '') = COALESCE(@o_IBathroom4, '') AND
COALESCE(IBathroomB, '') = COALESCE(@o_IBathroomB, '') AND
COALESCE(AppraiserPerc, 0) = COALESCE(@o_AppraiserPerc, 0) AND
COALESCE(AppraiserFee, 0) = COALESCE(@o_AppraiserFee, 0)
END
I'm running SQL Server 2K (sp3a) and when I run the following query (inquery analyzer):SELECT id, LEN(ForeignWord) as Length, ForeignWordFROM WordsWHERE Language ='Thai' and LEN(ForeignWord) > 300ORDER BY Length descI receive the following results:id Length ForeignWord------- ----------- -----------34756 445 เ#...truncated at 25534839 412 เ$...truncated at 25537613 350 โ#...truncated at 25537808 315 โ#...truncated at 25538140 315 โ#...truncated at 255(The ForeignWord field is defined as varchar(1000))Note that even though the server says that the lengths are in excess of255 characters, the results are all truncated at 255 characters.I read that SQL Server 6.5 and 7.0 had some issues related to nativeaccess versus OleDb or ODBC, but this is Server 2K patched with thelatest updates.Any idea why my varchar fields are being truncated?-- RickHere is my table definition:CREATE TABLE [Words] ([ID] [bigint] IDENTITY (1, 1) NOT NULL ,[Language] [varchar] (50) NOT NULL ,[Module] [int] NOT NULL ,[Lesson] [int] NOT NULL ,[EnglishWord] [varchar] (1000) NOT NULL ,[ForeignWord] [varchar] (1000) NOT NULL ,[Note] [varchar] (2000) NULL ,[Military] [tinyint] NOT NULL CONSTRAINT [DF_Table1_Military]DEFAULT (0),[Supplemental] [tinyint] NOT NULL CONSTRAINT [DF_Table1_Supplemental] DEFAULT (0),[SoundFileName] [varchar] (1000) NULL)
View 4 Replies View RelatedHi:
Am trying to write sql2005 data to Excel. I have problems when data length exceeds 255 chars. I used a sample destination file with cells containing >255 chars where required, so that the Excel Destination external column was recognized as DT_Text.
My oledb source columns(external and output) are both varchar (1000).
Works fine , but fails when values>255 chars.
Error 0xC0202009 on ProcessInput.
I use SQL2005 enterprise SP2.
I tried changing the Oledb source output to Textstream, but that does not work at all.
How do I export values >255 chars to excel?
TIA
Kar
Hi,
I have created a report in SQL reporting using serveral parameters including a date parameters called
StartDate EndDate
Now my requirement is, in ReportViewer I need to validate in such a way where
"StartDate" should not be greater than "EndDate".
So kindly help me out by giving me possible solution for the above issue.
thanks in advance,
Ramesh KS
Good morning.
Is there anyway to change the way that SSMS displays a bit field? Currently it displays it as True or False, but I much prefer 1 or 0, the way EM and QA displayed it.
Thank you,
Kelly
I would like for each of the queries to have all of the selected fields shown horizontally in one table.
For example,
Commercial Created | Commercial Closed | Commercial UserId | Residential Created | Residential Closed | Residential UserId | Other Created | Other Closed | Other UserId.
Here is what I have now and it is displaying the fields as I would like them to. In the code below, each Views is acting as an individual table and then joined together to make another table when the query is executed.
WITH t1 AS (
SELECT vSalesReportProcessDetail.[RequestId]
,vSalesReportProcessDetail.Process
,vSalesReportProcessDetail.Entered
,vSalesReportProcessDetail.Closed
/*ROW_NUMBER() over (ORDER BY vSalesReportProcessDetail.[RequestId]) rn*/
FROM[Sales].[dbo].[vSalesReportProcessDetail]
WHERE Process = 'Commercial' ),
[code]....
Hi All.
I apologise if i have not posted this in the correct Topic before i start. But was uncertain where to post this query.
This is my first project in ASP.NET, MS Visual Web Developer 2005 Express and SQL Server 2005 Express. I have relatively little experience, so please bare with me. I have the table below:-
Column Name Data Type
OrderID intOrderNo intInvoiceNo varchar(50)PurchaseDate smalldatetimeCost moneyInsure money
I wish to have a dropdownlist on an aspx page display the OrderNo and the Cost e.g. 12345 £3.50. I have tried the SQL Statement below but that just calculates the addition of both.
SELECT OrderNo + ' ' + Cost AS Expr1
FROM [Order]
Do i have to convert them both to string/varchar first? If so, how?
Thanks for your replies.
ID
Original_Date
Date1
Date2
Lowest_Date
1
12/2/07
14/02/07
18/02/2007
14/02/2007
2
01/03/07
23/3/2007
11/3/2007
11/03/2007
3
15/4/2007
14/05/2007
16/05/2007
14/5/2007
4
6/6/07
8/6/07
9/6/06
8/6/07
I have a select query that looks like this
Select table1.id, table1.original_date,
(select €¦€¦..from €¦..) as Date1,
(select €¦€¦..from€¦..) as Date2
from table1
Date 1 and Date 2 are both complex subqueries that retrieve a date from other tables. I would like another column displaying the oldest date between date1 and date2. Can anyone help?
Say I have a column called 'NAME' in a table called 'CLIENT' and the values in NAME are Surnames or company names like:
NAME
----------------------
1-FOR-ALL
A.B. SMITH (TOOLS LTD)
BROWN
THOMSON
VW CAR SALES
I want my select to return the first 3 characters, excluding special characters (only characters between 1 and z).
In example, the following would be returned for the data above:
NAME
----------------------
1FO
ABS
BRO
THO
VWC
Say I have a column called 'NAME' in a table called 'CLIENT' and the values in NAME are Surnames or company names like:
NAME
----------------------
1-FOR-ALL
A.B. SMITH (TOOLS LTD)
BROWN
THOMSON
VW CAR SALES
I want my select to return the first 3 characters, excluding special characters (only characters between 1 and z).
In example, the following would be returned for the data above:
NAME
----------------------
1FO
ABS
BRO
THO
VWC
Hi All
I have loaded some data to the application using flat files
which has non english chars.
all the columns in the database are NVARCHAR type.
but in db and in application UI, the non english chars are being diplayed as junk chars. ???121
The application supports UTF-8 format
is there any setting at db level to be modified to display the non english char set as is.
Thanks
Hi,
I am very new to using SSIS.
Trying to import data from MS Access 2000.
I receive the error "
[OLE DB Destination [1907]] Warning: Truncation may occur due to inserting data from data flow column "GENDER" with a length of 255 to database column "GENDER" with a length of 2. " on the source flow.
I have done some googling and came up with this post: http://torontosql.dotnetnuke-portal.com/Default.aspx?tabid=32233 which I thought may help, but it does not.
The query against the access datasource features the column: iif([sex]=1, 'm', 'f'). I tried using left(..., 2) as well, but SSIS is determind to treat the field as 255 characters for some reason.
I don't even particualrly care that the field is 255 chars and the sources is only two, I just want the data in! I have other fields coming up with similar error.
Can someone please advise?
PS, what is th significance of the "External Columns" Vs "Output Columns" on the Input and Output Properties tab in Advanced Editor?
I am really struggling with SSIS, it is not as intuitive as DTS.
I have a stored proc. in that proc i need to select a value based on which one is greater.
Here is a non working example
select
name,
if (truck1.age > truck2.age, truck1.age, truck2.age)
from person
left join truck truck1
on truck1.make = person.make
left join truck truck2
on truck2.make = person.make
Thanks in advance for any help with this
I'm trying to sniff or view a fairly large query that get's passed to my sql server.
The problem I'm having is that the dbcc inputbuffer only shows the first 255 chars of query and I need to see the whole thing.
Is there another method or a way to increase the size of this so I can see the whole query?
Thanks
- jeff
Hi Guys
I have a table with id, date column in it. How do i list all records which has date greater than 30 day?
Thanks
Is this Correct?
SELECT * FROM TABLE WHERE DATEDIFF(DAY, DATE, GETDATE()) > 30
I have a table which measures the changes in a feedback rating, measured by an integer. Most of my records are the same. Only the primary key & the timestamp change.
How do I query just the changes?
Example dataset:
idrating
15
25
35
45
56
66
[code]....
There are 20 rows & 5 changes. The query I want will result in just those that are different from the ones before them:
idrating
45
56
97
118
189
I use Microsoft SQL 2008
I was comparing diffrent columns and within those columns there are specific values. I want to get the greter values using SQL 2000
i want something like these but i think there was an error in scripting
CASE
WHEN a > b,c,d,e THEN a
WHEN b > a,c,d,e THEN b
WHEN c > a,b,d,e THEN c
WHEN d > a,b,c,e THEN d
WHEN e > a,b,c,d THEN e
END
Please help. Is there any possible way to implement this? Thank you.
Hello,
I would like to create a job that runs ones a day to delete records in a table that are older than one day. Any ideas?
Thanks,
Nina Melhem
The length of my query string is greater than 255 characters. SQL Server is truncating the query string when I assign it to a Local variable.
What should i do....???
Here is the first part of a query for MySQL that I am trying to get working on MSSQL:
Code:
SELECT n.*,
round((n.rgt-n.lft-1)/2,0) AS childs,
count(*)+(n.lft>1) AS level,
((min(p.rgt)-n.rgt-(n.lft>1))/2) > 0 AS lower,
(( (n.lft-max(p.lft)>1) )) AS upper
FROM table n
...
But, I get this error message:
Server: Msg 170, Level 15, State 1, Line 3
Line 3: Incorrect syntax near '>'.
Is there a way to convert this? Thanks
I created this unique codes and I need all [FRMDAT] field set to "12/31/2014" in the MKLOPT table, where the [JOBCOD] in the VALUE list BELOW have a [FRMDAT] that is currently (greater than) > "12/31/2014"
VALUE LIST
PH00059
PH02775
PH03051
PH03305
PH03336
PH03342
PH03371
PH03992
PH03993
PH03994
im supposed to output the companies that have commission rates highter than company "Industrial Appparatus".
is there some whay to modify this code so that it will work?
commissionrate > ALL(Select commissionRate From salescompanydomestic Where companyName = 'Industrial Appparatus')
I have a query pulling all records with a disconnect date and a transaction date. However, I would like to retrieve any records that have a transaction date greater than 30 days from the disconnect date. I have been unable to figure out the correct formula to use. I think I need to use the datediff function in SQL, but I've never really used this function before.
View 2 Replies View RelatedProblem: I want to set compatibility_level only when it is greater than 110.
Solution: Select the compatibility level and if it is greater than 110, I alter database set compatibility level=110
ISSUE Irrespective of IF Exist statement the alter database statement is executed all the time.
Here is the sql statement
IF EXISTS (
SELECT * FROM sys.databases where compatibility_level >110 AND name='mydatabase'
)
BEGIN
ALTER DATABASE mydatabase SET COMPATIBILITY_LEVEL = 110
END
What is that I am missing here ?
Hello All,
Trying to set up a column in a grouped matrix that displays a count of all record over a specificed number.
The field I am counting are response time of transaction and I want to count how many were over 500 milliseconds. I though it would be something like this...
Code Snippet
=Count(Fields!ResponseTime.Value > "500")
However, this appears to just return the count of all rows and ignores the "500" part.
Am I missing something? If someone could post a alternate code snippet, that would be great.
Thanks in advance,
Clint
I'm using and Execute Sql Task to get a count of the record in the table: How can I make the workflow to stop if it doesn;t meet the count requirement and continue if it does to the next flow. I'm looking at expression...but a bit comfused about using it.
thanks
I have a field name call firstname and other field middleinit, now the table contains data. and i want to extract data, the firstname field sometimes contains the middle initial, for for example JOHH D.
now I would like to set the firstname field with JOHN only and and set the middleinit field like D only
thanks
With this procedure,can't show if GiftTitle contains space ,nonalphabetic chars(&,-,..) and if start with numnber.
How can i modify ??
Plz help me.
Thanks.
CREATE PROCEDURE dbo.trymatrix AS
DECLARE @SQLCommand varchar(4096), @column sysname
SET @SQLCommand = 'select c.CustomerID as Cust_ID,Name as Co_Name, ' + char(13)
DECLARE curGift CURSOR STATIC LOCAL FOR
select distinct GiftTitle from Redemption1
OPEN curGift
WHILE 1 = 1
BEGIN
FETCH curGift INTO @column
IF @@FETCH_STATUS <> 0
BREAK
SET @SQLCommand = @SQLCommand +
'sum(case GiftTitle when ''' +@column +''' then 1 else null end) as '+ @column + ','+char(13)
END
DEALLOCATE curGift
SET @SQLCommand = left (@SQLcommand, len(@SQLcommand)-2) + char(13)
SET @SQLCommand = @SQLCommand +
'from Customer c
inner join Redemption1 d
on c.CustomerID=d.CustomerID
group by Name,c.CustomerID
order by c.CustomerID'
PRINT @SQLCommand
EXEC (@SQLCommand)