I have a flat text file. All the columns are set to redirect on error. But, when I set it to row, it gives the error column, ErrColumn. Is there a way to display the real column name-the column which has the error.
Thanks.
hi,
i have the following scenario,
100 tables in the database,i have to display the table names if the column name given by the user is repeated in the different tables...
e.g.: Let us say,the column name ID IS REPEATED in the 70 tables out of 1000 tables.Then i have to display all the 70 table names..
how to write sql query for it?
i am greateful if any one help me in solving this scenario..
Hi Everybody
I am working with SQL Server2000. I have one table named Table1 is described as below
Column1
----------------------------
Val1
Val2
Val3
Val4
Val5
Val6
Val7
Val8
Now I want result like that
Column1 Column2
-------------------------------------
Val1 Val2
Val3 Val4
Val5 Val6
Val7 Val8
How I acheive this result from a Query ?
Ihave 2 tables...they are basically the same except for the column name in one of them because they deal with 2 different names, though..the data i want is in columns that have the same name.pretty much what i want to do...is .they also need to be distinct so i dont count duplicates...i can get them as separate tables...but i cant get them together..I need them in 1 column because of how it is sent to the C3 code page and how it reads it...the structure has already been previously set..and there are about 5 other statments that are being executed in this one stored procedure like this (also i wasnt the one who set this up).
image 1 is what is currently set up
imgur: the simple image sharer
top part is what is stored in tables..bottom is more of the result
it basically runs this code to get the bottom
DECLARE @id INT;
DECLARE @invest nvarchar(50);
SET @id = '7633';
SET @invest = '';
SELECT 'a' + CONVERT(nvarchar, orderfindings.risk_rating) AS cat, COUNT(DISTINCT orderfindings.prnt_id) AS stat
FROM orderheader, orderaudits, orderfindings
WHERE orderheader.id = orderaudits.orderheader_id AND orderaudits.ID = orderfindings.prnt_id
AND orderheader.id = @id AND orderfindings.risk_rating > 0 AND orderaudits.Investor_Name LIKE '%' + @invest + '%'
GROUP BY orderfindings.risk_rating
If i want agencies instead of findings..just replace it..agencies and findings are the 2 tables..they are the pretty much identical column wise...but i want the result together..i've tried several ways..but i cant seem to get it.
image 2 - the table at the bottom is more what i'm looking for..it combines them both into 1
imgur: the simple image sharer
if an order has a finding or agency or both in it..then it gets marked as a 1 for that risk rating...if it doesnt..then 0 for that risk rating..and then sum them all up to see what i got..
I've been working with it...did this [SQL] compare2 - Pastebin.com ..got it to display 2 columns..but still not the right result...i'm getting a1 = 1...a2 = 1...so its not running through all the orders...or it needs a way to count it...i put a sum at beginning of case statement..erro because of counts...so i took counts out...
I'm using SQL Server 2000 sp2...I have created a view that gives me customer info from which I need to create a view and or table that gives me a 24 monthly columns of the sum of each account_number monthly revenues (going back 24 months from this month)..The columns I'm pulling from are these:
Customer_Name
Account_number
First_insert_date
Order_net_price
Here's what I have so far:
----------------------------
SELECT TOP 100 PERCENT Account_number, Customer_Name, SUM(Order_net_price) AS 'CM - 24'
FROM dbo.Customer_Feed
WHERE (First_insert_date >= DATEADD(mm, DATEDIFF(mm, 0, GETDATE()) - 24, 0)) AND (First_insert_date < DATEADD(mm, DATEDIFF(mm, 0, GETDATE()) - 23,
0))
GROUP BY Account_number, Customer_Name
ORDER BY Account_number
I've basically hacked out a way to get the monthly totals for each account. What I would like to do is so be able to repeat the query but increment the date range 1 month until reaching the present or last FULL month and display these sums in individual columns named CM - n (where CM means current month and 'n' is the # of months back from current.how to make this query run over again the 23 other times I need it to and display those months sum totals in individual columns.
My matrix column labels do not appear at all at the lowest level column grouping when viewing in IE7
All is ok when viewing the pdf, or when viewing using the preview tab.
Is this an ie7 bug?
Hi all,
View 5 Replies View RelatedHere's a tricky SQL question that has definitely driven me to the end ofmy rope. I'm using Oracle 9i and I need to perform some simplemultiplication on a field and then display it with a percent sign usingthe COLUMN command. Here's the code thus far:COLUMN price format 9,999.99 HEADING 'Charged%'SELECT pricecharged * .231 as priceFROM VT_examdetailThe output from this reads:Charged%---------23.1034.6534.65....The kicker here is that I need to add a percent sign to the right of theoutput, so that it reads:Charged%---------23.10%34.65%34.65%....I thought I could do this by just adding "|| ('%')" into the SELECTstatement, but when I do this the decimal position defined in the COLUMNcommand is lost. Does anyone know another way around this?Thanks,Alex
View 3 Replies View RelatedHi, I'm trying to accomplish something with this code:
SELECT ProductionOrder.PO, ProductionOrder.Part, Single.Length,
Single.Date, Pairs.Length, Pairs.Date FROM [ProductionOrder]
LEFT OUTER JOIN Pairs ON Pairs.PO = [ProductionOrder].PO AND
Pairs.Part = [ProductionOrder].Part
LEFT OUTER JOIN Single ON Single.PO = [ProductionOrder].PO AND
Single.Part = [ProductionOrder].Part
WHERE (Single.Broke='True' AND (Single.[BrokeFixed] = 'False' OR Single.[BrokeFixed] IS NULL))
OR (Pairs.Broke='True' AND (Pairs.[BrokeFixed] = 'False' OR Pairs.[BrokeFixed] IS NULL))
With this I get the following result:
PO | Part | Length | Date | Length | Date
-------------------------------------------------------------------------------------------------------------------------------------------------
602520 | 3 | 24000 | 2007-08-24 15:33:33.727 | NULL | NULL
602521 | 3 | NULL | NULL | 14550 | 2007-08-29 17:41:01.930
But what I want is:
PO | Part | Length | Date
------------------------------------------------------------------------------------
602520 | 3 | 24000 | 2007-08-24 15:33:33.727
602521 | 3 | 14550 | 2007-08-29 17:41:01.930
How can I accomplish this? Please, any help would be very much appreciated.
Thanks a lot in advance
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:intranetnewConnectionString %>"
InsertCommand="INSERT INTO timeoffcalc(Typeoftime, amountoftime, employeeID) VALUES (@TypeofTime, @Amountoftime, @emplID)"
I have the emplyID and Typeof time as a PK. When the user enters a duplicate value it just gives them the error page. Can i set a label or something to notify the user of the error instead of the error page?
note: according to the product documentation parameterized queries should preview just fine.
reference: http://msdn2.microsoft.com/en-us/library/ms139904.aspx
i have an OLE DB Source
Data access mode: SQL command
i began with a simple query, and it previews just fine
i have an existing user variable in my package. its being referenced successfully by an intial "execute sql task" i have.
i then replace the where conditions with parameters.
i click on "parameters..." and map the parameters to my variables.
i click preview and an error appears.
the error message is...
There was an error displaying the preview
Additional information:
no value given for one or more required parameters. (Microsoft SQL Native Client)
any ideas or suggestions?
Hello all
please see this query
select * from Table1 where Table1ID in
(select Table1ID from Table3)
Step1 )select Table1ID from Table3
output->Giving error as Table1ID is not valid column in Table3 .
Step2)select * from Table1 where Table1ID in
(select Table1ID from Table3)
Output-> Giving all records of Table1 as i am expecting error from this query .
Please check with your demo database and reply.
Thanking you.
Ramana.
Hello,
I have a seach on UserID enetred in a textbox by user.
When the user types a userID which has no data in the database can I display an error msg instead of the chart and table that is displayed on entering a valid userID.
Thanks,
Kiran.
Our Visual Studio installation suddenly starting producing the error below upon trying to open any .dtsx package; although by "suddenly" I'm sure it was due to some Windows update or other program install, update, or uninstall. I've spent two days uninstalling, reinstalling, and repairing everything that is seemingly related to VS, but no luck. I've searched the forums and could not find this specific error mentioned, although I have tried some of the suggestions to fix possibly related 'class not registered' errors, but again no luck.
===================================
There was an error displaying the layout. (Microsoft Visual Studio)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=DDSErrorDeserializeDiagram&LinkId=20476
===================================
Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)) (msddsp)
------------------------------
Program Location:
at MSDDS.IDdsDiagram.CreateShape(String ProgID, Boolean Visible, Int32 X, Int32 Y)
at Microsoft.DataWarehouse.Controls.Interop.AxMSDDS.CreateShape(String progID, Boolean visible, Int32 x, Int32 y)
at Microsoft.DataWarehouse.Design.ComponentDiagram.OnCreateShape(Object logicalObject, Int32 x, Int32 y, Boolean visible)
at Microsoft.DataTransformationServices.Design.DtsComponentDiagram.OnCreateShape(Object component, Int32 x, Int32 y, Boolean visible)
at Microsoft.DataWarehouse.Design.ComponentDiagram.CreateShape(Object logicalObject, Int32 x, Int32 y)
at Microsoft.DataTransformationServices.Design.DtrControlFlowDiagram.CreateExecutableShape(DtsContainer dtsContainer, Int32 x, Int32 y, Int32 width, Int32 height)
at Microsoft.DataTransformationServices.Design.DtrControlFlowDiagram.RefreshSequenceExecutables(IDTSSequence sequence)
at Microsoft.DataTransformationServices.Design.DtrControlFlowDiagram.AfterDeserialize()
Any help would be greatly appreciated.
TIA,
Scott
Hi all,
We are displaying an SQL Server 2005 Reporting Services report in our ASP.NET 1.1 application by accessing the report through URL and embedding the same in an iframe HTML web control. The user can export the report contents into CSV format by making use of the export functionality provided by Reporting Services.
Now we have been asked to display a warning mesage to the user when the no. of records in the report exceeds 1 million i.e. if the no. of records in the report exceeds 1 million and the user tries to export the report to CSV format by clicking on the "Exprot" link button, we need to display a warning message to the user.
My doubt is whether this can be done in Reporting Services. Are there any programmatic interfaces exposed by Reporting Services which might help us implement this requirement ?
Thanks,
CodeKracker.
Does anyone know of a way to capture in C# SQL PRINT ERROR MESSAGES generated from stored procedures? Any help would be greatly appreciated.
If divisor is "0" I need to print the Field, but for me it displaying #Error. If I pass any value it is working fine. It is not working only for the Field.
RULE: Fields!B.Value=0, PRINT Fields!A.Value.(IIf(B=0,A,A/B))
Working: IIF(Fields!B.Value=0,0,Fields!A.Value/IIF(Fields!B.Value=0,0,Fields!B.Value))
Not working: IIF(Fields!B.Value=0,Fields!A.Value,Fields!A.Value/IIF(Fields!B.Value=0,Fields!A.Value,Fields!B.Value))
A B Cal(A/B)
E 1 0 1
F 4 2 2
G 9 3 3
I am having 3 columns like A,B,C. In the C column I am having calculations like
=CInt(IIf(B=0,100,((A-B)/B)*100))
After this calculation if the column B is 0(zero) corresponding C column get display as "#Error", if B is not having 0 every thing is working fine.
In the calculation if I remove the " /B" it is working fine. So, how to display the value 100 in C if B=0.
ALTER procedure [dbo].[MyPro](@StartRowIndex int,@MaximumRows int)
As
Begin
Declare @Sel Nvarchar(2000)set @Sel=N'Select *,Row_number() over(order by myId) as ROWNUM from MyFirstTable Where ROWNUM
Between ' + convert(nvarchar(15),@StartRowIndex) + ' and ('+ convert(nvarchar(15),@StartRowIndex) + '+' + convert(nvarchar(15),@MaximumRows) + ')-1'
print @Sel
Exec Sp_executesql @Sel
End
--Execute Mypro 1,4 --->>Here I Executed
Error
Select *,Row_number() over(order by myId) as ROWNUM from MyFirstTable Where ROWNUM
Between 1 and (1+4)-1
Msg 207, Level 16, State 1, Line 1
Invalid column name 'ROWNUM'.
Msg 207, Level 16, State 1, Line 1
Invalid column name 'ROWNUM
Procedure successfully created but giving error while Excuting'.
Please anybody give reply
Thanks
I have a table in which a non-primary key column has a unique index on it.
If I am inserting a record into this table with a duplicate column value for the indexed column, then what will be the error number of the error in above scenario? OR How could I find this out?
I am getting an error importing a csv file both using SSIS and SSMS. The csv is comma delimited with quotes for text qualifiers. The file gets partially loaded and then gives me an error stating The column delimiter for column "MyColumn" was not found. In SSIS it gives me the data row which is apparently causing the problem but when I look at the file in a text editor at the specific row identified the file has the comma delimiter and it looks fine. I am using SQL Server 2008.
View 9 Replies View Related
Hi everyone,
I am using SSIS, and I got the folowing error, I am loading several CSV files in a OLE DB, Becasuse the file is finishing and the tak dont realize of the anormal termination, making an overflow.
So basically what i want is to control the anormal ending of the csv file.
please can anyone help me ???
I am getting the following error after replacing the '""' with '|'.
The replacng is done becasue some text sting contains "" wherein the DFT was throwing an error as " The column delimiter could not foun".
[Flat File Source [8885]] Error: The column data for column "CountryId" overflowed the disk I/O buffer.
[Flat File Source [8885]] Error: An error occurred while skipping data rows.
[DTS.Pipeline] Error: The PrimeOutput method on component "Flat File Source" (8885) returned error code 0xC0202091. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
[DTS.Pipeline] Error: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0047039.
[DTS.Pipeline] Information: Post Execute phase is beginning.
apprecite for immediate response.
Thanks in advance,
Anand
Hello,I am trying to follow along with the Data Access tutorial under the the "Learn->Videos" section of this website, however I am running into an error when I try to use the "Edit -> Update" function of the Details View form: I'll post the error below. Any clues on how to fix this? Thanks in advance!!! ~DerrickColumn name 'Assigned_To' appears more than once in the result column list. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Column name 'Assigned_To' appears more than once in the result column list.Source Error: Line 1444: }
Line 1445: try {
Line 1446: int returnValue = this.Adapter.UpdateCommand.ExecuteNonQuery();
Line 1447: return returnValue;
Line 1448: }
I used to do this with classic asp but I'm not sure how to do it with .net.Basically I would take a table of Categories, Then I would loop through those. Within each loop I would call another stored procedure to get each item in that Category. I'll try to explain, Lets say category 2 has a player Reggie Bush and a player Drew Brees, and category 5 has Michael Vick, but the other categories have no items.Just for an example.. Category Table: ID Category1 Saints2 Falcons3 Bucaneers4 Chargers5 FalconsPlayer Table:ID CategoryID Player News Player Last Updated1 1 Reggie Bush Poetry in motion 9/21/20062 1 Drew Brees What shoulder injury? 9/18/20063 5 Michael Vick Break a leg, seriously. 9/20/2006 Basically I would need to display on a page:SaintsReggie BushPoetry in MotionFalconsMichael VickBreak a leg, seriously.So that the Drew Brees update doesnt display, only the Reggie Bush one, which is the latest.I have my stored procedures put together to do this. I just don't know how to loop through and display it on a page. Right now I have two datareaders in the code behind but ideally something like this, I would think the code would go on the page itself, around the html.
View 1 Replies View RelatedI have a SSIS package that reads data from a dump table, runs a custom script that takes date data and converts it to the correct format or nulls and formats amt fields to currency, then inserts it to a new table. The new table redirects insert errors. This process worked fine until about 3 weeks ago. I am processing just under 6 million rows, with 460,000 or so insert errors that did give error column and code.
Now, I am getting 1.5 million errors. and nothing has changed, to my knowledge. I receive the following information.
Error Code -1071607685 Error Column 0 Error Desc No status is available.
The only thing I can find for the above error code is
DTS_E_OLEDBDESTINATIONADAPTERSTATIC_UNAVAILABLE
To add to the confusion, I can not see any errors in the data written to the error table. It appears that after a certain point is reached in the processing, everything, or most records, error out.
Any help is appreciated.
Thanks
Derrick
Hi, all
I'm getting this error at runtime when my page tries to populate a datagrid. Here's the relevant code.
First, the user selects his choice from a dropdownlist, populated with a sqldatasource control on the aspx side:<asp:SqlDataSource ID="sqlDataSourceCompany" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT [PayrollCompanyID], [DisplayName] FROM [rsrc_PayrollCompany] ORDER BY [DisplayName]">
</asp:SqlDataSource>
And the dropdown list's code:<asp:DropDownList ID="ddlPayrollCompany" runat="server" AutoPostBack="True" DataSourceID="sqlDataSourcePayrollCompany"
DataTextField="DisplayName" DataValueField="PayrollCompanyID">
</asp:DropDownList>
Then, I use the selectedindexchanged event to bind the data to the datagrid. Here's that code:
1 Sub BindData()
2
3 Dim ds As New DataSet
4 Dim sda As SqlClient.SqlDataAdapter
5 Dim strSQL As String
6 Dim strCon As String
7
8 strSQL = "SELECT [SocialSecurityNumber], [Prefix], [FirstName], [LastName], [HireDate], [PayrollCostPercent], " & _
9 "[Phone], [BadgeNumber], [IsSupervisor], [SupervisorID], [IsUser], [IsScout] FROM [rsrc_Personnel] " & _
10 "WHERE ([PayrollCompanyID] = @PayrollCompanyID)"
11
12 strCon = "Data Source=DATASOURCE;Initial Catalog=DATABASE;User ID=USERID;Password=PASSWORD"
13
14 sda = New SqlClient.SqlDataAdapter(strSQL, strCon)
15
16 sda.SelectCommand.Parameters.Add(New SqlClient.SqlParameter("@PayrollCompanyID", Me.ddlPayrollCompany.SelectedItem.ToString()))
17
18 sda.Fill(ds, "rsrc_Personnel")
19
20 dgPersonnel.DataSource = ds.Tables("rsrc_Personnel")
21 dgPersonnel.DataBind()
22
23 End Sub
24
I'm assuming my problem lies in line 16 of the above code. I've tried SelectedItemIndex, SelectedItemValue too and get errors for those, as well.
What am I missing?
Thanks for anyone's help!
Cappela07
Hi,
I am trying to create a inline function which is listed below.
USE [Northwind]
SET ANSI_NULLS ON
GO
CREATE FUNCTION newIdentity()
RETURNS TABLE
AS
RETURN
(SELECT ident_current('orders'))
GO
while executing this function in sql server 2005 my get this error
CREATE FUNCTION failed because a column name is not specified for column 1.
Pleae help me to fix this error
thanks
Purnima
Good Morning,
Am I new at this so please bear with me. I searched the site and found threads on identifying the meaning of an error code and have instituted that scripting. It is telling me that I have a 'The data value cannot be converted for reasons other than sign mismatch or data overflow.' error. It identifies the colum as 5301.
I searched the threads and found one telling me I could do an advanced editor search on the lineage id to find the column being referenced. I have traced the entire process using this information and cannot find a reference lineage id of 5301. Was that thread information accurate, and if so what do I do now? If not, can someone tell me how the heck I find column 5301? I cannot load my table from a flat file because of this.
Work so far:
I have checked for integrity between column definitions and source flat file. I applied derived column changes to make the data transform to the appropriate data type/order where necessary. This part works without error. (Or seems to, there is no error output from this piece.) It is only on the final attempt to load that the process errors with these messages.
Thank you in advance to anyone who can help me.
Rog
Hello,
I have the following select:
SELECT DDV_DOCENCIA_SERVIDOR.cpf_ddv_servidor,
ape_serie.nome as nome_serie,
(select sum (carga_horaria) from (select case
when APE_COMPOSICAO_ENSINO.codigo IN (143,203,208,443,503,508) THEN (APE_QD_CURRICULAR_disciplina.carga_horaria / 20)
when APE_COMPOSICAO_ENSINO.codigo IN (141, 199) then (APE_QD_CURRICULAR_disciplina.carga_horaria / 40)
else 30
end ) as carga_horaria )
FROM DDV_DOCENCIA_SERVIDOR
INNER JOIN... (and there it goes..)
The problem is in the part where I do the sum... it returns me the following error:
"No column was specified for column 1 of 'carga_horaria'."
It seems to be complaining about somewhere where I should have given a name to something... but I just couldn't figure where.
I also plan to do I group by "nome_serie" at the end of it, but I must resolve this problem first.
I am trying to delete a duplicate row in a table and get the following message:
"Key column information is insufficient or incorrect"
"Too many rows were affected by update"
The table does not have any indexes or keys defined.
How can I delete the row?
Thanks,
Ken Nicholson
Hi,
I'm converting the SQL statements from Oracle to MS SQL Server in the Java program.I'm getting the following error :
java.sql.SQLException: No such column count(*)
at the LAST STATEMENT of the following piece of code -
strQuery = "Select count(*) from PS_FISC_PNLG_LIST";
rset = m_databaseConnector.execQuery(strQuery);
if(rset.next())
nCnt = Integer.parseInt(rset.getString("count(*)"));
Whats the correct substitute for this stmt in SQL Server? Please help.
Hi,
There is an error output from one oledb destination which causes error to another which populated a table called tblFailedRows.
I have mapped the errorcolumn to the errorcolumn in tblFailedRows.
When looking at the errorcolumn in tblFailedRows I see just numbers not the column name.
How do I get the column name that causes the error?
Thanks
Hi,
Using SSIS, while importing (source i.e. .csv into destination i.e. sql server table), how is it possible to log the source COLUMN which causes the error in the row?
Thanks