Distinct Count Fall Under Unique ID
Feb 19, 2014
Aim- Need to count how many [FDMSAccountNo] fall under a unique parentid
This is my query
SELECT [FDMSAccountNo]
,ParentID
FROM [FDMS].[dbo].[Dim_Outlet]
where ParentID = '878028271889'
Which produces the following, The number of fdmsaccountno under parentid is two. Its two because one of the fdmsaccountno is = to parentid
FDMSAccountNo ParentID
878028271889878028271889
878028272887878028271889
878028273885878028271889
Desired result
Parentid #_of_outlets
878028271889 2
View 5 Replies
ADVERTISEMENT
Aug 2, 2013
I have a table of orders. I was asked to count the orders that fall into specific dollar buckets. Normally I would use a CASE statement for this, but in this case, there are over 100 different buckets!
For example, I need to count the orders in $5 increments up to $400. The CASE statement would look like this:
Code:
CASE
WHEN sum(revenue) BETWEEN 0.01 AND 5.00 THEN [0.01 to 5.00]
WHEN sum(revenue) BETWEEN 5.01 AND 10.00 THEN [5.01 to 10.00]
...
WHEN sum(revenue) BETWEEN 395.01 AND 400.00 THEN [395.01 to 400.00]
Is there an easier way to do this, maybe with a loop?
View 11 Replies
View Related
Jul 3, 2013
I am trying to get count on a varchar field, but it is not giving me distinct count. How can I do that? This is what I have....
Select Distinct
sum(isnull(cast([Total Count] as float),0))
from T_Status_Report
where Type = 'LastMonth' and OrderVal = '1'
View 9 Replies
View Related
May 4, 2007
I have a problem with a SQL SELECT query. As far as my research goes i figured out that UNIQUE is used when you have one column that you whant unique and DISTINCT is used when you have more than one column that you want to all be unique. But i have a query where i want just some of the columns to be unique and some not. Here is the full query (It's in a stored procedure):
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[rpt_ExecSum_Combined_4fields](@BondGroupID int)
AS SELECT DISTINCT
SUM(dbo.Bond.LoanAmount) AS SumOfBondValue, COUNT(dbo.Bond.BondID) AS CountOfBond, dbo.ProgressStepType.ProgressStepType
FROM dbo.BondGroup INNER JOIN
dbo.TransactionTable ON dbo.BondGroup.BondGroupID = dbo.TransactionTable.BondGroupID INNER JOIN
dbo.Bond ON dbo.TransactionTable.TransactionID = dbo.Bond.TransactionID INNER JOIN
dbo.ProgressStep ON dbo.TransactionTable.TransactionID = dbo.ProgressStep.TransactionID INNER JOIN
dbo.ProgressStepType ON dbo.ProgressStep.ProgressStepTypeID = dbo.ProgressStepType.ProgressStepTypeID
WHERE (dbo.BondGroup.BondGroupID = @BondGroupID)
GROUP BY dbo.ProgressStepType.ProgressStepType, dbo.ProgressStep.ProgressStepID
HAVING (dbo.ProgressStepType.ProgressStepType = 'AIP (Approval in Principle) received') OR
(dbo.ProgressStepType.ProgressStepType = 'Grants') OR
(dbo.ProgressStepType.ProgressStepType = 'Attorney') OR
(dbo.ProgressStepType.ProgressStepType = 'Feedback received from bank')
ORDER BY dbo.ProgressStepType.ProgressStepType
*********
With the DISTINCT it gives me a full set of unique values but what i want is this: Every CountOfBond may have more than one SumOfBondValue and they may be the same, but if there is more than one dbo.ProgressStepType.ProgressStepType the query should only read it once. In other words the dbo.ProgressStepType.ProgressStepType is a unique value and the rest not...
Please help, my boss is on my case :)
View 14 Replies
View Related
Nov 7, 2007
Im running updates on a table. I would like to only update the table with new records. Right now, Im running a query that will only update the records that were added yesterday. Here is my code:
FROM GRAB where BKDATE = convert(varchar(8), getdate()-1, 112)
I would like to Update like this (incorrect syntax):
FROM GRAB where FCN is distinct
I know the above is incorrect.... what would be correct?
Thanks again
View 15 Replies
View Related
Jun 13, 2007
I created an ouput text file that was perfect until specs were revised today to add quarterly tax and deduction summations for each employee. (Expected turnaround time for new spec: today!)
So my employee record now has 8 records (which I expected) because I had to join it to the pay_summary table. Like this:
SELECT
COALESCE(CONVERT(char(1),e.record_status),'')
+ COALESCE(CONVERT(char(4),'97 '),'')
and many more fields
from employees as e
JOIN emp_taxes as t on e.employee_no = t.employee_no
LEFT OUTER JOIN pay_summary AS p ON e.employee_no = p.employee_no
Where
dateadd(d, 0, datediff(d, 0, p.dated)) BETWEEN '20061231' AND '20070401'
and e.record_status not like 'D'
and t.tax_authority_type = 'F'
and e.company_no = '2' and e.employee_no = t.employee_no
order by e.employee_no
There are 6 or so fields I intend to sum as records to go into the
file. In another language, in order to get one record per employee_no, the syntax would be like this:
sort on employee_no
footing at employee_no
report field_a field_b field_c subtotal field_e field_f subtotal
in which case fields c and f are numeric and summed from the multiple pay_summary records.
What is the (most efficient) SQL command to give only one record per
employee while summing all the detail records?
I can't thank you guys enough for this forum.
Lisa
View 9 Replies
View Related
Jun 10, 2004
Hi All,
I'm struggling with this one.
We have a Street database that can contain multiple entries for one record in our main table. We don't wish to pass duplicate rows back to our end user so I wish to get distinct recno's (the unique identifier for the main table) back from our Street Table.
We have a stored procedure that currently uses Select distinct Recno but I think this is slower than if I used a unique index with ignore_dup_key. Problem is that when I alter the stored procedure it looks like the functionality of the LIKE function is somehow altered. For example Like 'King%' fails to return anything but Like 'King St%' does. I suspect it is the fact that the error "Server: Msg 3604, Level 16, State 1, Procedure" is being generated. How do I code around this server side.
View 2 Replies
View Related
May 30, 2008
Hi
I need to select unique records from a Table. I'm using Distinct Keyword for this purpose. But the result set is showing distinct records in sorted order. I do'nt want to sort records. I need the order in which they are created in table.
Please suggest me the solution for this problem.
Thanks
Regards
Avinash Vyas
View 4 Replies
View Related
Sep 21, 2015
I am building a view to be used to drill down into a Lightswitch app I'm building and to drive this I want to use a view based off the selection of that value several other values will be given to the user to choose from related to the first selection. I've created a view using the following statement:
SELECT DISTINCT TOP (100) PERCENT ARSFamily, ARS_Index
FROM dbo.csr_standards_cmsars
ORDER BY ARSFamily
but the results come back with ALL the records of the source table (509 rows) when there should have only been 29 rows returned (the appropriate number of families or unique groups). The index is necessary to have Lightswitch use the view as a data source.what I'm doing wrong here?
View 2 Replies
View Related
Oct 23, 2001
hi!
i am trying to get a count of 3 distinct values , one of them being a datetime - am running into errors - any suggestions are appreciated.
select count(distinct individualid + intakeseq + exitdate)from #temp
i am trying to do a distinct on individualid + intakeseq + exitdate,
& then get their count.
Thanks!
View 3 Replies
View Related
Mar 14, 2007
Hello
for mS SQL 2000
with
SELECT DISTINCT Name, Region
FROM Groups
GROUP BY Name, Region
I get 254 rows
but how can I get the COUNT only ?
something like
SELECT COUNT(SELECT DISTINCT Name, Region
FROM Groups
GROUP BY Name, Region) AS CPT FROM Groups
i must get 254
thank you for helpings
View 4 Replies
View Related
Mar 23, 2007
hi all,
sometimes, when tables are poorly joined, we have exactly same rows as a result.. so we use distinct.. but how can we count(*) the distinct rows?
select distinct d.docrefid from tbljobDocuments d
left join tbljobitems j on j.docrefid=d.docrefid
where d.docrefid='DC01C06027' and j.itemid='39J1667-H86700'
will return me
docrefid
DC01C06027
but when i try to count(*) only the distinct record, it count all..
select distinct d.docrefid, count(*) from tbljobDocuments d
left join tbljobitems j on j.docrefid=d.docrefid
where d.docrefid='DC01C06027' and j.itemid='39J1667-H86700'
group by d.docrefid
will return me
DocrefId Count
DC01C060272
when i expect
DocrefId Count
DC01C060271
~~~Focus on problem, not solution~~~
View 3 Replies
View Related
Nov 9, 2007
Hi,
I have write down following query ..
select a.patientid, a.providerid
from PatientDrugList a
JOIN Admin..Loadinstance b on a.intLoadInstanceId = b.intLoadInstanceId
where a.MailReasonTypeId = -1
and b.SubClientId = 22
and b.StatusTypeId > 0
Now how could I get distinct patientid count and distinct providerid count
Reply soon
View 2 Replies
View Related
Jul 20, 2006
Hi
I have a table which stores the shift information for employees. The table contains 10 columns as Employeename,Employeeno,month,year,shifttimings etc. If an employee works a day in a particular shift, then a row will be inserted in to the above table for that employee.
Now at the end of the month i wanted to calculate the shift details for each employee for a particular month of a given year like employeename,employeeno, noofdays(countof shiftdays).
Can some body help?
Thanks in Advance!
Santhosh
View 4 Replies
View Related
Nov 30, 2003
I have an SQL statement that looks like the following:
SELECT [Docs-Entities].entityID, entityName, COUNT([Docs-DocsEntities].filename) AS numDocs
FROM [Docs-Entities] LEFT JOIN [Docs-DocsEntities]
ON [Docs-Entities].entityID = [Docs-DocsEntities].entityID
GROUP BY [Docs-Entities].entityID, entityName
but the problem is that numDocs (the COUNT) is not returning a distinct count. In the DocEntities table, a particular document can actually have multiple entries with the same entityID so that produces inflated numbers for numDocs. But when I do a SELECT DISTINCT on a particular entityID, the results are less and don't match the numDocs number because I only need to list the document one time. This is not a huge issue, but it looks bad on my site.
Is there a way that I can make COUNT count distinctly?
Thanks for the help and I hope I worded that cllearly...
View 2 Replies
View Related
Aug 17, 2005
I'm struggling to fin a way to use DISTINCT keyword with ROLLUP (or Cube).For example,SELECT employee_city, employee_country, COUNT(DISTINCT employee_name)FROM employeeGROUP BY employee_city, employee_country WITH ROLLUPthat query does not work.Is there a workaround?Thx.
View 2 Replies
View Related
Jan 28, 1999
hi, I have a table that contain(custname,ordno,ordchange,ordlocation,reaso n)
I want to determine the following:
how many orders per customer,how many orders changed per customer,how many order location per customer, what reason for change per customer,
here what I wrote as a query, tell me if I am right. I thank you for your help
select custname, COUNT(DISTINCT ordno) ,
COUNT(DISTINCT ordchange) ,
COUNT(DISTINCT ordlocation) ,
COUNT( reason)
from customers a, orders b
where a.custname =b.custname
group by custname
View 1 Replies
View Related
Jul 19, 2006
helloi want to do only one query for :SELECT DISTINCT Name FROM UsersSELECT COUNT(Name) AS Names FROM Users WHERE (Name LIKE 'xxx')something like :SELECT Name, COUNT(Name) AS Names FROM Users WHERE Name IN (SELECT DISTINCT Name FROM Users)i must get :Joe 23julie 17.....thank you
View 3 Replies
View Related
Aug 30, 2006
Hi,
I want a count of distinct rows in a table through a single query -- is it possible?
eg.
table-
create table ch1 (a int, b int, c int, d int)
insert ch1 values (1,1,1,1)
insert ch1 values (2,2,2,2)
insert ch1 values (1,1,1,1)
insert ch1 values (2,2,2,2)
insert ch1 values (1,3,4,5)
Here distinct row count in a table is 3 which I want to achieve thro a query.
if I do
select count(distinct a) from ch1 it works fine and gives me output as 2.
but this is not working
select count(distinct a,b,c,d) from ch1 - any workaround to find the distinct row count in a table??
Please reply.
Cheers!
Ram.
View 7 Replies
View Related
Dec 11, 2007
I have a table with following fields
tdate
custcode
prodcode
table is filled with full year data and i want following result
I want count of distinct custcode in every past three months.
for example
Result like this
month tjan tfeb tmar tapr tmay ..... tdec
prod1
prod2
.
.
prod5
And data under tmar should be count of distinct custcode of (jan,feb and mar) for corresponding prod code is required.
Under tapr, count of distinct custcode of (feb,mar and apr) for corresponding prod code is required.
Can any1 help me please.
I am using MS SQL 2005 and above table is a big table (approx 10 million records)
Sham
View 13 Replies
View Related
May 15, 2008
how can i count in sql the number or records taht would be returned if i did
select distinct site,date from allrecords
View 1 Replies
View Related
Apr 10, 2008
have a table hits with following fields with sample Data
Code: CreatedOn: HitId
4 2008-04-01 2
4 2008-04-01 2
4 2008-04-02 2
5 2008-04-02 4
5 2008-04-02 4
5 2008-04-02 20
5 2008-04-03 5
4 2008-04-03 6
3 2008-04-04 9
5 2008-04-04 12
____________________________________________________________
i want to create a query to get count of the code per day. And Count Having unique HitId
__________________________________________________________
Code: Date: Total_Count: UniqueHit_Count
3 2008-04-04 1 1
4 2008-04-01 2 1
4 2008-04-02 1 1
4 2008-04-03 1 1
5 2008-04-02 3 2
5 2008-04-03 1 1
------------------------------------------------------------
How can i do this to count code per day and uniqueHit count in a single query?
I am using sql server 2005.
Muhammad Saifullah
View 1 Replies
View Related
Oct 14, 2007
hello,
i have a working stored procedure SELECT CommentID, UserName, PictureID, DateCommented, COUNT(CommentID) OVER (PARTITION BY PictureID) AS 'NrOfComments'
FROM Comments WHERE PictureID = @PictureID
witch returns among others the number of comments for a picture
i need to select the number of distinct users who commented that user too, so i added this at SELECT statement, COUNT(DISTINCT UserName) AS 'Expr1'
i get that error:
"Colum 'Comments.CommentID' is invalig in the select list beacuse it is not contained in either an aggregate function or the GROUP BY clause."
what should i do, to select the number of distinct users who commented on a specific picture?
here are the table rows, if you need that
CommentID --- UserName --- PictureID --- DateCommented
please help me, thank you
View 5 Replies
View Related
Mar 28, 2007
It doesn't seem possibly, but maybe?
Is there a way to have an expression be used, but also benefit from using distinct on a column?
I'm looking for something like:
sum(case when dtEntered > '1-1-2006' then 1 else 0 end)
but also encorporating somehow a distinct count on UserName. So a username showing twice would only count once, and this would only be counted if the record's dtEntered date was greater than Jan 1, 2006.
The reason I'm writing the statement that way is because there are 5 columns which aggregate data by different time periods.
If it's not possible, I will just end up joining to the table multiple times, putting the date filter in the where clause.
View 3 Replies
View Related
Jul 12, 2004
I am trying to get the below query to work and can't seem to get past this error. Not sure but everywhere I look I think my syntax is right. I am probably missing something obvious but I'm just back from vacation and trying to get in the swing of things. Any help would be appreciated.
Select Distinct(chadcd) as Adjustor, Count (Distinct chclno) as NumberOfCases, Count (Distinct chclno,chwkno)as NumberofClauses
from clmhdr
where chpddt = '20040630'
Group By chadcd
Order by Adjustor
Server: Msg 170, Level 15, State 1, Line 1
Line 1: Incorrect syntax near ',chwkno'.
View 1 Replies
View Related
Apr 17, 2008
I need a query to return the number of distinct call_num(s) between two timestamps.
For example search between 2008-04-17 05:00:00.000 and
2008-04-19 05:00:00.000
Calls
----------
id_tag(unique id) | status | call_num | entry_id(timestamp)
1 HOLD 0123456789 2008-04-17 05:07:00.080
2 ONSCENE 012345679 2008-04-17 05:10:00.012
3 ENROUTE 321654987 2008-04-19 04:00:00.000
so the sample answer would be : 2
View 2 Replies
View Related
Mar 12, 2007
Hello,
I'm fairly new to SQL as so am looking for help with an ad hoc query. The data in focusing on is from table named APs:
FileNo Type PartNo Completed
6 Northbound 1 03/03/2007
6 Northbound 2 NULL
6 Other 1 NULL
6 Other 2 NULL
20 Proof 0 19/07/2006
20 TCP 0 21/07/2006
24 40-Day 1 16/01/2006
24 40-Day 2 16/03/2006
24 Other 0 NULL
44 Northbound 1 16/01/2006
44 Northbound 2 16/06/2006
44 Northbound 3 16/12/2006
44 Northbound 4 01/01/2007
I've tried variations on a SELECT statement like below but have been unable to find a way to count only those types per fileNo that have all partNo completed (and to count all types per fileNo with a partNo of 0 and a completed date as they have no parts):
SELECT [FileNo], COUNT(DISTINCT [Type]) AS CountOfAPs
FROM APs
WHERE (completed IS NOT NULL)
GROUP BY [File]
Total count should be: 4
View 9 Replies
View Related
Jul 20, 2005
I want to build query to return how many rows are in this query:select distinct c1, c2 from t1But SQL won't accept this syntax:select count (distinct c1, c2) from t1Does someone know how to count multiple distinct columns? Thanks.--Disclaimer: This post is solely an individual opinion and does not speak onbehalf of any organization.
View 3 Replies
View Related
Mar 20, 2008
I have a table of users and date when they logged on to a system. I am trying to count how many distinct users logged on for each day of the week. The SQL below works when there's at least a user for each day. But when there is no user for a particular day such as Sunday, I still want it to return "SUN
0 "
I learned that you can use GROUP BY ALL and it works but the "ALL" is deprecated beyond SQL 2005.
------------------------------------
SELECT UPPER(LEFT(DATENAME(dw, StartTime), 3)) AS DayOfWeek,
COUNT(DISTINCT UserID) AS NumberOfUser
FROM testUserLoginDuration
WHERE Archived = 0
GROUP BY UPPER(LEFT(DATENAME(dw, StartTime), 3))
ORDER BY
CASE WHEN UPPER(LEFT(DATENAME(dw, StartTime), 3)) = 'MON' THEN 1
WHEN UPPER(LEFT(DATENAME(dw, StartTime), 3)) = 'TUE' THEN 2
WHEN UPPER(LEFT(DATENAME(dw, StartTime), 3)) = 'WED' THEN 3
WHEN UPPER(LEFT(DATENAME(dw, StartTime), 3)) = 'THU' THEN 4
WHEN UPPER(LEFT(DATENAME(dw, StartTime), 3)) = 'FRI' THEN 5
WHEN UPPER(LEFT(DATENAME(dw, StartTime), 3)) = 'SAT' THEN 6
WHEN UPPER(LEFT(DATENAME(dw, StartTime), 3)) = 'SUN' THEN 7
END
--------------
returns
MON 6
TUE 3
WED 5
THU 3
FRI 2
SAT 1
View 4 Replies
View Related
Mar 17, 2008
Here is my dataset used by my report definition. The combo of barcode and order id is unique. The 'isDiscountedItem' field indicates if the customer used a coupon to purchased an item at a lower price.
departmentId classId barcode orderId isDiscountedItem
----------------------------------------------------------------------------------------------------------------------
1 1 123 1 True
2 7 456 1 False
1 1 123 2 False
1 1 123 3 True
1 1 789 3 True
2 7 456 3 False
... ... ... ... ...
I want to group my report by department id, class id and barcode. Then, I want to count all distinct order ids for which there was at leat one discounted item.
My report would produce the following output considering the above dataset:
Merchandise Number of customers who used a coupon
--------------------------------------------------------------------------------------------------------------
Department 1 2
Class 1 2
Barcode 123 2
Barcode 789 1
Department 2 0
Class 7 0
Barcode 456 0
I've been looking at a possible solution using hash tables defined in the report code but I would like to find a 'cleaner' solution. Any help would be appreciated.
View 3 Replies
View Related
Nov 30, 2007
We have a table of students with fields for the ID of the school district and their school name. For example:
DistrictID
StudentName
SchoolName
10001
John Smith
Washington Elementary
10001
Jane Smith
Lincoln Middle
10002
David White
Hill High
...
...
...
I want is a listing with the school district ID, the student name, and the number of schools in the district.
I believe the following statement should give me what I want:
SELECT DistrictID, StudentName, COUNT(DISTINCT SchoolName) OVER (PARTITION BY DistrictID)
FROM StudentData
However, I get the error:
Msg 102, Level 15, State 1, Line 1
Incorrect syntax near 'distinct'.
If I take out the DISTINCT it runs fine, however it counts all the rows as expected, which is not what I want.
If I remove the OVER clause it runs fine, however, it counds the schools across all the districts, which is not what I want.
I can remove the OVER clause and use GROUP BY, but not while also retrieving StudentName.
The SQL 2005 Online Books don't seem to indicate that my statement is invalid. Here are the links just for reference:
Count: http://msdn2.microsoft.com/en-us/library/ms175997.aspx
Over: http://msdn2.microsoft.com/en-us/library/ms189461.aspx
Anyone have an idea one what I'm doing wrong or how to go about getting this information?
Thanks!
Matt Penner
View 3 Replies
View Related
May 22, 2008
Thanks for taking the time to read my post. I greatly appreciate it!
What i'm trying to do is get a distinct count of account numbers within a rolling period. My actual take is rather large but i've created a smaller-like version below. Please reference this table.
Account
Date
1
1/1/08
2
1/2/08
3
1/2/08
2
2/8/08
4
2/9/08
1
2/15/08
1
3/5/08
5
3/6/08
4
3/9/08
3
3/10/08
1
4/1/08
5
4/9/08
2
4/15/08
3
4/26/08
1
5/3/08
2
5/15/08
3
5/29/08
6
5/30/08
Let's say i want to return distinct count of accounts within a 2-month rolling period meaning in February, i'd get a distinct count for accounts in January & February, then in March i'd get a distinct count for February & March, then in April i'd get it for March & April, and so on... my results table would like the table below:
Account
Month
3
1
4
2
5
3
5
4
5
5
I had asked this before but it was a summing equation and not a unique count. I've tried to play with the summing equation to kind of make it work, but i'm starting to get a headache. It's probably so simple!
Here's my previous post: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2289509
View 8 Replies
View Related
Jun 12, 2006
i am currently trying to build a distinct count on my cube (mssql2005 analysis services).But after i added the discount count on the field i want to and start the processing, the following errors appear.Errors in the OLAP storage engine: The sort order specified for distinct count records is incorrect.
View 17 Replies
View Related
