Distinct name that match both subjects (math, science) from classname in level 2 only. Not sure where to even start. Example table below:
name subject level
bob math 2
hank math 1
joe science 2
bob science 2
joe math 2
ben science 2
carl science 1
We have SharePoint list which has, say, two columns. Column A and Column B.
Column A can have three values - red, blue & green.
Column B can have four values - pen, marker, pencil & highlighter.
A typical view of list can be:
Column A - Column B
red - pen
red - pencil
red - highlighter
blue - marker
blue - pencil
green - pen
green - highlighter
red - pen
blue - pencil
blue - highlighter
blue - pencil
We are looking to create a report from SharePoint List using SSRS which has following view:
red blue green
pen 2 0 1
marker 0 1 0
pencil 1 3 0
highlighter 1 1 1
We tried Sum but not able to display in single row.
Okay, I've been working on this for a couple of hours with no success. I'm trying to find the number of telephone numbers that are associated with multiple students at different school sites. I've created a temp table that lists all phone numbers that are associated with more than one student. I'm now trying to query that table and count the number of telephone numbers that are associated with more than one site. Essentially, I'm looking for parent/guardians that have students at different sites.
Here's an example of what I'm hoping to accomplish:
*In this example, I'm just trying to get a count of the different/distinct school sites associated with each number. If I can, at the same time, limit it to a count of > 1 (essentially excluding parents with students at the same site), even better :)
===================================
Temp table
===================================
SCHOOL | STU_ID | STU_PHONE
101 | 12345 | 111-222-3333
101 | 23456 | 111-222-3333
102 | 34567 | 111-222-3333
101 | 45678 | 999-888-7777
101 | 56789 | 999-888-7777
101 | 67890 | 555-555-5555
102 | 78901 | 555-555-5555
103 | 89012 | 555-555-5555
==================================
Wanted query results
==================================
STU_PHONE | #Students | UNIQUE_SCHOOLS
111-222-3333 | 3 | 2
999-888-7777 | 2 | 1
555-555-5555 | 3 | 3
Been trying to come up with a query to filter-down my sample set intodistinct records. For instance, lets say column1 is a sample set,column2 is the parameter, and column3 is a name and column4 is a type(lets also say there is a fifth column (id) that is an id). What Ineed is one record per type per sample only if type is given, if not,then return that record as well.I've used a subquery to get as close to the desired query is aspossible:select * from table1where id in (select min(id) from table1where column1="A"group by column1, column2)Here's an example of all data for sample "A":1 2 3 4----------A 1 X PA 1 Y PA 1 Z PA 2 WA 3 WA 4 T PA 5 U PA 6 V PA 7 TA 7 UA 7 VI want output :1 2 3-------A 1 X PA 2 WA 3 WA 4 T PA 5 U PA 6 V PA 7 TA 7 UA 7 VExcept the above query will exclude the last two records becausecolumn3 is not 'grouped by'.Basically I need to reduce any 'range' of records per sample (columna) where column4 is not null (ie = 'P'), to only one record andkeeping all others. Thanks in advance:-B
View 6 Replies View RelatedWe have a query in which there are 20,000 rows and 90 distinct ID's
If we say
SELECT distinct siteid ,ts1, ts2, ts3, ts4, ts5, ts6, ts7, ts8
from #TEMPX
we get the 90 distinct values, but if we say
SELECT distinct siteid ,ts1, ts2, ts3, ts4, ts5, ts6, ts7, ts8, ts1avg, ts2avg, ts3avg, ts4avg, ts5avg, ts6avg, ts7avg, ts8avg from #TEMPX
TS1 contains 90 distinct values, whily ts1avg has 2,000 disitinct rows
Is there a way to get Distinct to work against only one column, i.e. SiteID ?
I have a table 'wRelated' with the following columns
[related_id] [int]
[channel_id] [int]
[mui] [varchar]
[price_group_id]
[type_id] [int]
[related_mui] [varchar] (100)
[date_started] [smalldatetime]
[date_ended] [smalldatetime]
[date_entered] [datetime]
[deleted] [tinyint],
[rank] [int]
data in column [mui] is repeated as the table has more than one entries for the same [mui],
The requirement is to select the distinct[mui] but value in all the other columns for the same mui should be select in the next row with null for the same [mui]
The recordset expected should be something like this.
[mui],[related_mui],[price_group_id],[date_entered],[date_ended] m123,rm345,'pr','12-10-2003',12-12-2004'
null,rm789,'ar','12-1-2003',26-2-2004'
null,rm999,'xy','14-12-2002',12-2-2004'
m777,rm889,'pr','12-12-2004',12-12-2004'
null,rm785,'yy','1-10-2002',12-12-2004'
m888,rm345,'pr','2-8-2003',12-12-2004'
null,rm345,'tt','30-7-2002',12-12-2004'
I have tried Unions and temporary table inserts.
12.) Now you have two different tables - each with two columns.Table #1Single Column2 rows with a value equal to 1 and 2Table #2Single column2 rows with a value equal to 2 and 4Construct a statement returning in a single column all the valuescontained, but not the common values.This is another question that I got in an interview, I missedit.......Thanks,Tim
View 1 Replies View RelatedI have integrated sharepoint list data to SQL Server reporting services. I am using the below to query sharepoint list data using sql reporting services.
<Query> <SoapAction>http://schemas.microsoft.com/sharepoint/soap/GetListItems</SoapAction>
<Method Namespace="http://schemas.microsoft.com/sharepoint/soap/" Name="GetListItems">
<Parameters> <Parameter Name="listName">
[Code] .....
By using this query, I am getting a dataset which includes all the columns of sharepoint list. Among these columns, I wanted to display only 2 columns (i.e Region and Sales type) using chart. I have created a Region parameter but when I click preview, the drop down box is giving me all the repeatative values of region like
RG1,RG1,RG1,RG2,RG2,RG2,RG2,RG3..........
I wanted to display only distinct values of Region parameter so that whenever end user select region from the parameter drop down, it will display the respective value of Sales type column.Also when I select only RG1 parameter, it is giving me a chart including the sales type of all the Regions. (it should display me only the sales type of RG1) How can I link these 2 columns so that they will display the values respectively.
Hi All -
I have been killing myself over this -
For the attached table,I want to retrieve records that have a minimum Price for all the groups of Category, Symbol, Date
CategorySymbolDate PriceCoupon
1 IBM01/05/20061005
1 IBM01/05/2006995.8
1 IBM01/06/20061005
1 IBM01/06/20069610
2 IBM01/05/20061026
2 IBM01/05/20061055.7
For a given symbol, date and Category, I want to pull in records with the min(Price). My problem is that if I say,
Select min(Price)
,symbol
,date
,Category from TEST group by symbol, date, Category
I lose the coupon information that is attached to the record that has minimum price and maximum price within the group of symbol, date and Category
My results from the above table should be –
CategorySymbolDate PriceCoupon
1 IBM01/05/2006995.8
1 IBM01/06/20069610
2 IBM01/05/20061026
Thanks for all your help.
Good day!
I have the qry, which is suppose to assigned records to active user (almost 15 users) equal, but it doesn’t- sometime it assigned more to some users and less to others. How could I modify my qry to make sure it assigns the records equals to each user? Please, see the qry below. I will appreciate any help
Thk
UPDATE
TBLFRAUDFINDER
SET
DATE_ASSIGNED=GETDATE(),
FRAUDANALYSTASSIGNED=@FRAUDANALYST
WHERE
FRAUDID=@FRAUDID OR
(FRAUDANALYSTASSIGNED IS NULL AND
((INQUIRY_GOVT_NUMBER=@INQUIRY_GOVT_NUMBER) OR
(CUST_NM=@CUST_NM) OR
(ALERT_IDENTIFIER=@ALERT_IDENTIFIER) OR
(ACCT IN (SELECT
ACCT
FROM
TBLFRAUDFINDER
WHERE
INQUIRY_GOVT_NUMBER=@INQUIRY_GOVT_NUMBER OR
CUST_NM=@CUST_NM OR
ALERT_IDENTIFIER=@ALERT_IDENTIFIER))
HI ALL,
CAN ANYBODY HELP ME TO SOLVE THE ISSUE
I WANNA UPDATE A RECORD OF ONE TABLE WITH VALUES THAT ARE PRESENT IN A COLUMN OF ANOTHER TABLE
OR
CAN I DO THE SAME USING INSERT QUERY
THANKS IN ADVANCE
Hi, I have a difficult case that I need to solve. I will try to be the very clear explaining my problem:
I have a sql query which brings me many records.
This records have a column in common which have the same value (COL1)
There is a second column (COL2) which has different values bewteen these records.
I need to concatenate values from the second column in records with same value in COL1. And I need only one record of the ones that have the same values. If two records have the same COL1 value, only one row should be in my result.
Let me give you an example:
COL1 COL2
RECORD1 1-A HHH
RECORD2 1-A GGG
RECORD3 1-B LLL
RECORD4 1-B MMM
RECORD4 1-B OOO
RECORD5 1-C NNN
Me result should be:
COL1 COL2
RECORD 1-A HHHGGG
RECORD 1-B LLLMMMOOO
RECORD 1-C NNN
It is clear what I need? I dont know if I can solve it through sql or any function inside SSIS.
Thanks for any help you can give me.
I need to run a SELECT DISTINCT query acrossmultiple fields, but I need to add another field that is NON-DISTINCTto my record set.Here is my query:SELECT DISTINCT lastname, firstname, middleinitial, address1,address2, city, state, zip, age, genderFROM gpresultsWHERE age>='18' and serviceline not in ('4TH','4E','4W')and financialclass not in ('Z','X') and age not in('1','2','3','4','5','6','7','8','9','0')and (CAST (ADMITDATE AS DATETIME) >= DATEDIFF(day, 60, GETDATE()))ORDER BY zipThis query runs perfect. No problems whatsoever. However, I need toalso include another field called "admitdate" that should be treatedas NON-DISTINCT. How do I add this in to the query?I've tried this but doesn't work:SELECT admitdateFROM (SELECT DISTINCT lastname, firstname, middleinitial, address1,address2, city, state, zip, age, gender from gpresults)WHERE age>='18' and serviceline not in ('4TH','4E','4W')and financialclass not in ('Z','X') and age not in('1','2','3','4','5','6','7','8','9','0')and (CAST (ADMITDATE AS DATETIME) >= DATEDIFF(day, 60, GETDATE()))ORDER BY zipThis has to be simple but I do not know the syntax to accomplishthis.Thanks
View 2 Replies View RelatedHaving below data. SHCOMP (Customer ID), CBLNAM ( Customer name), SHDESC (service description), SHAMT (service charge), SHTYPE (F-> From T-> To)
CREATE TABLE #Temp(
[SHCOMP] [numeric](7, 0) NOT NULL,
[SHDESC] [char](35) NOT NULL,
[SHTYPE] [char](1) NOT NULL,
[SHAMT] [numeric](9, 2) NOT NULL,
[Code] ....
I need to remove records that have the same ID, Name, Description and Amount summary = 0, For example
SHCOMP CBLNAM SHDESC SHAMT SHTYPE
123 cust1 desc1 45 F remove
123 cust1 desc1 -45 T remove
123 cust1 desc1 45 F remove
123 cust1 desc1 -45 T remove
123 cust1 desc1 45 F
[Code] ....
Results
SHCOMP CBLNAM SHDESC SHAMT SHTYPE
123 cust1 desc1 45 F
123 cust1 desc1 -35 T
234 cust3 desc2 30 F
here is what I did but didn't work because sum is <> from 0 so is leaving all records
select SHCUST, SHDESC, ABS(SHAMT) SHAMT
into #t1
FROM #Temp
group by SHCUST, SHDESC, ABS(SHAMT)
having SUM(SHAMT)=0
order by SHCUST
delete S from #Temp S
join #t1 T on T.SHCUST = S.SHCUST and T.SHDESC = S.SHDESC
Hey gang,
I've got a query and I'm really not sure how to get what I need. I've got a unix datasource that I've setup a linked server for on my SQL database so I'm using Select * From OpenQuery(DataSource, 'Query')
I am able to select all of the records from the first two tables that I need. The problem I'm having is the last step. I need a field in the select statement that is going to be a simple yes or no based off of if a customer number is present in a different table. The table that I need to look into can have up to 99 instances of the customer number. It's a "Note" table that stores a string, the customer number and the sequence number of the note. Obviously I don't want to do a straight join and query because I don't want to get 99 duplicates records in the query I'm already pulling.
Here's my current Query this works fine:
Select *From OpenQuery(UnixData, 'Select CPAREC.CustomerNo, CPBASC_All.CustorCompName, CPAREC.DateAdded, CPAREC.Terms, CPAREC.CreditLimit, CPAREC.PowerNum
From CPAREC Inner Join CPBASC_All on CPAREC.CustomerNo = CPBASC_All.CustomerNo
Where DateAdded >= #12/01/07# and DateAdded <= #12/31/07#')
What I need to add is one more column to the results of this query that will let me know if the Customer number is found in a "Notes" table. This table has 3 fields CustomerNo, SequenceNo, Note.
I don't want to join and select on customer number as the customer number maybe repeated as much as 99 times in the Notes table. I just need to know if a single instance of the customer number was found in that table so I can set a column in my select statement as NotesExist (Yes or No)
Any advice would be greatly appreciated.
Hi,
I'm using SQL SERVER 7.0.
I'm driving myself crazy on this one. I have 2 tables that look like this:
T1T2
C1C2C3C1C2C3
JOE1OTTAWAJOE1TORONTO
MARC1OTTAWAMARC4OTTAWA
GAVINNULLHALIFAXGAVIN3HALIFAX
DARRINNULLHALIFAXDARRIN3HALIFAX
DENISENULLPITTSBURGHDENISENULLPITTSBURGH
LOUISENULLRUSSELLLOUISE2RUSSELL
ANDREA3STITTSVILLEANDREANULLSTITTSVILLE
MARIO66PITTSBURGHGEORGE6KINCARDINE
LARRY6KINCARDINE
MARIO66PITTSBURGH
What I need to do is get all of the records from T2 that don't match EXACTLY to a record in T1. So I figured a LEFT OUTER JOIN should work:
SELECTT2.*
FROMT2 LEFT OUTER JOIN T1
ONT2.C1 = T1.C1
ANDT2.C2 = T1.C2
ANDT2.C3 = T1.C3
WHERET1.C1 IS NULL
But this statement returns the DENISE record when I do this (which has an EXACT match).
So, my thoughts took me to the NULL values in T1.C2 and T2.C2 for this record and I thought that, perhaps, the NULL values aren't being recognized as being equal (as they are UNKNOWN).
So I started digging around and found SET ANSI_NULLS OFF. I tried it but with no luck. Can you offer any insight on this one? What can I do to have NULL values recognized as being equal?
This is the result set that I would like to have returned in this example:
JOE1TORONTO
MARC4OTTAWA
GAVIN3HALIFAX
DARRIN3HALIFAX
LOUISE2RUSSELL
ANDREANULLSTITTSVILLE
GEORGE6KINCARDINE
LARRY6KINCARDINE
I've included a script to build and populate the tables below.
Any help on this will be greatly appreciated.
Thanks in advance,
Darrin
------------------------------------------------
IF EXISTS(
SELECT*
FROMSYSOBJECTS
WHERENAME = 'T1'
)
DROP TABLE T1
GO
IF EXISTS(
SELECT*
FROMSYSOBJECTS
WHERENAME = 'T2'
)
DROP TABLE T2
GO
CREATE TABLE [dbo].[T1] (
[C1] [varchar] (50) NULL ,
[C2] [varchar] (50) NULL ,
[C3] [varchar] (50) NULL
) ON [PRIMARY]
GO
CREATE TABLE [dbo].[T2] (
[C1] [varchar] (50) NULL ,
[C2] [varchar] (50) NULL ,
[C3] [varchar] (50) NULL
) ON [PRIMARY]
GO
INSERT T1 VALUES('JOE', '1', 'OTTAWA')
INSERT T1 VALUES('MARC', '1', 'OTTAWA')
INSERT T1 VALUES('GAVIN', NULL, 'HALIFAX')
INSERT T1 VALUES('DARRIN', NULL, 'HALIFAX')
INSERT T1 VALUES('DENISE', NULL, 'PITTSBURGH')
INSERT T1 VALUES('LOUISE', NULL, 'RUSSELL')
INSERT T1 VALUES('ANDREA', '3', 'STITTSVILLE')
INSERT T1 VALUES('MARIO', '66', 'PITTSBURGH')
GO
INSERT T2 VALUES('JOE', '1', 'TORONTO')
INSERT T2 VALUES('MARC', '4', 'OTTAWA')
INSERT T2 VALUES('GAVIN', '3', 'HALIFAX')
INSERT T2 VALUES('DARRIN', '3', 'HALIFAX')
INSERT T2 VALUES('DENISE', NULL, 'PITTSBURGH')
INSERT T2 VALUES('LOUISE', '2', 'RUSSELL')
INSERT T2 VALUES('ANDREA', NULL, 'STITTSVILLE')
INSERT T2 VALUES('GEORGE', NULL, 'KINCARDINE')
INSERT T2 VALUES('LARRY', NULL, 'KINCARDINE')
INSERT T2 VALUES('MARIO', '66', 'PITTSBURGH')
GO
I have two select statements; one for open purchase orders, one for open customer orders. I would like to be able to combine the query based on i.item in the top statement joined with c.item from the bottom statement. The i.item is related to a specific c.item, but they do not have the same values. In this case I want to join based on.
p.item=i.item where
1001099548=1001099550
84162359=84198545
84532300=84532293
47547523=47547951
305545A3=87433653
87444977=87444975
left side coming from p.item = right side coming from c.item.
Here are my statements.
--#1 OPEN PO's
SELECT p.item
,(p.qty_ordered-p.qty_received) as POQtyRemaining
,i.item
,i.qty_on_hand
,p.po_num
[Code] ....
The below stored procedure is used to create a vertical benchmark line on the X-Axis which has a hour scale. I use the stored procedure to find out which temperature crosses or equals the threshold temperature (340), then plot the vertical benchmark line at the hour the first temperature is equal to or greater than 340 degrees and less than 1000 degrees.
The logic below works if the temperature is equal to or greater than 340 degrees and less than 1000 degrees. THE ISSUE is I have 8 temperatures if they don't cross the threshold of 340 degrees I need to set a default value for my vertical line. In other words if the temperature is 180 and my threshold is 340 then set my vertical line on the highest temperature close to 340.
I tried removing my Where clause (but then it breaks the logic for those temperatures that are equal to or greater than 340). I tried using Case When but this didn't give me what I want either. I tried UNION as well. All giving me results I don't want.
Here is what I am looking for:
This first example is one where there was a temperature that was equal to or greater than the threshold of 340 degrees. This is CORRECT
Code:
first_to_cross_thresholdAgeSampleDateDiffAgeovenStartTimestampAgeovenCompleteTimestamp
2014-02-04 19:24:003.3500002014-02-04 16:02:13.0002014-02-05 05:02:13.000
If 8 temperatures did not equal or cross the threshold then give me the hour of the highest temperature close to the threshold but do not return 0.
For Example:
temp1 92
temp2 108
temp3 0
temp4 284 <<< this is the closest to the threshold so give me the hour when this occurred.
temp5 2192 *Remember I can only count temperatures less than 1000 degrees. Anything above 1000 degrees mean there is nothing in the oven. So it is false/positive.
temp6 102
temp7 0
temp8 12
Code:
first_to_cross_thresholdAgeSampleDateDiffAgeovenStartTimestampAgeovenCompleteTimestamp
2014-02-05 00:30:001.3000002014-02-05 02:00:13.0002014-02-05 02:00:13.000
Code:
CREATE PROCEDURE [dbo].[AgeScoreCardThreshold_JJ_12232013]
-- Add the parameters for the stored procedure here
@LicenseNumber int = NULL,
@Lot varchar(50) = NULL
[code].....
I have a report that I am running in visual studio 2010, that gets its data from a few different stored procedures in a SQL 2012 Database. The variables are Date and Office Code. We currently have 6 different office codes. One of the Stored Procedures gets call information for each office. With the report we can select any single office or any combination of offices to compile data.
The problem I have is two of these share phone information, so when you select either one or both of them the same data gets returned. So for example we have office codes of AAAAA, BBBBB, CCCCC, DDDDD, EEEEE, and FFFFF. Now AAAAA, and BBBBB share phone information so if you select office code AAAAA, the phone info that is returned is for AAAAA, and BBBBB, and visa versa. So I am not sure how to accomplish that either in the report or in the stored procedure.
I'm trying to update a value into a table a sum. The two tables have ID values. These ID values appear once in Table1 and multiple times in Table2. I'm currently trying to sum up the values in Table2 where the IDs are equal to Table1 and then update the value:
UPDATE [Table1] SET
[Total] =
(SELECT SUM([Table2].[QTY]) FROM [Table2],
[Table1] WHERE [Table1].[ID] = [Table2].[ID]
GROUP BY [Table1].[ID])
FROM [Table1], [Table2] WHERE [Table1].[ID] = [Table2].[ID]
Im doing a report on total sales, however my statement below will return values that are equal to both fields ONLY.For example I want to do a query using two text boxes 'from' and 'to 'and count the total sales between the product dates 'Veh_Tyres_Date' and Veh_Parts_Date and 'Veh_Tyres Price' and Veh_ Parts Price'. however it works but if for example I do a search for 01/05/2015 from 31/05/2015 it will not return anything if the second field doesnt contain a sales date between that period.
SELECT tblVehicles.Veh_Parts, tblVehicles.Veh_Parts_Date, tblVehicles.Veh_Tyres, tblVehicles.Veh_Tyres_Date
FROM tblVehicles
WHERE (((tblVehicles.Veh_Parts_Date) Between [Enter From Date] And [Enter To])
AND ((tblVehicles.Veh_Tyres_Date) Between [Enter From Date] And [Enter To]));
All I have a table full of invoices and in that table there is a field named HCC. An invoice can contain multiple HCC's. I also have a table named hierarchical codes (below is an example)
(COL1)HCC...........(COL2)If any of the HCCs in this column exist on an invoice along with the HCC in column 1 then use HCC listed in column one
1
2
3.......................4
4
6
8.......................9 ,10 ,11 ,12 ,13
[code]...
I want to return invoice 1 with HCC set to 34 since the hierarchy for when any of these HCCs (35 ,36 ,37 ,38) exist on an invoice along with 34 is 34.
suppose i have aDataset with 11 rows. field1 with 5 rows of aaa, 6 rows of "bbb"
I want's some thing like
field1 rowcount
aaa 5
bbb 6
Dear Friends,
In my report, I am having Listbox for users to choose Country, City & Company.
The user can choose Country. Based on the country selection, cities will be listed out.
Based on the city selection, Companies will be listed out.
They can choose companies.
Now, I have to show two set of results.
A. List of Companies as per selection ( dataset with equal to selection )
B. List of Companies which are not selected ( ie dataset with not equal to selection )
I have created a dataset with all companies and filter it by selection. When I tried with the filter option in the Dataset, I am able to check for only one value and not for multiple value. If the selection is one company, then I can filter it. But if they choose 5 companies, I am not not able to filter it. Is there any other option I can try out.
Please advice. Thanks.
warm regards
Rakin
Singapore.
I want to set a column to 0 if it is set to a certain number. There are several columns to check though, so I am wondering if I can do it all in one query, or if I have to do it in single queries?
here is an example:
account | contact_id_1 | contact_id_2 | contact_id_3
433 | 67 | 23 | 67
so I want to set any contact_id_N = 0 where contact_id_N is = 67
so in the end, the table will look like this:
account | contact_id_1 | contact_id_2 | contact_id_3
433 | 0 | 23 | 0
is there a way to do it in one statement?
I have an SSIS package that imports data from an Excel file, replaces any value in Excel that reads "NULL" to "", then writes the data to a couple of databases.
What I have discovered today, is I have two columns of dates, an admit date and discharge date column, and what I need to do is anywhere I have a null value in the discharge date column, I have to replace it with the value in the admit date column.
I have searched around online and tried a few things using the Replace funtion in Derived columns but no dice so far.
I want to add $ symbol to column values and convert the column values to western number system
Column values
Dollar
4255
25454
467834
Expected Output:
$ 4,255
$ 25,454
$ 467,834
My Query:
select ID, MAX(Date) Date, SUM(Cost) Dollars, MAX(Funded) Funding from Application
COST is the int datatype and needs to be changed.
record_id Status Due_date549In Progress2004-06-02 00:00:00.000549Not Started2004-06-07 00:00:00.000549Not Started2004-06-08 00:00:00.000549Waiting 2004-05-31 00:00:00.000549Waiting 2004-06-04 00:00:00.000550Completed2004-05-05 00:00:00.000551Completed2004-05-06 00:00:00.000551Completed2004-05-07 00:00:00.000551Completed2004-05-10 00:00:00.000551Not Started1900-01-01 00:00:00.000552Not Started1900-01-01 00:00:00.000Hi I have this table with 3 columns.. What I want isDistinct(record_id),max(due_date) and Status.. I tried thisselect distinct(record_id),status,(due_date) from table1 where(due_date) in(select max(due_date) from table1 as A where a.record_id=record_idand a.due_date is not null group by a.record_id,status)So the result that I want isRecord Status Max(due_date)549Not Started2004-06-09 00:00:00.000550Completed2004-05-05 00:00:00.000551Completed2004-05-10 00:00:00.000Any help is appreciated..ThanksAJ
View 3 Replies View RelatedI HAVE A SELECT STATEMENT WITH TEACHERS AND STUDENTS AND SOMETHING ELSE TOO.
FOR EACH TEACHER I ONLY NEED ONE(FIRST ONE) STUDENT.
HOW THE STATEMENT SHOULD BE?
SELECT DISTINCT .... TID, SID, SOMETHING ???????
Hi, i hope i'm asking this on the right forum.
My problem is:
I need to select only distinct columns from a table, for this i can use: "select distinct username from table_user" but this is not working each time .... someone told me that i can use "alias" ... what does this means and how can i use alias for geting only distinct usernames from my table???
hope that is here someone that can help me ... !
10x
David Palmer SQL Manager
Hi
I have a table with a user column and other columns. User column id the primary key.
I want to create a copy of the record where the user="user1" and insert that copy in the same table in a new created record. But I want the new record to have a value of "user2" in the user column instead of "user1" since it's a primary key
Thanks.
I have a SQL Query issue you can find in SQL Fiddle
SQL FIDDLE for Demo
My query was like this
For Insert
Insert into Employee values('aa', 'T', 'qqq')
Insert into Employee values('aa' , 'F' , 'qqq')
Insert into Employee values('bb', 'F' , 'eee')
Insert into Employee values('cc' , 'T' , 'rrr')
Insert into Employee values('cc' , 'pp' , 'aaa')
Insert into Employee values('cc' , 'Zz' , 'bab')
Insert into Employee values('cc' , 'ZZ' , 'bac')
For select
select col1,MAX(col2) as Col2,Max(Col3) as Col3
from Employee
group by Col1
I supposed to get last row as
cc Zz bab
Instead I am getting
cc Zz rrr
which is wrong
Consider this scenario.
I have two database in the sql server and consider that i have a query which has 4 tables inner joined.
When i execute the query in the database1 , the query is returning rows, But when i execute the same query in the database2, the query is not retuning rows . I know that the
no rows are returned because of missing data in the database2. But have no idea how to trace what values are missing in the database2. Please note the tables is having a huge
list of records by which manually comparison is painfull. Please consider i dont have any background idea of the values in the tables but just using it. Any help would be
appericated.