have SQL Server 2005 std edition SP1 installed on Windows 2003 Std edition .Configured Transactional (single Publisher and no clustered environment.)
Replication past two months working fine, Now
1.Distrib.exe application err is coming.
Due to which my job is failing (Distributor to Subscriber).
Iam attaching thw file.
Thanks
Sandeep
hello folks
i have recently started to work with the analysis services and i am having some problems.
i have made a web application that for now just tries to connect to an analysis server.
The server is installed on an xp sp 2 system.
for testing, i used my local computer, which is running also win xp sp2. After deploying, the application can connect to the AS server on the other machine. the problem occurs when i try to deploy the applicatuion on the production server, which is running win 2k3 server on 32 bit. When deploying, i use the same connection string, so it should try to connect to the AS server installed on a win xp sp2 system.
The first thing that came to my mind was to check the MDAC versions, be cause of the message: "Provider cannot be found. It may not be properly installed."
on my computer, where the application worked ok, the version is MDAC 2.8 SP 1 Windows XP SP 2
on the win2k3 server, the MDAC version is : MDAC 2.8 SP2.... i thought it was the version of the service pack, so o searched for the update of MDAC 2.8 SP1, trying to install mdac 2.8 sp2 to see if i was to see the same error, but i found that mdac 2.8 sp2 is only for win2k3 server, and for win xp is mdac 2.8 sp1, according to this link: http://support.microsoft.com/default.aspx/kb/884103
Now i got confused and have no clues how to make this work...
Can anybody give any hint?
When I try to install SQL server 2005 developer edition I get an error about:
Application popup: setup.exe - Application Error: The application failed to initialize properly (0xc0000005). Click on OK to terminate the application.
I have Cisco security agent and Symantec AntiVirus running on the machine, so they maybe interfering with the install. Unfortunately, I cannot shut them off.
Any ideas on what is causing the issue and how to verify that is the problem? Thx.
hi ,
i am creating a service broker application between two different instance.when i am initiating a dialog from the source my message remain in the sys.transmission_queue.but its transmission_status column is empty.
i attached the profiler with both source and target by including all the service broker event.
in my source profiler i am getting the error like -- Connection attempt failed with error: '10061(No connection could be made because the target machine actively refused it.)'. with event Broker:connection
and in the target profiler error is --This message could not be delivered because the security context could not be retrieved. with event Broker:Message Undelivarible.
i have checked my port also using telnet with remotely and localy both working fine. i am using port no. 4001
and i have mentioned the port no. in the address of the route.
bt still getiing the error.
please help!!!!!!!!!!!
Here is the full message from the Event Log.
Failed to initialize Distributed COM (CoInitializeEx returned 80010119). Heterogeneous queries and remote procedure calls are disabled. Check the DCOM configuration using Component Services in Control Panel.
Any ideas as to how to troubleshoot or solve this?
Thanks!
When I boot my computer (Windows Home Premium 64bit) there is a pop up that says "Configuration System failed to initialize" and I don't know what might cause this..
View 2 Replies View RelatedI have a procedure that works fine from SSMS but sometimes fails when running via SQL Agent. The SP sends emails..Here is the error message "Failed to initialize sqlcmd library with error number -2147467259"
<p>Javier Villegas | <a href="http://www.twitter.com/javier_vill" target="_blank" title="Twitter" rel="nofollow"> @javier_vill</a> |Â <a href="http://sql-javier-villegas.blogspot.com/"
rel="nofollow">http://sql-javier-villegas.blogspot.com/</a></p>.
We have a Web application that requires user authentication. We have a Login Page for user's to login and be authenticated. We also manage the user accounts using SQL Server Membership Provider. We created aLogin user in SQL Server and used this user's privileges to connect to SQL Server in our website's connection strings. Example, in our Web.config file, the connection string is:
<connectionStrings>
 <addname="MyConnectionString"connectionString="Server=MYSERVERNAMESQLSERVER2012;Initial
Catalog=MyDatabase;User Id=TUser;Password=MyPassword"providerName="System.Data.SqlClient"/>
</connectionStrings>
The problem now is when a user logs in, it's throwing an error that TUser's password has already expired. We did not enforce the password policy and expiration date for this user. So, I'm wondering why it's giving me this error.
I've created a database in SQL Express and I have a Windows form attempting to connect to it through SQL Authentication. Connection string:
private string connString = @"Data Source=.sqlexpress;Initial Catalog=SQLTestDatabase;User ID=SearchAppRole; Password=password;";
The role I have added to the database is an Application Role. It has been added to the Database permissions with Grant checked for "Select" and "Authenticate".
If I test this with query analyzer, it returns expected results (if I remove Grant from 'Select', it fails)
sp_setapprole 'SearchAppRole', 'password'
select * from recipe
If I edit my connection string (for testing purposes) to use the sa account, the application can connect and run the Select statement:
private string connString = @"Data Source=.sqlexpress;Initial Catalog=SQLTestDatabase;User ID=sa; Password=sa_password;";
However, I cannot get the application to successfully logon and run the select statement when using the user id and password of the Application Role. I get error:
System.Data.SqlClient.SqlException: Login failed for user 'SearchAppRole'. at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj
I can't find much information on Application Role...I just want one basic permission for the application as a whole. Any help is appreciated. Thanks.
I have an asp.net web application and a web service (both of them are created in VS 2005 - asp.net 2.0). They are located on the same web server. In both web.config files, I have set <authentication mode="Windows"/> and <identity impersonate="true"/>. Also, configured the IIS settings to use Integrated Windows Authentication and unchecked the Anonymous access (for both). The web service is called from the web app, so I have to pass credentials for authentication to the web service. The web service loads and executes a SSIS package. The package and all the other sql objects are located in the sql server 2005 (windows server 2003 - the same server as the web server).
When run the web service from develop environment (vs. 2005), I get whatever I expected. When call it from web application, however, the package failed (no error message).
In the SSIS package, there are three connection managers €“
· A: Microsoft OLE DB Provider for Analysis Services 9.0 Ã connectionType=OleDbConnection
· B: .Net Providers SqlClient Data Provider à connection type=SqlConnection
· C: Native OLE DB Microsoft OLE DB Provider for SQL Server à connectionType=OLEDB
After ran the web application and check the sql database, I can tell that the package was reached and when through the first two steps (clear some records in table_1 and extract some records from table_2 ) which relate to the connection manager B €“ ADO.Net connection. The remaining steps failed which are related to the connection managers A & C.
From SSIS package log file, found that the user credentials (domain and username) were correctly passed from web service to sql server 2005 at the first two events, but the credentials (or operator) changed from domainABCuser123 to NT AUTHORITYNETWORK SERVICE after packageStart. Then, it complains €¦ either the user, domainABCserverName$, does not have access to the database, or the database does not exist.
I think the credentials are passed ok but some setting related to the Analysis services are not correct - complaining start from there. Any clues?
Please help and thank you all!
I have an application that uses an MDF file as a database. Debug mode of application on developing machine works fine.
I synchronize my project to my home computer so that I can work home too. (I use AllwaySync for synchronisation, it copies newer file from the old location overwriting the old ones).
I also have a setup project in my solution for that app.
When I create and install the application on my local computer everything works fine. But when I install it one a different computer and then run it, it cannot connect to database. The error occures while conencting to database saying:
Code Snippet
Unable to open the physical file "C:Program Files........VBDB.mdf". Operating system error 5: "5error not found)".
Unable to open the physical file "C:Program Files........VBDB_log.ldf". Operating system error 5: "5error not found)".
Cannot open user default database. Login failed.
Login failed for user 'EKAROMAEka''.
File activation failure. The physical file name "C:Program Files........VBDB_log.ldf" may be incorrect.
the second time I try run my application I get the following error (and all following tried where resulted in this error):
Code Snippet
Cannot open user default database. Login failed.
Login failed for user 'EKAROMAEka'.
These exceptions are caught by "try catch" when feeding data into DataGridView om my main form.
I have the sam username and password on my Home and Work computers.
I'm not very good at MSSQL security. I don't know how to solve this problem. I can't even understand wheather this is a security that's built in an MDF file or some kind of a Database server issue.
the connection string that I use for connecting to SQL Server is this:
Code Snippet
Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|VBDB.mdf;Integrated Security=True;Connect Timeout=30;User Instance=False
Thanks in advance.
Hello
I have the sql server 2005 express edition. the software stops during the setup and gives me a "failed" message. All other software of express edition are working fine. I am getting the problem only when I am dealing with sql server 2005 express edition. I made sure to deleate all the old version of sql server. uninstalled all the sql server files which were in my computer prior to download the new one. However I am still in troulbe.
As someone suggested that one should uninstale the sqlmsi file so I did that too. Still samething. Any help please......
Hello All,
I have a SSIS package which run well when stand-alone. However
it was failed when executed from .NET web application. It just simply return Failure. Code snip below:
Dim packagekgResults As DTSExecResult
.........
packagekgResults = package.Execute()
Environment: Windows 2003 Shared Server, IIS 6.0
Any idea?
Thanks in advance!
Tina
When i wanna run Application in other computers in network. The following error occurs.
error : System.Data.SqlClient.SqlException: Login failed for user 'Suren-PCGuest'.ConnectionStr = "Data Source=SUREN-PCMSSQLSERVER,1433;Initial Catalog=WorkFlow;Integrated Security=True";
Event ID - 1001 and Event ID - 1004.
Source - MsiInstaller
Error Description for Event ID - 1001:
Detection of product '{8670F53C-8AD7-4F34-BDBA-17B38A18CB65}', feature 'SQL_SSMSEE' failed during request for component '{6EC5DFBD-F6B5-4F02-8432-BFB8B03562B8}'
Error Description for Event ID - 1004:
Detection of product '{8670F53C-8AD7-4F34-BDBA-17B38A18CB65}', feature 'SQL_SSMSEE', component '{180F515D-F56C-40DD-9D71-CC532EA8E286}' failed. The resource '' does not exist.
While opening our SAP Mobile Client Application, in the task manager MSIEXEC.EXE is running and trying to repair the application and this will cause our application to take time to lauch. In the Event viewer, whenever we try to lauch our application we are getting this event id's. Can you please kindly provide a solution for this msg.
Regards,
Thiyagarajan.R
Hi
I have SQL Server 2000 (SP4) running on an Windows 2003 SP 1 server. I have started to get the error message "Connection to application object failed - Ensure no program modules have been deleted" when I go into Enterprise Manager.
I have tried reinstalled SQL Server and applied SP4 but to no effect. Can anyone help?
Mark
System always popup this message:
Application popup: oprd.exe - Application Error : The application failed to initialize properly (0xc0000142). Click on OK to terminate the application.
The application log keeps generating this error message and I can't seem to find any information on it. Can anyone shed some light?
Event filter with query "select * from __InstanceModificationEvent within 10 where TargetInstance isa 'Win32_Service'" could not be (re)activated in namespace "//./root/Microsoft/SqlServer/ComputerManagement" because of error 0x80041010. Events may not be delivered through this filter until the problem is corrected.
We are running a news paper website on Windows 2003 IIS and MSSQL 2005.
I'm facing the error shown bellow. I'm not an MSSQL expert not an ASP or ASP .net developer.
I need some help here to pinpoint the issue. Is it a OS / DB / MSSQL / ASP / ASP .net / Developer bug!
The error
Server Error in '/' Application.
Transaction (Process ID 64) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Transaction (Process ID 64) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): Transaction (Process ID 64) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.]
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +857466
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735078
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838
System.Data.SqlClient.SqlDataReader.HasMoreRows() +150
System.Data.SqlClient.SqlDataReader.ReadInternal(Boolean setTimeout) +214
System.Data.SqlClient.SqlDataReader.Read() +9
System.Data.SqlClient.SqlCommand.CompleteExecuteScalar(SqlDataReader ds, Boolean returnSqlValue) +39
System.Data.SqlClient.SqlCommand.ExecuteScalar() +148
database.setonline(String pagetitle) +262
_Default.Page_Load(Object sender, EventArgs e) +3831
System.Web.UI.Control.OnLoad(EventArgs e) +99
System.Web.UI.Control.LoadRecursive() +47
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1061
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
I recently installed SQL Server 2005 Enterprise on a machine running Server 2003. I have successfully configured Reporting Services (see below for summary of settings)
- Used the defaults for the Repor tServer and Report Manager Virtual Directories
- Windows Service Identity set to domain user. The domain user is part of the administrator group on the machine and has sysadmin rights to the database
- Web Service Identity set to NT AuthorityNetworkService
When I open http://localhost/reports/, I get the following error:
I have check a bunch of forums, but have no success. Any advise would be greatly appreciated!!
Server Error in '/Reports' Application.
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0016: Could not write to output file 'c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.dll' -- 'The directory name is invalid. '
Source Error:
[No relevant source lines]
Source File: Line: 0
Show Detailed Compiler Output:
c:windowssystem32inetsrv> "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727csc.exe" /t:library /utf8output /R:"C:WINDOWSassemblyGAC_32System.Web2.0.0.0__b03f5f7f11d50a3aSystem.Web.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3a890e9c0 068591f_f54cc701ReportingServicesFileShareDeliveryProvider.DLL" /R:"C:WINDOWSassemblyGAC_MSILSystem.Web.Mobile2.0.0.0__b03f5f7f11d50a3aSystem.Web.Mobile.dll" /R:"C:WINDOWSassemblyGAC_32System.Data2.0.0.0__b77a5c561934e089System.Data.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.Web.Services2.0.0.0__b03f5f7f11d50a3aSystem.Web.Services.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.Configuration2.0.0.0__b03f5f7f11d50a3aSystem.Configuration.dll" /R:"C:WINDOWSassemblyGAC_32System.EnterpriseServices2.0.0.0__b03f5f7f11d50a3aSystem.EnterpriseServices.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.IdentityModel3.0.0.0__b77a5c561934e089System.IdentityModel.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.ServiceModel3.0.0.0__b77a5c561934e089System.ServiceModel.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem2.0.0.0__b77a5c561934e089System.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl34a099978 068591f_f54cc701ReportingServicesEmailDeliveryProvider.DLL" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727mscorlib.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3de5a2332 0958a20_f54cc701ReportingServicesWebUserInterface.DLL" /R:"C:WINDOWSassemblyGAC_MSILSystem.Xml2.0.0.0__b77a5c561934e089System.Xml.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3498aee86 042473c_93d0c501ReportingServicesCDOInterop.DLL" /R:"C:WINDOWSassemblyGAC_MSILSystem.Runtime.Serialization3.0.0.0__b77a5c561934e089System.Runtime.Serialization.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.Drawing2.0.0.0__b03f5f7f11d50a3aSystem.Drawing.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3cd47089b 0f2a80e_f54cc701Microsoft.ReportingServices.Interfaces.DLL" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3f180608d 0083daf_b16dc701Microsoft.ReportingServices.Diagnostics.DLL" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl323449648 068591f_f54cc701ReportingServicesNativeClient.DLL" /out:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.dll" /debug- /optimize+ /w:4 /nowarn:1659;1699;1701 "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.0.cs" "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.1.cs"
Microsoft (R) Visual C# 2005 Compiler version 8.00.50727.1433
for Microsoft (R) Windows (R) 2005 Framework version 2.0.50727
Copyright (C) Microsoft Corporation 2001-2005. All rights reserved.
error CS0016: Could not write to output file 'c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.dll' -- 'The directory name is invalid. '
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
I have just upload my site to a which is going to be host the site, the thing is the site runs great on my PC. But when i login or do a search i get an error " Server Error in '/' Application" i know its something to do with the Web config as i read something on here about it but i cant find that post now.
Site URl http://www.team-nat.co.uk
Try the login or click on the stolen marker link and you will see the error im getting.
This is my web config. <configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">
<appSettings/>
<connectionStrings>
<add name="DatabaseConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename="C:Documents and SettingsickMy DocumentsVisual Studio 2005marker-regApp_DataDatabase.mdf";Integrated Security=True;Connect Timeout=30;User Instance=True"
providerName="System.Data.SqlClient" />
<add name="DatabaseConnectionString1" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Database.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True"
providerName="System.Data.SqlClient" />
<add name="ConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|ASPNETDB.MDF;Integrated Security=True;User Instance=True"
providerName="System.Data.SqlClient" />
<add name="ConnectionString2" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|markers.mdf;Integrated Security=True;User Instance=True"
providerName="System.Data.SqlClient" />
<add name="ConnectionString3" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|ews.mdf;Integrated Security=True;User Instance=True"
providerName="System.Data.SqlClient" />
<add name="ConnectionString4" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|messages.mdf;Integrated Security=True;User Instance=True"
providerName="System.Data.SqlClient" />
</connectionStrings>
<system.web>
I know its something to do with the connectionStrings as its pointing to my PC and not at where it should be at the server its running on but i have spent the last 3 hours editing the web config but it does not matter what i do i cant get it to work.
What am i missing here?
Ps Im new to ASP.
Thanks
I created a ASP.net 2.0 application using C# on VS2005 The application access several database on a remote SQL Server 2005I recently added Login functionalties to the application, this created a MDF in the app_data folder.Everything works fine on my local desk top... I can access my remote SQL Server 2005 and the local MDF file works fine, I can create account, login and all that fun stuffSo I Published the site to my target server:Which is the same server running the SQL Server 2005 The parts of the application that does not require login works fine, I can access the SQL server 2005 with ease..see data, update, everythingHowever when ever I try to login or create an account from the application(MDF file) I get this:An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)I can only assume that the problem is with the MDF file. Can anyone point me in the right direction?Thank you Andre
View 2 Replies View RelatedHi guys, I been having a problem, I have a project in asp.net 2.0 connecting to a database in sql server 2000, which works well if I run it from the VDE 2005, but when I pass the project to the IIS it fails, it gives me this error:
Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)Source Error:
Line 15: strSql = "exec sp_UsuaAuto '" & TxtUsuario.Text & "','" & TxtContraseña.Text & "'"
Line 16: Dim DA1 As New Data.SqlClient.SqlDataAdapter(strSql, CnnSql)
Line 17: DA1.Fill(Dsa, "Usr")
Line 18: strSql = "exec SP_SistemAuto '" & TxtUsuario.Text & "','2'"
Line 19: Dim DA2 As New Data.SqlClient.SqlDataAdapter(strSql, CnnSql)
I have been reviewing solutions in the forum but I haven't being able to solve the problem.
Any help would be great, thanks.
I am using ms sql server 2005 Enterprise Evaluation Edition, and I can use the other sample dtabases, like pubs, northwind, but not adventureworksI tried diffrent ways, I am very new to this, and I try before I ask, and I had to give up, Here is what I didwhen I installed adventureworks it was like 166 mb. bigAnd when I tried to use it with visual studio, every time I want to drag a table from: data connections/adventureworks, and try to veiw it in borwser it gives me an application server error, and invalid object namewith northwind database works finethen I tried executing instawdb.sql located C:Progam filesMicrosoft SQL Server90ToolsSamplesAdventureWorks OLTP, from Sql server management studio,And it finishes with errors, and is only 122 mb. bigThis line in red:Msg 4861, Level 16, State 1, Line 1Cannot bulk load because the file "C:Archivos de programaMicrosoft SQL ServerMSSQL.1MSSQLDATAAWDBAddress.csv" could not be opened. Operating system error code 3(error not found).and at the end this:DBCC SHRINKDATABASE: File ID 1 of database ID 6 was skipped because the file does not have enough free space to reclaim.last night I was thinking wether it might be my OS( usning windows xp), or server evalution editionDoes anybody know something about this?I already google search and only found one person with the same problem, but there was no solution posted
View 1 Replies View RelatedHi when i open my DTS package on DTS design , and when i go through different connection and test connection it successfully , when i cancell the step properties i got the error below and thw whole enteprise manager closes, i do not have ant problem with other dts packages except two of them which keep giving me the error below any suggestions
MMC.exe - Application Error
'The instruction @ "0x10001919" referenced memory @ "0x00000004." The memory could not be "read
Dear Friends,
I am getting the error in the subject with error dialog and some instruction at downside.
The instruction at "0x780011cd" referenced memorey at "0x009e99af".
The Memory couldnt be "read".
Click on Ok to terminate the program
Click on Cancel to debug the program.
Plz. help me in this regard.
Mit.
What the hell is this?
View 14 Replies View RelatedGreetings,I am getting a flow of error messages:Error: 17805, Severity: 20, State: 3Invalid buffer received from client.Can anyone shed some light as to how to get rid of them or resolve anyissues that may be causing it?Any assistance would be greatly appreciated.Thank you...Regards,JS
View 1 Replies View RelatedWe currently have a system that uses sql server 2005 mirroring. In testing the application, we fail over the database in the middle of a 2.0 .NET web application. The failover partner is specified in the connection string.
The next request to the web server results in an error page popping up with the message "A transport-level error has occurred when sending the request to the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)"
This message only occurs for the first request to the web server, all subsequent requests sucessfully access the new failed over database.
Thanks for any suggestions.
Hi,
I have created some reports and published them in a customised web site(company dashboard server). Once I click the report, it opens up with Internet Explorer provided by the company(I guess report viewer is embeded in IE).
But the problem is when I try to save it in excel or pdf version, I get the following long error message.
---------------------------------------------------------------------------------------------------------------------------------
Server Error in '/' Application.
Execution 'qd2fh4454r0f3n550oavg22t' cannot be found (rsExecutionNotFound) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Reporting.WebForms.ReportServerException: Execution 'qd2fh4454r0f3n550oavg22t' cannot be found (rsExecutionNotFound)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[ReportServerException: Execution 'qd2fh4454r0f3n550oavg22t' cannot be found (rsExecutionNotFound)]
Microsoft.Reporting.WebForms.ServerReport.GetExecutionInfo() +367
Microsoft.Reporting.WebForms.ServerReport.SetExecutionId(String executionId) +118
Microsoft.Reporting.WebForms.ServerReport.LoadFromUrlQuery(NameValueCollection requestParameters) +101
Microsoft.Reporting.WebForms.ReportDataOperation..ctor() +430
Microsoft.Reporting.WebForms.HttpHandler.GetHandler() +277
Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context) +10
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +303
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
---------------------------------------------------------------------------------------------
Alos if the report has more than one page, I can view only first page. It wont let me to see the second page.
Can anyone help me how to fix this error?
really appriciate
Hey,
don't know if it's the right place for this question but i hope you help me.
I made an application with VS 2005 that connecting to sql server file db.mdf
Now i want this application work on another user computer, and of course i don't want to install vs 2005 there.
I did install .net framework, but what i need to do to make the database work? do i have to install sql server on his computer? or is there something more simple?
I know that if i was using access file than i need to install nothing else.
please help!
thanx.
max
Hello all!
I have been researching this problem on the net. I have everything setup, here is the wierd part. I did a test windows application, and that application connects into my database just fine. I have SQL DEV 2005, everything is on my laptop. I have websites that I have wrote that connects fine.
I have application that give me this error. Now the only thing is that I wrote this windows app on a diffrent machine, with a diffrent SQL 2005 server. I had to move everything on my laptop, so I can finish on site at the clients place. So I grabbed the project, copied it over, and opened it on my laptop. No problems. I created a new database, scripted everything from the other server, and ran those scripts on my laptop to create the tables, SP etc.
Now my test application I created on my laptop, I can connect to the databse just fine with this string.
<add name="TestDataGrid.My.MySettings.TestConnectionString"
connectionString="Data Source=MKE01-2N92461;Initial Catalog=TestDB;Integrated Security=True"
providerName="System.Data.SqlClient" />
I can also connect to the database that I brought over from the other server. Could there be somthing with the Datasets, or something like that?
Any Thoughts?
TIA!
Rudy
i have a login page and a create user page that worked fine when the aspnetdb was attached in mssql ... then i ran the aspnet_regsql.exe program on my database "web_data". then itried to change my web.,config file to reflect this change and now getting errors on both pages :
Here is the error that is displayed locally... Cannot open user default database. Login failed ....seems to be same locally and on the site ... site does not give error details.
Further down is my web.config file.
any help would be appreciated
Thanks
this is the error from the newuser page after the form is filled out and the create user button is pressed:
Server Error in '/website2' Application.--------------------------------------------------------------------------------
Cannot open user default database. Login failed.Login failed for user 'AESEDANjtigner'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.Login failed for user 'AESEDANjtigner'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): Cannot open user default database. Login failed.Login failed for user 'AESEDANjtigner'.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800131 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1932 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +172 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +381 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +357 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +30 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +494 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.Security.SqlMembershipProvider.CreateUser(String username, String password, String email, String passwordQuestion, String passwordAnswer, Boolean isApproved, Object providerUserKey, MembershipCreateStatus& status) +3629 System.Web.UI.WebControls.CreateUserWizard.AttemptCreateUser() +305 System.Web.UI.WebControls.CreateUserWizard.OnNextButtonClick(WizardNavigationEventArgs e) +105 System.Web.UI.WebControls.Wizard.OnBubbleEvent(Object source, EventArgs e) +453 System.Web.UI.WebControls.CreateUserWizard.OnBubbleEvent(Object source, EventArgs e) +149 System.Web.UI.WebControls.WizardChildTable.OnBubbleEvent(Object source, EventArgs args) +17 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1746
--------------------------------------------------------------------------------Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
this is my web.config file ... note the two connections strings .. one for my local host and the other for my site
<?xml version="1.0"?><!-- Note: As an alternative to hand editing this file you can use the web admin tool to configure settings for your application. Use the Website->Asp.Net Configuration option in Visual Studio. A full list of settings and comments can be found in machine.config.comments usually located in WindowsMicrosoft.NetFrameworkv2.xConfig --><configuration> <configSections> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere"/> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/></sectionGroup></sectionGroup></sectionGroup></configSections> <connectionStrings> <!-- <add name="web_data" connectionString="Data Source=sql391.mysite4now.com,1433;Initial Catalog=web_data;User Id=*********;Password=******;;Integrated Security=True" providerName="SqlRoleProvider" /> --> <add name="web_data" connectionString="Data Source=JOHN-PCSQLEXPRESS;Initial Catalog=web_data;User Id=***********;Password=*******;;Integrated Security=True" providerName="SqlRoleProvider" />
</connectionStrings> <system.web> <roleManager enabled="true" defaultProvider="CustomizedRoleProvider"> <providers> <add connectionStringName="web_data" name="CustomizedRoleProvider" type="System.Web.Security.SqlRoleProvider" /> </providers> </roleManager> <membership> <providers> <add name="CustomizedMembershipProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="web_data" /> </providers> </membership> <!-- Set compilation debug="true" to insert debugging symbols into the compiled page. Because this affects performance, set this value to true only during development. --> <authorization> <allow roles="manager" /> </authorization> <!-- <roleManager enabled="true" /> --> <compilation debug="true"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/></assemblies></compilation> <!-- The <authentication> section enables configuration of the security authentication mode used by ASP.NET to identify an incoming user. --> <authentication mode="Forms" /> <!-- The <customErrors> section enables configuration of what to do if/when an unhandled error occurs during the execution of a request. Specifically, it enables developers to configure html error pages to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm"> <error statusCode="403" redirect="NoAccess.htm" /> <error statusCode="404" redirect="FileNotFound.htm" /> </customErrors> --> <pages> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/></controls></pages> <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="GET,HEAD" path="ScriptResource.axd" validate="false" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/></httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/></httpModules></system.web> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" type="Microsoft.CSharp.CSharpCodeProvider,System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" warningLevel="4"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="WarnAsError" value="false"/></compiler> <compiler language="vb;vbs;visualbasic;vbscript" extension=".vb" type="Microsoft.VisualBasic.VBCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" warningLevel="4"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="OptionInfer" value="true"/> <providerOption name="WarnAsError" value="false"/></compiler></compilers></system.codedom> <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <remove name="ScriptModule"/> <add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/></modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> <remove name="ScriptHandlerFactory"/> <remove name="ScriptHandlerFactoryAppServices"/> <remove name="ScriptResource"/> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptResource" verb="GET,HEAD" path="ScriptResource.axd" preCondition="integratedMode" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/></handlers></system.webServer> <runtime> <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"> <dependentAssembly> <assemblyIdentity name="System.Web.Extensions" publicKeyToken="31bf3856ad364e35"/> <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/></dependentAssembly> <dependentAssembly> <assemblyIdentity name="System.Web.Extensions.Design" publicKeyToken="31bf3856ad364e35"/> <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/></dependentAssembly></assemblyBinding></runtime><system.net> <mailSettings> <smtp from="Reservations"> <network host="mail.airportcoach.com" password="rawal" userName="reserve@airportcoach.com" /> </smtp> </mailSettings> </system.net></configuration>