Do I Need To Create A Domain To Get Connectivity To A Report Server Database On A Remote SQL Server Instance?
Oct 23, 2007
I'm setting up a simple SSRS implementation for a non-profit organization, using two servers hosted at a data center. The first server has SQL Server Standard Edition and Reporting Services installed. I've designed and deployed a number of useful reports on this server.
I was hoping to isolate this first server by installing IIS and SSRS on the second server, have users browse from the Internet to that second server (over SSL, of course), and have all reports served up from databases (and, presumably, the report server database) on the first server.
During the installation of SSRS on the second server, however, I'm being prompted to specify the service account. According to the help text:
"Reporting Services. Service accounts are used to configure a report server database connection. Choose a domain user account if you want to connect to a report server database on a remote SQL Server instance. If you are using a local report server database, you can use a domain user account or Local System to run the service."
I believe I want to configure SSRS to connect to a report server database on a remote SQL Server instance; therefore, it appears that I need to enter a domain user account. The only problem is, neither server belongs to a domain; they are members of a simple two-server workgroup.
Does SSRS, configured to connect to a report server database on a remote SQL Server instance, require a domain? Does what I'm hoping to accomplish require a domain? Creating a two-server domain seems like overkill for this implementation, doesn't it?
I appreciate any comments and suggestions. Thanks!
View 1 Replies
ADVERTISEMENT
Apr 17, 2014
We are in web site development company,Previously we don't have proxy configuration, after implementing Proxy , we have an issue to connect a remote database.
The error pops "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. Error 53".
View 1 Replies
View Related
Jul 2, 2015
I had created 2 Sql server instance in 2 servers created using VMware. From the primary server I log shipped the required databases into the secondary. Both the servers were in the same domain whose active directory was also in another server in the same virtual lab environment. My question can we have the primary sql server in one domain and the secondary sql server to which the logs are shipped in another domain by including a router also between the 2 networks for connectivity?
View 6 Replies
View Related
Feb 16, 2007
Hi, I have been creating a web store, which we will be hosting on our Windows Server 2003 system. I am also writing a windows application that will be running on our client systems on the same network/domain. I have no need to allow internet access to the database, just within our domain. Pretty much the windows application will be running and whenever a customer places an order, the program will automatically pop-up the needed information for our credit card processing, and shipping department. So far I have been able to establish a connection to our server by creating a data connection under the server explorer. However, it does not list any databases whatsoever, the web site has been published using Visual Studio 2005 Professional on the server, and is in 100% working order. I have searched and haven't found anything concrete on this, i'm sure its just something simple that im missing. It appears that the server is definetely connected to the database (since the website is fully functional), but it is not listing the information for other systems to access it. If anyone has any ideas, please let me know. Thank you
View 8 Replies
View Related
Jun 16, 2006
SQL server 2005 express reporting problem.
error message:
This feature "remote access to report data sources and/or the report server database" is not supported in this edition of reporting service
I got this error message when I try to connect to database hosted in another PC running SQL server 2000.
Is it true that SQlL server Express can only use Local Database Engine to host the database?
View 5 Replies
View Related
May 12, 2006
command in principal server
ALTER DATABASE database name
SET PARTNER = 'TCP://<mirror_server_name>:5022'
return:
Msg 1413, Level 16, State 1, Line 1
Communications to the remote server instance 'TCP://<mirror_server_neme>:5022' failed before database mirroring was fully started. The ALTER DATABASE command failed. Retry the command when the remote database is started.
This problem is only in production database any testing database include adventureworks mirroring sucessfuly. Why is problem:?
size? database > 9GB
slow HW? Principal database Intel D 3Ghz,4GB RAM, 4x 15k RPM HDD RAID 5 / Mirror database 2x Xeon 3Ghz,4GB RAM,6x HDD 10k RPM RAID 10
Slow LAN? both servers connect 1Gb/s
please help me
THX
View 17 Replies
View Related
Feb 5, 2008
In my machine , we were used befour sql server2000 and now we are using sql server 2005 ,
So, I have both 2000 and 2005 installed on my machine ,
on my machine i am working on Custome Paging and one function ROW_NUMBER() is not working ,because of i think i am still working on 2000 instance on locally,
Can any one know how can we create an instance of sqlserver 2005 database and work with that?
I want to work with sql server 2005.
View 1 Replies
View Related
Feb 13, 2007
I am an application developer with an existing system developer in SQL Server 2005 Express and Visual Studio 2005.
I have installed the system I wrote at a physician's office, and it is working fine on a local computer utilizing XP operating system.
There is a requirement to allow other terminals to connect to this XP terminal to execute the application, so I am exploring possibilities for connecting remotely from the other computers in the physician's office.
I am running Virtual Machine for my client computer.
I modified SQL Server 2005 on my main computer. I enabled both TCP/IP and Named pipes in the SQL Server Surface Area Configuration utility. I also set SQL Server Browser to start automatically.
The local application is successfully connecting with the following connectionstring: Data Source=localhostsqlexpress;Initial Catalog=MedicalDB;Persist Security Info=True;User ID=sa;Password=thepassword
I realize that I would have to substitute the server name for localhost before I could connect from the application, but I wanted to first "connect" to the database from my second machine successfully before I began trying to connect from my application. I can Ping the pc that is running sql server express, I am able to "telnet" my pc that is running SQL Server Express.
Both my computers are in the same workgroup and there is no domain.
There are no aliases in my configuration, and there is no encryption on the server.
Ther error message I recieve is:
Cannot connect to DDD
An error has occurred while attempting connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under default settings SQL Server does not allow remote connections. (providor: Named Pipes Providor, Error: 40 Could not open a conneciton to Sql Server) (Microsofi SQL Server, Error: 1326)
View 1 Replies
View Related
Apr 24, 2006
I'm using SQL Express with Advance Services & I get this error when I try to deploy my reports. Why do I get this error
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'EDPSYS'. (rsErrorOpeningConnection)
The feature: "Remote access to report data sources and/or the report server database" is not supported in this edition of Reporting Services. (rsOperationNotSupported)
Justin Song
View 4 Replies
View Related
Mar 28, 2008
I am still trying to figure some last issues before installing sql 2005 standard edition.
vista issues, sql 2005 sql sp2 etc
My question is simple actually, It is about configuring administrative accounts on my computer.
I wish to use configure the administrative account?
I wish to use a third party in deploying sql reporting services
Do I need to set up a local account in report manager?
the article in setting up reporting services in vista
uses domain/instance name or computer name/instance name
how do I do correctly set this up? I will be using july 2007 dvd for
sp2 ( I believe) is their any article explaining the steps in sql sp2
some people seem to have trouble in the restore step.....Thanks
I just want to be prepared....can I install cd's without the use of the internet....
View 1 Replies
View Related
Jun 14, 2007
Hi,
Is that possible to execute SSIS packages from a remote SQL Server 2005 in another domain at local computer (Windows XP)?
Can I use SQL authentication to connect to the remote SSIS? My problem is, the user who execute the SSIS is not allow to access to SQL server directly. Is that possible to code everything in a batch file instead?
I tried to use web services to execute the remote SSIS but it always return "authentication error"?
Can someone help?
Many thanks!
Regards,
Mashmallow
View 3 Replies
View Related
Jun 12, 2007
hai,
I am working on ASP.NET 2003 with SQLServer2000. My application requires to be connected to the Database which is there in my Headoffice.
My SQLServerName is "MyDBServerTestDB"
Database Name is "WebTO", UserID="******" and Password="******"
My Remote Server IP Address is "192.168.1.2" and its Static IP is "58.93.61.235"
I have specified the Connection string for my Remote Server as
"Provider=SQLOLEDB.1;Server=58.93.61.235TestDB;UID=******;PWD=******;Database=WebTO"
(or)
"Provider=SQLOLEDB.1;Server=58.93.61.235TestDB,1433;UID=******;PWD=******;Database=WebTO" (1433 is the Port number of the Remote SQLServer)
but it is giving the error " SQL Server does not exist or access denied".
if i execute the same application at my Headoffice (Remote Server) by changing the Connection string as
"Provider=SQLOLEDB.1;Server=192.168.1.2TestDB;UID=******;PWD=******;Database=WebTO"
then, it is working fine.
Can anyone tell me where i went wrong or what i have to specify in my Connection string so that i can access my Remote Database Server.
Thanks in Advance,
Srinivas.
View 7 Replies
View Related
Dec 19, 2006
I have client machine in one domain, say A domain , on which I have installed .net 2.0 without any problem. I have report server running in other domain (B domain) where I have deployed few models which will be used from domain A to create ad hoc reports by launching Report Builder. I can access other reports in domain B from A
But when I click on Report Builder ..it tries to connect to server in domain B but fails to connect and shows following log in a text pop up
I know, problem is because of cross domain communication but question is then how to fix it ? what changes I need to do for that in firewall, domain etc etc settings?
Here is the error, I have highlighted lines which might give some clue:
------------------------------------------------------------------------------------------
PLATFORM VERSION INFO
Windows : 5.2.3790.65536 (Win32NT)
Common Language Runtime : 2.0.50727.42
System.Deployment.dll : 2.0.50727.42 (RTM.050727-4200)
mscorwks.dll : 2.0.50727.42 (RTM.050727-4200)
dfdll.dll : 2.0.50727.42 (RTM.050727-4200)
dfshim.dll : 2.0.50727.42 (RTM.050727-4200)
SOURCES
Deployment url : http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application resulted in exception. Following failure messages were detected:
+ Downloading http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application did not succeed.
+ The remote server returned an error: (500) Internal Server Error.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [12/19/2006 6:49:58 AM] : Activation of http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application has started.
ERROR DETAILS
Following errors were detected during this operation.
* [12/19/2006 6:50:14 AM] System.Deployment.Application.DeploymentDownloadException (Unknown subtype)
- Downloading http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application did not succeed.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState)
at System.Deployment.Application.DownloadManager.DownloadManifestAsRawFile(Uri& sourceUri, String targetPath, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestDirectBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
--- Inner Exception ---
System.Net.WebException
- The remote server returned an error: (500) Internal Server Error.
- Source: System
- Stack trace:
at System.Net.HttpWebRequest.GetResponse()
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.
View 1 Replies
View Related
Oct 19, 2015
We migrated ssrs from 2008 to ssrs 2014.after that we need to move only subscriptions to  New 2014 report server DB.
How to proceed that.
I am trying to insert record in DB. But subscription ID is not identity column. How to do this.
Can I place old Subscription IDS in New 2014 reporting DB?
View 2 Replies
View Related
Jan 17, 2008
I am attempting something that I have done many times before; however, in this instance it continues to fail.
I am trying to connect Management Studio to an instance of SQL Server 2005 Express over a VPN. The Management Studio connect dialog always fails with Error 26.
I have:
Enabled the instance for remote connections €“ both TCP/IP and Named Pipes
Ensured that the instance is enabled for TCP/IP on the VPN address (10.2.1.1) and on port 1433
Ensured that the instance is running
Ensured that SQL Browser is running
Ensured that ports 1433 (TCP) and 1434 (UDP) are open on the firewall for inbound traffic
Rebooted the server following this configuration to ensure that the instance services are refreshed
Tried to connect from three separate clients (albeit on the same remote network)
Disabled the firewall to ensure no further complications (as a last resort)
I have this exact same setup functioning on a separate server.
There is an additional backstory to this problem; however, I will not complicate the scenario with it now. If you feel you can help then I can elaborate further on the server€™s history.
Thanks
James
View 3 Replies
View Related
May 8, 2013
We have 3x instances of SQL Server 2012 installed on a single remote server - there's the default MSSQLSERVER instance, then INSTANCE01 and INSTANCE02. I can remotely connect to the default MSSQLSERVER instance through SSMS, but I cannot connect to either of the additional named instances (INSTANCE01 or INSTANCE02).Â
For example, if I try to connect to "sql.domain.com", I can successfully access the default instance on the remote server. If I try to connect to "sql.domain.comINSTANCE01", I get an error stating
"A network-related or instance-specific error occurred while establishing a connection to SQL Server".
However - if I try to connect to "sql.domain.comINSTANCE01, 49301" (where 49301 is the TCP Port for the TCP/IP Protocol for this SQL Server instance), I am able to successfully connect.
This leads me to think that there's a communication issue with the SQL Server Browser service running on the remote SQL Server and my workstation.Â
The following items have been verified:
SQL Server Browser is running on the remote SQL ServerWindows Firewall has been disabled on the SQL ServerTCP Ports 1433, 1434, 1954, and 49301 have been opened up on the remote destination's firewallUDP Port 1434 has been opened up on the remote destination's firewall.
View 10 Replies
View Related
Sep 26, 2006
I'm trying to run a test from my test environment which is a non-domain Windows 2000 server to access my domain 2003 with SQL2005. I have install 2005 tools to try to access the SQL server.
- I have try following the KB265808 - no success.
- Reading alot of blogs and it seems all are pointing to the same problem. "Remote access" but the settign is enabled.Error Message:
TITLE: Connect to Server
------------------------------
Cannot connect to ardsqldatawh.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=53&LinkId=20476
Question: Could Windows 2003 security be blocking access? I'm using sa account to access.
Also, sa account does not seems to work for remote access. It is ok when accessing locally.
Any help would be appreciated.
949jc
View 1 Replies
View Related
Jul 6, 2015
I try to connect from a pc to a SQL Server on another pc. Both pc’s are in a workgroup. I want to connect from a Windows Forms application to a named instance on the other computer. By now I have been able to connect from one pc to SQL Server on the other with tcp:smurfin, 52782.
I want to be able to use servernameinstancename (instead of portnumber) to make a connection in a Windows Forms application.
I’ve checked / tried te following:
•In the properties of the instance, tab Connections, the option Allow Remote Connections is enabled
•In Configuration Manager: TCP is enabled
•The service SQL Server Browser is started
•On the tab IPAddresses, in the section IPAll, there is NO portnumber for TCP Port. And TCP Dynamic Ports has the nummer 52782
•I have created un inbound rule for port 52782 and also for 1434 (SQL Server Browser). And to be on the save side: a rule for 1433 as well.
•Restarted the service
If I run the following code in SQL Server, that same port number (52782) is returned:
EXEC xp_ReadErrorLog 0, 1, N'Server is listening on', N'any', NULL, NULL, 'DESC'
GO
SELECT local_tcp_port
FROM sys.dm_exec_connections
WHERE session_id = @@SPID
[Code] ....
View 5 Replies
View Related
Feb 5, 2006
ProblemWhen Remote Desktop to my main office machine, and when trying toconnect to SQL Express, I was becoming increasingly frustrated with thefollowing error:Error: 'Failed to generate a user instance of SQL Server due to afailure in starting the process for the user instance. The connectionwill be closed.'What is the solution?Solutions: ( pick any of the 3)1. Obtain and apply the patch http://support.microsoft.com/?id=8966132. Wait for the next Windows Service pack3.Of course if you can not get the patch, you can always do this (Note:You must have WinVnc server running in your remote computer)1. In the remote desktop session, reboot your computer.Click Start->Windows Security->Shutdown->Restart.Wait for some time to get machine up.2. Use your vncviewer to login to your remote computer. You can chooseto do all work via VNC or go to next step.3. Use remote desktop to login (this automatically closes the winvncsession).There you go, You did not create a remote session, but reused yourlocal session.
View 1 Replies
View Related
Jan 13, 2007
Hi,
I want to move one database from the source SQL Server 2000 instance to a new SQL 2000 instance in another machine. I have five user databases in this source SQL instance. How should be my approach to move this single database out of this ? My understanding is restoring this database in the new instance, copying all logins to the new instance and then copying the jobs, DTS packages, alerts, operators only specific to this database will do it. Please let me know if this is exactly what I should do ..
Thanks in advance..
Regards,
Himansu
View 1 Replies
View Related
Jan 13, 2007
Hi,
I want to move one database from the source SQL Server 2000 instance to a new SQL 2000 instance in another machine. I have five user databases in this source SQL instance. How should be my approach to move this single database out of this ? My understanding is restoring this database in the new instance, copying all logins to the new instance and then copying the jobs, DTS packages, alerts, operators only specific to this database will do it. Please let me know if this is exactly what I should do ..
Thanks in advance..
Regards,
Himansu
View 4 Replies
View Related
Nov 3, 2014
I need to connect database engine through SQL Server Authentication and want to disable connectivity through Windows Authentication. Only wanna connectivity through SQL Server, if this is possible then how to proceed further?
View 6 Replies
View Related
Feb 19, 2008
I've uninstalled SQL Server Express and installed SQL Server Enterprise, all the tools where installed, but it didn't installed any server (instance?), and the old {local}SQLEXPRESS is still there, but it really doesn't exist.
- I look up at mipc/manage and there's no sql server running.
- I try to add an instance using the surface configuration, but it gave my this error:
Code Snippet
No SQL Server 2005 components were found on the specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLSAC)
How do I completly remove sql server from my computer, or, how do I add an instance of sql server?
View 4 Replies
View Related
Oct 19, 2005
Dear all,I am having trouble connecting my asp.net pages to a sql server database.I have the database running in visual studio and i can query it using the sql pane.My problem is that i don't know where to put the ADO.net query string or what it should look like.Does visual studio provide a wizard for doing this?Also is it possible to use CSS to change ASP.NET tags, i.e. asp:LabelAny help would be appreciated.Cheers
View 4 Replies
View Related
Jan 9, 2008
Hi,
Im trying to connect IBM U2 XML Database using my ms.net Server explorer.but server not itself getting detected.
Prerequisites :i have installed the following things in my system
1. U2 on my machine and created databaes and tables.
2. IBM Database Add-ins for Vs.net 2005
below are the following steps im trying to connect IBM U2 Xml Database
1.Server Explorer ->Addconnection
Datasource : IBM DB2,IDS and U2 servers
2.in server tab its not showing my server which created using U2
Can any one please guide me in this issue
View 3 Replies
View Related
Jun 26, 2007
If there is one instance in a server and I would like to create another instance, what should I do ?????
Or if my computer is not included any instance, How can I create new instance on my computer ?
????
Please give me any suggestions ......
View 1 Replies
View Related
Nov 27, 2007
I have access to a server with sql server 2005 workgroup edition. It runs an instance of sql server for this huge application we use. I would like to create a new instance of Sql server 2005 so I can play around with it and learn how to use the 2005 version. How can you create a new instance? I want this instance to run alongside the current instance. I can't find out how to do this anywhere. I'm sure it's possible though. Thanks
View 3 Replies
View Related
Jul 13, 2013
I am using SQL server 2008 standard edition. Is there a way to create a new server Instance by a scrip except the default instance.?
View 2 Replies
View Related
Mar 6, 2008
Hi,
I have created and deployed a data source (which uses "Credentials supplied by the user running the report") and a model which uses this data source.
Also I have built a report using Report Builder and all works well.
Now I wish to use Visual Studio to build a report, so I'm trying to create a data source from my computer which the report should use and I want it to use the model on the remote server. In the Report Wizard I am using "Report Server Model" and the following connection string:
Server="http://<remoteserver>/reportserver";datasource="/Models/MyModel"
IHowever I can't make the credentials to work. I've tried them all with no luck. What username/password must I use? Because so far nothing of what I have tried works.
Any help is highly appretiated.
Kind Regards,
Robert
View 3 Replies
View Related
Jul 23, 2005
I'm trying to create a login in the default domain. I know I can pullthis information from xp_loginconfig, but don't see how I can use it inthe context of sp_grantlogin.For example, pull the domain the user is currently logged in on andinsert it into the sp_grantlogin script. Has anyone ever done this inthe past?
View 2 Replies
View Related
Jan 4, 2013
if you can restore a database to Server B using Server A as the service. Meaning we would issue the command on Server A but somehow point to Server B as where we want the restore to happen.
The backup file would be in a location independent of both servers.
View 4 Replies
View Related
Jul 28, 2015
I have built a SQL 2014 Always on Cluster. I need to create three Availability groups and listeners in the same instance. Do I need 3 separate IP address for each listener or one IP address can be shared for all 3 Listeners ?
View 3 Replies
View Related
Aug 3, 2007
System: Win 2003, SQL Server 2005, Using an AD win account that is not a member of the Admin group on the server.
Error message from Management Studio query window:
Msg 7302, Level 16, State 1, Line 1
Cannot create an instance of OLE DB provider "IBMDADB2" for linked server "Sname".
Event messages associated with this error:
App Event ID: 19036
The OLE DB initialization service failed to load. Reinstall Microsoft Data Access Components. If the problem persists, contact product support for the OLEDB provider.
Sys Event ID: 10016
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID {2206CDB0-19C1-11D1-89E0-00C04FD7A829}
to the user domainuser SID (S-1-5-21-126051702-1034962659-2130403006-7826). This security permission can be modified using the Component Services administrative tool.
I€™m getting this error message when trying to run an openquery statement through a linked server to DB2. (SELECT * FROM OPENQUERY(Sname, 'SELECT * FROM tablename€™))
The linked server has a remote login and password that it uses to connect to DB2.
I found this from another post on how to fix this error:
Expand Component Services - Computers - My Computer - DCOM Config Select MSDAINITIALIZE Right Click properties then security
Under Security - Launch Permission: enable Local Launch and Local Activation for your SQL Service account
Under Security - Access permissions: Allow System: Local Access and Remote Access.
After completing these steps I still get the error message but the events are no longer generated. I€™ve also tried different variations of these steps. The only way I can get this to work is to either make the AD user a member of the Admin group on the server or by putting in a user account that has admin rights to the server in the MSDAINITIALIZE properties €“ Identity Tab €“ Run this App as this User.
Can someone please tell me the steps that I€™m missing?
View 11 Replies
View Related
