Does anyone know if the results from a query run in QA automatically go into a tempoary table? For instance if ive just run a query that took 5 minutes but it was a normal select query and after it ran i realised i wanted to query the results could i run a simple command to mke a copy of the result set rather than run the original query into a temp table that would then take a few minutes again?
View 1 RepliesI'm writing a search engine and I want to make a search and then, after
I've recieved the results, put them into some sort of temporary(in
mememory) table so that I can do another query on that temporary table.
I saw something about temp tables (in T-SQL) in the
help guide, but I still want to know how to do a query on a regular
table and then store those results in a temporary table to perform a
query on that. Could anyone show me some example or something?
This may be a dumb question, but I can't seem to get the syntax right. I have two temp tables that have the same columns, I want to do a union on them and store the results in a temp table. Any ideas?
Ie.
select * from #tmpTable1
union
select * from #tmpTable2
into #tmpTable3
Thanks!!!
The dynamic sql is used for link server. What I need is that the result of the dynamic sql put on a temp table. Can someone help. Im getting an error
CREATE PROCEDURE GSCLink
( @LinkCompany nvarchar(50), @Page int, @RecsPerPage int )
AS
SET NOCOUNT ON
--Create temp table
CREATETABLE #TempTable
( ID int IDENTITY, Name nvarchar(50), AccountID int, Active bit )
INSERT INTO #TempTable (Name, AccountID, Active)
--dynamic sql
DECLARE @sql nvarchar(4000)
SET @sql = 'SELECT a.Name, a.AccountID, a.Active
FROM CRMSBALINK.' + @LinkCompany + '.dbo.AccountTable a
LEFT OUTER JOIN CRM2OA.dbo.GSCCustomer b
ON a.AccountID = b.oaAccountID
WHERE oaAccountID IS NULL
ORDER BY Name ASC'
EXEC sp_executesql @sql
--Find out the first and last record
DECLARE @FirstRec int
DECLARE @LastRec int
SELECT @FirstRec = (@Page - 1) * @RecsPerPage
SELECT @LastRec = (@Page * @RecsPerPage + 1)
--Return the set of paged records, plus an indication of more records or not
SELECT *, (SELECT COUNT(*) FROM #TempTable TI WHERE TI.ID >= @LastRec) AS MoreRecords
FROM #TempTable
WHERE ID > @FirstRec AND ID < @LastRec
Error:
Msg 156, Level 15, State 1, Procedure GSCLink, Line 22
Incorrect syntax near the keyword 'DECLARE'.
I am try to insert the results from the query into new temp table but keep geeting an error for Incorrect syntax near ')'.
select * into tempCosting
from
(
select top 10* from itemCode itm
where itm.type= 1
)
All,
I'm trying to store the results of my store procedure in a temp table. when I try it, I got the error saying...
"Insert exec cannot be nested"
I suspsect this is because I have a Insert Exec statement inside my stored procedure...
Is there any way to come over this issue ?
syntax of my code...
create table #Temp1 (ID int)
insert into #Temp1
EXEC SP1
when I try to run the above code I get the error "Insert exec cannot be nested"
SP syntax :
Create Procedure SP1
as
Begin
create table #Temp2
statements.....
Insert into #temp2
exec SP<Name>
staments.. cont...
END
Is it possible to return the results of a stored procedure into either a CTE or temp table?
In other words, is it possible to do this:
with someCTE as (
exec someStoredProc
)
or this:
exec someStoredProc into #tempTable
???
I'm trying to fill a temp table whose columns are the same as another table plus it has one more column. The temp table's contents are those rows in the other table that meet a particular condition plus another column that is the name of the table that is the source for the rows being added.
Example: 'permTable' has col1 and col2. The data in these two rows plus the name of the table from which it came ('permTable' in this example) are to be added to #temp.
Data in permTable
col1 col2
11, 12
21, 22
Data in #temp after permTable's filtered contents have been added
TableName, col1 col2
permTable, 11, 12
permTable, 21, 22
What is the syntax for an insert like this?
I pulled some examples of using a subquery pivot to build a temp table, but cannot get it to work.
IF OBJECT_ID('tempdb..#Pyr') IS NOT NULL
DROP TABLE #Pyr
GO
SELECT
vst_int_id,
[4981] AS Primary_Ins,
[4978] AS Secondary_Ins,
[code]....
The problems I am having are with the integer data being used to create temp table fields. The bracketed numbers on line 7-10 give me an invalid column name error each. In the 'FOR', I get another error "Incorrect syntax near 'FOR'. Expecting '(', or '.'.". The first integer in the "IN" gives me an "Incorrect syntax near '[4981]'. Expecting '(' or SELECT". I will post the definitions from another effort below.
CREATE TABLE #Pyr
(
vst_int_idINTEGERNOT NULL,
--ivo_int_idINTEGERNOT NULL,
--cur_pln_int_idINTEGERNULL,
--pyr_seq_noINTEGERNULL,
[code]....
SQL Server 2008 R2.
I was wondering if there is a way to schedule the deletion of temporary tables that are over a certain age. Right now, temporary tables are being created, but unless I delete them manually, they end up building up and just taking up a lot of space.
View 5 Replies View Related
I'm very new to SQL but I have figured out how to do my first query. Now I would like to automate it to send the query as an attachment to users automatically (scheduler/cron??). How would you go about this, I need step by step hints. I'm using SQL Query Analyzer ver 8.00.2039 to generate the query from CDR records. Is this even possible?
Thank you for any guidance.
Below are my temp tables
--DROP TABLE #Base_Resource, #Resource, #Resource_Trans;
SELECT data.*
INTO #Base_Resource
FROM (
SELECT '11A','Samsung' UNION ALL
[Code] ....
I want to loop through the data from #Base_Resource and do the follwing logic.
1. get the Resourcekey from #Base_Resource and insert into #Resource table
2. Get the SCOPE_IDENTITY(),value and insert into to
#Resource_Trans table's column(StringId,value)
I am able to do this using while loop. Is there any way to avoid the while loop to make this work?
Hi,
I have follwing union query. I want to put this all in a temp table.
select Store_Id,batchnumber
From
Adjustments where updatedDt between '10/30/2007' and '11/20/2007' and Store_id in(8637 ,8641)
group by Store_Id, batchnumber
Union
select DestinationId,b.batchNumber
from
batch b
inner join Carton C on C.Carton_Id = b.General_ID
inner join Document d on d.Document_Id = c.Document_Id
where b.BatchType = 'Warehouse' and b.TranTable = 'Carton'
and (d.DestinationId in (8637 ,8641) ) and c.UpdatedDt Between '10/30/2007' and '11/20/2007'
Union
select d.DestinationId,b.Batchnumber
From
batch b
inner join Document d
on d.Document_Id = b.General_Id
where b.BatchType = 'TransferIn' and b.TranTable = 'Document'
and (d.DestinationId in (8637,8641) ) and d.UpdatedDt Between'10/30/2007' and '11/20/2007'
Union
select d.SourceId,b.batchNumber
From
batch b
inner join Document d
on d.Document_Id = b.General_Id
where b.BatchType = 'TransferOut' and b.TranTable = 'Document'
and (d.SourceId in (8637,8641) ) and d.UpdatedDt Between'10/30/2007' and '11/20/2007'
order by batchnumber
Kindly advice.
Thanks
Renu
Hi
I am having a table called as status ,in that table one field is there i.e. currentstatus.
the rows which are having currentstatus as "ticket closed",i want to move those rows into other table called repository which is having same table structure as status table.
I can do programatically.
but is there any way for every 3 months system has to check and do this action means moving to repository table automatically?
Please help me.
Thanks.
I think this is a very simple question, however, I don't know the
answer. What is the difference between a regular Temp table
and a Global Temp table? I need to create a temp table within
an sp that all users will use. I want the table recreated each
time someone accesses the sp, though, because some of the
same info may need to be inserted and I don't want any PK errors.
thanks!!
Toni Eibner
Hello friends,
I am new to the SQL Server 2005 development.
From last 1 week or so, i have been facing very strange problem with my sql server 2005s database
which is configured and set on the hosting web server. Right now for managing my sql server 2005 database,
i am using an web based Control Panel developed by my hosting company.
Problem i am facing is that, whenever i try to modify (i.e. add new columns) tables in the database,
it gives me error saying that,
"There is already an object named 'PK_xxx_Temp' in the database. Could not create constraint. See previous errors.
Source: .Net SqlClient Data Provider".
where xxx is the table name.
I have done quite a bit research on the problem and have also searched on the net for solution but still
the problem persist.
Thanks in advance. Any help will be appreciated.
In SQL Server 2000, I have a parent table with a cascade update to a child table. I want to add a record to the child table whenever I add a table to the parent table. Thanks
View 1 Replies View RelatedHi all,We recently upsized two Microsoft Access Databases to SQL. We'reusing an ADP (2002) as the front end.All the conversion issues have been resolved, except for one:Whenever we insert a record into a table, the table isn't sorted byprimary key like I would expect. Instead, the record can be found atthe end of the table. This makes finding a particular record(especially as time goes on) very difficult.I've tried eliminating all indexes except for the primary key, andalso writing AFTER INSERT triggers, but the table still does not sortcorrectly.Any suggestions would be greatly appreciated!Matt
View 4 Replies View Relatedi am inserting something into the temp table even without creating it before. But this does not give any compilation error. Only when I want to execute the stored procedure I get the error message that there is an invalid temp table. Should this not result in a compilation error rather during the execution time.?
--create the procedure and insert into the temp table without creating it.
--no compilation error.
CREATE PROC testTemp
AS
BEGIN
INSERT INTO #tmp(dt)
SELECT GETDATE()
END
only on calling the proc does this give an execution error
I don't know if it's a local issue but I can't use temp table or table variable in a PP query (so not in a stored procedure).
Environment: W7 enterprise desktop 32 + Office 2012 32 + PowerPivot 2012 32
Simple example:
declare @tTable(col1 int)
insert into @tTable(col1) values (1)
select * from @tTable
Works perfectly in SQL Server Management Studio and the database connection is OK to as I may generate PP table using complex (or simple) queries without difficulty.
But when trying to get this same result in a PP table I get an error, idem when replacing table variable by a temporary table.
Message: OLE DB or ODBC error. .... The current operation was cancelled because another operation the the transaction failed.
Hi thereApplication : Access v2K/SQL 2KJest : Using sproc to append records into SQL tableJest sproc :1.Can have more than 1 record - so using ';' to separate each linefrom each other.2.Example of data'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;3.Problem - gets to lineBEGIN TRAN <---------- skipsrestINSERT INTO timesheet.dbo.table14.Checked permissions for table + sproc - okWhat am I doing wrong ?Any comments most helpful......CREATE PROCEDURE [dbo].[procTimesheetInsert_Testing](@TimesheetDetails varchar(5000) = NULL,@RetCode int = NULL OUTPUT,@RetMsg varchar(100) = NULL OUTPUT,@TimesheetID int = NULL OUTPUT)WITH RECOMPILEASSET NOCOUNT ONDECLARE @SQLBase varchar(8000), @SQLBase1 varchar(8000)DECLARE @SQLComplete varchar(8000) ,@SQLComplete1 varchar(8000)DECLARE @TimesheetCount int, @TimesheetCount1 intDECLARE @TS_LastEdit smalldatetimeDECLARE @Last_Editby smalldatetimeDECLARE @User_Confirm bitDECLARE @User_Confirm_Date smalldatetimeDECLARE @DetailCount intDECLARE @Error int/* Validate input parameters. Assume success. */SELECT @RetCode = 1, @RetMsg = ''IF @TimesheetDetails IS NULLSELECT @RetCode = 0,@RetMsg = @RetMsg +'Timesheet line item(s) required.' + CHAR(13) + CHAR(10)/* Create a temp table parse out each Timesheet detail from inputparameter string,count number of detail records and create SQL statement toinsert detail records into the temp table. */CREATE TABLE #tmpTimesheetDetails(RE_Code varchar(50),PR_Code varchar(50),AC_Code varchar(50),WE_Date smalldatetime,SAT REAL DEFAULT 0,SUN REAL DEFAULT 0,MON REAL DEFAULT 0,TUE REAL DEFAULT 0,WED REAL DEFAULT 0,THU REAL DEFAULT 0,FRI REAL DEFAULT 0,Notes varchar(255),General varchar(50),PO_Number REAL,WWL_Number REAL,CN_Number REAL)SELECT @SQLBase ='INSERT INTO#tmpTimesheetDetails(RE_Code,PR_Code,AC_Code,WE_Da te,SAT,SUN,MON,TUE,WED,THU,FRI,Notes,General,PO_Nu mber,WWL_Number,CN_Number)VALUES ( 'SELECT @TimesheetCount=0WHILE LEN( @TimesheetDetails) > 1BEGINSELECT @SQLComplete = @SQLBase + LEFT( @TimesheetDetails,Charindex(';', @TimesheetDetails) -1) + ')'EXEC(@SQLComplete)SELECT @TimesheetCount = @TimesheetCount + 1SELECT @TimesheetDetails = RIGHT( @TimesheetDetails, Len(@TimesheetDetails)-Charindex(';', @TimesheetDetails))ENDIF (SELECT Count(*) FROM #tmpTimesheetDetails) <> @TimesheetCountSELECT @RetCode = 0, @RetMsg = @RetMsg + 'Timesheet Detailscouldn''t be saved.' + CHAR(13) + CHAR(10)-- If validation failed, exit procIF @RetCode = 0RETURN-- If validation ok, continueSELECT @RetMsg = @RetMsg + 'Timesheet Details ok.' + CHAR(13) +CHAR(10)/* RETURN*/-- Start transaction by inserting into Timesheet tableBEGIN TRANINSERT INTO timesheet.dbo.table1select RE_Code,PR_Code,AC_Code,WE_Date,SAT,SUN,MON,TUE,WE D,THU,FRI,Notes,General,PO_Number,WWL_Number,CN_Nu mberFROM #tmpTimesheetDetails-- Check if insert succeeded. If so, get ID.IF @@ROWCOUNT = 1SELECT @TimesheetID = @@IDENTITYELSESELECT @TimesheetID = 0,@RetCode = 0,@RetMsg = 'Insertion of new Timesheet failed.'-- If order is not inserted, rollback and exitIF @RetCode = 0BEGINROLLBACK TRAN-- RETURNEND--RETURNSELECT @Error =@@errorprint ''print "The value of @error is " + convert (varchar, @error)returnGO
View 2 Replies View RelatedIf on the source I have a new column, the script generated by SqlPackage.exe recreates the table on the background with moving the data into a temp storage. If the table is big, such approach can cause issues.
Example of the script is below: in the source project I added columns [MyColumn_LINE_1] and [MyColumn_LINE_5].
Is there any way I can make it generating an alter statement instead?
BEGIN TRANSACTION;
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
SET XACT_ABORT ON;
CREATE TABLE [dbo].[tmp_ms_xx_MyTable] (
[MyColumn_TYPE_CODE] CHAR (3) NOT NULL,
[Code] ....
The same script is generated regardless the table having data or not, having a clustered or nonclustered PK.
I have a temp table like this
CREATE TABLE #Temp
(
ID int,
Source varchar(50),
Date datetime,
CID varchar(50),
Segments int,
Air_Date datetime,
[code]....
Getting Error
Msg 102, Level 15, State 1, Procedure PublishToDestination, Line 34 Incorrect syntax near 'd'.
Hello,
I am receiving the following error:
Column name or number of supplied values does not match table definition
I am trying to insert values into a temp table, using values from the table I copied the structure from, like this:
SELECT TOP 1 * INTO #tbl_User_Temp FROM tbl_User
TRUNCATE TABLE #tbl_User_Temp
INSERT INTO #tbl_User_Temp EXECUTE UserPersist_GetUserByCriteria @Gender = 'Male', @Culture = 'en-GB'
The SP UserPersist_GetByCriteria does a
"SELECT * FROM tbl_User WHERE gender = @Gender AND culture = @Culture",
so why am I receiving this error when both tables have the same
structure?
The error is being reported as coming from UserPersist_GetByCriteria on the "SELECT * FROM tbl_User" line.
Thanks,
Greg.
Below is my table structure. And I am inserting data from other temp table.
CREATE TABLE #revf (
[Cusip] [VARCHAR](50) NULL, [sponfID] [VARCHAR](max) NULL, GroupSeries [VARCHAR](max) NULL, [tran] [VARCHAR](max) NULL, [AddDate] [VARCHAR](max) NULL, [SetDate] [VARCHAR](max) NULL, [PoolNumber] [VARCHAR](max) NULL, [Aggregate] [VARCHAR](max) NULL, [Price] [VARCHAR](max) NULL, [NetAmount] [VARCHAR](max) NULL,
[Code] ....
Now in a next step I am deleting the records from #revf table. Please see the delete code below
DELETE
FROM #revf
WHERE fi_gnmaid IN (
SELECT DISTINCT r2.fi_gnmaid
FROM #revf r1, #revf r2
[Code] ...
I don't want to create this #rev table so that i can avoid the delete statement. But data should not affect. Can i rewrite the above as below:
SELECT [Cusip], [sponfID], GroupSeries, [tran], [AddDate], [SetDate], [PoolNumber], [Aggregate], [Price], [NetAmount], [Interest],
[Coupon], [TradeDate], [ReversalDate], [Description], [ImportDate], MAX([fi_gnmaid]) AS Fi_GNMAID, accounttype, [IgnoreFlag], [IgnoreReason], IncludeReversals, DatasetID, [DeloitteTaxComments], [ReconciliationID],
[Code] ....
If my above statement is wrong . Where i can improve here? And actually i am getting 4 rows difference.
Hello
Is it possible to insert data into a temp table with data returned from a stored procedure joined with data from another table?
insert #MyTempTable
exec [dbo].[MyStoredProcedure] @Par1, @Par2, @Par3
JOIN dbo.OtherTable...
I'm missing something before the JOIN command. The temp table needs to know which fields need be updated.
I just can't figure it out
Many Thanks!
Worf
In a table-valued UDF, does the UDF use a table variable or a temp table to form the resultset returned?
Hello guys..
Can u plz help me by giving me an idea how i can copy the temp table data to permanent table
Thanks,
sohails
Hi!
What is the difference in performance if I use a Temp-table or a local-table variable in a storedprocedure?
Why?
//Daniel
I want to insert the data from temp table to other table. Only condition is, it needs to sorted based on tool number and tool date. For example if we have ten records for tool number 1000, it should be order by tool number and then based on tool_dt. Both tables doesn't have any primary keys. Please find below my code. I removed all the unnecessary columns for simple understanding. INSERT INTO tool_summary (tool_nbr, tool_dt) select tool_nbr, tool_dt from #tool order by tool_nbr, tool_dt...But this query is not working as expected. Data is getting shuffled.
Actual Data
Expected Result
1000
1-Aug
1000
1-Feb
1000
1-Jul
1000
[code]....
WE have a job that loads data from an Oralce DB into our SQL Server 2000 DB twice a day. The schedule has just changed so that now there is a possibility of having my west coast users impacted when it runs at 5 PM PST and my east coast users impacted when it runs at 7 AM EST. As a workaround, I have developed a DTS package that loads the data into temp tables instead of the real tables. IE. Oracle -> XTable_temp instead of Oracle -> XTable. The load sometimes takes about an hour to an hour and a half to load, so this solution works great, but I want to then lock the table, delete it and rename the temp table to table X. The pseudo code would be:
Begin Transaction
Lock Table XTable
Drop XTable
Alter Table XTable_temp rename to XTable
Release Lock XTable
End Transaction
Create XTable_temp
I see two issues with this solution. 1) I think if I can lock XTable that the lock would be released when the table is dropped and the XTable_temp was being renamed. 2) I can't find a command to rename a table.
Any ideas on a process that might help?
TIA,
A
I want to pass the 'inserted' table from a trigger into an SP, I think I need to do this by dumping inserted table into a temporary table and passing the temp table. However, I need to do this for many tables, and don't want to list all the column names for each table/trigger (maintenance nightmare).
Can I dump the 'inserted' table to a temp table WITHOUT specifying the column names?
I need to perform this task. say I have a table that the columns are dates.
Table months:
[02-2015],[03-2015], [04-2015],[04-2015]....[02-2016].
When the new month comes I want the table to alter the columns automatically instead of manual how we do it now. The new Month table should delete [02-2015] and replace it with [03-2015].
table months:
[03-2015],[04-2015],[05-2015],[06-2015]....[03-2016].