When I drag a GridView from the toolbox onto a Webform, and then configure its DataSource is a true DataSet created that I can access in the code behind? When my results return I want to be able to access individual rows and cells, taking their values, assiging them to variables and then using the newly equated variable to perform calculations.
Thank you,
Hi,
I am using SQL Server 2005, trying to drag and drop a sql-query but it is not possible. This was possible before, what might be the cause?
Now, I have to open file, browse to the query and then it works but that is very time consuming. Would appreciate any suggestion.
Hi,
In SSRS do I able to drag and drop the columns in the report (Internet Explorer) so that after drag and drop the report refreshes with the changes as we made?
Is there any way that I can drag and drop rows in SQL Server Studio Management Express? Every time I open a table, I want to move a row by just dragging and dropping but it can't be done.
View 3 Replies View RelatedReally not sure what is going on. I drag and drop the SQLDataSource to my website. At that point I can see the properties of it, but there is no graphical box on my website. Therefore I can no longer make any changes to the controller once I drag it on the website. I did create a brand new website with nothing on it, drag and dropped and still nothing appears. Any assistance would be great.
View 6 Replies View RelatedI've submitted a bug report for this, but I also want to be sure it's not my own installation.
In the solution explorer, when I drag a package (usually accidentally) to another spot in the list, it disappears from the list. If I try to re-add the package, it thinks the original already exists, and names the second one with a "(1)" suffix. I can work around this by moving the original package out of the primary package folder and then re-adding it through solution explorer, but that's a touch cumbersome.
I don't really have a question here other than perhaps validation of the issue. Thanks.
Here's the bug report if others experience the same issue:
https://connect.microsoft.com/SQLServer/feedback/ViewFeedback.aspx?FeedbackID=258908
I created SSAS cube in VS 2008 and have been able to deploy it successfully to the server. While creating the cube I was able to browse dimensions and all underlying tables just to make sure it has data. After deploying successfully when I drag and drop any measure group to browser it does not display anything.
The only thing I did different from straightforward cube building process was that when I created those measure groups the partitions that were created by default were giving me some unknown errors so I had to delete them in order for cube to process successfully.
Did that made any difference because I thought partitions are for improving query performance and has nothing to do with cube processing errors.
Can we drag and drop Existing SSIS package into for each loop container ?
View 3 Replies View RelatedI have a question about loading data on the page lode event. The question is more conceptual then how to.
Using C#, I would like to make a call to a SQL 2000 Server, with the use of a stored procedure return one row with eleven fields. Then use the data to fill five different controls. There is no manipulation of the data it is just presented as information. With a DataReader and the GetValues method using the resultant array I can fill the controls (or can I), or with a DataSet and the Load method do the same thing. Now this code can be placed in the code behind page or it can be implemented in a class. This is the only page that uses this combination of fields and controls; however I would think a more generic call to the data could be made then pick and chose the fields as needed. What process makes the most sense? Is what I just described even possible (as yet I haven’t tried it)?
As always thanks in advance for any thoughts, comments, and suggestions.
Hi,
i want to create dynamic controls using wpf and c#.
can any body send me some code snippet.
for example:-
one of my window page have 100s of fields like textbox, checkbox and date controls in a group inside different grid and panel.
now if admin has made that amoung 100 fields user should be able to see only 20 or 30 fields.
how will i do so, just making the fileds invisible won't work, coz all the fields should be visible from top of the form,
means i want to push all the visible fields at the top.
what are the best way to do so.
need it urgent
thanx a lot
Hi, I am porting a massive VB6 project to ASP.net 2005. Most of the code is fine, however because the original developers used lots of data controls and my own time restrictions I thought to replicate the functionality by using Sqldatasource controls instead.
These data controls are bound to DBtruegrids. The project has has lots of code like...
AdodcOrders.Recordset.RecordCount > 0 or If AdodcOrders.Recordset.EOF or AdodcOrders.Recordset.MoveNext() or
AdodcDetail.Recordset!FieldName
The problem is the sqldatasource control doesn't have a recordset/dataset property which I can access and manipulate, or does it? What should I do to get round these? The project has thousands of lines like this in so its not feasible to rewrite it (although if I could I would!).
Any suggestions please gratefully appreciated.
many thanks
mike
In ssrs, I want to create an expression for the row visibility. But, the expression will contain 2 conditions from different 2 datasets (DealStarts & RowofTrendingVisibility). I have applied a solution from online, but got an error message is
"The Visibility.Hidden expression for the tablix ‘Tablix9’ contains an error: [BC30451] Name 'launchdate' is not declared. "
I think that there is a minor issue in my syntax.
=iif ((Last(MonthName("DealStarts"))=monthname(month(today())) or launchdate ("RowofTrendingVisibility")<Parameters!StartDate.Value),true, false)
I have a store procedure in MC400 which I can call from SSMS using the below command:
EXEC ('CALL GETENROLLMENT() ')At serverName
Now this command returns two data sets like:
HA HB HC HD HE
1112
112571ABC14
113574ABC16
114577ABC87
DADBDCDD
1115566VG02
1115566VG02
1115566VG02
I want to generate two different XML files from these two datasets.Is there any way this can be achieved in SSIS or t-sql ?
I want to update two tables in one page. So I created two FormView bound on two SqlDataSource controls, and I create a Update button on the bottom of page. And I writen some codes as below:
btnUpate_Click(object sender, EventArgs e){
sqlDataSource1.Update();
sqlDateSource2.Update();}
But, the records haven't updated.
In SqlDataSource2_Updating() function, I found all the parameters is null.
So, how to modify my code to do it.
Zhang
Hi
I am wana to know why we every time drop the procedure and again create it as below...will that impact on performance or compilation of SP???
Use Northwind
GO
IF OBJECT_ID('dbo.ListCustomersByCity') IS NOT NULL
DROP PROC dbo.ListCustomersByCity
GO
CREATE PROCEDURE dbo.ListCustomersByCity @Country nvarchar(30)='%'
AS
SELECT City, COUNT(*) AS NumberOfCustomers
FROM Customers
WHERE Country LIKE @Country
GROUP BY City
GO
T.I.A
What kind of problems may I see if a process drop and re-create a set of tables every night?
Hello,
What's the command for dropping an existing Foreign key on a table and reacreating it in SQL Server 6.5
Thanks
Sri
Hi,
I had a question and did not obtain an answer. So I am trying to rephrase and ask again, in case I was not clear the first time.
When we drop and recreate a table, do we always have to recompile the stored procedures that reference the table? Or is only under certain scenarios that we need to do so- like if an index on the table is changed
Please let me know
Thanks in advance
Kiran
I have to run a Big Sproc for make a lot of updates and insert. because trigger it take to many time.
I can drop the trigger before the procedure and recreate it after, but I wondered whether there existed of other solution?
Can I deactive the trigger? I'm affraid too got two copie of code for the trigger that why I dont really like the Drop-Create solution...
Thanks
Hi all,
I have 2 questions:
1. How can I drop /remove a complete db from MSDE desktop engine?
2. After exporting my db onto MSDE server and get connected those db tables in FE (adp), how can I create a new table in the same back end db?
I know these are basic questions but since I am new to MSDE I hope the forum would bear me.
With kind regards,
Ashfaque
Hi,
How can i create and drop table in MS SQL Server 2000 via VB6? I think I should use ADOX object, but I don't know exactly how....
The following code uses ADO connection object and returns with runtime error "incorrect syntax near AS":
Dim db as ADODB.Connection
'... open connection to database
Dim strCmd As String
strCmd = "CREATE TABLE tmp_tbl AS SELECT * FROM tbl"
db.Execute strCmd
Thank you in advance
Hi, all,
I want to re-create an index on a production table.
I got an error 644 "could not find index entry...".
The DBCC CHECKDB and CHECKTABLE gave me this:
Server: Msg 8928, Level 16, State 1, Line 1
Object ID 37575172, index ID 6: Page (1:939782) could not be processed. See other errors for details.
Server: Msg 8939, Level 16, State 1, Line 1
Table error: Object ID 37575172, index ID 6, page (1:939782). Test (*(((int*) &m_reservedB) + i) == 0) failed. Values are 7 and 36.
DBCC results for 'Mfg_DFSFNSF'.
There are 1142314 rows in 326143 pages for object 'Mfg_DFSFNSF'.
CHECKTABLE found 0 allocation errors and 2 consistency errors in table 'Mfg_DFSFNSF' (object ID 37575172).
The table script for the index is like this:
CREATE UNIQUE INDEX [Mfg_ITMDH_MbrIdx] ON [dbo].[Mfg_DFSFNSF]([_ITMDH_OwnRow], [_ITMDH_MbrKey], [RECTYPE]) WITH FILLFACTOR = 70 ON [PRIMARY]
My question is that can I drop it and run above create it to fix the problem in live mode?
I know the other option will be:
DBCC CHECKTABLE (FSDBMR.dbo.Mfg_DFSFNSF, repair_allow_data_loss)
But that has to put the db under single user mode.
Thanks!
Hi What is the SQL syntax to create and destroy a stored proceedure with t-sql? Is there any good tutorials?ThanksPWP
View 5 Replies View RelatedIf I rebuild the clustered index using this option (Drop Existing) without specifying the Fill Factor, would it it retain the original Fill Factor?
Thank you
How to SQL server save information about create/drop objects action. How can I get this? Example for, a lot of objects(sp) in my database has been dropped, how I know who was dropped them (user login & time)?
View 1 Replies View RelatedHi All,
I am Srinivas working on SSAS 2005. I am not able to create or drop dimension members. I need to drop and create all members in one dimension before cube processing, as the columns are coming dynamically.
E.g. ALTER CUBE [Reporting] DROP DIMENSION MEMBER [Tbl Analysis Test].[Name]
Here cube is [Reporting] , dimension is [Tbl Analysis Test] and member is [Name].
Its giving the following error " Parsing the query ... Query (1, 46) The member '[Name]' was not found in the cube when the string, [Tbl Analysis Test].[Name], was parsed. Parsing complete"
Please look into this issue, advice me what do I do ASAP.
Thanks,
Srinivas
Thought I should post in the newbie forum for a while, instead. :-)
I have a couple of scripts that I've generated that drop a couple of system stored procedures and recreate them. I'm not sure why I did it in the first place, but I think it was that it wouldn't let me run an ALTER statement on them. Specifically, I'm now looking at sp_add_operator. I changed it to a 500 character email field instead of whatever it was (100, I think.)
/* Explanation: Why did I do that? SQL Mail is prohibited here, so I'm using CDO_Sysmail to email myself and the developers if a job fails. The list of people to email is determined by the owner of the database, who is also an operator in SQL. I get the list of emails from the email field of the operator properties. Hence, I need a bigger email field. Yes, I now know it would most likely be better to create an ADMIN database on each server for this kind of stuff. (Thanks to Tara for that blogged suggestion.) */
While I will probably go back to the default stored procedure, this got me to thinking: when would it be better to use an ALTER statement on a SProc rather than to do a DROP and CREATE?
Your thoughts, oh SQL gurus?
Hi,
I increased one of my base tables column which is referenced in view
I noticed sql server didn't recognized this change and its still showing old field size in the view.
I can simply drop and create it again. But wanted to know if there is any way (command/sp) to recompile the view which will be easy to deploy in production as patch.
Thanks
- D
Hi All,
I am Srinivas working on SSAS 2005. I am not able to create or drop dimension members. I need to drop and create all members in one dimension before cube processing, as the columns are coming dynamically.
E.g. ALTER CUBE [Reporting] DROP DIMENSION MEMBER [Tbl Analysis Test].[Name]
Here cube is [Reporting] , dimension is [Tbl Analysis Test] and member is [Name].
Its giving the following error " Parsing the query ... Query (1, 46) The member '[Name]' was not found in the cube when the string, [Tbl Analysis Test].[Name], was parsed. Parsing complete"
Please look into this issue, advice me what do I do ASAP.
Thanks,
Srinivas
I have a package that i want to move between enviroments. Therefor i need to create a package that creates all my tables on the new server.
like
-- "if exists (select * from dbo.sysobjects where id = object_id(N'[table]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [table]
GO"
The case is that i have around 30 tables, and my question is therefore
I know that you can create the drop and create script for one table at the time in the SQL Server Management Studio, but is there an easier way to do this
Greetings
I am thinking of creating a script that generates another script for creating/dropping tables, indeces, FK, views, stored procedures..etc in the right order in a specific database. I accept the fact this script is dangerous (like if I ran it on production server). But it sure will be very helpful when moving our SQL objects from development to qa and then to production. Is this worth it? Haev you see anything that generates such a thing?
Thanks
Greetings
I was directed to post this here. I am thinking of creating a script that generates another script for creating/dropping tables, indeces, FK, views, stored procedures..etc in the correct sequence in a specific database. I accept the fact this script is dangerous (like if I ran it on production server). But it sure will be very helpful when moving our SQL objects from development to qa and then to production. Is this worth it? Have you see anything that generates such a thing using sys.objects,sys.indexes,sys.foreign_keys etc?
Thanks
what are the minimum permissions to allow a user to view, create, & drop tables within a DB (SQL 2008)?
View 4 Replies View Related