Document Map Pane Refreshing ENTIRE Page!

Jul 10, 2006

I am using the ReportViewer control with SRS2005. I have an extremely large report (243 pages) - however. It takes an extremely long time to load the report as well as populate the document map pane.

When one clicks a link in the document map pane, it refreshes the entire page - and thus causes the report to take another 2-3min to repopulate the document map.

However, if I were to access the Report Server directly, clicking a link only causes the main content page to be refreshed.

This is a substantial difference between selectively refreshing as opposed to refreshing the ENTIRE page and hence taking 2-3min between links.

I am defining the report as:

<rsweb:ReportViewer ID="rvMain" runat="server" AsyncRendering="true" ProcessingMode="Remote" ShowParameterPrompts="False" OnPageNavigation="rvMain_PageNavigation" Width="100%" Height="800px" DocumentMapCollapsed="False" DocumentMapWidth="300px">
</rsweb:ReportViewer>

View 1 Replies


ADVERTISEMENT

Loosing Connection Upon Refreshing Page

May 31, 2005

Hi,

I'm getting a connection and then loosing my connection upon refreshing the browser with this script connecting to MSSQL using php, when trying the following:


PHP Code:




 $connection = mssql_connect("127.0.0.1","test","") or 
die("Could not connect mssql db on " .$config['dbhost']);
        
mssql_select_db("dbName") or
die("Could not select database " ."dbName"); 






Are their other ways to see more error handling in connecting to MSSQL

View 1 Replies View Related

ReportViewer Control - Page Navigation Not Refreshing

Jan 17, 2008

I am using a ReportViewer Control inside of a Windows Form and ran into an issue with the page navigation failing to update upon refresh (the report itself does refresh - the page navigation does not). If the initial report has one page and the subsequent refresh produces five pages, the page navigation window only shows one page. If you manually type in page two or three, nothing happens.

Here is a code snippet:


private void adpTaxServicesForm_Load(object sender, EventArgs e)

{

this.reportViewer.RefreshReport();

}



private void button1_Click(object sender, EventArgs e)

{

this.reportViewer.SuspendLayout();



this.reportViewer1.RefreshReport();

this.reportViewer.ResumeLayout();
}


Any help would be greatly appreciated...

Thanks,

-Fernando

View 1 Replies View Related

Entire Table In A Page

Mar 13, 2008

How can I do in order that a table show all its rows in a page?And if the table can only show a number of rows cause arrive to the end of the page show the table in the next page?

Thanks!

View 5 Replies View Related

SQL 2005 Reporting Service - DTD Is Prohibited In This XML Document On ASPX Page

Jan 8, 2007

I have aspx page which uses Reportviewer object to execute/display reporting services report on the page based on the parameters passed by the aspx page.

It works fine. I have a problem when I try to use import option on that page. It throws the following error. Can anybody help me to resolve this issue?

Advanct thanks for your help and support

Thanks,

Sundar

Here is the error message when I export the report to any format (Excel, pdf, csv or text)
For security reasons DTD is prohibited in this XML document. To enable DTD processing set the ProhibitDtd property on XmlReaderSettings to false and pass the settings into XmlReader.Create method.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Xml.XmlException: For security reasons DTD is prohibited in this XML document. To enable DTD processing set the ProhibitDtd property on XmlReaderSettings to false and pass the settings into XmlReader.Create method.

Here is the code:
ASPX Code:
<rsweb:ReportViewer ID="ReportViewer1" runat="server" Font-Names="Verdana" Font-Size="8pt" Height="100%" ProcessingMode="Remote" Width="100%" ShowFindControls="false" ShowPageNavigationControls="true" ShowPromptAreaButton="false" AsyncRendering="false" EnableViewState="true" ShowParameterPrompts="false" Visible="false">
<ServerReport ReportServerUrl="http://miscsql1/ReportServer" ReportPath="/webreports/POS Commission Report"></ServerReport>
</rsweb:ReportViewer>

ASPX.VB Code
Dim RptParameters(2) As Microsoft.Reporting.WebForms.ReportParameter
RptParameters(0) = New Microsoft.Reporting.WebForms.ReportParameter("Repcode", objCommon.RepSite.ToString, False)
RptParameters(1) = New Microsoft.Reporting.WebForms.ReportParameter("StartDate", txtStartDate.Text.ToString)
RptParameters(2) = New Microsoft.Reporting.WebForms.ReportParameter("EndDate", txtEndDate.Text.ToString)
ReportViewer1.ServerReport.SetParameters(RptParameters)
ReportViewer1.ServerReport.Refresh()
ReportViewer1.Visible = True
objCommon = Nothing

View 5 Replies View Related

Two Different Addresses In The Navigation Pane?

Sep 14, 2007

I have a report with a Matrix table. When it€™s fully populated I have 5 rows. These rows are different categories in a CRM system. In these categories there are a lot of Opportunities listed. The thing here is that category 1-4 exist in one table, really a view, and category 5 exist in another different view. So to gather all the information into one single Matrix table to later have subtotals and stuff I just made a little Union of the two select queries.

Now one the column in the table is of course Topic. And from here my client wants to be linked to the right CRM card. The problem I have encountered is that how can I have to different addresses on one single cell in the table?

In the Navigation pane in the cell that corresponds to the Topic, for now I have an address like this:
=string.Format("http://{0}/SFA/opps/edit.aspx?id={1}", Parameters!srv.Value, Fields!objectid.Value)

What I need to change when it€™s a category 5 Opportunity is €œopps€? to €œcat5€?and add €œ&etc=10008€? to the end of the address. Any ideas?

PS. {0} and {1} are parameters, one server parameter and one opportunity ID parameter.

Kind Regards

View 3 Replies View Related

Can't See All Tables In Entities Pane

Dec 22, 2006

Why is it that only SOME of the tables in my database show up in the Entities pane?

There are a total of six tables in my database, yet only three of them are available to me in the Entities pane. I have looked at permissions, etc, and I am using the SA account. It seems like I should see either ALL or NONE of the tables, but that is not the case.

What am I missing?

View 1 Replies View Related

Unable To Edit Row In Results Pane

Jun 11, 2007

When I change some data in a row in my Results Pane and hit enter, I receive a message that "Data has changed since the Results pane was last retrieved." I click the yes button to "commit your changes to the database anyway," but then I get an error message telling me that my row was not updated. The message says "Error Message: The updated row has changed or been deleted since data was last retrieved. Correct the errors and retry or press ESC to cancel the change(s)." This time, the only option I have is to click the OK button. Can anyone give me some idea as to what I need to do to be able to update the row data in this way? Thanks.

View 11 Replies View Related

Grid Pane In The Table In Enterprise Manager

Jan 13, 2004

HI
When you right click open table to return all rows, click on the "Show/Hide Grid pane" icon . When you click on any row the first column called "Column" a dropdown shows all the filed names of that particular table.
This feature used to work fine untill recently wherein when I click on the column, I don't get to see all the filed names but now it just shows TableName.* i.e. all columns.
This is the case when I try to create a view in enterprise manager also. When you add a table to create a view, I cannot see all the filed names . I'm not sure what to do , to get the field names to appear? Is it some kind of setting in enterprise manager.
All the info would be appreciated.
Ta
N

View 2 Replies View Related

2005 Management Studio Results Pane

Feb 8, 2007

Is there any way to have the results pane auto hide ? Im lazy and dont want to manually (ctl-R) hide each time i run something, then starting writing code again

View 1 Replies View Related

Report Builder, Getting Started Pane: OK Greyed Out

Sep 26, 2007



Hi all,

I'm working on a new SSRS implementation, and have created a Report Model against an SSAS database. I launced Report Builder and can see and select the model in the list, but the OK button at the bottom of the pane is greyed out so I'm unable to actually start building a report against it. Any ideas on what I need to change to make the button work? I have already verified that I have full access to the data source as well as the model, in addition to the underlying SSAS DB, so I don't believe it is a permissions issue... But I'm certainly open to any suggestions.


Thanks!

View 3 Replies View Related

Filters &&amp; Parameters Pane Missing In MDX Query Designer

Mar 13, 2007

I'm developing my first Analysis Server report in SRS. Everything was going well when I discovered the filters & parameters pane was missing in the MDX Query Designer in data mode. I have my columns and rows but need to drag a dimension into the filters & parameters pane in MDX Query Designer and set a filter and parameter on it. Any idea how to make it viewable?

View 1 Replies View Related

No Parameter Pane When Reporting In 2005 Against A 2000 AS Cube

Sep 26, 2007

I have this strange issue.

VS2005
SSRS2005
SSAS2000 cube based on data from SQL 2005 database

When i connect to the SSAS cube and create a dataset in a SSRS 2005 report i do not get a parameter pane.
Also, if i right click on a dimension & select "Add to filter" i get the following error message

"Object reference not set to an instance of an object"

It's not my installation of SQL 2005, as I can connect to an SSAS2005 cube and get the filter/parameter pane and do not get the error message. Parameters work fine.

Have i come across a known issue when reporting on SQL 2005 versus a SQL 2000 AS Cube... or can someone shed some light on the issue for me....

If someone can tell me how to display screenshots I can add them to a post

Thanks

Will

View 3 Replies View Related

View Diagram Pane - How Save Layout After I Change It? 2000

Jul 23, 2005

Hello --Is there a way to configure 2000 so it will save a view layout after Ichange it in the diagram pane?Thanks for any help.Larry Mehl

View 2 Replies View Related

VS Built-in Query Builder - Not Possible To Save Diagram Pane Content

Feb 18, 2008

I have VS2008 Express and I am using Sql Server Compact Edition 3.5 which is distributed with it.

As I experienced, there is no possibility to use this database from Sql Server Management Studio (because it is version 3.5 and Management Studio demands version 3.1).

So, the only possibility to design a query is to use the built in Query Builder in Visual Studio Express. This query builder does not save the Diagram Pane content layout. I mean, when a query has 10 tables, I place these tables in the Diagram Pane in some order that makes sense (e.g. to make all relations visible). After saving and reopening the query in Query Builder, all tables are on the left side, in a complete disorder.

Is it possible to somehow save the Diagram Pane content along with the SQL ??

View 1 Replies View Related

Reporting Services :: All Record Are Displaying On One Page - How To Display Page By Page

Nov 11, 2015

I have created one reports but all the records are displaying on one page.find a solution to display the records page by page. I created the same report without group so the records are displaying in page by page.

View 3 Replies View Related

SQL Enterprise Manager Version 8.0 Up-DO YOU WANT TO PROLONG YOUR WORK WITH THE RESULTS PANE AND CONTINUE TO CONSUME RESOURCES

Apr 23, 2007

After opening the Results Pane (though a query or open table); I frequently get the below message.



Is there any way to change the settings so the results pane will stay active for a long length of time?



Message



SQL Server Enterprise Manager

_______________________



Some time ago, you retrieved data from the database with the query or view whose name is XXXX. The returned rows appear in the Results Pane and the database continues to retain the result set in its local memory; which consumes valuable server resources. Because you have not recently used the Results pane, it will be AUTOMATICALLY CLEARED IN ONE MINUTE. The will empty the results pane, discard unsaved changes, and free resources on the database server. Then if you want to REESTABLISH the result set, you can rerun the query or view.



DO YOU WANT TO PROLONG YOUR WORK WITH THE RESULTS PANE AND CONTINUE TO CONSUME RESOURCES ON THE DATABASE SERVER?

--------------------------------------------------------------------

I want this to default to Yes, without this message comming up and if I don't click yes fast enough, my results are gone. I kinow the work arounds, but how can I default this to Yes or so this message stops displaying.



Thank you



watxnd@hotmail.com





View 1 Replies View Related

Linked Server Oracle Tables - Not Able To Add To Query Designers Show Diagram Pane Via Add Table Dialogue

Apr 18, 2008

I am new to sqlserver.


1)I created a linked server to a oracle database, works fine. Now I am writing queries, using "Query Desgner", when I do a "Add table" linked server tables do not appear. Is this a limitation. I can get around the problem by creating a view.

2) When I use "Microsoft OLE DB Provider for Oracle" for linked server, some times connection seems to get lost. On one occassion, the next day it was fine, it re-established itself.

Any ideas thnx.

View 5 Replies View Related

Refreshing Test Dbs

Oct 14, 2002

I need to refresh a test db that is running on the same instance as the prod db. Should I just use DTS or is there a better way?

View 3 Replies View Related

Parameter Isn't Refreshing

Jan 25, 2007

Hi.
I have a datasource that depend on parameter A.
Parameter A get his values from query and have a defualt value.
Parameter B get his default value from query that depend on parameter A.

Now, whan I run the report, parameter A get a value and then parameter B get his value and the
datasource run OK.

But the problem is that when I'm changing the A value (from the value list) - The datasource run fine but Parameter B stay with the old value with out any change.

Does any one know how to solve it.
I'll be happy to give more explanation if it isn't clear enough.

Thanks.

View 5 Replies View Related

Automatic Refreshing

May 9, 2007

I am wondering if it is possible to have a report generated by RS refresh periodically automatically. This could be realized by inserting a few lines of JavaScript to the report including the reload() function, but I do not know if there is anyway to do such thing.



Thanks in advance for any tip!

View 5 Replies View Related

Refreshing Data In GridView

Sep 18, 2006

Hi,I’m new to SQL Express, but I have created a table and a stored proc to populate it.I have dragged the table into a form so I can view the data in a GridView.I have added a button to add new rows to the table. All the above works fine, except when I hit add, the data gets added, but the GridView doesn’t update and show the new data.  Is there some code I can add to the add button that also refreshed the GridView? ThanksMike

View 2 Replies View Related

Report Continually Refreshing

Jul 19, 2007

Hi All,

I had an interesting problem come up today. I have a report that when you preview on vs or click view report on the report server, the report continually refreshes itself. I cannot see that I have written anything different in this report than any other report.



I saw one other append here on a continually refreshing report but that was linked to a document map and this report has not document map.



Has anyone seen this problem of a continually refreshing report?



It's not a big deal as I figure I will just have to write it from scratch again, but I am interested to see if I can stop it before I re-write it.



Thanks in Advance



Peter

View 3 Replies View Related

Refreshing Database Before Restart

Jun 8, 2007



i am running a game from a dedi box .. ms sql..

and every time i restart and put it back up ,,,,it rewinds the database

the only way i can prevent this is if i restart the server

wait a phew hours then put it back up ,,"which makes it the same way it was when i logged off"

i was told that sql database servers refresh every hour.

is there a way i can make it refresh before i restart it so then i can put the server straight back up





if i restart the server back up straight away it does a rewind for some reason.





tech ::

the server does a rewind because it wouldn't have saved the game so to speak - as in updated everyone's characters. So yes waiting is the only way as far as I know to save the game.

View 3 Replies View Related

Refreshing Data In The Cursor.

Nov 17, 2006



Hello everybody,

I wrote a stored procedure for SqlServer 2000 and i am using it for paging purpose.
The procedure is as follows :

set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[OLAP_PagedRows]
(
@SelectFields nVarchar(2000) =NULL,

@GroupByFields nvarchar(1000) =NULL,

@BaseTable varchar(100),

@KeyColumn nvarchar(200)=NULL ,

@JoinTables varchar(500) =NULL,

@ConditionalClause varchar(1000) =NULL,

@Pagesize int = 10,

@PageNumber int =1,

@SortExpression nvarchar(200)=NULL,

@SearchText nvarchar(200)=NULL

)

AS

BEGIN



DECLARE @SQLSTMT NVarchar(4000)

DECLARE @SQLSTMT1 NVarchar(4000)



SET @SQLSTMT1 = ''

--check whether page size is given null or not, if so set to default value

IF @Pagesize IS NULL OR @Pagesize = ''

BEGIN

SET @Pagesize =10

END

--check whether page number is given null or not, if so set to default value

IF @PageNumber IS NULL OR @PageNumber = ''

BEGIN

SET @PageNumber =1

END



--Start constructing the query --

SET @SQLSTMT = 'SELECT '

SET @SQLSTMT1 = 'DECLARE @CountValue INT SELECT @CountValue = count(*) From '+@BaseTable

SET @SQLSTMT = @SQLSTMT + @SelectFields + ' FROM '+@BaseTable

If @JoinTables Is Not Null

BEGIN

SET @SQLSTMT = @SQLSTMT + ' ' +@JoinTables

SET @SQLSTMT1 = @SQLSTMT1 + ' ' +@JoinTables

END

DECLARE @StmtWhereClause nvarchar(500)

SET @StmtWhereClause =''

--------------------- Get where conditional clause

If (@SearchText Is Not Null AND RTRIM(LTRIM(@SearchText))<>'')

BEGIN

SET @StmtWhereClause = @StmtWhereClause + ' WHERE ' + @SearchText

END





If @ConditionalClause Is Not Null AND RTRIM(LTRIM(@ConditionalClause))<>''

BEGIN

IF (@StmtWhereClause <> '')

BEGIN

SET @StmtWhereClause= @StmtWhereClause + 'AND ' +@ConditionalClause

END

ELSE

BEGIN

SET @StmtWhereClause = @StmtWhereClause + ' WHERE ' + @ConditionalClause

END

END



SET @SQLSTMT = @SQLSTMT + @StmtWhereClause

SET @SQLSTMT1 = @SQLSTMT1 + @StmtWhereClause

If @GroupByFields Is Not Null And RTRIM(LTRIM(@GroupByFields))<>''

BEGIN

SET @SQLSTMT = @SQLSTMT + ' Group By ' +@GroupByFields

SET @SQLSTMT1 = @SQLSTMT1 + ' Group By ' +@GroupByFields

END

IF @SortExpression Is Not Null AND RTRIM(LTRIM(@SortExpression))<>''

BEGIN

SET @SortExpression = LTRIM(RTRIM(' Order By '+ @SortExpression))

SET @SQLSTMT = @SQLSTMT +' '+ @SortExpression

SET @SQLSTMT1 = @SQLSTMT1 +' '+ @SortExpression

END

SET @SQLSTMT1= @SQLSTMT1+' SELECT @CountValue As MyRows '

--SELECT @SQLSTMT1

--SELECT @SQLSTMT

DECLARE @StartRow INT

SET @SQLSTMT = ' DECLARE temp_Cursor CURSOR SCROLL FOR '+@SQLSTMT

EXECUTE SP_EXECUTESQL @SQLSTMT

Open temp_Cursor

DECLARE @RowCount INT

SET @RowCount = 1

SET @startRow = (@PageSize * (@PageNumber-1))+@RowCount

--SELECT @startRow as 'Current Row'

WHILE @RowCount <= @PageSize

BEGIN

--Select @StartRow 'as @StartRow'

FETCH ABSOLUTE @startRow From temp_Cursor

SET @RowCount= @RowCount+1

SET @StartRow = @startRow + 1

END

deallocate temp_Cursor

EXECUTE SP_EXECUTESQL @SQLSTMT1



END

It is working fine but I have problem with this kind of paging. I need to load the whole data into the cursor and i have to fetch records. The problem is that my table's contains more than Half a million records in it. If I have to load each time this cursor it will be a very big problem on the server side.

Probably it may not be a best solution, but sqlserver 2000 cannot provide more help than this. If I use sub-query for this like using Top <Number> it adversly effecting the nature of the data retrieval.

One solution that I am thinking is Load cursor once and whenever some updations performed on those tables from which cursor is getting data should be automatically reflect the changes.

Is this possible? Please help me.

Regards

Andy Rogers









View 3 Replies View Related

Refreshing A Dataset In RS 2005

Feb 20, 2008



I have a report in RS that uses a cube as a data source. I made some changes to a cube in AS 2005 and I am not sure how I can refresh my existing datasets without deleting everything?


Any feedback is greatly appreciated.
Thanks!

View 4 Replies View Related

Problem With Reportviewer While Refreshing

May 8, 2007



Hai,



Im having a report.When i click on one item in Report it navigate to second Report.Here Second report acts as a Child report.Whne i click on refresh button it goes back parent report.Some times i get error



"
Failed to load viewstate. The control tree into which viewstate is being loaded must match the control tree that was used to save viewstate during the previous request. For example, when adding controls dynamically, the controls added during a post-back must match the type and position of the controls added during the initial request. "

Plz help its very imp.

With regards,
Mahender

View 3 Replies View Related

SQLDatasource && Schema Refreshing (with Parameters)

Apr 9, 2006

Hi,
I'm having serious issues trying to refresh a schema in a SQLDatasource.  It is hooked to a stored procedure that takes two varchar(39) parameters.   The default parameters in this case are '%'. Note I am working in the designer.
If I set it up as a stored proc, I can't even get the 'test query' to run in the builder.
If I set it up as a select statement, ala 'exec <procname> @p1, @p2', the 'test query' will run.
In neither case will hitting refresh schema work.  It returns 'Invalid length parameter passed to the substring function'
The stored proc is nothing special, simply returning a select based upon the parameters.
Thanks,
Nick H

View 2 Replies View Related

Automatically Refreshing OLAP Cubes...

Dec 14, 2000

Can someone tell me how you can automate the refresh of OLAP Cubes? I just inhereted a data warehouse running on SQL7 and the idea of having to go in and manually refresh the cubes everyday is, well... stupid. I can't believe that they've been doing this for a year. Unfortunately, I'm not familar enough with MSOLAP yet and I can't figure this out. Any tips?

View 2 Replies View Related

SQL 2012 :: SSRS Report Is Not Refreshing?

May 12, 2015

I have created an SSRS report, but the data does not refresh. I am using the SSRS Report Buidler to create reports and when I run the query in the dataset, the results return as expected. However, when I run the report itself, the dataset appears old.

View 6 Replies View Related

Refreshing SQL Connection From Access ADP File

May 21, 2008



Hi,
I have many buttons in Access ADP that trigger feeding a table with different data.
Let's call the table tempTable1. I have 600 buttons that feed the make table with all kinds of data:



Code SnippetSELECT * INTO tempTable1 From AnyDataSourceSPViewTable

. There is another menu bar button that only opens


tempTable1. The result for tempTable1 is always correct when you use Query Analyzer. However Access ADP recognizes the change in the table structure when the connection is refreshed. Is there is any way that we can automate the connection refresh procedure or an easier way to get the desired results?

Am using Access 2003 connected to SQL 2005 and trigering the events via VBA.

thank you,

View 3 Replies View Related

Data Is Not Refreshing On The Databse Server With 64 Bit

May 30, 2008



Hi,

Recently we upgraded the SQL sever from 32 bit box to 64 bit and we encounterd some weird results like data was not refreshing unless we manually does a manually refresh.

we just ran some migration scripts from another server to the new 64 bit server and script is correct only thing problem is with data refreshing.

Please send me the solution for the problem and let me is there any script that we can refresh the database using tsql command???

Thanks in Advance,
Shiva.

View 2 Replies View Related

Need To Create Package For Refreshing The Cubes

Apr 4, 2008



We have scenario where we need to create package for refreshing the cubes. Let me explain it breifly.

We are doing ETL process in different ETL tool (not SSIS) and once the process is done, we are inserting in a table where we have a column like date, Completed C as the status. Once we get this information i.e 'Completed C' status and date, we need to refresh the cube like as follows,

1. Previous day cube need to be refreshed daily once
2. Previous week cube need to be refreshed weekly once.
3. Previous month cube need to be refreshed monthly once.
4. Historical cube need to be refreshed daily once.

We have decided all these above operations needs to be done in SSIS. In this case what are the things to be done while creating a package.

1. What are the control flow items to create it in SSIS?
2. Is there any way to have pooling like every 10 minutes to check whether the table has 'Completed C' status and STOP EXECUTE this package?
3. Is there any way to check the date for Previous day cube, Previous week cube, Previous Month cube and Historical cube etc?


Thanks in advance,
Anand Rajagopal

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved