Does ExchangeServer Accept In SendMail Task?
Jun 20, 2007Does exchangeServer accept in SendMail task?
only SMTP?
who knows?
For internal mail server , it's only via exchange server.
ADVERTISEMENT
SendMail Task
Nov 3, 1999Hi
I'd like to access to a SendMail object with an ActiveXScript.
I access it by the Tasks property of the package object.
I can retrieve the name or the description but I cannot access to the specific properties of the SendMail object (fileAttachments, ccline, ...)
How can I do it ?
THanks
Sendmail Task &> Where User And Pwd ?
May 3, 2007hi,
at the end of my ssis package flow, i want to invoke a sendmail task.
now, when configuring the sendmail service, i see i can only enter the name of my smtpserver. however, i see the task fails, probably because a user and a password is missing (i have it, but don't see where to type it in the SSIS).
(i want to use the smtp server of my internet provider)
anyone can help?
Sendmail Task - How To Customize ?
May 15, 2007I have a sendmail task following a data flow task. How can I set "To" attribute on the sendmail task before running it ? for example, read a config table and detemrine who the mail should be sent to...
View 1 Replies View RelatedHow To Pass In The Current Database, Server Name To A Sendmail Task
Sep 28, 2006Hi all--I am writing a DTS package looking to back up all databases in sequence from a specific instance of SQL Server. I am calling CDOSYS in a stored procedure from support.microsoft.com to send email upon failure. I have two types of SQL tasks I am writing into the DTS package:
1. backup database <database> to disk = '<drive>:<path>.bak' with init
2. Upon failure of a particular database to back up to file, execute the following SQL task:
declare @srvname varchar(128),
@db_name varchar(128),
@msg nvarchar(4000)
SELECT @srvname = @@servername
select @db_name = db_name()
set @msg = 'Hi--check your database backups. The ' + @db_name + ' database backup on ' + @srvname + ' has failed.
Thanks--SQL Server';
SELECT @srvname, @db_name, @msg
(Many thanks to Whitney Weaver and SQL_Menace for help with sections of this code)
Upon success of #1 and/or #2, go on to the next database, repeating cycle of the SQL tasks above for the next database in the task. For example, this logic goes like:
1. Back up master database; if fails, send email in SQL task; if either task is successful, goto database #2;
2. Back up model database; ...<etc>.
My problem is the current database set in @db_name. I apparently need to reset this variable for each database that gets backed up, and I can't seem to get these set as values to be passed from SQL Task #1 to SQL Task #2. Any suggestions on how I might achieve this?
- Jonathan
Sendmail Task From Address From A Database In SSIS Package.
Apr 16, 2008Hi,
I have a sendmail task in my ssis package. In the From field, if i hardcode my from and to address as user@company.com it works fine and mail is sent. But i want to read the from and to values from a database table. SO i defined the package level variables and getting the values into the variables. SO at From if i specify the variable name it gives a compiel time error"the address in th from line is mal formed. it is either missing @ character or not valid".
how do i specify teh variable for from address? I feel, may be i can use expression, but i don't know how to do that.
Can anyone help me with this?
Thanks in advance,
Integration Services :: One SendMail Task For Multiple Sequence Containers
Sep 9, 2014I have multiple sequence containers in my package. I only want to have one sendmail task for the failure/completion of the package. If I put the sendmail task in the last sequence container and the first seqence fails, the sendmail task will not be reached and therefore, no email will be sent out.Is there a way to have one sendmail task for all the sequence containers and allow it to send mail regardless of what sequence fails/completes?
View 4 Replies View RelatedSendmail...Urgent Please!!
Jul 21, 2000When I am executing the following sendmail code,it is apending the results to the mail.But I want the results to be sent as attachment,in .txt format.
exec master..xp_sendmail
@recipients='Tpolasp@hotmail.com',
@query='c2usa..sp_report_daily_pc',
@attach_results='true',
@subject='Daily fastquotes'
Interestingly,even if I use @attachments option by giving a specific file name,then also it is sending the mail in which the contents of the attached file are appended to the mail!
Is there anything that I shall configure somewhere to make it behave properly?
I am using 7.0 standard edition with no SP.Any help is greatly appreciated.
Thanks.
Sendmail In Sql2000
May 2, 2008hi
how to sendmail in sql2000
Sendmail Error: Urgent!
Aug 29, 2001--------------------------------------------
Declare @filename char(22)
Declare @cmd char(100)
Select @filename = '"' + 'D:Feedsest_' + substring(convert(char(12), getdate(), 12), 3, 4) + substring(convert(char(12), getdate(), 12), 1, 2) + '"'
Select @cmd = "xp_sendmail @recipients = 'test@test.com'
, @attachments = " + @filename + " "
exec(@cmd)
Go
--------------------------------------------
Above T-SQL step is causing the following error:
Server: Msg 103, Level 15, State 7, Line 6
The identifier that starts with 'xp_sendmail @recipients = 'test@test.com'
is too long. Maximum length is 128.
Any help??Thanks.
Sendmail Question...URGENT!!
Jul 18, 2000When I am executing the following sendmail code,it is apending the results to the mail.Actually, I want the results to be sent as attachment,in .txt format.
Any help is greatly appreciated.
exec master..xp_sendmail
@recipients='Tpolasp@hotmail.com',
@query='c2usa..sp_report_daily_pc',
@attach_results='true',
@subject='Daily fastquotes'
Thanks.
Sendmail With Parameters Problem...URGENT!!
Aug 30, 2001I have a step like this: I am getting the following error:How to code @attachments in quotes?? thanks.
The name specified is not recognized as an
internal or external command, operable program or batch file.
(2 row(s) affected)
Here is my T_SQL step:
Declare @filename char(22)
Declare @cmd char(100)
Select @filename = 'D:Feedsest_' + substring(convert(char(12), getdate(), 12), 3, 4) + substring(convert(char(12), getdate(), 12), 1, 2)
EXEC xp_cmdshell @recipients = 'test@test.com'
, @attachments = @FileName
Xp Sendmail Says 'mail Sent' But No Email Arrives
Sep 14, 2004I have setup SQL Mail on a SQL Server 2000 (service pk 3a) with outlook 2002.
SQL Mail give me the success message when I test the profile.
When I send a test message to an operator from SQL Agent it works fine.
When I send a message from the Outlook 2002 client (logged in as the Service-SQL domain account), I can send a message without a problem.
However, when I send an xp_sendmail message (xp_sendmail @recipients='email@address',@message='test',@subje ct='test') it tells me 'Mail Sent' in the result window, but the email never arrives or shows up in the 'sent items' folder in outlook 2002.
Anyone else have this issue.
Thanks - Rick
How Do You Send The Result Of A Query By SendMail?
Apr 19, 2007For example the result of an Execute T-SQL Statement task.
This task does not have a hook-up for variable assignment, the SendMail can take in a variable. How do you pass the result of EXEC T-SQL statement be assigned to the variable in the SendMail task?
Execute SendMail Depending On A Condition
Apr 17, 2008
Hello All,
I have an Execute SQL Task and a SendMail in the control flow of my package.
If the Execute SQL Task inserts records in the Database, I want the SendMail task to be executed.
But if Execute SQL Task does not inserts even a single record in the Database, I dont want the SendMail task to be executed.
How can I achieve this...
Thanks,
Kapadia Shalin P.
Column Size In Emails Generated Using XP Sendmail
Dec 14, 2007Hi, with some help today I was able to get my stored procedure runningand have the results emailed to me. However, this is how its showingup:Accounting_Year WK_IN_FYEAR LocationGL_AccountCol Data Difference--------------- ----------- ------------------------------------------------------------------ -------------------- --------------------2007 49 Test1500-001-2587872.0200 -2587872.0200 .00002007 49 Test2500-001-3344713.5000 -3344713.5000 .00002007 49 Test3500-001Is there anyway to line them up side by side properly? When i have twocolms selected the format comes out ok. Thanks for all the helpagain!Here is the sp:CREATE PROCEDURE [dbo].[spEmailVariance](@SubjectLine as varchar(500),@EmailRecipient VARCHAR(100))ASDECLARE @strBody varchar(5000)set @SubjectLine = 'Weekly Flash Update'SET @strBody ='Select statement'exec master.dbo.xp_sendmail@recipients= 'XX@XXXX.com',@subject= @SubjectLine,@query = @strbodyRETURNGO
View 2 Replies View RelatedHow Do I Convey Information With SSIS SendMail Notification
May 24, 2007How do I Convey Information using Notification - can someone please explain?
View 4 Replies View RelatedWill Not Accept Apostrophe
Mar 7, 2005I get this error when the user inputs a word with an apostrophe:
Incorrect syntax near 't'. Unclosed quotation mark before the character string '
Using c# this is the input command:
oCom=new SqlCommand(string.Format("INSERT INTO [database] ([name],[address], [issue],[comments],[timestamp]) VALUES({0},'{1}','{2}','{3}','{4}",val[0],val[1],val[2],txtComment.Text,tmStamp),oCon);
When users enter a comment with an aprostrophe it gives me an error, using a session array and convert it to a string[].
Any ideas?
Thanks
How To Accept More Than 4000 Characters?
Aug 3, 2007Hi all,I'm using MSSQL 2005, using the nvarchar(MAX) but it doesn't seems to take more than 4000 characters... Any idea why?Thank you,Kenny.
View 6 Replies View RelatedCan IN Clause Accept A Parameter Value?
Jun 19, 2000I'm trying to write an SP which takes a string parameter like '1,3,6,9' and then uses it in an IN clause of a SELECT statement to return a recordset, along the lines of:
SELECT
custname
FROM
mytable
WHERE theid IN @myparameter
...any ideas how to get this kind of thing to work. In the example, theid is a numeric value. What it needs to do, I guess, is do a string replacement of the parameter value, but the SP naturally enough attempts to compare the numeric theid value with the string @myparameter value and fails. It works OK if there's only one value in the string, because the server auto-converts the paremeter into a numeric, but if there are 2 or more values in the string then the server obviously can't do the conversion. How can I make this work?
SQL Server 2014 :: Send CSV File With DB Sendmail - Missing Records
May 19, 2015I am trying to send a csv file with 15000 records via the database mail in SQL Server 2014. The problem is that when I open my email the csv only contains 209 records. I have tried the same thing in SQL Server 2012 and it works as expected - it sends the 15000 records in the csv.
I have tested this on several sql servers with 2014 edition on them, and I have the same issue on all of them. The query breaks off at different points on each sever - for example one of them breaks off at 209 records as i said above, another one at 307. The last record always gets truncated at the same place. The csv attachment size it's about 64 kb - which is well below the 4MB limit i've configured the database Maximum File Size bytes parameter.
What i am doing basically is creating a job that is meant to execute a stored procedure and send the results in a csv in an email. The stored procedure is something like:
select col1, col2, col3
from table A1
where col1 > 1000 order by col1
Getting Query Is Accept Null Values
Mar 18, 2008I am trying to have a query with the option for items to be null. (So users don't need to fill in the other fields if they choose not too) SELECT Tickets.TicketID, Tickets.UserID, Tickets.SystemID, Tickets.Title, Tickets.Description, Tickets.Software, Tickets.Date, Systems.OS, OS.OS AS OstitleFROM Tickets INNER JOIN Systems ON Tickets.SystemID = Systems.SystemID INNER JOIN OS ON Systems.OS = OS.osIDWHERE (Tickets.Title LIKE '%' + @title + '%') AND (Tickets.Software LIKE '%' + @software + '%') AND (Tickets.Description LIKE '%' + @descrip + '%') AND (Systems.OS = @osid) OR (@osid IS NULL)This works when i give the LIKE values % as a parameter. So they can choose to search by title + software but not description or description and nothing else etc etc etc. The problem is, the osid. If I give it a value it works but if i try to do null, *. or % it always displays every item in the databse ignoring any of the previous like statements. Anyone have an idea?
View 3 Replies View RelatedData Type That Accept . For MSSQL
Sep 24, 2004Hi,
I wish to enter some string data with period(.) in a column with char type. It doesn't accept period(.) What data type should I choose for this field ?
I'm using MSSQL Server 2000.
Please advice.
Accept NULL Value And Convert It To Default Value...
Feb 14, 2008Is there any way to make a column to accept NULL but stores it as default value of Column Property?
View 14 Replies View RelatedSQL Endpoint, Won't Accept NTLM Credentials
Mar 4, 2008Hello. I have set up an SQL Endpoint using NTLM authentication. When I try to retrieve the WSDL file I am prompted for credentials. I put in username/password (this user has Connect access to the Endpoint) but its not accepted. The dialog reappears. The SQL error log shows an HTTP authentication failed error. I've triple checked that the username/password is correct.
Now here's the strange part: the same endpoint (exact same code for setting up endpoint, permissions, user, etc.) works just fine on another box (username/password is accepted and WSDL is shown). This leads me to believe that the problem isn't with SQL or the endpoint, but someplace else. I really don't know how to debug this one.
I Can't Get A SQL QUery To Accept A Null For A Parameter
Mar 1, 2007I have straight forward Insert Query, which takes values mainly from text boxes, however I am having trouble when the value is null.
eg
cmdP0.Parameters["@EmpID"].Value=txtEmpNo.Text;
When I run the Query I get...
Message="Parameterized Query '(@ID int,@EmpID int,@Photo nvarchar(260),@DoB smalldatetime,@Med' expects parameter @EmpID, which was not supplied."
I also get this when the parameter can be a string.
I have set the parameter properties so that SourceColumnNullMaping to true (it was set as false - so hoped this might fix it!)
No luck.
How To Make A Db Readonly To Accept Tran Logs?
Jun 21, 2004Hi experts,
Pls let me know , how to make normal db to readonly + accept tran logs
Rgds
Srinivas Varanasi.
Primary Key Means It Should Not Accept Null Values Is It?
Sep 15, 2004Friends,
I am inserting a value from vb.net to sql server 7.
i created a table in the sqlserver with primary key.
In VB.net form i didnt check the values of the check box.
when i try to save the empty or null the sql server should throw the error. but its accepting the null value.
how is it possible?
can anyone help me?
FYI:
table name: JobMast
Fields:
jobcode int primary key
jobtitle varchar(10)
SQL 2012 :: How To Add A Table Constraint That Will Only Accept Values Y Or N
Oct 21, 2015Create table enrollment_in
BEN_DENT VARCHAR(1)
What I need is a constraint to limit the values to Y or N
How To Change In SQL 2005 And Accept The Bin Caracter And The Langage
Aug 26, 2007Hello
I am newbies with SQL 2005
I want install Windows sharepoint services 3 in french on my SBS 2003 R2 SP2 also in frecnh langage and at the end of the install, a message say to me :
Bin caracter are not accepted in your configuration SQL
Langage is not correct (I have French_CS_AS)
Where is possible to change these parameters ?
I try to find but never find
Thank You in advance for your help
++
Michel
If you have the answer in French it's better for me but not neccessary !
Does Dtsinstall.exe Accept Any Command Line Parameters?
Sep 13, 2007The question is in the title.
StringStartsWith Can't Accept Null Parameters Error
Apr 7, 2008Hi
I am trying to view my reporting service web site for the first time,
but I've got this Error message "StringStartsWith can't accept null parameters"
I am using Widows Vista and
Report Manager and Report Server Web site has been set to Default web Site and
Windows Server Identity.BuiltIn Account has been set to Local System and
Web Service Identity.ReportServer and Report Manager has been set to Classic .Net App Pool.
Can anybody help me on this issue.
Best Regards
How Do I Use SendMail Option In The Integration Services - I Found The Code On MSDN, But, How Do I Make It Workable?
May 14, 2007if I have the following code:
using Microsoft.SqlServer.Dts.Runtime;
using Microsoft.SqlServer.Dts.Tasks.SendMailTask;
class TestSendMailTask
{
public static void Main()
{
Package pkg = new Package();
ConnectionManager smtpCM;
smtpCM = pkg.Connections.Add("SMTP");
smtpCM.Name = "SMTP Connection Manager";
smtpCM.ConnectionString = "smtphost";
Executable exe = pkg.Executables.Add("STOCKendMailTask");
TaskHost thSendMailTask = (TaskHost)exe;
{
thSendMailTask.Properties["SmtpConnection"].SetValue(thSendMailTask, "SMTP Connection Manager");
thSendMailTask.Properties["ToLine"].SetValue(thSendMailTask, "someone1@example.com");
thSendMailTask.Properties["CCLine"].SetValue(thSendMailTask, "someone2@example.com");
thSendMailTask.Properties["BCCLine"].SetValue(thSendMailTask, "someone3@example.com");
thSendMailTask.Properties["FromLine"].SetValue(thSendMailTask, "someone4@example.com");
thSendMailTask.Properties["Priority"].SetValue(thSendMailTask, MailPriority.Normal);
thSendMailTask.Properties["FileAttachments"].SetValue(thSendMailTask, "C:\test_image.jpg");
thSendMailTask.Properties["Subject"].SetValue(thSendMailTask, "Testing the SendMail Task");
thSendMailTask.Properties["MessageSourceType"].SetValue(thSendMailTask, SendMailMessageSourceType.DirectInput);
thSendMailTask.Properties["MessageSource"].SetValue(thSendMailTask, "This is only a test.");
}
DTSExecResult valResults = pkg.Validate(pkg.Connections, pkg.Variables, null, null);
if (valResults == DTSExecResult.Success)
{
pkg.Execute();
}
}
}
-------
How do I make it a workable package so it compiles , w/ javadoc style comments and instructions, so, other people can use it?