Does My Procedure Execute Right? Access Issue ?
Dec 13, 2007
Hi.
I have made a managed stored (external) procedure and a assembly using Sql Server and VS.
Testing this with EXEC dbo.SqlServerProject3 gives not the wanted output, only "Command(s) completed successfully".
When I test the same C# code from an console application (exe) the program is ok.
EXEC master ..xp_cmdshell 'c: empdivConsoleApplication1.exe'
I want to call the procedure from a trigger, but the program that fires the trigger and the exe gives an error message (but works).
Is this some access issue ?
Please help.
Ivar
View 7 Replies
ADVERTISEMENT
Jul 2, 2014
I would like to provide the db_datareader and db_executor role to a particular SQL Server Login in a database
But, I would like to avoid any INSERT's, UPDATE's or DELETE's that may happen by calling the stored procedures
I tried assigning the db_denydatawriter role but it doesn't seem to be doing the trick as the INSERT's, UPDATE's and DELETE's were still working
Is there any way to provide the db_datareader and db_executor role but avoid any DML actions.
View 7 Replies
View Related
Sep 5, 2007
I am not able to right click to execute a stored procedure or right click to access the stored procedure properties using Management Studio. Any ideas on what is causing this or if it is supposed to be this way?
Any help is much appreciated.
View 2 Replies
View Related
May 31, 2007
I have some applications in Access and I execute a DTS from there, Can I execute a SSIS package fron access?
Regards
View 3 Replies
View Related
Nov 21, 2006
Hi While we are migrating Access Database to SQL Server, we would like to keep the Access Database running on schedule in steps until we migrate everything in SQL Server. I have created a SQL Server Job under “Operating System Command (CmdExec)� and in command, pointed where the Access Database is located.
I have created this job as an Admin, so admin has full rights. But when I run this job it does not execute Access Database and gives an error. Following (under dotted line) is the error from Event Log.…………………………………………………..Event Type: WarningEvent Source: SQLSERVERAGENTEvent Category: Job Engine Event ID: 208Date: 11/21/2006Time: 9:15:53 AMUser: N/AComputer: SqlServer01Description:SQL Server Scheduled Job 'Test' (0x86BC5A6881DF1E48BF270E6513B2A0DD) - Status: Failed - Invoked on: 2006-11-21 09:15:51 - Message: The job failed. The Job was invoked by User admin. The last step to run was step 1 (test).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.……………………………………………………
I had replaced access database with some exe file then ran the job. Job ran fine. Why SQL Server job is not able to execute Access Database?
Note: SQL Server has Access Database installed.
Please let me know. I know this is not a very common situation but this is also an option available to utilize.
ThanksRashid
View 1 Replies
View Related
Mar 11, 2004
Can the DTS execute SQL task recognize a table in an Access database that is linked from another Access database?
I'm attempting to use a DTS Execute SQL task connected to Access1.mdb to make a new table in Access1.mdb that is using a Subquery from a linked table in Access2.mdb . (I know it sounds convoluded..) Its giving me an error in my FROM clause as if it can't recognize the linked table from Access2.mdb.
The reason why I'm doing this is that I'm not sure how to run an Access make table query from DTS that will overwrite the existing table in Access. I get an error that the table already exists.
Any Help?
View 1 Replies
View Related
Jul 20, 2005
Hello,Access XP, SQL Server 2000Is it possible to hide a SP under Queries in Access, yet still be ableto Execute it from Access?We hooked up a custom form to accept the input parameters (MS FeatureRequest!) for the Stored Procedure. We had two problems with MS's'Input Parameter' dialog: 1) We could not customize, 2) We continuallyreceived a message from Access stating, "The stored procedure executedsuccessfully but did not return records" ('SET NOCOUNT ON' gave nojoy).Below is the sample code we are using.TestInsert is the SPtxtName is a text box on the form@name is char(80)Private Sub cmdAdd_Enter()Dim cmd As New ADODB.CommandDim par As ParameterSet cmd.ActiveConnection = CurrentProject.Connectioncmd.CommandText = "TestInsert"cmd.CommandType = adCmdStoredProcSet par = cmd.CreateParameter("@name", adVarChar, _adParamInput, Len(txtName), txtName)cmd.Parameters.Append parcmd.ExecuteSet cmd = NothingEnd SubAny help would be appreciated. We successfully hid our Tables, andallowed access through Views. But we can't seem to find a good workaround here.ThanksJeffJeffrey Waltonnoloader
View 4 Replies
View Related
Mar 22, 2006
Hi,
I sometimes come accross this error when I attempt to execute an isolated task in the control flow. What is funny is that I am still able to debug the package.
It eventually resolves after a while. What could it be?
Thanks
Philippe
TITLE: Microsoft Visual Studio
------------------------------
Access Denied. (Exception from HRESULT: 0x80030005(STG_E_ACCESSDENIED))
------------------------------
BUTTONS:
OK
------------------------------
View 7 Replies
View Related
Nov 17, 2006
Hi
Does any one know how to execute Macros in SSIS Package.
I have an Access 2003 Macro which has to be executed in a SSIS package...
I need to pass some runtime parameter also .
How to go about it....
Thanks & Regards
Deepu M.I
View 6 Replies
View Related
Jul 12, 2007
Hi all,
I have an error when a package is trying to execute a SubPackage using the "Execute Package Task". I have this problem for all packages that are running sub packages.
The packages are stored in the DTSPackages folder of the SQL Server installation folder.
The master package is called from an Event Handler on a document library in MOSS 2007.
The account from the Sharepoint Application Pool has Full Control on the DTSPackages folder.
What am I missing ?
View 2 Replies
View Related
Jan 12, 2007
For some reason, I run a stored procedure in Query Analyzer and it works fine. When I run the very same procedure in MS access by clicking on its link I have to run it twice. The first run gives me the message that the stored procedure ran correctly but returned no records. The second run gives me the correct number of records but I have to run it twice. I am running month-to-month data. The first run is Jan thru March. Jan and Feb have no records so I run three months on the first set. The ensuing runs are individual months from April onward. The output is correct but any ideas on why I have to do it twice in Access? I am a bit new to stored procedures but my supervisor assures me that it should be exactly the same.
ddave
View 2 Replies
View Related
Aug 7, 2006
Hi,I am having
some trouble copying data over my workgroup network from my Windows
2003 Server Machine (machineA with SQL SERVER 2005) to one of my
network Machine's drive(MachineB).Here is the T-SQL code that I am trying to execute:EXEC xp_cmdshell 'copy D:Datafile.txt \MachineBDocuments'Whenever
I tried to execute the above piece of code, I get the error message
"Access is denied", but if I try to copy the file from the Command
Prompt (cmd.exe) with the copy command, the file copies fine over the
network.I have already searched over the internet and I found
out that loads of people have the same issue, and they were suggested
something like this:"Check in Services and make sure that the MSSQLServer service is run as
a domain user and that domain user has rights to these network
resources."Well
it sounds plausible, but I don't know what are the exact steps to do
this. How do I know which user is running the MSSQL Server service? Are
they referring to the user which I use to connect to my SQL Server
Database engine throuhg the SQL Server Management Studio?Also they are suggesting 'domain user', and as I said before I do not have domain network just regular simple workgroup network.Here
are some details of the user that I use to login. I generally login
into my Windows 2003 Server machine with user called 'User1' and I use
the same 'User1' to connect to SQL Server through the Management Studio
Screen.Should I create a user called 'User1' on my MachineB(Destination Machine)?I would really appreciate, if someone can give me detailed steps explaning how to solve this problem.Thank you very much once again.
View 11 Replies
View Related
Aug 7, 2006
Hi,
I am having some trouble copying data over my workgroup network from my Windows 2003 Server Machine (machineA with SQL SERVER 2005) to one of my network Machine's drive(MachineB).
Here is the T-SQL code that I am trying to execute:
EXEC xp_cmdshell 'copy D:Datafile.txt \MachineBDocuments'
Whenever I tried to execute the above piece of code, I get the error message "Access is denied", but if I try to copy the file from the Command Prompt (cmd.exe) with the copy command, the file copies fine over the network.
I have already searched over the internet and I found out that loads of people have the same issue, and they were suggested something like this:
"Check in Services and make sure that the MSSQLServer service is run as
a domain user and that domain user has rights to these network
resources."
Well it sounds plausible, but I don't know what are the exact steps to do this. How do I know which user is running the MSSQL Server service? Are they referring to the user which I use to connect to my SQL Server Database engine throuhg the SQL Server Management Studio?
Also they are suggesting 'domain user', and as I said before I do not have domain network just regular simple workgroup network.
Here are some details of the user that I use to login. I generally login into my Windows 2003 Server machine with user called 'User1' and I use the same 'User1' to connect to SQL Server through the Management Studio Screen.
Should I create a user called 'User1' on my MachineB(Destination Machine)?
I would really appreciate, if someone can give me detailed steps explaning how to solve this problem.
Thank you very much once again.
View 18 Replies
View Related
Feb 7, 2007
Hello,I have an SQL procedure as follows: ... INSERT dbo.Levels (LevelName) VALUES (@LevelName) ... LevelName is an input parameter of nvarchar type. What should be the best way to execute this procedure from my C# / VB.Net code? And what would it return?Thanks,Miguel
View 7 Replies
View Related
Jan 24, 2004
Hi All
I have a stored procedure, sp_GetNameDetail, which return a one row, multiple columns result set.
Yet I have another storede procedure which would call sp_GetNameDetail, and would like to access this result set. Is there a way I can do this?
Thanks,
View 1 Replies
View Related
May 12, 2015
Is there a way i can grant a windows authenticated user say abcadam privilege:
-> to create, execute and alter the stored procedures that will be created by him only:
Point is we do not want the user to execute alter or modify other stored procedures out there for that DB
View 13 Replies
View Related
Nov 18, 2015
In my ssis 2012 package, I have a 'object' type variable with some table like records. I want to do some SQL operations like insert/update on the records in another table based on this 'Object' type variable records. Basically I want to use a MERGE statement with another physical table with the records in the 'Object' type variable.how to map/use the Object type variable in Execute sql task.I am not good in script task. How to utilize this Object variable in a Execute sql task? Â
View 9 Replies
View Related
Apr 14, 2004
Hi,
Can anybody please tell me if it is possible to execute an url from stored procedure.
thanks in advance,
preeth
View 1 Replies
View Related
Mar 18, 2002
Hi!!!
i have a problem. I want to execute a sp from a DTS package but it doesn't work correctly. If i execute it from the query analyzer it work fine.
I have configured merge replication with pull subscription on the data base.
If someone can help me i will apreciate.
View 2 Replies
View Related
Aug 10, 2000
Hello:
I have created a stored procedure that will backup and restore a database.
I would like to be able to execute this sp using public rights - any ideas?
Thanks
View 1 Replies
View Related
Feb 9, 2001
I am trying to set up a security system for my senior developers where they automatically can execute any procedure. It is in the System Administrator server role. Is there any way I can grant this role to their database role withour giving them complete System Adminstrator rights?
View 3 Replies
View Related
Jun 14, 2008
How can I use in stored procedure the faction ‘’in’’ to select values, using execute and the values must not be specified before in the stored procedure
View 6 Replies
View Related
Jul 23, 2005
How do you execute a stored procedure in MS SQL Server?I can design and execute them from MS Access dev front end, but cannot seemto find how to run them in the Enterprise Manager.TIA.~ Duane Phillips.
View 2 Replies
View Related
Mar 29, 2006
I have setup a user which has execute rights on a stored procedure. The sp is owned by dbo. The user can execute the stored procedure, but it fails, because the stored procedure calls other tables and procedures that the user does not have rights to. Is there a way to allow those procedures to execute without allowing access to everything else for the user I setup? Thanks!
View 3 Replies
View Related
Oct 27, 2006
I need to disable and move orphaned computer objects in my Active Directory. The SQL Agent has permission to do this. I have created a stored procedure for the task with intentions of executing it with sp_start_job. However, I cannot execute it in SQL 2005. How can I grant permission to this (login) to execute sp_start_job? This is all run from a web page and NOT the Query Window.
View 1 Replies
View Related
Oct 13, 2007
How I can execute DTS packet form sql procedure ??
View 2 Replies
View Related
Oct 17, 2007
Please anyone help me with my question
How do I execute a stored Procedure using SSIS ?
I have a stored procedure in SQL SERVER 2005 database that I need to execute using a SSIS package using Execute SQL Task from Toolbox in Visual studio 2005
Thanks,
George
View 2 Replies
View Related
Jan 22, 2008
Hi,
I am strugling to execute a insert stored procedure on a button click. The stored procedure is taking values from a temp table and inserting them into a identical table. The procedure is expecting 1 value from a Query string, the stored procedure works as expected when hard coded.
Im completely new to this and have no idea where to begin, i have been looking through the forums for several hours and am still none the wiser.
please can someone point me in the right direction
View 13 Replies
View Related
Aug 24, 2004
hi to all,
i have a stored procedure and i want to run a program from it..
i think that i need use api functions but how can i do that..
if there is a nother ways please tell me..
thanx..
View 3 Replies
View Related
Jul 17, 2005
I have a button in a form that I want to execute a simple stored procedure to insert a single value into a database table. The Stored Procedure is:=================CREATE PROCEDURE bplog_insert_invoice_detail (@invo_Id Int) ASINSERT INTO Invoice_Detail (Invo_Id) VALUES(@Invo_Id)GO=================How do i pass the value from and text field (@invo_id) and execute the stored procedure when a button is clicked.Regards.
View 1 Replies
View Related
Oct 31, 2005
Hello,I was wondering if it is possible to dynamically execute a stored procedure; for example, in SQL, you can do:insert into Table1( id, name)select id, namefrom Table2Can you do something like:exec spProc @id = id, @name = namefrom Table1Or something like that? I know I can select a row at a time and execute, or write a program, but I was looking to see if there was an easier way.Thanks.
View 1 Replies
View Related
Nov 1, 2005
Can I write a procedure that should connect to a different SQL server and execute a series of SELECT statement on that SQL SERVER.Reason being is I do not have permission to create procedure on that destination server while I have permission to execute a SELECT statement. Please clarifyThanks,
View 3 Replies
View Related
